coreboot-3.0.986 Fri Nov  7 04:04:37 CET 2008 starting... (console_loglevel=8)
Initial lowest stack is 0x0008fe98
Choosing fallback boot.
LAR: Attempting to open 'fallback/initram/segment0'.
LAR: Start 0xfffc0000 len 0x40000
LAR: seen member normal/option_table@0xfffc0000, size 932
LAR: seen member normal/initram/segment0@0xfffc0400, size 420
LAR: seen member normal/stage2/segment0@0xfffc0600, size 1
LAR: seen member normal/stage2/segment1@0xfffc0660, size 16161
LAR: seen member normal/stage2/segment2@0xfffc45e0, size 311
LAR: seen member bootblock@0xffffafc0, size 20480
LAR: File not found!
LAR: Run file fallback/initram/segment0 failed: No such file.
Fallback failed. Try normal boot
LAR: Attempting to open 'normal/initram/segment0'.
LAR: Start 0xfffc0000 len 0x40000
LAR: seen member normal/option_table@0xfffc0000, size 932
LAR: seen member normal/initram/segment0@0xfffc0400, size 420
LAR: CHECK normal/initram/segment0 @ 0xfffc0400
start 0xfffc0450 len 420 reallen 420 compression 0 entry 0x00000040 loadaddress 0x00000000
Entry point is 0xfffc0490
RAM init code started.
Nothing to do.
printktest1: If the immediately preceding line does not say "Nothing to do.", then execution did not start at main()
Trying absolute call from non-_MAINOBJECT XIP code.
Absolute call successful.
Done.
run_file returns with 0
Done RAM init code
After RAM init, lowest stack is 0x0008fe30
Done printk() buffer move
LAR: Attempting to open 'normal/stage2/segment0'.
LAR: Start 0xfffc0000 len 0x40000
LAR: seen member normal/option_table@0xfffc0000, size 932
LAR: seen member normal/initram/segment0@0xfffc0400, size 420
LAR: seen member normal/stage2/segment0@0xfffc0600, size 1
LAR: CHECK normal/stage2/segment0 @ 0xfffc0600
start 0xfffc0650 len 1 reallen 194788 compression 3 entry 0x00002000 loadaddress 0x0000c44c
LAR: Compression algorithm #3 (zeroes) used
LAR: Attempting to open 'normal/stage2/segment1'.
LAR: Start 0xfffc0000 len 0x40000
LAR: seen member normal/option_table@0xfffc0000, size 932
LAR: seen member normal/initram/segment0@0xfffc0400, size 420
LAR: seen member normal/stage2/segment0@0xfffc0600, size 1
LAR: seen member normal/stage2/segment1@0xfffc0660, size 16161
LAR: CHECK normal/stage2/segment1 @ 0xfffc0660
start 0xfffc06b0 len 16161 reallen 30272 compression 1 entry 0x00002000 loadaddress 0x00002000
LAR: Compression algorithm #1 (lzma) used
LAR: Attempting to open 'normal/stage2/segment2'.
LAR: Start 0xfffc0000 len 0x40000
LAR: seen member normal/option_table@0xfffc0000, size 932
LAR: seen member normal/initram/segment0@0xfffc0400, size 420
LAR: seen member normal/stage2/segment0@0xfffc0600, size 1
LAR: seen member normal/stage2/segment1@0xfffc0660, size 16161
LAR: seen member normal/stage2/segment2@0xfffc45e0, size 311
LAR: CHECK normal/stage2/segment2 @ 0xfffc45e0
start 0xfffc4630 len 311 reallen 5208 compression 1 entry 0x00002000 loadaddress 0x0000aff4
LAR: Compression algorithm #1 (lzma) used
LAR: Attempting to open 'normal/stage2/segment3'.
LAR: Start 0xfffc0000 len 0x40000
LAR: seen member normal/option_table@0xfffc0000, size 932
LAR: seen member normal/initram/segment0@0xfffc0400, size 420
LAR: seen member normal/stage2/segment0@0xfffc0600, size 1
LAR: seen member normal/stage2/segment1@0xfffc0660, size 16161
LAR: seen member normal/stage2/segment2@0xfffc45e0, size 311
LAR: seen member bootblock@0xffffafc0, size 20480
LAR: File not found!
LAR: load_file: No such file 'normal/stage2/segment3'
LAR: load_file_segments: All loaded, entry 0x00002000
Phase 1: Very early setup...
Phase 1: done
Show all devs...
root(Root Device): enabled 1 have_resources 0
cpus(CPU: 00): enabled 1 have_resources 0
domain_0_bus_0_pci_0_0(PCI: 00:00.0): enabled 1 have_resources 0
domain_0_bus_0_pci_1_1(PCI: 00:01.1): enabled 1 have_resources 0
domain_0_bus_0(PCI_BUS: 0000): enabled 1 have_resources 0
domain_0(PCI_DOMAIN: 0000): enabled 1 have_resources 0
Phase 2: Early setup...
dev_phase2: dev root: ops 0x0000aff8 ops->phase2_fixup 0x00000000
dev_phase2: dev cpus: ops 0x00000000 ops->phase2_fixup 0x00000000
dev_phase2: dev domain_0_bus_0_pci_0_0: ops 0x00000000 ops->phase2_fixup 0x00000000
dev_phase2: dev domain_0_bus_0_pci_1_1: ops 0x0000b1b4 ops->phase2_fixup 0x00000000
dev_phase2: dev domain_0_bus_0: ops 0x00000000 ops->phase2_fixup 0x00000000
dev_phase2: dev domain_0: ops 0x0000b104 ops->phase2_fixup 0x00000000
Phase 2: Done.
Show all devs...
root(Root Device): enabled 1 have_resources 0
cpus(CPU: 00): enabled 1 have_resources 0
domain_0_bus_0_pci_0_0(PCI: 00:00.0): enabled 1 have_resources 0
domain_0_bus_0_pci_1_1(PCI: 00:01.1): enabled 1 have_resources 0
domain_0_bus_0(PCI_BUS: 0000): enabled 1 have_resources 0
domain_0(PCI_DOMAIN: 0000): enabled 1 have_resources 0
Phase 3: Enumerating buses...
dev_phase3_scan: scanning root(Root Device)
scan_static_bus for root (Root Device)
cpus(CPU: 00) enabled
domain_0(PCI_DOMAIN: 0000) enabled
domain_0(PCI_DOMAIN: 0000) scanning...
dev_phase3_scan: scanning domain_0(PCI_DOMAIN: 0000)
pci_domain_scan_bus: calling pci_scan_bus
pci_scan_bus start bus->dev domain_0 bus 0
ERROR: pci_scan_bus called with incorrect bus->dev->path.type, path is PCI_DOMAIN: 0000
PCI: pci_scan_bus for bus 00
pci_scan_bus: old_devices domain_0_bus_0, dev for this bus domain_0
PCI: scan devfn 0x0 to 0xff
PCI: devfn 0x0
pci_get_dev: list is NOT NULL, *list is NOT NULL
pci_get_dev: check dev domain_0_bus_0 
pci_get_dev: child domain_0_bus_0(PCI_BUS: 0000) not a pci device: it's type 3
PCI: pci_scan_bus pci_get_dev returns dev None (no dev in tree yet)
new_device: devcnt 1
find_device_operations: check all_device_operations[i] 0x0000b0ac
find_device_operations: cons 0x0000b0ac, cons id PCI: 1013:00b8
find_device_operations: check all_device_operations[i] 0x0000b104
find_device_operations: cons 0x0000b104, cons id PCI_DOMAIN: 8086:7190
find_device_operations: check all_device_operations[i] 0x0000b1b4
find_device_operations: cons 0x0000b1b4, cons id PCI: 8086:7010
constructor: constructor is 0x00000000
No ops found and no constructor called for PCI: 8086:1237.
find_device_operations: check all_device_operations[i] 0x0000b0ac
find_device_operations: cons 0x0000b0ac, cons id PCI: 1013:00b8
find_device_operations: check all_device_operations[i] 0x0000b104
find_device_operations: cons 0x0000b104, cons id PCI_DOMAIN: 8086:7190
find_device_operations: check all_device_operations[i] 0x0000b1b4
find_device_operations: cons 0x0000b1b4, cons id PCI: 8086:7010
set_pci_ops: dev dynamic PCI: 00:00.0 set ops to type 0
PCI: 00:00.0 [PCI: 8086:1237] enabled
PCI: pci_scan_bus pci_probe_dev returns dev dynamic PCI: 00:00.0
Not a multi function device, or the device is not present. Skip to next device.
PCI: devfn 0x8
pci_get_dev: list is NOT NULL, *list is NOT NULL
pci_get_dev: check dev domain_0_bus_0 
pci_get_dev: child domain_0_bus_0(PCI_BUS: 0000) not a pci device: it's type 3
PCI: pci_scan_bus pci_get_dev returns dev None (no dev in tree yet)
new_device: devcnt 2
find_device_operations: check all_device_operations[i] 0x0000b0ac
find_device_operations: cons 0x0000b0ac, cons id PCI: 1013:00b8
find_device_operations: check all_device_operations[i] 0x0000b104
find_device_operations: cons 0x0000b104, cons id PCI_DOMAIN: 8086:7190
find_device_operations: check all_device_operations[i] 0x0000b1b4
find_device_operations: cons 0x0000b1b4, cons id PCI: 8086:7010
constructor: constructor is 0x00000000
No ops found and no constructor called for PCI: 8086:7000.
find_device_operations: check all_device_operations[i] 0x0000b0ac
find_device_operations: cons 0x0000b0ac, cons id PCI: 1013:00b8
find_device_operations: check all_device_operations[i] 0x0000b104
find_device_operations: cons 0x0000b104, cons id PCI_DOMAIN: 8086:7190
find_device_operations: check all_device_operations[i] 0x0000b1b4
find_device_operations: cons 0x0000b1b4, cons id PCI: 8086:7010
set_pci_ops: dev dynamic PCI: 00:01.0 set ops to type 0
PCI: 00:01.0 [PCI: 8086:7000] enabled
PCI: pci_scan_bus pci_probe_dev returns dev dynamic PCI: 00:01.0
PCI: devfn 0x9
pci_get_dev: list is NOT NULL, *list is NOT NULL
pci_get_dev: check dev domain_0_bus_0 
pci_get_dev: child domain_0_bus_0(PCI_BUS: 0000) not a pci device: it's type 3
PCI: pci_scan_bus pci_get_dev returns dev None (no dev in tree yet)
new_device: devcnt 3
find_device_operations: check all_device_operations[i] 0x0000b0ac
find_device_operations: cons 0x0000b0ac, cons id PCI: 1013:00b8
find_device_operations: check all_device_operations[i] 0x0000b104
find_device_operations: cons 0x0000b104, cons id PCI_DOMAIN: 8086:7190
find_device_operations: check all_device_operations[i] 0x0000b1b4
find_device_operations: cons 0x0000b1b4, cons id PCI: 8086:7010
find_device_operations: match
constructor: constructor is 0x0000b1b4
default device constructor called
set_pci_ops: dev dynamic PCI: 00:01.1 already has ops of type 20504349
PCI: 00:01.1 [PCI: 8086:7010] enabled
PCI: pci_scan_bus pci_probe_dev returns dev dynamic PCI: 00:01.1
PCI: devfn 0xa
pci_get_dev: list is NOT NULL, *list is NOT NULL
pci_get_dev: check dev domain_0_bus_0 
pci_get_dev: child domain_0_bus_0(PCI_BUS: 0000) not a pci device: it's type 3
PCI: pci_scan_bus pci_get_dev returns dev None (no dev in tree yet)
PCI: devfn 0xa, bad id 0xffffffff
PCI: pci_scan_bus pci_probe_dev returns dev None (no response)
PCI: devfn 0xb
pci_get_dev: list is NOT NULL, *list is NOT NULL
pci_get_dev: check dev domain_0_bus_0 
pci_get_dev: child domain_0_bus_0(PCI_BUS: 0000) not a pci device: it's type 3
PCI: pci_scan_bus pci_get_dev returns dev None (no dev in tree yet)
new_device: devcnt 4
find_device_operations: check all_device_operations[i] 0x0000b0ac
find_device_operations: cons 0x0000b0ac, cons id PCI: 1013:00b8
find_device_operations: check all_device_operations[i] 0x0000b104
find_device_operations: cons 0x0000b104, cons id PCI_DOMAIN: 8086:7190
find_device_operations: check all_device_operations[i] 0x0000b1b4
find_device_operations: cons 0x0000b1b4, cons id PCI: 8086:7010
constructor: constructor is 0x00000000
No ops found and no constructor called for PCI: 8086:7113.
find_device_operations: check all_device_operations[i] 0x0000b0ac
find_device_operations: cons 0x0000b0ac, cons id PCI: 1013:00b8
find_device_operations: check all_device_operations[i] 0x0000b104
find_device_operations: cons 0x0000b104, cons id PCI_DOMAIN: 8086:7190
find_device_operations: check all_device_operations[i] 0x0000b1b4
find_device_operations: cons 0x0000b1b4, cons id PCI: 8086:7010
set_pci_ops: dev dynamic PCI: 00:01.3 set ops to type 0
PCI: 00:01.3 [PCI: 8086:7113] enabled
PCI: pci_scan_bus pci_probe_dev returns dev dynamic PCI: 00:01.3
PCI: devfn 0xc
pci_get_dev: list is NOT NULL, *list is NOT NULL
pci_get_dev: check dev domain_0_bus_0 
pci_get_dev: child domain_0_bus_0(PCI_BUS: 0000) not a pci device: it's type 3
PCI: pci_scan_bus pci_get_dev returns dev None (no dev in tree yet)
PCI: devfn 0xc, bad id 0xffffffff
PCI: pci_scan_bus pci_probe_dev returns dev None (no response)
PCI: devfn 0xd
pci_get_dev: list is NOT NULL, *list is NOT NULL
pci_get_dev: check dev domain_0_bus_0 
pci_get_dev: child domain_0_bus_0(PCI_BUS: 0000) not a pci device: it's type 3
PCI: pci_scan_bus pci_get_dev returns dev None (no dev in tree yet)
PCI: devfn 0xd, bad id 0xffffffff
PCI: pci_scan_bus pci_probe_dev returns dev None (no response)
PCI: devfn 0xe
pci_get_dev: list is NOT NULL, *list is NOT NULL
pci_get_dev: check dev domain_0_bus_0 
pci_get_dev: child domain_0_bus_0(PCI_BUS: 0000) not a pci device: it's type 3
PCI: pci_scan_bus pci_get_dev returns dev None (no dev in tree yet)
PCI: devfn 0xe, bad id 0xffffffff
PCI: pci_scan_bus pci_probe_dev returns dev None (no response)
PCI: devfn 0xf
pci_get_dev: list is NOT NULL, *list is NOT NULL
pci_get_dev: check dev domain_0_bus_0 
pci_get_dev: child domain_0_bus_0(PCI_BUS: 0000) not a pci device: it's type 3
PCI: pci_scan_bus pci_get_dev returns dev None (no dev in tree yet)
PCI: devfn 0xf, bad id 0xffffffff
PCI: pci_scan_bus pci_probe_dev returns dev None (no response)
PCI: devfn 0x10
pci_get_dev: list is NOT NULL, *list is NOT NULL
pci_get_dev: check dev domain_0_bus_0 
pci_get_dev: child domain_0_bus_0(PCI_BUS: 0000) not a pci device: it's type 3
PCI: pci_scan_bus pci_get_dev returns dev None (no dev in tree yet)
new_device: devcnt 5
find_device_operations: check all_device_operations[i] 0x0000b0ac
find_device_operations: cons 0x0000b0ac, cons id PCI: 1013:00b8
find_device_operations: match
constructor: constructor is 0x0000b0ac
default device constructor called
set_pci_ops: dev dynamic PCI: 00:02.0 already has ops of type 20504349
PCI: 00:02.0 [PCI: 1013:00b8] enabled
PCI: pci_scan_bus pci_probe_dev returns dev dynamic PCI: 00:02.0
Not a multi function device, or the device is not present. Skip to next device.
PCI: devfn 0x18
pci_get_dev: list is NOT NULL, *list is NOT NULL
pci_get_dev: check dev domain_0_bus_0 
pci_get_dev: child domain_0_bus_0(PCI_BUS: 0000) not a pci device: it's type 3
PCI: pci_scan_bus pci_get_dev returns dev None (no dev in tree yet)
new_device: devcnt 6
find_device_operations: check all_device_operations[i] 0x0000b0ac
find_device_operations: cons 0x0000b0ac, cons id PCI: 1013:00b8
find_device_operations: check all_device_operations[i] 0x0000b104
find_device_operations: cons 0x0000b104, cons id PCI_DOMAIN: 8086:7190
find_device_operations: check all_device_operations[i] 0x0000b1b4
find_device_operations: cons 0x0000b1b4, cons id PCI: 8086:7010
constructor: constructor is 0x00000000
No ops found and no constructor called for PCI: 10ec:8029.
find_device_operations: check all_device_operations[i] 0x0000b0ac
find_device_operations: cons 0x0000b0ac, cons id PCI: 1013:00b8
find_device_operations: check all_device_operations[i] 0x0000b104
find_device_operations: cons 0x0000b104, cons id PCI_DOMAIN: 8086:7190
find_device_operations: check all_device_operations[i] 0x0000b1b4
find_device_operations: cons 0x0000b1b4, cons id PCI: 8086:7010
set_pci_ops: dev dynamic PCI: 00:03.0 set ops to type 0
PCI: 00:03.0 [PCI: 10ec:8029] enabled
PCI: pci_scan_bus pci_probe_dev returns dev dynamic PCI: 00:03.0
Not a multi function device, or the device is not present. Skip to next device.
PCI: devfn 0x20
pci_get_dev: list is NOT NULL, *list is NOT NULL
pci_get_dev: check dev domain_0_bus_0 
pci_get_dev: child domain_0_bus_0(PCI_BUS: 0000) not a pci device: it's type 3
PCI: pci_scan_bus pci_get_dev returns dev None (no dev in tree yet)
PCI: devfn 0x20, bad id 0xffffffff
PCI: pci_scan_bus pci_probe_dev returns dev None (no response)
Not a multi function device, or the device is not present. Skip to next device.
PCI: devfn 0x28
pci_get_dev: list is NOT NULL, *list is NOT NULL
pci_get_dev: check dev domain_0_bus_0 
pci_get_dev: child domain_0_bus_0(PCI_BUS: 0000) not a pci device: it's type 3
PCI: pci_scan_bus pci_get_dev returns dev None (no dev in tree yet)
PCI: devfn 0x28, bad id 0xffffffff
PCI: pci_scan_bus pci_probe_dev returns dev None (no response)
Not a multi function device, or the device is not present. Skip to next device.
PCI: devfn 0x30
pci_get_dev: list is NOT NULL, *list is NOT NULL
pci_get_dev: check dev domain_0_bus_0 
pci_get_dev: child domain_0_bus_0(PCI_BUS: 0000) not a pci device: it's type 3
PCI: pci_scan_bus pci_get_dev returns dev None (no dev in tree yet)
PCI: devfn 0x30, bad id 0xffffffff
PCI: pci_scan_bus pci_probe_dev returns dev None (no response)
Not a multi function device, or the device is not present. Skip to next device.
PCI: devfn 0x38
pci_get_dev: list is NOT NULL, *list is NOT NULL
pci_get_dev: check dev domain_0_bus_0 
pci_get_dev: child domain_0_bus_0(PCI_BUS: 0000) not a pci device: it's type 3
PCI: pci_scan_bus pci_get_dev returns dev None (no dev in tree yet)
PCI: devfn 0x38, bad id 0xffffffff
PCI: pci_scan_bus pci_probe_dev returns dev None (no response)
Not a multi function device, or the device is not present. Skip to next device.
PCI: devfn 0x40
pci_get_dev: list is NOT NULL, *list is NOT NULL
pci_get_dev: check dev domain_0_bus_0 
pci_get_dev: child domain_0_bus_0(PCI_BUS: 0000) not a pci device: it's type 3
PCI: pci_scan_bus pci_get_dev returns dev None (no dev in tree yet)
PCI: devfn 0x40, bad id 0xffffffff
PCI: pci_scan_bus pci_probe_dev returns dev None (no response)
Not a multi function device, or the device is not present. Skip to next device.
PCI: devfn 0x48
pci_get_dev: list is NOT NULL, *list is NOT NULL
pci_get_dev: check dev domain_0_bus_0 
pci_get_dev: child domain_0_bus_0(PCI_BUS: 0000) not a pci device: it's type 3
PCI: pci_scan_bus pci_get_dev returns dev None (no dev in tree yet)
PCI: devfn 0x48, bad id 0xffffffff
PCI: pci_scan_bus pci_probe_dev returns dev None (no response)
Not a multi function device, or the device is not present. Skip to next device.
PCI: devfn 0x50
pci_get_dev: list is NOT NULL, *list is NOT NULL
pci_get_dev: check dev domain_0_bus_0 
pci_get_dev: child domain_0_bus_0(PCI_BUS: 0000) not a pci device: it's type 3
PCI: pci_scan_bus pci_get_dev returns dev None (no dev in tree yet)
PCI: devfn 0x50, bad id 0xffffffff
PCI: pci_scan_bus pci_probe_dev returns dev None (no response)
Not a multi function device, or the device is not present. Skip to next device.
PCI: devfn 0x58
pci_get_dev: list is NOT NULL, *list is NOT NULL
pci_get_dev: check dev domain_0_bus_0 
pci_get_dev: child domain_0_bus_0(PCI_BUS: 0000) not a pci device: it's type 3
PCI: pci_scan_bus pci_get_dev returns dev None (no dev in tree yet)
PCI: devfn 0x58, bad id 0xffffffff
PCI: pci_scan_bus pci_probe_dev returns dev None (no response)
Not a multi function device, or the device is not present. Skip to next device.
PCI: devfn 0x60
pci_get_dev: list is NOT NULL, *list is NOT NULL
pci_get_dev: check dev domain_0_bus_0 
pci_get_dev: child domain_0_bus_0(PCI_BUS: 0000) not a pci device: it's type 3
PCI: pci_scan_bus pci_get_dev returns dev None (no dev in tree yet)
PCI: devfn 0x60, bad id 0xffffffff
PCI: pci_scan_bus pci_probe_dev returns dev None (no response)
Not a multi function device, or the device is not present. Skip to next device.
PCI: devfn 0x68
pci_get_dev: list is NOT NULL, *list is NOT NULL
pci_get_dev: check dev domain_0_bus_0 
pci_get_dev: child domain_0_bus_0(PCI_BUS: 0000) not a pci device: it's type 3
PCI: pci_scan_bus pci_get_dev returns dev None (no dev in tree yet)
PCI: devfn 0x68, bad id 0xffffffff
PCI: pci_scan_bus pci_probe_dev returns dev None (no response)
Not a multi function device, or the device is not present. Skip to next device.
PCI: devfn 0x70
pci_get_dev: list is NOT NULL, *list is NOT NULL
pci_get_dev: check dev domain_0_bus_0 
pci_get_dev: child domain_0_bus_0(PCI_BUS: 0000) not a pci device: it's type 3
PCI: pci_scan_bus pci_get_dev returns dev None (no dev in tree yet)
PCI: devfn 0x70, bad id 0xffffffff
PCI: pci_scan_bus pci_probe_dev returns dev None (no response)
Not a multi function device, or the device is not present. Skip to next device.
PCI: devfn 0x78
pci_get_dev: list is NOT NULL, *list is NOT NULL
pci_get_dev: check dev domain_0_bus_0 
pci_get_dev: child domain_0_bus_0(PCI_BUS: 0000) not a pci device: it's type 3
PCI: pci_scan_bus pci_get_dev returns dev None (no dev in tree yet)
PCI: devfn 0x78, bad id 0xffffffff
PCI: pci_scan_bus pci_probe_dev returns dev None (no response)
Not a multi function device, or the device is not present. Skip to next device.
PCI: devfn 0x80
pci_get_dev: list is NOT NULL, *list is NOT NULL
pci_get_dev: check dev domain_0_bus_0 
pci_get_dev: child domain_0_bus_0(PCI_BUS: 0000) not a pci device: it's type 3
PCI: pci_scan_bus pci_get_dev returns dev None (no dev in tree yet)
PCI: devfn 0x80, bad id 0xffffffff
PCI: pci_scan_bus pci_probe_dev returns dev None (no response)
Not a multi function device, or the device is not present. Skip to next device.
PCI: devfn 0x88
pci_get_dev: list is NOT NULL, *list is NOT NULL
pci_get_dev: check dev domain_0_bus_0 
pci_get_dev: child domain_0_bus_0(PCI_BUS: 0000) not a pci device: it's type 3
PCI: pci_scan_bus pci_get_dev returns dev None (no dev in tree yet)
PCI: devfn 0x88, bad id 0xffffffff
PCI: pci_scan_bus pci_probe_dev returns dev None (no response)
Not a multi function device, or the device is not present. Skip to next device.
PCI: devfn 0x90
pci_get_dev: list is NOT NULL, *list is NOT NULL
pci_get_dev: check dev domain_0_bus_0 
pci_get_dev: child domain_0_bus_0(PCI_BUS: 0000) not a pci device: it's type 3
PCI: pci_scan_bus pci_get_dev returns dev None (no dev in tree yet)
PCI: devfn 0x90, bad id 0xffffffff
PCI: pci_scan_bus pci_probe_dev returns dev None (no response)
Not a multi function device, or the device is not present. Skip to next device.
PCI: devfn 0x98
pci_get_dev: list is NOT NULL, *list is NOT NULL
pci_get_dev: check dev domain_0_bus_0 
pci_get_dev: child domain_0_bus_0(PCI_BUS: 0000) not a pci device: it's type 3
PCI: pci_scan_bus pci_get_dev returns dev None (no dev in tree yet)
PCI: devfn 0x98, bad id 0xffffffff
PCI: pci_scan_bus pci_probe_dev returns dev None (no response)
Not a multi function device, or the device is not present. Skip to next device.
PCI: devfn 0xa0
pci_get_dev: list is NOT NULL, *list is NOT NULL
pci_get_dev: check dev domain_0_bus_0 
pci_get_dev: child domain_0_bus_0(PCI_BUS: 0000) not a pci device: it's type 3
PCI: pci_scan_bus pci_get_dev returns dev None (no dev in tree yet)
PCI: devfn 0xa0, bad id 0xffffffff
PCI: pci_scan_bus pci_probe_dev returns dev None (no response)
Not a multi function device, or the device is not present. Skip to next device.
PCI: devfn 0xa8
pci_get_dev: list is NOT NULL, *list is NOT NULL
pci_get_dev: check dev domain_0_bus_0 
pci_get_dev: child domain_0_bus_0(PCI_BUS: 0000) not a pci device: it's type 3
PCI: pci_scan_bus pci_get_dev returns dev None (no dev in tree yet)
PCI: devfn 0xa8, bad id 0xffffffff
PCI: pci_scan_bus pci_probe_dev returns dev None (no response)
Not a multi function device, or the device is not present. Skip to next device.
PCI: devfn 0xb0
pci_get_dev: list is NOT NULL, *list is NOT NULL
pci_get_dev: check dev domain_0_bus_0 
pci_get_dev: child domain_0_bus_0(PCI_BUS: 0000) not a pci device: it's type 3
PCI: pci_scan_bus pci_get_dev returns dev None (no dev in tree yet)
PCI: devfn 0xb0, bad id 0xffffffff
PCI: pci_scan_bus pci_probe_dev returns dev None (no response)
Not a multi function device, or the device is not present. Skip to next device.
PCI: devfn 0xb8
pci_get_dev: list is NOT NULL, *list is NOT NULL
pci_get_dev: check dev domain_0_bus_0 
pci_get_dev: child domain_0_bus_0(PCI_BUS: 0000) not a pci device: it's type 3
PCI: pci_scan_bus pci_get_dev returns dev None (no dev in tree yet)
PCI: devfn 0xb8, bad id 0xffffffff
PCI: pci_scan_bus pci_probe_dev returns dev None (no response)
Not a multi function device, or the device is not present. Skip to next device.
PCI: devfn 0xc0
pci_get_dev: list is NOT NULL, *list is NOT NULL
pci_get_dev: check dev domain_0_bus_0 
pci_get_dev: child domain_0_bus_0(PCI_BUS: 0000) not a pci device: it's type 3
PCI: pci_scan_bus pci_get_dev returns dev None (no dev in tree yet)
PCI: devfn 0xc0, bad id 0xffffffff
PCI: pci_scan_bus pci_probe_dev returns dev None (no response)
Not a multi function device, or the device is not present. Skip to next device.
PCI: devfn 0xc8
pci_get_dev: list is NOT NULL, *list is NOT NULL
pci_get_dev: check dev domain_0_bus_0 
pci_get_dev: child domain_0_bus_0(PCI_BUS: 0000) not a pci device: it's type 3
PCI: pci_scan_bus pci_get_dev returns dev None (no dev in tree yet)
PCI: devfn 0xc8, bad id 0xffffffff
PCI: pci_scan_bus pci_probe_dev returns dev None (no response)
Not a multi function device, or the device is not present. Skip to next device.
PCI: devfn 0xd0
pci_get_dev: list is NOT NULL, *list is NOT NULL
pci_get_dev: check dev domain_0_bus_0 
pci_get_dev: child domain_0_bus_0(PCI_BUS: 0000) not a pci device: it's type 3
PCI: pci_scan_bus pci_get_dev returns dev None (no dev in tree yet)
PCI: devfn 0xd0, bad id 0xffffffff
PCI: pci_scan_bus pci_probe_dev returns dev None (no response)
Not a multi function device, or the device is not present. Skip to next device.
PCI: devfn 0xd8
pci_get_dev: list is NOT NULL, *list is NOT NULL
pci_get_dev: check dev domain_0_bus_0 
pci_get_dev: child domain_0_bus_0(PCI_BUS: 0000) not a pci device: it's type 3
PCI: pci_scan_bus pci_get_dev returns dev None (no dev in tree yet)
PCI: devfn 0xd8, bad id 0xffffffff
PCI: pci_scan_bus pci_probe_dev returns dev None (no response)
Not a multi function device, or the device is not present. Skip to next device.
PCI: devfn 0xe0
pci_get_dev: list is NOT NULL, *list is NOT NULL
pci_get_dev: check dev domain_0_bus_0 
pci_get_dev: child domain_0_bus_0(PCI_BUS: 0000) not a pci device: it's type 3
PCI: pci_scan_bus pci_get_dev returns dev None (no dev in tree yet)
PCI: devfn 0xe0, bad id 0xffffffff
PCI: pci_scan_bus pci_probe_dev returns dev None (no response)
Not a multi function device, or the device is not present. Skip to next device.
PCI: devfn 0xe8
pci_get_dev: list is NOT NULL, *list is NOT NULL
pci_get_dev: check dev domain_0_bus_0 
pci_get_dev: child domain_0_bus_0(PCI_BUS: 0000) not a pci device: it's type 3
PCI: pci_scan_bus pci_get_dev returns dev None (no dev in tree yet)
PCI: devfn 0xe8, bad id 0xffffffff
PCI: pci_scan_bus pci_probe_dev returns dev None (no response)
Not a multi function device, or the device is not present. Skip to next device.
PCI: devfn 0xf0
pci_get_dev: list is NOT NULL, *list is NOT NULL
pci_get_dev: check dev domain_0_bus_0 
pci_get_dev: child domain_0_bus_0(PCI_BUS: 0000) not a pci device: it's type 3
PCI: pci_scan_bus pci_get_dev returns dev None (no dev in tree yet)
PCI: devfn 0xf0, bad id 0xffffffff
PCI: pci_scan_bus pci_probe_dev returns dev None (no response)
Not a multi function device, or the device is not present. Skip to next device.
PCI: devfn 0xf8
pci_get_dev: list is NOT NULL, *list is NOT NULL
pci_get_dev: check dev domain_0_bus_0 
pci_get_dev: child domain_0_bus_0(PCI_BUS: 0000) not a pci device: it's type 3
PCI: pci_scan_bus pci_get_dev returns dev None (no dev in tree yet)
PCI: devfn 0xf8, bad id 0xffffffff
PCI: pci_scan_bus pci_probe_dev returns dev None (no response)
Not a multi function device, or the device is not present. Skip to next device.
PCI: Done for loop
PCI: Left over static devices:
domain_0_bus_0
PCI: End of leftover list.
dev_phase3_scan: dynamic PCI: 00:00.0: busdevice 0x0000c778 enabled 1 ops 0x00008f6c
dev_phase3_scan: can not scan from here, returning 0
dev_phase3_scan: dynamic PCI: 00:01.0: busdevice 0x0000ca70 enabled 1 ops 0x00008f6c
dev_phase3_scan: can not scan from here, returning 0
dev_phase3_scan: dynamic PCI: 00:01.1: busdevice 0x0000cd68 enabled 1 ops 0x0000b1b4
dev_phase3_scan: can not scan from here, returning 0
dev_phase3_scan: dynamic PCI: 00:01.3: busdevice 0x0000d060 enabled 1 ops 0x00008f6c
dev_phase3_scan: can not scan from here, returning 0
dev_phase3_scan: dynamic PCI: 00:02.0: busdevice 0x0000d358 enabled 1 ops 0x0000b0ac
dev_phase3_scan: can not scan from here, returning 0
dev_phase3_scan: dynamic PCI: 00:03.0: busdevice 0x0000d650 enabled 1 ops 0x00008f6c
dev_phase3_scan: can not scan from here, returning 0
PCI: pci_scan_bus returning with curr_bus=000
dev_phase3_scan: returning 0
scan_static_bus for root(Root Device) done
dev_phase3_scan: returning 0
Phase 3: Done.
Show all devs...
root(Root Device): enabled 1 have_resources 0
cpus(CPU: 00): enabled 1 have_resources 0
domain_0_bus_0_pci_0_0(PCI: 00:00.0): enabled 1 have_resources 0
domain_0_bus_0_pci_1_1(PCI: 00:01.1): enabled 1 have_resources 0
domain_0_bus_0(PCI_BUS: 0000): enabled 1 have_resources 0
domain_0(PCI_DOMAIN: 0000): enabled 1 have_resources 0
dynamic PCI: 00:00.0(PCI: 00:00.0): enabled 1 have_resources 0
dynamic PCI: 00:01.0(PCI: 00:01.0): enabled 1 have_resources 0
dynamic PCI: 00:01.1(PCI: 00:01.1): enabled 1 have_resources 0
dynamic PCI: 00:01.3(PCI: 00:01.3): enabled 1 have_resources 0
dynamic PCI: 00:02.0(PCI: 00:02.0): enabled 1 have_resources 0
dynamic PCI: 00:03.0(PCI: 00:03.0): enabled 1 have_resources 0
Phase 4: Allocating resources...
Phase 4: Reading resources...
read_resources: root(Root Device) read_resources bus 0 link: 0
read_resources: root(Root Device) dtsname cpus have_resources 0 enabled 1
read_resources: cpus(CPU: 00) missing phase4_read_resources
read_resources: root(Root Device) dtsname domain_0 have_resources 0 enabled 1
read_resources: domain_0(PCI_DOMAIN: 0000) read_resources bus 0 link: 0
read_resources: domain_0(PCI_DOMAIN: 0000) dtsname dynamic PCI: 00:00.0 have_resources 0 enabled 1
read_resources: domain_0(PCI_DOMAIN: 0000) dtsname dynamic PCI: 00:01.0 have_resources 0 enabled 1
read_resources: domain_0(PCI_DOMAIN: 0000) dtsname dynamic PCI: 00:01.1 have_resources 0 enabled 1
read_resources: domain_0(PCI_DOMAIN: 0000) dtsname dynamic PCI: 00:01.3 have_resources 0 enabled 1
read_resources: domain_0(PCI_DOMAIN: 0000) dtsname dynamic PCI: 00:02.0 have_resources 0 enabled 1
read_resources: domain_0(PCI_DOMAIN: 0000) dtsname dynamic PCI: 00:03.0 have_resources 0 enabled 1
read_resources: domain_0(PCI_DOMAIN: 0000) read_resources bus 0 link: 0 done
read_resources: root(Root Device) read_resources bus 0 link: 0 done
root_dev_read_resources: Done allocating
Show all devs...
root(Root Device): enabled 1 have_resources 0
cpus(CPU: 00): enabled 1 have_resources 0
domain_0_bus_0_pci_0_0(PCI: 00:00.0): enabled 1 have_resources 0
domain_0_bus_0_pci_1_1(PCI: 00:01.1): enabled 1 have_resources 0
domain_0_bus_0(PCI_BUS: 0000): enabled 1 have_resources 0
domain_0(PCI_DOMAIN: 0000): enabled 1 have_resources 1
PCI_DOMAIN: 0000 10000000 <- [0x0000000000 - 0xffffffffffffffff] size 0x00000000 gran 0x00 io
PCI_DOMAIN: 0000 10000100 <- [0x0000000000 - 0xffffffffffffffff] size 0x00000000 gran 0x00 mem
dynamic PCI: 00:00.0(PCI: 00:00.0): enabled 1 have_resources 1
dynamic PCI: 00:01.0(PCI: 00:01.0): enabled 1 have_resources 1
dynamic PCI: 00:01.1(PCI: 00:01.1): enabled 1 have_resources 1
PCI: 00:01.1 20 <- [0x0000000000 - 0x000000000f] size 0x00000010 gran 0x04 io
dynamic PCI: 00:01.3(PCI: 00:01.3): enabled 1 have_resources 1
dynamic PCI: 00:02.0(PCI: 00:02.0): enabled 1 have_resources 1
PCI: 00:02.0 10 <- [0x0000000000 - 0x0001ffffff] size 0x02000000 gran 0x19 prefmem
PCI: 00:02.0 14 <- [0x0000000000 - 0x0000000fff] size 0x00001000 gran 0x0c mem
dynamic PCI: 00:03.0(PCI: 00:03.0): enabled 1 have_resources 1
PCI: 00:03.0 10 <- [0x0000000000 - 0x00000000ff] size 0x00000100 gran 0x08 io
Phase 4: Done reading resources.
Root Device compute_allocate_io: base: 00000400 size: 00000000 align: 0 gran: 0
read_resources: root(Root Device) read_resources bus 0 link: 0
read_resources: root(Root Device) dtsname cpus have_resources 0 enabled 1
read_resources: cpus(CPU: 00) missing phase4_read_resources
read_resources: root(Root Device) dtsname domain_0 have_resources 1 enabled 1
read_resources: root(Root Device) read_resources bus 0 link: 0 done
PCI: 00:03.0 10 *  [0x00000400 - 0x000004ff] io
PCI: 00:01.1 20 *  [0x00000800 - 0x0000080f] io
Root Device compute_allocate_io: base: 00000810 size: 00000410 align: 8 gran: 0 done
Root Device compute_allocate_mem: base: 00000000 size: 00000000 align: 0 gran: 0
read_resources: root(Root Device) read_resources bus 0 link: 0
read_resources: root(Root Device) dtsname cpus have_resources 0 enabled 1
read_resources: cpus(CPU: 00) missing phase4_read_resources
read_resources: root(Root Device) dtsname domain_0 have_resources 1 enabled 1
read_resources: root(Root Device) read_resources bus 0 link: 0 done
PCI: 00:02.0 10 *  [0x00000000 - 0x01ffffff] prefmem
PCI: 00:02.0 14 *  [0x02000000 - 0x02000fff] mem
Root Device compute_allocate_mem: base: 02001000 size: 02001000 align: 25 gran: 0 done
Allocating VGA resource PCI: 00:02.0
Setting PCI_BRIDGE_CTL_VGA for bridge PCI_DOMAIN: 0000
Setting PCI_BRIDGE_CTL_VGA for bridge Root Device
Root Device compute_allocate_io: base: 00001000 size: 00000410 align: 8 gran: 0
read_resources: root(Root Device) read_resources bus 0 link: 0
read_resources: root(Root Device) dtsname cpus have_resources 0 enabled 1
read_resources: cpus(CPU: 00) missing phase4_read_resources
read_resources: root(Root Device) dtsname domain_0 have_resources 1 enabled 1
read_resources: root(Root Device) read_resources bus 0 link: 0 done
PCI: 00:03.0 10 *  [0x00001000 - 0x000010ff] io
PCI: 00:01.1 20 *  [0x00001400 - 0x0000140f] io
Root Device compute_allocate_io: base: 00001410 size: 00000410 align: 8 gran: 0 done
Root Device compute_allocate_mem: base: fc000000 size: 02001000 align: 25 gran: 0
read_resources: root(Root Device) read_resources bus 0 link: 0
read_resources: root(Root Device) dtsname cpus have_resources 0 enabled 1
read_resources: cpus(CPU: 00) missing phase4_read_resources
read_resources: root(Root Device) dtsname domain_0 have_resources 1 enabled 1
read_resources: root(Root Device) read_resources bus 0 link: 0 done
PCI: 00:02.0 10 *  [0xfc000000 - 0xfdffffff] prefmem
PCI: 00:02.0 14 *  [0xfe000000 - 0xfe000fff] mem
Root Device compute_allocate_mem: base: fe001000 size: 02001000 align: 25 gran: 0 done
Phase 4: Setting resources...
root(Root Device) assign_resources, bus 0 link: 0
Ignoring chipset specified RAM size. Using dts settings of 114688 kB instead.
Adding RAM resource (655360 bytes)
Adding RAM resource (116654080 bytes)
domain_0(PCI_DOMAIN: 0000) assign_resources, bus 0 link: 0
PCI: 00:01.1 20 <- [0x0000001400 - 0x000000140f] size 0x00000010 gran 0x04 io
PCI: 00:02.0 10 <- [0x00fc000000 - 0x00fdffffff] size 0x02000000 gran 0x19 prefmem
PCI: 00:02.0 14 <- [0x00fe000000 - 0x00fe000fff] size 0x00001000 gran 0x0c mem
PCI: 00:03.0 10 <- [0x0000001000 - 0x00000010ff] size 0x00000100 gran 0x08 io
domain_0(PCI_DOMAIN: 0000) assign_resources done, bus 0 link: 0
root(Root Device) assign_resources done, bus 0 link: 0
Phase 4: Done setting resources.
Phase 4: Done allocating resources.
Show all devs...
root(Root Device): enabled 1 have_resources 0
cpus(CPU: 00): enabled 1 have_resources 0
domain_0_bus_0_pci_0_0(PCI: 00:00.0): enabled 1 have_resources 0
domain_0_bus_0_pci_1_1(PCI: 00:01.1): enabled 1 have_resources 0
domain_0_bus_0(PCI_BUS: 0000): enabled 1 have_resources 0
domain_0(PCI_DOMAIN: 0000): enabled 1 have_resources 1
dynamic PCI: 00:00.0(PCI: 00:00.0): enabled 1 have_resources 1
dynamic PCI: 00:01.0(PCI: 00:01.0): enabled 1 have_resources 1
dynamic PCI: 00:01.1(PCI: 00:01.1): enabled 1 have_resources 1
dynamic PCI: 00:01.3(PCI: 00:01.3): enabled 1 have_resources 1
dynamic PCI: 00:02.0(PCI: 00:02.0): enabled 1 have_resources 1
dynamic PCI: 00:03.0(PCI: 00:03.0): enabled 1 have_resources 1
Phase 5: Enabling resources...
dev_phase5: cpus(CPU: 00) missing ops
PCI: 00:00.0: Device not on_mainboard
PCI: 00:00.0: Not setting subsystem VID/DID
pci_dev_enable_resources: dynamic PCI: 00:00.0 (PCI: 00:00.0) cmd <- 140
PCI: 00:01.0: Device not on_mainboard
PCI: 00:01.0: Not setting subsystem VID/DID
pci_dev_enable_resources: dynamic PCI: 00:01.0 (PCI: 00:01.0) cmd <- 147
PCI: 00:01.1: Device not on_mainboard
PCI: 00:01.1: Not setting subsystem VID/DID
pci_dev_enable_resources: dynamic PCI: 00:01.1 (PCI: 00:01.1) cmd <- 141
PCI: 00:01.3: Device not on_mainboard
PCI: 00:01.3: Not setting subsystem VID/DID
pci_dev_enable_resources: dynamic PCI: 00:01.3 (PCI: 00:01.3) cmd <- 140
PCI: 00:02.0: Device not on_mainboard
PCI: 00:02.0: Not setting subsystem VID/DID
pci_dev_enable_resources: dynamic PCI: 00:02.0 (PCI: 00:02.0) cmd <- 143
PCI: 00:03.0: Device not on_mainboard
PCI: 00:03.0: Not setting subsystem VID/DID
pci_dev_enable_resources: dynamic PCI: 00:03.0 (PCI: 00:03.0) cmd <- 141
Phase 5: Done.
Show all devs...
root(Root Device): enabled 1 have_resources 0
cpus(CPU: 00): enabled 1 have_resources 0
domain_0_bus_0_pci_0_0(PCI: 00:00.0): enabled 1 have_resources 0
domain_0_bus_0_pci_1_1(PCI: 00:01.1): enabled 1 have_resources 0
domain_0_bus_0(PCI_BUS: 0000): enabled 1 have_resources 0
domain_0(PCI_DOMAIN: 0000): enabled 1 have_resources 1
dynamic PCI: 00:00.0(PCI: 00:00.0): enabled 1 have_resources 1
dynamic PCI: 00:01.0(PCI: 00:01.0): enabled 1 have_resources 1
dynamic PCI: 00:01.1(PCI: 00:01.1): enabled 1 have_resources 1
dynamic PCI: 00:01.3(PCI: 00:01.3): enabled 1 have_resources 1
dynamic PCI: 00:02.0(PCI: 00:02.0): enabled 1 have_resources 1
dynamic PCI: 00:03.0(PCI: 00:03.0): enabled 1 have_resources 1
Phase 6: Initializing devices...
Phase 6: Root Device init.
Phase 6: PCI: 00:01.1 init.
Enabling IDE channel 1
Enabling IDE channel 2
Enabling Legacy IDE
Phase 6: PCI: 00:00.0 init.
PCI: pci_dev_init dynamic PCI: 00:00.0
Probing for option ROM
Phase 6: PCI: 00:01.0 init.
PCI: pci_dev_init dynamic PCI: 00:01.0
Probing for option ROM
Phase 6: PCI: 00:01.1 init.
Enabling IDE channel 1
Enabling IDE channel 2
Enabling Legacy IDE
Phase 6: PCI: 00:01.3 init.
PCI: pci_dev_init dynamic PCI: 00:01.3
Probing for option ROM
Phase 6: PCI: 00:02.0 init.
Init VGA device
PCI: pci_dev_init dynamic PCI: 00:02.0
Probing for option ROM
ROM address for PCI: 00:02.0 = c0000
PCI Expansion ROM, signature 0xaa55, INIT size 0x8a00, data ptr 0x736f
PCI ROM Image, @0x000c7373, Vendor 0846, Device ec89,
Device or Vendor ID mismatch Vendor 0846, Device ec89
Phase 6: PCI: 00:03.0 init.
PCI: pci_dev_init dynamic PCI: 00:03.0
Probing for option ROM
Phase 6: Devices initialized.
Show all devs...
root(Root Device): enabled 1 have_resources 0
cpus(CPU: 00): enabled 1 have_resources 0
domain_0_bus_0_pci_0_0(PCI: 00:00.0): enabled 1 have_resources 0
domain_0_bus_0_pci_1_1(PCI: 00:01.1): enabled 1 have_resources 0
domain_0_bus_0(PCI_BUS: 0000): enabled 1 have_resources 0
domain_0(PCI_DOMAIN: 0000): enabled 1 have_resources 1
dynamic PCI: 00:00.0(PCI: 00:00.0): enabled 1 have_resources 1
dynamic PCI: 00:01.0(PCI: 00:01.0): enabled 1 have_resources 1
dynamic PCI: 00:01.1(PCI: 00:01.1): enabled 1 have_resources 1
dynamic PCI: 00:01.3(PCI: 00:01.3): enabled 1 have_resources 1
dynamic PCI: 00:02.0(PCI: 00:02.0): enabled 1 have_resources 1
dynamic PCI: 00:03.0(PCI: 00:03.0): enabled 1 have_resources 1
search_global_resources: mask 4200 type 4200 
search_global_resources: dev root, have_resources 0 #resources 2
search_global_resources: dev cpus, have_resources 0 #resources 0
search_global_resources: dev domain_0_bus_0_pci_0_0, have_resources 0 #resources 0
search_global_resources: dev domain_0_bus_0_pci_1_1, have_resources 0 #resources 0
search_global_resources: dev domain_0_bus_0, have_resources 0 #resources 0
search_global_resources: dev domain_0, have_resources 1 #resources 4
search_global_resources: dev domain_0, resource 0, flags 40040100 base 0x0 size 0x0
search_global_resources: dev domain_0, resource 1, flags 40040200 base 0x0 size 0x0
search_global_resources: dev domain_0, resource 2, flags e0004200 base 0x0 size 0xa0000
search_global_resources: dev domain_0, resource 3, flags e0004200 base 0xc0000 size 0x6f40000
search_global_resources: dev dynamic PCI: 00:00.0, have_resources 1 #resources 0
search_global_resources: dev dynamic PCI: 00:01.0, have_resources 1 #resources 0
search_global_resources: dev dynamic PCI: 00:01.1, have_resources 1 #resources 1
search_global_resources: dev dynamic PCI: 00:01.1, resource 0, flags 60000100 base 0x1400 size 0x10
search_global_resources: dev dynamic PCI: 00:01.3, have_resources 1 #resources 0
search_global_resources: dev dynamic PCI: 00:02.0, have_resources 1 #resources 2
search_global_resources: dev dynamic PCI: 00:02.0, resource 0, flags 60001200 base 0xfc000000 size 0x2000000
search_global_resources: dev dynamic PCI: 00:02.0, resource 1, flags 60000200 base 0xfe000000 size 0x1000
search_global_resources: dev dynamic PCI: 00:03.0, have_resources 1 #resources 1
search_global_resources: dev dynamic PCI: 00:03.0, resource 0, flags 60000100 base 0x1000 size 0x100
Multiboot Information structure has been written.
LAR: Attempting to open 'normal/option_table'.
LAR: Start 0xfffc0000 len 0x40000
LAR: seen member normal/option_table@0xfffc0000, size 932
LAR: CHECK normal/option_table @ 0xfffc0000
start 0xfffc0050 len 932 reallen 932 compression 0 entry 0x00000000 loadaddress 0x00000000
search_global_resources: mask 4200 type 4200 
search_global_resources: dev root, have_resources 0 #resources 2
search_global_resources: dev cpus, have_resources 0 #resources 0
search_global_resources: dev domain_0_bus_0_pci_0_0, have_resources 0 #resources 0
search_global_resources: dev domain_0_bus_0_pci_1_1, have_resources 0 #resources 0
search_global_resources: dev domain_0_bus_0, have_resources 0 #resources 0
search_global_resources: dev domain_0, have_resources 1 #resources 4
search_global_resources: dev domain_0, resource 0, flags 40040100 base 0x0 size 0x0
search_global_resources: dev domain_0, resource 1, flags 40040200 base 0x0 size 0x0
search_global_resources: dev domain_0, resource 2, flags e0004200 base 0x0 size 0xa0000
lb_memory_range: start 0x0 size 0xa0000
search_global_resources: dev domain_0, resource 3, flags e0004200 base 0xc0000 size 0x6f40000
lb_memory_range: start 0xc0000 size 0x6f40000
search_global_resources: dev dynamic PCI: 00:00.0, have_resources 1 #resources 0
search_global_resources: dev dynamic PCI: 00:01.0, have_resources 1 #resources 0
search_global_resources: dev dynamic PCI: 00:01.1, have_resources 1 #resources 1
search_global_resources: dev dynamic PCI: 00:01.1, resource 0, flags 60000100 base 0x1400 size 0x10
search_global_resources: dev dynamic PCI: 00:01.3, have_resources 1 #resources 0
search_global_resources: dev dynamic PCI: 00:02.0, have_resources 1 #resources 2
search_global_resources: dev dynamic PCI: 00:02.0, resource 0, flags 60001200 base 0xfc000000 size 0x2000000
search_global_resources: dev dynamic PCI: 00:02.0, resource 1, flags 60000200 base 0xfe000000 size 0x1000
search_global_resources: dev dynamic PCI: 00:03.0, have_resources 1 #resources 1
search_global_resources: dev dynamic PCI: 00:03.0, resource 0, flags 60000100 base 0x1000 size 0x100
lb_cleanup_memory_ranges: # entries 2
  #0: base 0x00000000 size 0xa0000
  #1: base 0x000c0000 size 0x6f40000
lb_memory_range: start 0x0 size 0x500
lb_cleanup_memory_ranges: # entries 3
  #0: base 0x00000500 size 0x9fb00
  #1: base 0x000c0000 size 0x6f40000
  #2: base 0x00000000 size 0x500
lb_memory_range: start 0xf0000 size 0xd0
lb_cleanup_memory_ranges: # entries 5
  #0: base 0x00000000 size 0x500
  #1: base 0x00000500 size 0x9fb00
  #2: base 0x000c0000 size 0x30000
  #3: base 0x000f00d0 size 0x6f0ff30
  #4: base 0x000f0000 size 0xd0
Wrote coreboot table at: 0x00000500 - 0x00000ad0  checksum 140e
Show all devs...
root(Root Device): enabled 1 have_resources 0
cpus(CPU: 00): enabled 1 have_resources 0
domain_0_bus_0_pci_0_0(PCI: 00:00.0): enabled 1 have_resources 0
domain_0_bus_0_pci_1_1(PCI: 00:01.1): enabled 1 have_resources 0
domain_0_bus_0(PCI_BUS: 0000): enabled 1 have_resources 0
domain_0(PCI_DOMAIN: 0000): enabled 1 have_resources 1
dynamic PCI: 00:00.0(PCI: 00:00.0): enabled 1 have_resources 1
dynamic PCI: 00:01.0(PCI: 00:01.0): enabled 1 have_resources 1
dynamic PCI: 00:01.1(PCI: 00:01.1): enabled 1 have_resources 1
dynamic PCI: 00:01.3(PCI: 00:01.3): enabled 1 have_resources 1
dynamic PCI: 00:02.0(PCI: 00:02.0): enabled 1 have_resources 1
dynamic PCI: 00:03.0(PCI: 00:03.0): enabled 1 have_resources 1
Stage2 code done.
LAR: Attempting to open 'normal/payload/segment0'.
LAR: Start 0xfffc0000 len 0x40000
LAR: seen member normal/option_table@0xfffc0000, size 932
LAR: seen member normal/initram/segment0@0xfffc0400, size 420
LAR: seen member normal/stage2/segment0@0xfffc0600, size 1
LAR: seen member normal/stage2/segment1@0xfffc0660, size 16161
LAR: seen member normal/stage2/segment2@0xfffc45e0, size 311
LAR: seen member bootblock@0xffffafc0, size 20480
LAR: File not found!
LAR: load_file: No such file 'normal/payload/segment0'
LAR: load_file_segments: Failed for normal/payload
Before handoff to payload, lowest stack is 0x0008bf50
FATAL: No usable payload found.