[ 0.000000] Linux version 2.6.24-amd2-generic (root@forsteri) (gcc version 4.2.3 (Ubuntu 4.2.3-2ubuntu7)) #1 SMP Tue Jul 15 22:02:29 UTC 2008 (Ubuntu 2.6.24-amd2.2-generic) [ 0.000000] Command line: root=UUID=7bb9e8a5-cbc0-4104-92a3-628f56924494 ro single [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) [ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 0000000037ff0000 (usable) [ 0.000000] BIOS-e820: 0000000037ff0000 - 0000000040000000 (reserved) [ 0.000000] Entering add_active_range(0, 0, 159) 0 entries of 3200 used [ 0.000000] Entering add_active_range(0, 256, 229360) 1 entries of 3200 used [ 0.000000] end_pfn_map = 262144 [ 0.000000] DMI 2.4 present. [ 0.000000] ACPI: RSDP signature @ 0xFFFF8100000F9920 checksum 0 [ 0.000000] ACPI: RSDP 000F9920, 0014 (r0 CORE ) [ 0.000000] ACPI: RSDT 37FF0424, 003C (r1 CORE RSDT 0 CORE 0) [ 0.000000] ACPI: FACP 37FF2B3A, 00F4 (r1 CORE COREBOOT 0 CORE 0) [ 0.000000] ACPI: DSDT 37FF04C0, 267A (r1 AMD DBM690T 10001 INTL 20061109) [ 0.000000] ACPI: FACS 37FF0480, 0040 [ 0.000000] ACPI: HPET 37FF2C2E, 0038 (r1 CORE AMD64 0 CORE 0) [ 0.000000] ACPI: APIC 37FF2C66, 005C (r1 CORE MADT 0 CORE 0) [ 0.000000] ACPI: SRAT 37FF2CC2, 00A0 (r1 CORE SRAT 0 CORE 0) [ 0.000000] ACPI: SLIT 37FF2D62, 0024 (r1 CORE SLIT 0 CORE 0) [ 0.000000] ACPI: SSDT 37FF2D86, 0158 (r1 AMD-K8 AMD-ACPI 6040000 INTL 20061109) [ 0.000000] SRAT: PXM 0 -> APIC 0 -> Node 0 [ 0.000000] SRAT: PXM 0 -> APIC 1 -> Node 0 [ 0.000000] SRAT: Node 0 PXM 0 0-a0000 [ 0.000000] Entering add_active_range(0, 0, 159) 0 entries of 3200 used [ 0.000000] SRAT: Node 0 PXM 0 0-40000000 [ 0.000000] Entering add_active_range(0, 0, 159) 1 entries of 3200 used [ 0.000000] Entering add_active_range(0, 256, 229360) 1 entries of 3200 used [ 0.000000] ACPI: SLIT table looks invalid. Not used. [ 0.000000] NUMA: Using 63 for the hash shift. [ 0.000000] Bootmem setup node 0 0000000000000000-0000000037ff0000 [ 0.000000] No mptable found. [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0 -> 4096 [ 0.000000] DMA32 4096 -> 1048576 [ 0.000000] Normal 1048576 -> 1048576 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[2] active PFN ranges [ 0.000000] 0: 0 -> 159 [ 0.000000] 0: 256 -> 229360 [ 0.000000] On node 0 totalpages: 229263 [ 0.000000] DMA zone: 56 pages used for memmap [ 0.000000] DMA zone: 1206 pages reserved [ 0.000000] DMA zone: 2737 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 3079 pages used for memmap [ 0.000000] DMA32 zone: 222185 pages, LIFO batch:31 [ 0.000000] Normal zone: 0 pages used for memmap [ 0.000000] Movable zone: 0 pages used for memmap [ 0.000000] ATI board detected. Disabling timer routing over 8254. [ 0.000000] ACPI: PM-Timer IO Port: 0x818 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] Processor #0 (Bootup-CPU) [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) [ 0.000000] Processor #1 [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 2, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Setting APIC routing to flat [ 0.000000] ACPI: HPET id: 0x102282a0 base: 0xfed00000 [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] swsusp: Registered nosave memory region: 000000000009f000 - 00000000000a0000 [ 0.000000] swsusp: Registered nosave memory region: 00000000000a0000 - 00000000000f0000 [ 0.000000] swsusp: Registered nosave memory region: 00000000000f0000 - 0000000000100000 [ 0.000000] Allocating PCI resources starting at 50000000 (gap: 40000000:c0000000) [ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs [ 0.000000] PERCPU: Allocating 34656 bytes of per cpu data [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 224922 [ 0.000000] Policy zone: DMA32 [ 0.000000] Kernel command line: root=UUID=7bb9e8a5-cbc0-4104-92a3-628f56924494 ro single [ 0.000000] Initializing CPU#0 [ 0.000000] PID hash table entries: 4096 (order: 12, 32768 bytes) [ 0.000000] hpet clockevent registered [ 0.000000] TSC calibrated against HPET [ 21.090899] Marking TSC unstable due to TSCs unsynchronized [ 21.090901] time.c: Detected 2100.081 MHz processor. [ 21.091659] Console: colour VGA+ 80x25 [ 21.091662] console [tty0] enabled [ 21.093960] Checking aperture... [ 21.093997] CPU 0: aperture @ f8000000 size 64 MB [ 21.102524] Memory: 892052k/917440k available (2466k kernel code, 25000k reserved, 1313k data, 316k init) [ 21.102601] SLUB: Genslabs=12, HWalign=64, Order=0-1, MinObjects=4, CPUs=2, Nodes=1 [ 21.180775] Calibrating delay using timer specific routine.. 4203.29 BogoMIPS (lpj=8406597) [ 21.180876] Security Framework initialized [ 21.180917] SELinux: Disabled at boot. [ 21.180964] AppArmor: AppArmor initialized [ 21.181003] Failure registering capabilities with primary security module. [ 21.181123] Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes) [ 21.181767] Inode-cache hash table entries: 65536 (order: 7, 524288 bytes) [ 21.182095] Mount-cache hash table entries: 256 [ 21.182254] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) [ 21.182295] CPU: L2 Cache: 512K (64 bytes/line) [ 21.182333] CPU 0/0 -> Node 0 [ 21.182369] CPU: Physical Processor ID: 0 [ 21.182404] CPU: Processor Core ID: 0 [ 21.182461] SMP alternatives: switching to UP code [ 21.183065] Early unpacking initramfs... done [ 21.468791] ACPI: Core revision 20070126 [ 21.468860] ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not found. [ 21.510585] Using local APIC timer interrupts. [ 21.558186] APIC timer calibration result 12500477 [ 21.558188] Detected 12.500 MHz APIC timer. [ 21.558303] SMP alternatives: switching to SMP code [ 21.558789] Booting processor 1/2 APIC 0x1 [ 21.568899] Initializing CPU#1 [ 21.646121] Calibrating delay using timer specific routine.. 4200.16 BogoMIPS (lpj=8400320) [ 21.646127] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) [ 21.646129] CPU: L2 Cache: 512K (64 bytes/line) [ 21.646131] CPU 1/1 -> Node 0 [ 21.646133] CPU: Physical Processor ID: 0 [ 21.646134] CPU: Processor Core ID: 1 [ 21.646229] AMD Turion(tm) 64 X2 Mobile Technology TL-62 stepping 02 [ 21.646318] Brought up 2 CPUs [ 21.646714] CPU0 attaching sched-domain: [ 21.646716] domain 0: span 03 [ 21.646718] groups: 01 02 [ 21.646720] domain 1: span 03 [ 21.646722] groups: 03 [ 21.646723] CPU1 attaching sched-domain: [ 21.646725] domain 0: span 03 [ 21.646726] groups: 02 01 [ 21.646728] domain 1: span 03 [ 21.646729] groups: 03 [ 21.646940] net_namespace: 120 bytes [ 21.647365] Time: 12:29:24 Date: 03/23/99 [ 21.647432] NET: Registered protocol family 16 [ 21.647643] ACPI: bus type pci registered [ 21.647750] PCI: Using configuration type 1 [ 21.648652] ACPI: EC: Look up EC in DSDT [ 21.778122] ACPI: Interpreter enabled [ 21.778161] ACPI: (supports S0 S1 S2 S3 S4 S5) [ 21.778394] ACPI: Using IOAPIC for interrupt routing [ 21.780809] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 21.781059] pci 0000:00:12.0: set SATA to AHCI mode [ 21.782266] PCI: Transparent bridge - 0000:00:14.4 [ 21.782329] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 21.782434] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGPB._PRT] [ 21.782486] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PBR4._PRT] [ 21.782549] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PBR5._PRT] [ 21.782613] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PBR6._PRT] [ 21.782676] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PBR7._PRT] [ 21.782738] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PIBR._PRT] [ 21.785734] ACPI: PCI Interrupt Link [INTA] (IRQs 3 4 5 7 10 11 12 15) *0, disabled. [ 21.786241] ACPI: PCI Interrupt Link [INTB] (IRQs 3 4 5 7 10 11 12 15) *0, disabled. [ 21.786736] ACPI: PCI Interrupt Link [INTC] (IRQs 3 4 5 7 10 11 12 15) *0, disabled. [ 21.787230] ACPI: PCI Interrupt Link [INTD] (IRQs 3 4 5 7 10 11 12 15) *0, disabled. [ 21.787724] ACPI: PCI Interrupt Link [INTE] (IRQs 3 4 5 7 10 11 12 15) *0, disabled. [ 21.788214] ACPI: PCI Interrupt Link [INTF] (IRQs 9) *0, disabled. [ 21.788488] ACPI: PCI Interrupt Link [INTG] (IRQs 3 4 5 7 10 11 12 15) *0, disabled. [ 21.788981] ACPI: PCI Interrupt Link [INTH] (IRQs 3 4 5 7 10 11 12 15) *0, disabled. [ 21.789492] ACPI: Power Resource [PFN0] (on) [ 21.789570] Linux Plug and Play Support v0.97 (c) Adam Belay [ 21.789636] pnp: PnP ACPI init [ 21.789678] ACPI: bus type pnp registered [ 21.790563] pnp: PnP ACPI: found 6 devices [ 21.790603] ACPI: ACPI bus type pnp unregistered [ 21.790847] PCI: Using ACPI for IRQ routing [ 21.790888] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report [ 21.791000] PCI: Cannot allocate resource region 0 of device 0000:05:00.0 [ 21.805943] NET: Registered protocol family 8 [ 21.805983] NET: Registered protocol family 20 [ 21.806100] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0 [ 21.806291] hpet0: 4 32-bit timers, 14318180 Hz [ 21.807378] AppArmor: AppArmor Filesystem Enabled [ 21.809921] Time: hpet clocksource has been installed. [ 21.809968] Switched to high resolution mode on CPU 0 [ 21.810052] Switched to high resolution mode on CPU 1 [ 21.818257] PCI: Bridge: 0000:00:01.0 [ 21.818295] IO window: 1000-1fff [ 21.818333] MEM window: fc000000-fc1fffff [ 21.818369] PREFETCH window: f0000000-f7ffffff [ 21.818406] PCI: Bridge: 0000:00:04.0 [ 21.818442] IO window: disabled. [ 21.818479] MEM window: disabled. [ 21.818515] PREFETCH window: disabled. [ 21.818552] PCI: Bridge: 0000:00:05.0 [ 21.818589] IO window: disabled. [ 21.818625] MEM window: disabled. [ 21.818661] PREFETCH window: disabled. [ 21.818699] PCI: Bridge: 0000:00:06.0 [ 21.818735] IO window: disabled. [ 21.818772] MEM window: disabled. [ 21.818808] PREFETCH window: disabled. [ 21.818850] PCI: Bridge: 0000:00:07.0 [ 21.818890] IO window: disabled. [ 21.818927] MEM window: 50000000-500fffff [ 21.818964] PREFETCH window: disabled. [ 21.819002] PCI: Bridge: 0000:00:14.4 [ 21.819039] IO window: 2000-2fff [ 21.819079] MEM window: fc200000-fc2fffff [ 21.819117] PREFETCH window: disabled. [ 21.819170] PCI: Setting latency timer of device 0000:00:04.0 to 64 [ 21.819177] PCI: Setting latency timer of device 0000:00:05.0 to 64 [ 21.819183] PCI: Setting latency timer of device 0000:00:06.0 to 64 [ 21.819188] PCI: Enabling device 0000:00:07.0 (0000 -> 0002) [ 21.819227] PCI: Setting latency timer of device 0000:00:07.0 to 64 [ 21.819243] NET: Registered protocol family 2 [ 21.853913] IP route cache hash table entries: 32768 (order: 6, 262144 bytes) [ 21.854381] TCP established hash table entries: 131072 (order: 9, 2097152 bytes) [ 21.855657] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 21.856275] TCP: Hash tables configured (established 131072 bind 65536) [ 21.856317] TCP reno registered [ 21.865970] checking if image is initramfs... it is [ 22.428752] Freeing initrd memory: 7452k freed [ 22.433663] audit: initializing netlink socket (disabled) [ 22.433712] audit(4077952165.304:1): initialized [ 22.435544] VFS: Disk quotas dquot_6.5.1 [ 22.435655] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 22.435825] io scheduler noop registered [ 22.435865] io scheduler anticipatory registered [ 22.436454] io scheduler deadline registered [ 22.436583] io scheduler cfq registered (default) [ 22.436701] Boot video device is 0000:01:05.0 [ 22.436810] PCI: Setting latency timer of device 0000:00:04.0 to 64 [ 22.436829] assign_interrupt_mode Found MSI capability [ 22.436889] Allocate Port Service[0000:00:04.0:pcie00] [ 22.436948] PCI: Setting latency timer of device 0000:00:05.0 to 64 [ 22.436966] assign_interrupt_mode Found MSI capability [ 22.437021] Allocate Port Service[0000:00:05.0:pcie00] [ 22.437074] PCI: Setting latency timer of device 0000:00:06.0 to 64 [ 22.437091] assign_interrupt_mode Found MSI capability [ 22.437169] Allocate Port Service[0000:00:06.0:pcie00] [ 22.437222] PCI: Setting latency timer of device 0000:00:07.0 to 64 [ 22.437239] assign_interrupt_mode Found MSI capability [ 22.437294] Allocate Port Service[0000:00:07.0:pcie00] [ 22.464504] Real Time Clock Driver v1.12ac [ 22.464698] hpet_resources: 0xfed00000 is busy [ 22.464722] Linux agpgart interface v0.102 [ 22.464759] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled [ 22.464939] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 22.465883] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize [ 22.465987] input: Macintosh mouse button emulation as /devices/virtual/input/input0 [ 22.466145] PNP: No PS/2 controller found. Probing ports directly. [ 22.468225] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 22.468267] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 22.486115] mice: PS/2 mouse device common for all mice [ 22.486189] cpuidle: using governor ladder [ 22.486231] cpuidle: using governor menu [ 22.486385] NET: Registered protocol family 1 [ 22.486475] registered taskstats version 1 [ 22.486629] Magic number: 11:911:481 [ 22.486783] /root/build/ubuntu/linux-source/linux-source/drivers/rtc/hctosys.c: unable to open rtc device (rtc0) [ 22.486830] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 22.486868] EDD information not available. [ 22.486913] Freeing unused kernel memory: 316k freed [ 22.517984] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1 [ 22.641009] ACPI: Fan [FAN0] (on) [ 22.669936] ACPI: Thermal Zone [TZ00] (40 C) [ 22.900085] SCSI subsystem initialized [ 22.912652] usbcore: registered new interface driver usbfs [ 22.912711] usbcore: registered new interface driver hub [ 22.913050] libata version 3.00 loaded. [ 22.915231] usbcore: registered new device driver usb [ 22.915859] ahci 0000:00:12.0: version 3.0 [ 22.915891] ACPI: PCI Interrupt 0000:00:12.0[A] -> GSI 22 (level, low) -> IRQ 22 [ 22.915985] ahci 0000:00:12.0: controller can't do 64bit DMA, forcing 32bit [ 22.916023] ahci 0000:00:12.0: controller can't do PMP, turning off CAP_PMP [ 22.917666] ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver [ 23.016424] 8139too Fast Ethernet driver 0.9.28 [ 23.915246] ahci 0000:00:12.0: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl SATA mode [ 23.915295] ahci 0000:00:12.0: flags: ncq sntf ilck pm led clo pio slum part [ 23.916347] scsi0 : ahci [ 23.916459] scsi1 : ahci [ 23.916534] scsi2 : ahci [ 23.916611] scsi3 : ahci [ 23.916721] ata1: SATA max UDMA/133 abar m1024@0xfc309000 port 0xfc309100 irq 22 [ 23.916765] ata2: SATA max UDMA/133 abar m1024@0xfc309000 port 0xfc309180 irq 22 [ 23.916808] ata3: SATA max UDMA/133 abar m1024@0xfc309000 port 0xfc309200 irq 22 [ 23.916851] ata4: SATA max UDMA/133 abar m1024@0xfc309000 port 0xfc309280 irq 22 [ 24.226808] ata1: SATA link down (SStatus 0 SControl 300) [ 24.538405] ata2: SATA link down (SStatus 0 SControl 300) [ 25.013795] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 25.060406] ata3.00: ATA-7: ST3250620NS, 3.AEG, max UDMA/133 [ 25.060446] ata3.00: 488397168 sectors, multi 0: LBA48 NCQ (depth 31/32) [ 25.118644] ata3.00: configured for UDMA/133 [ 25.429254] ata4: SATA link down (SStatus 0 SControl 300) [ 25.429410] scsi 2:0:0:0: Direct-Access ATA ST3250620NS 3.AE PQ: 0 ANSI: 5 [ 25.430319] ACPI: PCI Interrupt 0000:00:13.5[D] -> GSI 19 (level, low) -> IRQ 19 [ 25.430411] ehci_hcd 0000:00:13.5: EHCI Host Controller [ 25.430731] ehci_hcd 0000:00:13.5: new USB bus registered, assigned bus number 1 [ 25.430820] ehci_hcd 0000:00:13.5: debug port 1 [ 25.430872] ehci_hcd 0000:00:13.5: irq 19, io mem 0xfc30a000 [ 25.436816] Driver 'sd' needs updating - please use bus_type methods [ 25.442228] ehci_hcd 0000:00:13.5: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 [ 25.442372] usb usb1: configuration #1 chosen from 1 choice [ 25.442433] hub 1-0:1.0: USB hub found [ 25.442476] hub 1-0:1.0: 10 ports detected [ 25.446300] sd 2:0:0:0: [sda] 488397168 512-byte hardware sectors (250059 MB) [ 25.446356] sd 2:0:0:0: [sda] Write Protect is off [ 25.446395] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 25.446409] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 25.446504] sd 2:0:0:0: [sda] 488397168 512-byte hardware sectors (250059 MB) [ 25.446551] sd 2:0:0:0: [sda] Write Protect is off [ 25.446589] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 25.446601] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 25.446644] sda: sda1 sda2 < sda5 > [ 25.486531] sd 2:0:0:0: [sda] Attached SCSI disk [ 25.490390] sd 2:0:0:0: Attached scsi generic sg0 type 0 [ 25.546330] ACPI: PCI Interrupt 0000:06:05.0[A] -> GSI 20 (level, low) -> IRQ 20 [ 25.547378] eth0: RealTek RTL8139 at 0x2000, 00:e0:4c:f4:21:28, IRQ 20 [ 25.547419] eth0: Identified 8139 chip type 'RTL-8100B/8139D' [ 25.547606] tg3.c:v3.86 (November 9, 2007) [ 25.547664] PCI: Enabling device 0000:05:00.0 (0000 -> 0002) [ 25.547706] ACPI: PCI Interrupt 0000:05:00.0[A] -> GSI 19 (level, low) -> IRQ 19 [ 25.547785] PCI: Setting latency timer of device 0000:05:00.0 to 64 [ 25.549960] 8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004) [ 25.665553] tg3: (0000:05:00.0) phy probe failed, err -19 [ 25.822496] Attempting manual resume [ 25.822535] swsusp: Resume From Partition 8:5 [ 25.822537] PM: Checking swsusp image. [ 25.822736] PM: Resume from disk failed. [ 25.839897] EXT3-fs: INFO: recovery required on readonly filesystem. [ 25.839943] EXT3-fs: write access will be enabled during recovery. [ 25.885588] kjournald starting. Commit interval 5 seconds [ 25.885646] EXT3-fs: recovery complete. [ 25.886032] EXT3-fs: mounted filesystem with ordered data mode. [ 26.459942] tg3: Problem fetching invariants of chip, aborting. [ 26.460006] ACPI: PCI interrupt for device 0000:05:00.0 disabled [ 26.460250] ACPI: PCI Interrupt 0000:00:13.0[A] -> GSI 16 (level, low) -> IRQ 16 [ 26.460336] ohci_hcd 0000:00:13.0: OHCI Host Controller [ 26.460406] ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 2 [ 26.460467] ohci_hcd 0000:00:13.0: irq 16, io mem 0xfc304000 [ 26.519932] usb usb2: configuration #1 chosen from 1 choice [ 26.519991] hub 2-0:1.0: USB hub found [ 26.520034] hub 2-0:1.0: 2 ports detected [ 26.627798] ACPI: PCI Interrupt 0000:00:13.1[B] -> GSI 17 (level, low) -> IRQ 17 [ 26.627890] ohci_hcd 0000:00:13.1: OHCI Host Controller [ 26.627948] ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 3 [ 26.628006] ohci_hcd 0000:00:13.1: irq 17, io mem 0xfc305000 [ 26.683711] usb usb3: configuration #1 chosen from 1 choice [ 26.683771] hub 3-0:1.0: USB hub found [ 26.683814] hub 3-0:1.0: 2 ports detected [ 26.787600] ACPI: PCI Interrupt 0000:00:13.2[C] -> GSI 18 (level, low) -> IRQ 18 [ 26.787693] ohci_hcd 0000:00:13.2: OHCI Host Controller [ 26.787752] ohci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 4 [ 26.787810] ohci_hcd 0000:00:13.2: irq 18, io mem 0xfc306000 [ 26.847526] usb usb4: configuration #1 chosen from 1 choice [ 26.847589] hub 4-0:1.0: USB hub found [ 26.847633] hub 4-0:1.0: 2 ports detected [ 26.951390] ACPI: PCI Interrupt 0000:00:13.3[B] -> GSI 17 (level, low) -> IRQ 17 [ 26.951488] ohci_hcd 0000:00:13.3: OHCI Host Controller [ 26.951548] ohci_hcd 0000:00:13.3: new USB bus registered, assigned bus number 5 [ 26.951605] ohci_hcd 0000:00:13.3: irq 17, io mem 0xfc307000 [ 27.011308] usb usb5: configuration #1 chosen from 1 choice [ 27.011373] hub 5-0:1.0: USB hub found [ 27.011416] hub 5-0:1.0: 2 ports detected [ 27.119152] ACPI: PCI Interrupt 0000:00:13.4[C] -> GSI 18 (level, low) -> IRQ 18 [ 27.119244] ohci_hcd 0000:00:13.4: OHCI Host Controller [ 27.119301] ohci_hcd 0000:00:13.4: new USB bus registered, assigned bus number 6 [ 27.119357] ohci_hcd 0000:00:13.4: irq 18, io mem 0xfc308000 [ 27.179103] usb usb6: configuration #1 chosen from 1 choice [ 27.179171] hub 6-0:1.0: USB hub found [ 27.179214] hub 6-0:1.0: 2 ports detected [ 27.279108] ACPI: PCI Interrupt 0000:00:14.1[A] -> GSI 16 (level, low) -> IRQ 16 [ 27.280024] scsi4 : pata_atiixp [ 27.280130] scsi5 : pata_atiixp [ 27.280501] ata5: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x3010 irq 14 [ 27.281085] ata6: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x3018 irq 15 [ 31.304603] input: PC Speaker as /devices/platform/pcspkr/input/input2 [ 31.513737] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 [ 31.513784] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx [ 31.551524] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 31.566490] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 31.620308] piix4_smbus 0000:00:14.0: Found 0000:00:14.0 device [ 31.649317] input: Power Button (FF) as /devices/virtual/input/input3 [ 31.710167] ACPI: Power Button (FF) [PWRF] [ 31.710281] input: Power Button (CM) as /devices/virtual/input/input4 [ 31.781224] ACPI: Power Button (CM) [PWRB] [ 31.970857] udev: renamed network interface eth0 to eth12 [ 32.180257] fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies, Starnberg, GERMANY' taints kernel. [ 32.210260] [fglrx] vendor: 1002 device: 791f count: 1 [ 32.210395] [fglrx] Maximum main memory to use for locked dma buffers: 798 MBytes. [ 32.210792] [fglrx] PAT is enabled successfully! [ 32.210855] [fglrx] module loaded - fglrx 8.50.3 [Jun 2 2008] with 1 minors [ 32.305461] ACPI: PCI Interrupt 0000:00:14.2[A] -> GSI 16 (level, low) -> IRQ 16 [ 32.339264] hda_codec: Unknown model for ALC882, trying auto-probe from BIOS... [ 32.375629] ACPI: PCI Interrupt 0000:01:05.2[B] -> GSI 19 (level, low) -> IRQ 19 [ 32.666118] input: ImExPS/2 Generic Explorer Mouse as /devices/platform/i8042/serio1/input/input5 [ 34.083445] loop: module loaded [ 34.131602] lp: driver loaded but no devices found [ 34.404997] Adding 2634620k swap on /dev/sda5. Priority:-1 extents:1 across:2634620k [ 34.741594] EXT3 FS on sda1, internal journal [ 35.321762] ip_tables: (C) 2000-2006 Netfilter Core Team [ 36.747747] NET: Registered protocol family 17