Index: corebootv3-bistfail/arch/x86/stage1.c
===================================================================
--- corebootv3-bistfail/arch/x86/stage1.c	(Revision 1055)
+++ corebootv3-bistfail/arch/x86/stage1.c	(Arbeitskopie)
@@ -187,7 +187,7 @@
  * that we are restarting after some sort of reconfiguration. Note that we could use it on geode but 
  * do not at present. 
  */
-void __attribute__((stdcall)) stage1_phase1(u32 bist, u32 init_detected)
+void __attribute__((stdcall,regparm(0))) stage1_phase1(u32 bist, u32 init_detected)
 {
 	struct global_vars globvars;
 	int ret;
Index: corebootv3-bistfail/arch/x86/intel/core2/stage0.S
===================================================================
--- corebootv3-bistfail/arch/x86/intel/core2/stage0.S	(Revision 1055)
+++ corebootv3-bistfail/arch/x86/intel/core2/stage0.S	(Arbeitskopie)
@@ -156,17 +156,26 @@
 	movl	$(CACHE_AS_RAM_BASE + CACHE_AS_RAM_SIZE - 4), %eax
 	movl	%eax, %esp
 
-	/* Restore the BIST result */
+	/* Store zero for the pointer to the global variables. */
+	pushl   $0
+
+	/* Restore the BIST result. */
 	movl	%ebp, %eax
+
+	/* We need to set ebp? No need. */
 	movl	%esp, %ebp
+
+	/* Second parameter: init_detected */
+	/* Store zero for the unused init_detected parameter. */
+	pushl	$0
+
+	/* First parameter: bist */
 	pushl	%eax
 
-#if 0
-	/* this will be interpreted as failed bist */
 	port80_post(0x23)
-#endif
 
 	call	stage1_phase1
+	/* We will not go back. */
 
 	port80_post(0x2f)
 error:
