[ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 2.6.27-7-generic (buildd@yellow) (gcc version 4.3.2 (Ubuntu 4.3.2-1ubuntu10) ) #1 SMP Fri Oct 24 06:40:41 UTC 2008 (Ubuntu 2.6.27-7.14-generic) [ 0.000000] Command line: root=UUID=0d3b5a6f-40ed-46b8-8243-5a8bb9197fa3 ro quiet splash [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] Centaur CentaurHauls [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) [ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 0000000037ff0000 (usable) [ 0.000000] BIOS-e820: 0000000037ff0000 - 0000000040000000 (reserved) [ 0.000000] last_pfn = 0x37ff0 max_arch_pfn = 0x3ffffffff [ 0.000000] init_memory_mapping [ 0.000000] 0000000000 - 0037e00000 page 2M [ 0.000000] 0037e00000 - 0037ff0000 page 4k [ 0.000000] kernel direct mapping tables up to 37ff0000 @ 8000-b000 [ 0.000000] last_map_addr: 37ff0000 end: 37ff0000 [ 0.000000] RAMDISK: 377a9000 - 37fdf279 [ 0.000000] DMI not present or invalid. [ 0.000000] ACPI: RSDP 000F92D0, 0014 (r0 CORE ) [ 0.000000] ACPI: RSDT 37FF0424, 0034 (r1 CORE RSDT 0 CORE 0) [ 0.000000] ACPI: HPET 37FF046C, 0038 (r1 CORE AMD64 0 CORE 0) [ 0.000000] ACPI: APIC 37FF04A4, 005C (r1 CORE MADT 0 CORE 0) [ 0.000000] ACPI: SSDT 37FF0500, 037A (r2 CORE DYNADATA 2A GENA 2A) [ 0.000000] ACPI: FACP 37FF2F34, 00F4 (r1 CORE COREBOOT 0 CORE 0) [ 0.000000] ACPI: DSDT 37FF08BA, 267A (r1 AMD DBM690T 10001 INTL 20061109) [ 0.000000] ACPI: FACS 37FF087A, 0040 [ 0.000000] Scanning NUMA topology in Northbridge 24 [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at 0000000000000000-0000000037ff0000 [ 0.000000] Bootmem setup node 0 0000000000000000-0000000037ff0000 [ 0.000000] NODE_DATA [0000000000001000 - 0000000000005fff] [ 0.000000] bootmap [0000000000009000 - 000000000000ffff] pages 7 [ 0.000000] (6 early reservations) ==> bootmem [0000000000 - 0037ff0000] [ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] [ 0.000000] #1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000] [ 0.000000] #2 [0000200000 - 00008b8f9c] TEXT DATA BSS ==> [0000200000 - 00008b8f9c] [ 0.000000] #3 [00377a9000 - 0037fdf279] RAMDISK ==> [00377a9000 - 0037fdf279] [ 0.000000] #4 [000009fc00 - 0000100000] BIOS reserved ==> [000009fc00 - 0000100000] [ 0.000000] #5 [0000008000 - 0000009000] PGTABLE ==> [0000008000 - 0000009000] [ 0.000000] [ffffe20000000000-ffffe20000dfffff] PMD -> [ffff880001200000-ffff880001ffffff] on node 0 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000000 -> 0x00001000 [ 0.000000] DMA32 0x00001000 -> 0x00100000 [ 0.000000] Normal 0x00100000 -> 0x00100000 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[2] active PFN ranges [ 0.000000] 0: 0x00000000 -> 0x0000009f [ 0.000000] 0: 0x00000100 -> 0x00037ff0 [ 0.000000] On node 0 totalpages: 229263 [ 0.000000] DMA zone: 2115 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 221744 pages, LIFO batch:31 [ 0.000000] ACPI: PM-Timer IO Port: 0x818 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 2, version 0, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Setting APIC routing to flat [ 0.000000] ACPI: HPET id: 0x102282a0 base: 0xfed00000 [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000 [ 0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000 [ 0.000000] Allocating PCI resources starting at 50000000 (gap: 40000000:c0000000) [ 0.000000] PERCPU: Allocating 64928 bytes of per cpu data [ 0.000000] NR_CPUS: 64, nr_cpu_ids: 2, nr_node_ids 1 [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 223859 [ 0.000000] Policy zone: DMA32 [ 0.000000] Kernel command line: root=UUID=0d3b5a6f-40ed-46b8-8243-5a8bb9197fa3 ro quiet splash [ 0.000000] Initializing CPU#0 [ 0.000000] PID hash table entries: 4096 (order: 12, 32768 bytes) [ 0.000000] TSC: PIT calibration confirmed by PMTIMER. [ 0.000000] TSC: using PIT calibration value [ 0.000000] Detected 2100.064 MHz processor. [ 0.004000] Console: colour VGA+ 80x25 [ 0.004000] console [tty0] enabled [ 0.004000] Checking aperture... [ 0.004000] No AGP bridge found [ 0.004000] Node 0: aperture @ f8000000 size 64 MB [ 0.004000] Memory: 887148k/917440k available (3112k kernel code, 29904k reserved, 1575k data, 536k init) [ 0.004000] CPA: page pool initialized 1 of 1 pages preallocated [ 0.004000] SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 [ 0.004000] hpet clockevent registered [ 0.004009] Calibrating delay loop (skipped), value calculated using timer frequency.. 4200.12 BogoMIPS (lpj=8400256) [ 0.004034] Security Framework initialized [ 0.004040] SELinux: Disabled at boot. [ 0.004054] AppArmor: AppArmor initialized [ 0.004156] Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.004862] Inode-cache hash table entries: 65536 (order: 7, 524288 bytes) [ 0.005152] Mount-cache hash table entries: 256 [ 0.005327] Initializing cgroup subsys ns [ 0.005330] Initializing cgroup subsys cpuacct [ 0.005333] Initializing cgroup subsys memory [ 0.005349] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) [ 0.005351] CPU: L2 Cache: 512K (64 bytes/line) [ 0.005353] CPU 0/0 -> Node 0 [ 0.005354] tseg: 0000000000 [ 0.005367] CPU: Physical Processor ID: 0 [ 0.005369] CPU: Processor Core ID: 0 [ 0.005378] using C1E aware idle routine [ 0.006759] ACPI: Core revision 20080609 [ 0.007550] ACPI: Checking initramfs for custom DSDT [ 0.338964] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.378661] CPU0: AMD Turion(tm) 64 X2 Mobile Technology TL-62 stepping 02 [ 0.378666] Using local APIC timer interrupts. [ 0.380025] APIC timer calibration result 12500398 [ 0.380027] Detected 12.500 MHz APIC timer. [ 0.380186] Booting processor 1/1 ip 6000 [ 0.004000] Initializing CPU#1 [ 0.004000] Calibrating delay using timer specific routine.. 4200.20 BogoMIPS (lpj=8400408) [ 0.004000] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) [ 0.004000] CPU: L2 Cache: 512K (64 bytes/line) [ 0.004000] CPU 1/1 -> Node 0 [ 0.004000] CPU: Physical Processor ID: 0 [ 0.004000] CPU: Processor Core ID: 1 [ 0.468245] CPU1: AMD Turion(tm) 64 X2 Mobile Technology TL-62 stepping 02 [ 0.468261] Brought up 2 CPUs [ 0.468264] Total of 2 processors activated (8400.33 BogoMIPS). [ 0.468307] CPU0 attaching sched-domain: [ 0.468310] domain 0: span 0-1 level CPU [ 0.468313] groups: 0 1 [ 0.468316] domain 1: span 0-1 level NODE [ 0.468318] groups: 0-1 [ 0.468323] CPU1 attaching sched-domain: [ 0.468325] domain 0: span 0-1 level CPU [ 0.468327] groups: 1 0 [ 0.468330] domain 1: span 0-1 level NODE [ 0.468332] groups: 0-1 [ 0.468416] net_namespace: 1552 bytes [ 0.468416] Booting paravirtualized kernel on bare hardware [ 0.468416] Time: 17:05:14 Date: 04/02/99 [ 0.468416] NET: Registered protocol family 16 [ 0.468416] node 0 link 0: io port [1000, 3fff] [ 0.468416] TOM: 0000000040000000 aka 1024M [ 0.468416] node 0 link 0: mmio [a0000, bffff] [ 0.468416] node 0 link 0: mmio [fc000000, fc4fffff] [ 0.468416] node 0 link 0: mmio [f0000000, f7ffffff] [ 0.468416] TOM2: 0000000000000000 aka 0M [ 0.468416] bus: [00,06] on node 0 link 0 [ 0.468416] bus: 00 index 0 io port: [0, ffff] [ 0.468416] bus: 00 index 1 mmio: [a0000, bffff] [ 0.468416] bus: 00 index 2 mmio: [f8000000, ffffffff] [ 0.468416] bus: 00 index 3 mmio: [40000000, f7ffffff] [ 0.468416] ACPI: bus type pci registered [ 0.468416] PCI: Using configuration type 1 for base access [ 0.468473] ACPI: EC: Look up EC in DSDT [ 0.600370] ACPI: Interpreter enabled [ 0.600372] ACPI: (supports S0 S1 S2 S3 S4 S5) [ 0.600392] ACPI: Using IOAPIC for interrupt routing [ 0.604075] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 0.604107] PCI: 0000:00:00.0 reg 1c 64bit mmio: [e0000000, ffffffff] [ 0.604120] pci 0000:00:04.0: PME# supported from D0 D3hot D3cold [ 0.604124] pci 0000:00:04.0: PME# disabled [ 0.604146] pci 0000:00:05.0: PME# supported from D0 D3hot D3cold [ 0.604149] pci 0000:00:05.0: PME# disabled [ 0.604171] pci 0000:00:06.0: PME# supported from D0 D3hot D3cold [ 0.604173] pci 0000:00:06.0: PME# disabled [ 0.604196] pci 0000:00:07.0: PME# supported from D0 D3hot D3cold [ 0.604199] pci 0000:00:07.0: PME# disabled [ 0.604245] PCI: 0000:00:12.0 reg 10 io port: [3020, 3027] [ 0.604253] PCI: 0000:00:12.0 reg 14 io port: [3060, 3063] [ 0.604259] PCI: 0000:00:12.0 reg 18 io port: [3030, 3037] [ 0.604266] PCI: 0000:00:12.0 reg 1c io port: [3070, 3073] [ 0.604273] PCI: 0000:00:12.0 reg 20 io port: [3000, 300f] [ 0.604280] PCI: 0000:00:12.0 reg 24 32bit mmio: [fc409000, fc4093ff] [ 0.604305] pci 0000:00:12.0: set SATA to AHCI mode [ 0.604329] PCI: 0000:00:13.0 reg 10 32bit mmio: [fc404000, fc404fff] [ 0.604384] PCI: 0000:00:13.1 reg 10 32bit mmio: [fc405000, fc405fff] [ 0.604438] PCI: 0000:00:13.2 reg 10 32bit mmio: [fc406000, fc406fff] [ 0.604493] PCI: 0000:00:13.3 reg 10 32bit mmio: [fc407000, fc407fff] [ 0.604548] PCI: 0000:00:13.4 reg 10 32bit mmio: [fc408000, fc408fff] [ 0.604622] PCI: 0000:00:13.5 reg 10 32bit mmio: [fc40a000, fc40a0ff] [ 0.604669] pci 0000:00:13.5: supports D1 [ 0.604671] pci 0000:00:13.5: supports D2 [ 0.604673] pci 0000:00:13.5: PME# supported from D0 D1 D2 D3hot [ 0.604677] pci 0000:00:13.5: PME# disabled [ 0.604708] PCI: 0000:00:14.0 reg 10 io port: [b00, b0f] [ 0.604715] PCI: 0000:00:14.0 reg 14 32bit mmio: [fed00000, fed003ff] [ 0.604770] PCI: 0000:00:14.1 reg 10 io port: [3040, 3047] [ 0.604777] PCI: 0000:00:14.1 reg 14 io port: [3080, 3083] [ 0.604784] PCI: 0000:00:14.1 reg 18 io port: [3050, 3057] [ 0.604791] PCI: 0000:00:14.1 reg 1c io port: [3090, 3093] [ 0.604798] PCI: 0000:00:14.1 reg 20 io port: [3010, 301f] [ 0.604850] PCI: 0000:00:14.2 reg 10 64bit mmio: [fc400000, fc403fff] [ 0.604891] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold [ 0.604895] pci 0000:00:14.2: PME# disabled [ 0.605073] PCI: 0000:01:05.0 reg 10 32bit mmio: [f0000000, f7ffffff] [ 0.605081] PCI: 0000:01:05.0 reg 18 64bit mmio: [fc100000, fc10ffff] [ 0.605084] PCI: 0000:01:05.0 reg 20 io port: [1000, 10ff] [ 0.605088] PCI: 0000:01:05.0 reg 24 32bit mmio: [fc000000, fc0fffff] [ 0.605097] pci 0000:01:05.0: supports D1 [ 0.605099] pci 0000:01:05.0: supports D2 [ 0.605116] PCI: 0000:01:05.2 reg 10 64bit mmio: [fc110000, fc113fff] [ 0.605147] PCI: bridge 0000:00:01.0 io port: [1000, 1fff] [ 0.605150] PCI: bridge 0000:00:01.0 32bit mmio: [fc000000, fc1fffff] [ 0.605154] PCI: bridge 0000:00:01.0 64bit mmio pref: [f0000000, f7ffffff] [ 0.605347] PCI: 0000:05:00.0 reg 10 64bit mmio: [fc200000, fc20ffff] [ 0.605387] pci 0000:05:00.0: PME# supported from D3hot D3cold [ 0.605391] pci 0000:05:00.0: PME# disabled [ 0.605439] PCI: bridge 0000:00:07.0 32bit mmio: [fc200000, fc2fffff] [ 0.605493] PCI: 0000:06:05.0 reg 10 io port: [2000, 20ff] [ 0.605502] PCI: 0000:06:05.0 reg 14 32bit mmio: [fc320000, fc3200ff] [ 0.605536] PCI: 0000:06:05.0 reg 30 32bit mmio: [fc300000, fc31ffff] [ 0.605555] pci 0000:06:05.0: supports D1 [ 0.605557] pci 0000:06:05.0: supports D2 [ 0.605558] pci 0000:06:05.0: PME# supported from D1 D2 D3hot [ 0.605563] pci 0000:06:05.0: PME# disabled [ 0.605608] pci 0000:00:14.4: transparent bridge [ 0.605613] PCI: bridge 0000:00:14.4 io port: [2000, 2fff] [ 0.605617] PCI: bridge 0000:00:14.4 32bit mmio: [fc300000, fc3fffff] [ 0.605642] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.605828] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGPB._PRT] [ 0.605904] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PBR4._PRT] [ 0.606004] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PBR5._PRT] [ 0.606102] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PBR6._PRT] [ 0.606200] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PBR7._PRT] [ 0.606299] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PIBR._PRT] [ 0.608224] ACPI: PCI Interrupt Link [INTA] (IRQs 3 4 5 7 10 11 12 15) *0, disabled. [ 0.608296] ACPI: PCI Interrupt Link [INTB] (IRQs 3 4 5 7 10 11 12 15) *0, disabled. [ 0.608420] ACPI: PCI Interrupt Link [INTC] (IRQs 3 4 5 7 10 11 12 15) *0, disabled. [ 0.612164] ACPI: PCI Interrupt Link [INTD] (IRQs 3 4 5 7 10 11 12 15) *0, disabled. [ 0.612288] ACPI: PCI Interrupt Link [INTE] (IRQs 3 4 5 7 10 11 12 15) *0, disabled. [ 0.612412] ACPI: PCI Interrupt Link [INTF] (IRQs 9) *0, disabled. [ 0.612533] ACPI: PCI Interrupt Link [INTG] (IRQs 3 4 5 7 10 11 12 15) *0, disabled. [ 0.612656] ACPI: PCI Interrupt Link [INTH] (IRQs 3 4 5 7 10 11 12 15) *0, disabled. [ 0.612738] ACPI: Power Resource [PFN0] (on) [ 0.612738] Linux Plug and Play Support v0.97 (c) Adam Belay [ 0.612738] pnp: PnP ACPI init [ 0.612738] ACPI: bus type pnp registered [ 0.612738] pnp: PnP ACPI: found 6 devices [ 0.612738] ACPI: ACPI bus type pnp unregistered [ 0.612738] PCI: Using ACPI for IRQ routing [ 0.612738] pci 0000:00:00.0: BAR 3: can't allocate resource [ 0.644040] NET: Registered protocol family 8 [ 0.644042] NET: Registered protocol family 20 [ 0.644060] NetLabel: Initializing [ 0.644062] NetLabel: domain hash size = 128 [ 0.644064] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.644079] NetLabel: unlabeled traffic allowed by default [ 0.644162] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0 [ 0.644167] hpet0: 4 32-bit timers, 14318180 Hz [ 0.646408] tracer: 1286 pages allocated for 65536 entries of 80 bytes [ 0.646410] actual entries 65586 [ 0.646541] AppArmor: AppArmor Filesystem Enabled [ 0.646566] ACPI: RTC can wake from S4 [ 0.648046] Switched to high resolution mode on CPU 0 [ 0.648208] Switched to high resolution mode on CPU 1 [ 0.661529] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01 [ 0.661532] pci 0000:00:01.0: IO window: 0x1000-0x1fff [ 0.661536] pci 0000:00:01.0: MEM window: 0xfc000000-0xfc1fffff [ 0.661539] pci 0000:00:01.0: PREFETCH window: 0x000000f0000000-0x000000f7ffffff [ 0.661543] pci 0000:00:04.0: PCI bridge, secondary bus 0000:02 [ 0.661545] pci 0000:00:04.0: IO window: disabled [ 0.661547] pci 0000:00:04.0: MEM window: disabled [ 0.661549] pci 0000:00:04.0: PREFETCH window: disabled [ 0.661553] pci 0000:00:05.0: PCI bridge, secondary bus 0000:03 [ 0.661554] pci 0000:00:05.0: IO window: disabled [ 0.661557] pci 0000:00:05.0: MEM window: disabled [ 0.661559] pci 0000:00:05.0: PREFETCH window: disabled [ 0.661563] pci 0000:00:06.0: PCI bridge, secondary bus 0000:04 [ 0.661564] pci 0000:00:06.0: IO window: disabled [ 0.661567] pci 0000:00:06.0: MEM window: disabled [ 0.661569] pci 0000:00:06.0: PREFETCH window: disabled [ 0.661572] pci 0000:00:07.0: PCI bridge, secondary bus 0000:05 [ 0.661574] pci 0000:00:07.0: IO window: disabled [ 0.661577] pci 0000:00:07.0: MEM window: 0xfc200000-0xfc2fffff [ 0.661579] pci 0000:00:07.0: PREFETCH window: disabled [ 0.661583] pci 0000:00:14.4: PCI bridge, secondary bus 0000:06 [ 0.661590] pci 0000:00:14.4: IO window: 0x2000-0x2fff [ 0.661595] pci 0000:00:14.4: MEM window: 0xfc300000-0xfc3fffff [ 0.661600] pci 0000:00:14.4: PREFETCH window: 0x00000050000000-0x000000500fffff [ 0.661616] pci 0000:00:04.0: setting latency timer to 64 [ 0.661621] pci 0000:00:05.0: setting latency timer to 64 [ 0.661626] pci 0000:00:06.0: setting latency timer to 64 [ 0.661631] pci 0000:00:07.0: setting latency timer to 64 [ 0.661639] bus: 00 index 0 io port: [0, ffff] [ 0.661641] bus: 00 index 1 mmio: [0, ffffffffffffffff] [ 0.661643] bus: 01 index 0 io port: [1000, 1fff] [ 0.661645] bus: 01 index 1 mmio: [fc000000, fc1fffff] [ 0.661647] bus: 01 index 2 mmio: [f0000000, f7ffffff] [ 0.661649] bus: 01 index 3 mmio: [0, 0] [ 0.661650] bus: 02 index 0 mmio: [0, 0] [ 0.661652] bus: 02 index 1 mmio: [0, 0] [ 0.661653] bus: 02 index 2 mmio: [0, 0] [ 0.661655] bus: 02 index 3 mmio: [0, 0] [ 0.661657] bus: 03 index 0 mmio: [0, 0] [ 0.661658] bus: 03 index 1 mmio: [0, 0] [ 0.661660] bus: 03 index 2 mmio: [0, 0] [ 0.661662] bus: 03 index 3 mmio: [0, 0] [ 0.661663] bus: 04 index 0 mmio: [0, 0] [ 0.661665] bus: 04 index 1 mmio: [0, 0] [ 0.661667] bus: 04 index 2 mmio: [0, 0] [ 0.661668] bus: 04 index 3 mmio: [0, 0] [ 0.661670] bus: 05 index 0 mmio: [0, 0] [ 0.661672] bus: 05 index 1 mmio: [fc200000, fc2fffff] [ 0.661673] bus: 05 index 2 mmio: [0, 0] [ 0.661675] bus: 05 index 3 mmio: [0, 0] [ 0.661677] bus: 06 index 0 io port: [2000, 2fff] [ 0.661679] bus: 06 index 1 mmio: [fc300000, fc3fffff] [ 0.661681] bus: 06 index 2 mmio: [50000000, 500fffff] [ 0.661682] bus: 06 index 3 io port: [0, ffff] [ 0.661684] bus: 06 index 4 mmio: [0, ffffffffffffffff] [ 0.661698] NET: Registered protocol family 2 [ 0.700099] IP route cache hash table entries: 32768 (order: 6, 262144 bytes) [ 0.700649] TCP established hash table entries: 131072 (order: 9, 2097152 bytes) [ 0.701913] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 0.702484] TCP: Hash tables configured (established 131072 bind 65536) [ 0.702487] TCP reno registered [ 0.712109] NET: Registered protocol family 1 [ 0.712227] checking if image is initramfs... it is [ 1.401573] Freeing initrd memory: 8408k freed [ 1.407647] audit: initializing netlink socket (disabled) [ 1.407661] type=2000 audit(4078832714.404:1): initialized [ 1.413262] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 1.416276] VFS: Disk quotas dquot_6.5.1 [ 1.416375] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 1.416488] msgmni has been set to 1749 [ 1.416625] io scheduler noop registered [ 1.416627] io scheduler anticipatory registered [ 1.416629] io scheduler deadline registered [ 1.416768] io scheduler cfq registered (default) [ 1.416872] pci 0000:01:05.0: Boot video device [ 1.417009] pcieport-driver 0000:00:04.0: setting latency timer to 64 [ 1.417028] pcieport-driver 0000:00:04.0: found MSI capability [ 1.417052] pci_express 0000:00:04.0:pcie00: allocate port service [ 1.417141] pcieport-driver 0000:00:05.0: setting latency timer to 64 [ 1.417159] pcieport-driver 0000:00:05.0: found MSI capability [ 1.417178] pci_express 0000:00:05.0:pcie00: allocate port service [ 1.417256] pcieport-driver 0000:00:06.0: setting latency timer to 64 [ 1.417274] pcieport-driver 0000:00:06.0: found MSI capability [ 1.417293] pci_express 0000:00:06.0:pcie00: allocate port service [ 1.417372] pcieport-driver 0000:00:07.0: setting latency timer to 64 [ 1.417389] pcieport-driver 0000:00:07.0: found MSI capability [ 1.417408] pci_express 0000:00:07.0:pcie00: allocate port service [ 1.465227] hpet_resources: 0xfed00000 is busy [ 1.465304] Linux agpgart interface v0.103 [ 1.465309] Serial: 8250/16550 driver4 ports, IRQ sharing enabled [ 1.465492] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 1.468144] brd: module loaded [ 1.468238] input: Macintosh mouse button emulation as /devices/virtual/input/input0 [ 1.468455] PNP: No PS/2 controller found. Probing ports directly. [ 1.470562] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 1.470571] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 1.493199] mice: PS/2 mouse device common for all mice [ 1.493378] rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0 [ 1.493406] rtc0: alarms up to one day, hpet irqs [ 1.493463] cpuidle: using governor ladder [ 1.493465] cpuidle: using governor menu [ 1.493849] TCP cubic registered [ 1.494135] registered taskstats version 1 [ 1.494293] Magic number: 15:457:86 [ 1.494449] rtc_cmos 00:01: setting system clock to 1999-04-02 17:05:15 UTC (923072715) [ 1.494452] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 1.494454] EDD information not available. [ 1.494490] Freeing unused kernel memory: 536k freed [ 1.494752] Write protecting the kernel read-only data: 4348k [ 1.534507] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1 [ 1.651115] fuse init (API version 7.9) [ 1.726324] fan PNP0C0B:00: registered as cooling_device0 [ 1.726336] ACPI: Fan [FAN0] (on) [ 1.757387] processor ACPI0007:00: registered as cooling_device1 [ 1.757394] ACPI: Processor [CPU0] (supports 8 throttling states) [ 1.757506] processor ACPI0007:01: registered as cooling_device2 [ 1.768499] thermal LNXTHERM:01: registered as thermal_zone0 [ 1.792218] ACPI: Thermal Zone [TZ00] (40 C) [ 2.020104] usbcore: registered new interface driver usbfs [ 2.020132] usbcore: registered new interface driver hub [ 2.030788] usbcore: registered new device driver usb [ 2.040438] ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver [ 2.040479] ohci_hcd 0000:00:13.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 2.040496] ohci_hcd 0000:00:13.0: OHCI Host Controller [ 2.040549] ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 1 [ 2.040581] ohci_hcd 0000:00:13.0: irq 16, io mem 0xfc404000 [ 2.068135] No dock devices found. [ 2.084733] SCSI subsystem initialized [ 2.101187] usb usb1: configuration #1 chosen from 1 choice [ 2.101217] hub 1-0:1.0: USB hub found [ 2.101232] hub 1-0:1.0: 2 ports detected [ 2.108896] libata version 3.00 loaded. [ 2.131215] 8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004) [ 2.205347] ohci_hcd 0000:00:13.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 2.205368] ohci_hcd 0000:00:13.1: OHCI Host Controller [ 2.205416] ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 2 [ 2.205449] ohci_hcd 0000:00:13.1: irq 17, io mem 0xfc405000 [ 2.264270] usb usb2: configuration #1 chosen from 1 choice [ 2.264300] hub 2-0:1.0: USB hub found [ 2.264314] hub 2-0:1.0: 2 ports detected [ 2.368338] ohci_hcd 0000:00:13.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 2.368358] ohci_hcd 0000:00:13.2: OHCI Host Controller [ 2.368387] ohci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 3 [ 2.368415] ohci_hcd 0000:00:13.2: irq 18, io mem 0xfc406000 [ 2.428182] usb usb3: configuration #1 chosen from 1 choice [ 2.428214] hub 3-0:1.0: USB hub found [ 2.428229] hub 3-0:1.0: 2 ports detected [ 2.532354] ohci_hcd 0000:00:13.3: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 2.532374] ohci_hcd 0000:00:13.3: OHCI Host Controller [ 2.532402] ohci_hcd 0000:00:13.3: new USB bus registered, assigned bus number 4 [ 2.532421] ohci_hcd 0000:00:13.3: irq 17, io mem 0xfc407000 [ 2.592184] usb usb4: configuration #1 chosen from 1 choice [ 2.592214] hub 4-0:1.0: USB hub found [ 2.592229] hub 4-0:1.0: 2 ports detected [ 2.696316] ohci_hcd 0000:00:13.4: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 2.696336] ohci_hcd 0000:00:13.4: OHCI Host Controller [ 2.696366] ohci_hcd 0000:00:13.4: new USB bus registered, assigned bus number 5 [ 2.696384] ohci_hcd 0000:00:13.4: irq 18, io mem 0xfc408000 [ 2.756155] usb usb5: configuration #1 chosen from 1 choice [ 2.756185] hub 5-0:1.0: USB hub found [ 2.756199] hub 5-0:1.0: 2 ports detected [ 2.860359] ahci 0000:00:12.0: version 3.0 [ 2.860379] ahci 0000:00:12.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22 [ 2.860405] ahci 0000:00:12.0: controller can't do 64bit DMA, forcing 32bit [ 2.860494] ahci 0000:00:12.0: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl SATA mode [ 2.860497] ahci 0000:00:12.0: flags: ncq sntf ilck pm led clo pmp pio slum part [ 2.861923] scsi0 : ahci [ 2.863043] scsi1 : ahci [ 2.864153] scsi2 : ahci [ 2.865252] scsi3 : ahci [ 2.865369] ata1: SATA max UDMA/133 abar m1024@0xfc409000 port 0xfc409100 irq 22 [ 2.865373] ata2: SATA max UDMA/133 abar m1024@0xfc409000 port 0xfc409180 irq 22 [ 2.865376] ata3: SATA max UDMA/133 abar m1024@0xfc409000 port 0xfc409200 irq 22 [ 2.865380] ata4: SATA max UDMA/133 abar m1024@0xfc409000 port 0xfc409280 irq 22 [ 3.184039] ata1: SATA link down (SStatus 0 SControl 300) [ 3.684021] ata2: softreset failed (device not ready) [ 3.684026] ata2: failed due to HW bug, retry pmp=0 [ 3.848034] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 3.892141] ata2.00: ATA-7: ST3250620NS, 3.AEG, max UDMA/133 [ 3.892144] ata2.00: 488397168 sectors, multi 0: LBA48 NCQ (depth 31/32) [ 3.892152] ata2.00: SB600 AHCI: limiting to 255 sectors per cmd [ 3.950449] ata2.00: SB600 AHCI: limiting to 255 sectors per cmd [ 3.950452] ata2.00: configured for UDMA/133 [ 4.284035] ata3: SATA link down (SStatus 0 SControl 300) [ 4.620037] ata4: SATA link down (SStatus 0 SControl 300) [ 4.636065] isa bounce pool size: 16 pages [ 4.636153] scsi 1:0:0:0: Direct-Access ATA ST3250620NS 3.AE PQ: 0 ANSI: 5 [ 4.636530] ehci_hcd 0000:00:13.5: PCI INT D -> GSI 19 (level, low) -> IRQ 19 [ 4.636549] ehci_hcd 0000:00:13.5: EHCI Host Controller [ 4.636590] ehci_hcd 0000:00:13.5: new USB bus registered, assigned bus number 6 [ 4.636637] ehci_hcd 0000:00:13.5: debug port 1 [ 4.636661] ehci_hcd 0000:00:13.5: irq 19, io mem 0xfc40a000 [ 4.652020] ehci_hcd 0000:00:13.5: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 [ 4.652181] usb usb6: configuration #1 chosen from 1 choice [ 4.652215] hub 6-0:1.0: USB hub found [ 4.652224] hub 6-0:1.0: 10 ports detected [ 4.756236] tg3.c:v3.94 (August 14, 2008) [ 4.756253] tg3 0000:05:00.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19 [ 4.756263] tg3 0000:05:00.0: setting latency timer to 64 [ 5.573013] tg3: Could not obtain valid ethernet address, aborting. [ 5.573043] tg3 0000:05:00.0: PCI INT A disabled [ 5.573056] tg3: probe of 0000:05:00.0 failed with error -22 [ 5.573916] 8139cp 0000:06:05.0: This (id 10ec:8139 rev 10) is not an 8139C+ compatible chip [ 5.573921] 8139cp 0000:06:05.0: Try the "8139too" driver instead. [ 5.576581] 8139too Fast Ethernet driver 0.9.28 [ 5.576638] 8139too 0000:06:05.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20 [ 5.577692] eth0: RealTek RTL8139 at 0x2000, 00:e0:4c:f4:21:28, IRQ 20 [ 5.577694] eth0: Identified 8139 chip type 'RTL-8100B/8139D' [ 5.582375] pata_acpi 0000:00:14.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 5.589729] scsi4 : pata_atiixp [ 5.589868] scsi5 : pata_atiixp [ 5.590466] ata5: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x3010 irq 14 [ 5.590469] ata6: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x3018 irq 15 [ 5.590869] scsi 1:0:0:0: Attached scsi generic sg0 type 0 [ 5.612050] Driver 'sd' needs updating - please use bus_type methods [ 5.612186] sd 1:0:0:0: [sda] 488397168 512-byte hardware sectors (250059 MB) [ 5.612207] sd 1:0:0:0: [sda] Write Protect is off [ 5.612210] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 5.612243] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 5.612329] sd 1:0:0:0: [sda] 488397168 512-byte hardware sectors (250059 MB) [ 5.612346] sd 1:0:0:0: [sda] Write Protect is off [ 5.612349] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 5.612381] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 5.612385] sda: sda1 sda2 < sda5 > [ 5.645320] sd 1:0:0:0: [sda] Attached SCSI disk [ 6.140351] PM: Starting manual resume from disk [ 6.140355] PM: Resume from partition 8:5 [ 6.140357] PM: Checking hibernation image. [ 6.140629] PM: Resume from disk failed. [ 10.295792] udevd version 124 started [ 10.554972] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 10.590869] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 10.628403] input: Power Button (FF) as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2 [ 10.657060] ACPI: Power Button (FF) [PWRF] [ 10.657187] input: Power Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input3 [ 10.689100] ACPI: Power Button (CM) [PWRB] [ 11.390049] ACPI: I/O resource piix4_smbus [0xb00-0xb07] conflicts with ACPI region SMB0 [0xb00-0xb0b] [ 11.390053] ACPI: Device needs an ACPI driver [ 11.390060] piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0 [ 11.598076] HDA Intel 0000:00:14.2: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 11.630918] hda_codec: Unknown model for ALC882, trying auto-probe from BIOS... [ 11.666800] HDA Intel 0000:01:05.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19 [ 11.676573] input: PC Speaker as /devices/platform/pcspkr/input/input4 [ 12.313373] input: ImExPS/2 Generic Explorer Mouse as /devices/platform/i8042/serio1/input/input5 [ 13.373953] lp: driver loaded but no devices found [ 13.600599] Adding 995988k swap on /dev/sda5. Priority:-1 extents:1 across:995988k [ 15.154441] type=1505 audit(923072728.985:2): operation="profile_load" name="/usr/share/gdm/guest-session/Xsession" name2="default" pid=4185 [ 15.317911] type=1505 audit(923072729.149:3): operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" name2="default" pid=4190 [ 15.318138] type=1505 audit(923072729.149:4): operation="profile_load" name="/usr/sbin/cupsd" name2="default" pid=4190 [ 15.454942] ip_tables: (C) 2000-2006 Netfilter Core Team [ 16.100079] ACPI: WMI: Mapper loaded [ 16.319769] powernow-k8: Found 1 AMD Turion(tm) 64 X2 Mobile Technology TL-62 processors (2 cpu cores) (version 2.20.00) [ 16.319844] powernow-k8: 0 : fid 0xd (2100 MHz), vid 0x11 [ 16.319848] powernow-k8: 1 : fid 0xc (2000 MHz), vid 0x12 [ 16.319850] powernow-k8: 2 : fid 0xa (1800 MHz), vid 0x13 [ 16.319852] powernow-k8: 3 : fid 0x8 (1600 MHz), vid 0x14 [ 16.319854] powernow-k8: 4 : fid 0x0 (800 MHz), vid 0x1e [ 16.319906] powernow-k8: ph2 null fid transition 0xd [ 16.898551] warning: `avahi-daemon' uses 32-bit capabilities (legacy support in use) [ 17.047682] ppdev: user-space parallel port driver [ 17.935494] Bluetooth: Core ver 2.13 [ 17.935801] NET: Registered protocol family 31 [ 17.935803] Bluetooth: HCI device and connection manager initialized [ 17.935807] Bluetooth: HCI socket layer initialized [ 17.947814] Bluetooth: L2CAP ver 2.11 [ 17.947822] Bluetooth: L2CAP socket layer initialized [ 17.956311] Bluetooth: SCO (Voice Link) ver 0.6 [ 17.956318] Bluetooth: SCO socket layer initialized [ 17.974040] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 17.974048] Bluetooth: BNEP filters: protocol multicast [ 17.994847] Bridge firewalling registered [ 17.995073] pan0: Dropping NETIF_F_UFO since no NETIF_F_HW_CSUM feature. [ 18.354823] Bluetooth: RFCOMM socket layer initialized [ 18.354849] Bluetooth: RFCOMM TTY layer initialized [ 18.354852] Bluetooth: RFCOMM ver 1.10 [ 19.000029] Clocksource tsc unstable (delta = -118094000 ns) [ 19.949595] pci 0000:01:05.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [ 20.284830] [drm] Initialized drm 1.1.0 20060810 [ 20.310887] [drm] Initialized radeon 1.29.0 20080528 on minor 0 [ 20.703736] [drm] Setting GART location based on new memory map [ 20.704404] [drm] Loading RS690 Microcode [ 20.704436] [drm] Num pipes: 1 [ 20.704447] [drm] writeback test succeeded in 1 usecs [ 22.464976] eth0: link up, 100Mbps, full-duplex, lpa 0x45E1 [ 22.681077] NET: Registered protocol family 17 [ 24.808074] hda-intel: Invalid position buffer, using LPIB read method instead. [ 113.131797] type=1503 audit(923072826.960:5): operation="inode_permission" requested_mask="r::" denied_mask="r::" fsuid=7 name="/proc/5746/net/" pid=5746 profile="/usr/sbin/cupsd" [ 114.343022] type=1503 audit(923072828.173:6): operation="inode_permission" requested_mask="r::" denied_mask="r::" fsuid=7 name="/proc/5750/net/" pid=5750 profile="/usr/sbin/cupsd" [ 114.443419] NET: Registered protocol family 10 [ 114.444718] lo: Disabled Privacy Extensions [ 114.447645] type=1503 audit(923072828.276:7): operation="socket_create" family="ax25" sock_type="dgram" protocol=0 pid=5750 profile="/usr/sbin/cupsd" [ 114.447684] type=1503 audit(923072828.276:8): operation="socket_create" family="netrom" sock_type="seqpacket" protocol=0 pid=5750 profile="/usr/sbin/cupsd" [ 114.447702] type=1503 audit(923072828.276:9): operation="socket_create" family="rose" sock_type="dgram" protocol=0 pid=5750 profile="/usr/sbin/cupsd" [ 114.447717] type=1503 audit(923072828.276:10): operation="socket_create" family="ipx" sock_type="dgram" protocol=0 pid=5750 profile="/usr/sbin/cupsd" [ 114.447731] type=1503 audit(923072828.276:11): operation="socket_create" family="appletalk" sock_type="dgram" protocol=0 pid=5750 profile="/usr/sbin/cupsd" [ 114.447746] type=1503 audit(923072828.276:12): operation="socket_create" family="econet" sock_type="dgram" protocol=0 pid=5750 profile="/usr/sbin/cupsd" [ 114.447763] type=1503 audit(923072828.276:13): operation="socket_create" family="ash" sock_type="dgram" protocol=0 pid=5750 profile="/usr/sbin/cupsd" [ 114.447777] type=1503 audit(923072828.276:14): operation="socket_create" family="x25" sock_type="seqpacket" protocol=0 pid=5750 profile="/usr/sbin/cupsd" [ 124.696034] eth0: no IPv6 routers present