serengeti.diff and dtc-links.diff make serengeti find all of its devices correctly.<br><br>serengeti.diff <br>- takes out the multiple links for the Opteron (they weren't working correctly)<br>- adds the 8132 devices and makes them pci_a so they don't conflict with the 8111<br>
- corrects the disabled flags (I think we should have a build error somewhere when there are incorrect flags)<br>- moves the lpc device to the lpc bus<br>- adds back in the second Opteron<br><br>Signed-off-by: Myles Watson <<a href="mailto:mylesgw@gmail.com">mylesgw@gmail.com</a>><br>
<br>dtc-links.diff<br>- removes multiple link code.  I know someone could probably fix it, but it's broken and not needed for now.<br>It made siblings that were bridges be multiple links on the same device.  That messed a lot of things up for Serengeti.  I think it could be changed so that siblings with the same PCI identifier that are bridges become multiple links.  It's ugly, though.<br>
<br>Signed-off-by: Myles Watson <<a href="mailto:mylesgw@gmail.com">mylesgw@gmail.com</a>><br><br>pci_match_v2.diff:<br>Even though Serengeti seems to work the same as v2, it still won't show anything on the display.  The VGA device is not claiming the 0xa0000-0xc0000 address space.  Since SimNOW is a simulator, I trace the memory space to see that the VGA writes are going to RAM. <br>
<br>I put this in to make the PCI config space bit-for-bit identical at VGA ROM run.  It still doesn't work. :(  Any help would be appreciated.<br><br>Thanks,<br>Myles<br>