<table cellspacing="0" cellpadding="0" border="0" ><tr><td valign="top" style="font: inherit;">Peter,<br>I will test it when I get in to work on Monday. <br><br>I was able to get a HDD to be detected. My SATA flash is still being stubborn.<br><br>Here is my log: (Without Peters Patch)<br>boot eax = 0x2badb002<br>
boot ebx = 0xf3400<br>
boot arg = 0xf3400<br>
Current location: 0x100000-0x49e117<br>
Relocating to 0x37c61000-0x37fff117... ok<br>
00:13.0 4387:1002.0 OHCI controller<br>
00:13.1 4388:1002.1 OHCI controller<br>
00:13.2 4389:1002.2 OHCI controller<br>
00:13.3 438a:1002.3 OHCI controller<br>
00:13.4 438b:1002.4 OHCI controller<br>
00:13.5 4386:1002.5 EHCI controller<br>
Not supported.<br>
ERROR: No such CMOS option (boot_devices)<br>
Press <Enter> for default menu.lst (hda1:/boot/filo/menu.lst), or <Esc> for prompt...<br>
menu: hda1:/boot/filo/menu.lst<br>
<br>
dev=hda1, path=/boot/filo/default<br>
Scanning for: SATA<br>
...<br>
found PCI IDE controller 1002:4380<br>
prog_if=0x8f<br>
primary channel: native PCI mode<br>
cmd_base=0x3020 ctrl_base=0x3060<br>
init_controller: drive 0<br>
Waiting for ide0 to become ready for reset... ok<br>
Resetting ide0... ok<br>
Testing for hda<br>
ProbIDE: status=0x58, err=0x0<br>
Testing for hda<br>
ProbIDE: status=0x51, err=0x4<br>
MASTER CHECK: master no  /* slave */ -- drive is 0<br>
NO MASTER -- check slave!<br>
Testing for hda<br>
ProbLBA mode, sectors=156301488<br>
Init device params... ok<br>
hda: LBA 80GB: WDC WD800JD-22JNA0<br>
SLAVE ONLY CHECK: slave yes<br>
Partition 1 start 64260 length 16787925<br>
Unknown filesystem type.<br>
dev=hda1, path=/boot/filo/menu.lst<br>already open<br>
Could not open menu.lst file 'hda1:/boot/filo/menu.lst'. <br>Entering
command line.<br><br>Thanks,<br>Dan Lykowski<br><br>--- On <b>Sat, 1/17/09, Peter Stuge <i><peter@stuge.se></i></b> wrote:<br><blockquote style="border-left: 2px solid rgb(16, 16, 255); margin-left: 5px; padding-left: 5px;"><br>From: Peter Stuge <peter@stuge.se><br>Subject: Re: [coreboot] FILO and SATA on 690/600<br>To: coreboot@coreboot.org<br>Date: Saturday, January 17, 2009, 1:09 AM<br><br><br>-----Inline Attachment Follows-----<br><br><div class="plainMail">Dan Lykowski wrote:<br>> Has anyone been able to boot a SATA drive using FILO on a 690/600<br>> platform?<br>> I keep getting IDE timeouts on detection.<br><br>I would be interested in debug output from filo-0.5, e.g. r52, with<br><a href="http://stuge.se/filo.r52.ide_ext2_pio4_debug6.patch" target="_blank">http://stuge.se/filo.r52.ide_ext2_pio4_debug6.patch</a> applied and both<br>DEBUG_PCI = 1 and DEBUG_IDE = 1 in Config. Please also set<br>USE_GRUB = 0 to make the interface
 easier to work with.<br><br><br>//Peter<br><br>--<br>coreboot mailing list: <a ymailto="mailto:coreboot@coreboot.org" href="/mc/compose?to=coreboot@coreboot.org">coreboot@coreboot.org</a><br><a href="http://www.coreboot.org/mailman/listinfo/coreboot" target="_blank">http://www.coreboot.org/mailman/listinfo/coreboot</a><br></div></blockquote></td></tr></table><br>