cat /proc/tty/driver/serial serinfo:1.0 driver revision: 0: uart:16550A port:000003F8 irq:4 tx:0 rx:0 RTS|CTS|DTR|DSR|CD 1: uart:unknown port:000002F8 irq:3 cat /proc/interrupts CPU0 0: 6011 XT-PIC-XT timer 2: 0 XT-PIC-XT cascade 4: 0 XT-PIC-XT serial 8: 0 XT-PIC-XT rtc 10: 175 XT-PIC-XT eth0 11: 13 XT-PIC-XT eth1, eth2 14: 20579 XT-PIC-XT ide0 NMI: 0 Non-maskable interrupts LOC: 0 Local timer interrupts RES: 0 Rescheduling interrupts CAL: 0 function call interrupts TLB: 0 TLB shootdowns TRM: 0 Thermal event interrupts SPU: 0 Spurious interrupts ERR: 0 MIS: 0 cat /proc/devices Character devices: 1 mem 4 /dev/vc/0 4 tty 4 ttyS 5 /dev/tty 5 /dev/console 5 /dev/ptmx 7 vcs 10 misc 13 input 90 mtd 108 ppp 128 ptm 136 pts Block devices: 3 ide0 31 mtdblock dmesg Linux version 2.6.25.16 (roman@orion) (gcc version 4.1.2) #13 SMP Mon Sep 29 02:53:15 EEST 2008 BIOS-provided physical RAM map: BIOS-e820: 0000000000000bc8 - 00000000000a0000 (usable) BIOS-e820: 0000000000100000 - 000000000ffe0000 (usable) 255MB LOWMEM available. Scan SMP from c0000000 for 1024 bytes. Scan SMP from c009fc00 for 1024 bytes. Scan SMP from c00f0000 for 65536 bytes. Entering add_active_range(0, 0, 65504) 0 entries of 256 used Zone PFN ranges: DMA 0 -> 4096 Normal 4096 -> 65504 Movable zone start PFN for each node early_node_map[1] active PFN ranges 0: 0 -> 65504 On node 0 totalpages: 65504 DMA zone: 32 pages used for memmap DMA zone: 0 pages reserved DMA zone: 4064 pages, LIFO batch:0 Normal zone: 479 pages used for memmap Normal zone: 60929 pages, LIFO batch:15 Movable zone: 0 pages used for memmap DMI not present or invalid. Allocating PCI resources starting at 10000000 (gap: 0ffe0000:f0020000) Built 1 zonelists in Zone order, mobility grouping on. Total pages: 64993 Kernel command line: block2mtd.block2mtd=/dev/hda2,131072,rootfs root=/dev/mtdblock0 rootfstype=jffs2 init=/etc/preinit noinitrd console=ttyS0,38400n8 No local APIC present or hardware disabled mapped APIC to ffffb000 (01209000) Initializing CPU#0 PID hash table entries: 1024 (order: 10, 4096 bytes) Detected 498.058 MHz processor. Console: colour dummy device 80x25 console [ttyS0] enabled Dentry cache hash table entries: 32768 (order: 5, 131072 bytes) Inode-cache hash table entries: 16384 (order: 4, 65536 bytes) Memory: 256876k/262016k available (1456k kernel code, 4740k reserved, 595k data, 196k init, 0k highmem) virtual kernel memory layout: fixmap : 0xfffb9000 - 0xfffff000 ( 280 kB) vmalloc : 0xd0800000 - 0xfffb7000 ( 759 MB) lowmem : 0xc0000000 - 0xcffe0000 ( 255 MB) .init : 0xc0308000 - 0xc0339000 ( 196 kB) .data : 0xc026c23c - 0xc030111c ( 595 kB) .text : 0xc0100000 - 0xc026c23c (1456 kB) Checking if this processor honours the WP bit even in supervisor mode...Ok. CPA: page pool initialized 1 of 1 pages preallocated Calibrating delay using timer specific routine.. 997.28 BogoMIPS (lpj=4986430) Mount-cache hash table entries: 512 CPU: L1 I Cache: 64K (32 bytes/line), D cache 64K (32 bytes/line) CPU: L2 Cache: 128K (32 bytes/line) Compat vDSO mapped to ffffe000. Checking 'hlt' instruction... OK. Checking for popad bug... OK. SMP alternatives: switching to UP code Freeing SMP alternatives: 15k freed CPU0: AMD Geode(TM) Integrated Processor by AMD PCS stepping 02 SMP motherboard not detected. Local APIC not detected. Using dummy APIC emulation. Brought up 1 CPUs net_namespace: 452 bytes NET: Registered protocol family 16 PCI: PCI BIOS revision 2.10 entry at 0xfcd03, last bus=0 PCI: Using configuration type 1 Setting up standard PCI resources Linux Plug and Play Support v0.97 (c) Adam Belay PCI: Probing PCI hardware PCI: Probing PCI hardware (bus 00) PCI: Using IRQ router default [1022/2090] at 0000:00:0f.0 NET: Registered protocol family 2 IP route cache hash table entries: 2048 (order: 1, 8192 bytes) TCP established hash table entries: 8192 (order: 4, 65536 bytes) TCP bind hash table entries: 8192 (order: 4, 65536 bytes) TCP: Hash tables configured (established 8192 bind 8192) TCP reno registered scx200: NatSemi SCx200 Driver Registering mini_fo version $Id$ JFFS2 version 2.2. (NAND) (SUMMARY) © 2001-2006 Red Hat, Inc. io scheduler noop registered io scheduler deadline registered (default) isapnp: Scanning for PnP cards... isapnp: No Plug & Play device found Real Time Clock Driver v1.12ac Non-volatile memory driver v1.2 AMD Geode RNG detected Serial: 8250/16550 driver $Revision: 1.90 $ 2 ports, IRQ sharing disabled serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A Uniform Multi-Platform E-IDE driver ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx Probing IDE interface ide0... hda: Hitachi Flash Card, CFA DISK drive Probing IDE interface ide1... ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 hda: max request size: 128KiB hda: 125184 sectors (64 MB) w/1KiB Cache, CHS=978/4/32 hda: hda1 hda2 block2mtd: version $Revision: 1.30 $ Creating 1 MTD partitions on "rootfs": 0x00000000-0x03020000 : "rootfs" split_squashfs: no squashfs found in "rootfs" block2mtd: mtd0: [rootfs] erase_size = 128KiB [131072] PNP: No PS/2 controller found. Probing ports directly. i8042.c: No controller found. mice: PS/2 mouse device common for all mice nf_conntrack version 0.5.0 (4096 buckets, 16384 max) ip_tables: (C) 2000-2006 Netfilter Core Team TCP vegas registered NET: Registered protocol family 1 NET: Registered protocol family 17 802.1Q VLAN Support v1.8 Ben Greear All bugs added by David S. Miller Using IPI Shortcut mode VFS: Mounted root (jffs2 filesystem) readonly. Freeing unused kernel memory: 196k freed Please be patient, while OpenWrt loads ... natsemi dp8381x driver, version 2.1, Sept 11, 2006 originally by Donald Becker 2.4.x kernel port by Jeff Garzik, Tjeerd Mulder PPP generic driver version 2.4.2 IPP2P v0.8.1_rc1 loading ipt_time loading Registered led device: alix:1 Registered led device: alix:2 Registered led device: alix:3 ne2k-pci.c:v1.03 9/22/2003 D. Becker/P. Gortmaker via-rhine.c:v1.10-LK1.4.3 2007-03-06 Written by Donald Becker PCI: Guessed IRQ 10 for device 0000:00:09.0 PCI: Sharing IRQ 10 with 0000:00:0f.3 eth0: VIA Rhine III (Management Adapter) at 0xfebfa000, 00:0d:b9:16:be:0c, IRQ 10. eth0: MII PHY found at address 1, status 0x786d advertising 05e1 Link cde1. PCI: Guessed IRQ 11 for device 0000:00:0a.0 eth1: VIA Rhine III (Management Adapter) at 0xfebfb000, 00:0d:b9:16:be:0d, IRQ 11. eth1: MII PHY found at address 1, status 0x7849 advertising 05e1 Link 0000. PCI: Guessed IRQ 11 for device 0000:00:0b.0 PCI: Sharing IRQ 11 with 0000:00:0f.4 PCI: Sharing IRQ 11 with 0000:00:0f.5 eth2: VIA Rhine III (Management Adapter) at 0xfebfc000, 00:0d:b9:16:be:0e, IRQ 11. eth2: MII PHY found at address 1, status 0x786d advertising 05e1 Link cde1. eth0: link up, 100Mbps, full-duplex, lpa 0xCDE1 Clocksource tsc unstable (delta = 79992572 ns) eth1: link down eth2: link up, 100Mbps, full-duplex, lpa 0xCDE1