[ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 2.6.27-7-generic (buildd@yellow) (gcc version 4.3.2 (Ubuntu 4.3.2-1ubuntu10) ) #1 SMP Fri Oct 24 06:40:41 UTC 2008 (Ubuntu 2.6.27-7.14-generic) [ 0.000000] Command line: root=UUID=0d3b5a6f-40ed-46b8-8243-5a8bb9197fa3 ro quiet splash mminit_loglevel=4 acpi.debug_level=0x10807 [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] Centaur CentaurHauls [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) [ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 0000000037ff0000 (usable) [ 0.000000] BIOS-e820: 0000000037ff0000 - 0000000040000000 (reserved) [ 0.000000] last_pfn = 0x37ff0 max_arch_pfn = 0x3ffffffff [ 0.000000] init_memory_mapping [ 0.000000] 0000000000 - 0037e00000 page 2M [ 0.000000] 0037e00000 - 0037ff0000 page 4k [ 0.000000] kernel direct mapping tables up to 37ff0000 @ 8000-b000 [ 0.000000] last_map_addr: 37ff0000 end: 37ff0000 [ 0.000000] RAMDISK: 377a9000 - 37fdf279 [ 0.000000] DMI 2.4 present. [ 0.000000] ACPI: RSDP 000F9CB0, 0014 (r0 CORE ) [ 0.000000] ACPI: RSDT 37FF0424, 0034 (r1 CORE RSDT 0 CORE 0) [ 0.000000] ACPI: HPET 37FF046C, 0038 (r1 CORE AMD64 0 CORE 0) [ 0.000000] ACPI: APIC 37FF04A4, 005C (r1 CORE MADT 0 CORE 0) [ 0.000000] ACPI: SSDT 37FF0500, 037A (r2 CORE DYNADATA 2A GENA 2A) [ 0.000000] ACPI: FACP 37FF2ED1, 00F4 (r1 CORE COREBOOT 0 CORE 0) [ 0.000000] ACPI: DSDT 37FF08BA, 2617 (r2 AMD DBM690T 10001 INTL 20061109) [ 0.000000] ACPI: FACS 37FF087A, 0040 [ 0.000000] Scanning NUMA topology in Northbridge 24 [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at 0000000000000000-0000000037ff0000 [ 0.000000] mminit::memory_register Entering add_active_range(0, 0x0, 0x9f) 0 entries of 3200 used [ 0.000000] mminit::memory_register Entering add_active_range(0, 0x100, 0x37ff0) 1 entries of 3200 used [ 0.000000] Bootmem setup node 0 0000000000000000-0000000037ff0000 [ 0.000000] NODE_DATA [0000000000001000 - 0000000000005fff] [ 0.000000] bootmap [0000000000009000 - 000000000000ffff] pages 7 [ 0.000000] (6 early reservations) ==> bootmem [0000000000 - 0037ff0000] [ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] [ 0.000000] #1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000] [ 0.000000] #2 [0000200000 - 00008b8f9c] TEXT DATA BSS ==> [0000200000 - 00008b8f9c] [ 0.000000] #3 [00377a9000 - 0037fdf279] RAMDISK ==> [00377a9000 - 0037fdf279] [ 0.000000] #4 [000009fc00 - 0000100000] BIOS reserved ==> [000009fc00 - 0000100000] [ 0.000000] #5 [0000008000 - 0000009000] PGTABLE ==> [0000008000 - 0000009000] [ 0.000000] [ffffe20000000000-ffffe20000dfffff] PMD -> [ffff880001200000-ffff880001ffffff] on node 0 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000000 -> 0x00001000 [ 0.000000] DMA32 0x00001000 -> 0x00100000 [ 0.000000] Normal 0x00100000 -> 0x00100000 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[2] active PFN ranges [ 0.000000] 0: 0x00000000 -> 0x0000009f [ 0.000000] 0: 0x00000100 -> 0x00037ff0 [ 0.000000] mminit::pageflags_layout_widths Section 0 Node 6 Zone 2 Flags 19 [ 0.000000] mminit::pageflags_layout_shifts Section 17 Node 6 Zone 2 [ 0.000000] mminit::pageflags_layout_offsets Section 0 Node 58 Zone 56 [ 0.000000] mminit::pageflags_layout_zoneid Zone ID: 56 -> 64 [ 0.000000] mminit::pageflags_layout_usage location: 64 -> 56 unused 56 -> 19 flags 19 -> 0 [ 0.000000] On node 0 totalpages: 229263 [ 0.000000] mminit::memmap_init DMA zone: 64 pages used for memmap [ 0.000000] mminit::memmap_init DMA zone: 1820 pages reserved [ 0.000000] DMA zone: 2115 pages, LIFO batch:0 [ 0.000000] mminit::memmap_init Initialising map node 0 zone 0 pfns 0 -> 4096 [ 0.000000] mminit::memmap_init DMA32 zone: 3520 pages used for memmap [ 0.000000] DMA32 zone: 221744 pages, LIFO batch:31 [ 0.000000] mminit::memmap_init Initialising map node 0 zone 1 pfns 4096 -> 229360 [ 0.000000] mminit::memmap_init Normal zone: 0 pages used for memmap [ 0.000000] mminit::memmap_init Movable zone: 0 pages used for memmap [ 0.000000] ACPI: PM-Timer IO Port: 0x818 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 2, version 0, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Setting APIC routing to flat [ 0.000000] ACPI: HPET id: 0x102282a0 base: 0xfed00000 [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000 [ 0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000 [ 0.000000] Allocating PCI resources starting at 50000000 (gap: 40000000:c0000000) [ 0.000000] PERCPU: Allocating 64928 bytes of per cpu data [ 0.000000] NR_CPUS: 64, nr_cpu_ids: 2, nr_node_ids 1 [ 0.000000] mminit::zonelist general 0:DMA = 0:DMA [ 0.000000] mminit::zonelist general 0:DMA32 = 0:DMA32 0:DMA [ 0.000000] mminit::zonelist thisnode 0:DMA = 0:DMA [ 0.000000] mminit::zonelist thisnode 0:DMA32 = 0:DMA32 0:DMA [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 223859 [ 0.000000] Policy zone: DMA32 [ 0.000000] Kernel command line: root=UUID=0d3b5a6f-40ed-46b8-8243-5a8bb9197fa3 ro quiet splash mminit_loglevel=4 acpi.debug_level=0x10807 [ 0.000000] Unknown boot option `acpi.debug_level=0x10807': ignoring [ 0.000000] Initializing CPU#0 [ 0.000000] PID hash table entries: 4096 (order: 12, 32768 bytes) [ 0.000000] TSC: PIT calibration confirmed by PMTIMER. [ 0.000000] TSC: using PIT calibration value [ 0.000000] Detected 2100.052 MHz processor. [ 0.004000] Console: colour VGA+ 80x25 [ 0.004000] console [tty0] enabled [ 0.004000] Checking aperture... [ 0.004000] No AGP bridge found [ 0.004000] Node 0: aperture @ f8000000 size 64 MB [ 0.004000] Memory: 887148k/917440k available (3112k kernel code, 29904k reserved, 1575k data, 536k init) [ 0.004000] CPA: page pool initialized 1 of 1 pages preallocated [ 0.004000] SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 [ 0.004000] hpet clockevent registered [ 0.004009] Calibrating delay loop (skipped), value calculated using timer frequency.. 4200.10 BogoMIPS (lpj=8400208) [ 0.004033] Security Framework initialized [ 0.004040] SELinux: Disabled at boot. [ 0.004053] AppArmor: AppArmor initialized [ 0.004156] Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.004861] Inode-cache hash table entries: 65536 (order: 7, 524288 bytes) [ 0.005151] Mount-cache hash table entries: 256 [ 0.005325] Initializing cgroup subsys ns [ 0.005329] Initializing cgroup subsys cpuacct [ 0.005331] Initializing cgroup subsys memory [ 0.005347] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) [ 0.005349] CPU: L2 Cache: 512K (64 bytes/line) [ 0.005351] CPU 0/0 -> Node 0 [ 0.005353] tseg: 0000000000 [ 0.005366] CPU: Physical Processor ID: 0 [ 0.005367] CPU: Processor Core ID: 0 [ 0.005376] using C1E aware idle routine [ 0.006760] ACPI: Core revision 20080609 [ 0.007543] ACPI: Checking initramfs for custom DSDT [ 0.338961] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.378658] CPU0: AMD Turion(tm) 64 X2 Mobile Technology TL-62 stepping 02 [ 0.378662] Using local APIC timer interrupts. [ 0.380025] APIC timer calibration result 12500334 [ 0.380027] Detected 12.500 MHz APIC timer. [ 0.380185] Booting processor 1/1 ip 6000 [ 0.004000] Initializing CPU#1 [ 0.004000] Calibrating delay using timer specific routine.. 4200.19 BogoMIPS (lpj=8400382) [ 0.004000] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) [ 0.004000] CPU: L2 Cache: 512K (64 bytes/line) [ 0.004000] CPU 1/1 -> Node 0 [ 0.004000] CPU: Physical Processor ID: 0 [ 0.004000] CPU: Processor Core ID: 1 [ 0.468244] CPU1: AMD Turion(tm) 64 X2 Mobile Technology TL-62 stepping 02 [ 0.468260] Brought up 2 CPUs [ 0.468263] Total of 2 processors activated (8400.29 BogoMIPS). [ 0.468306] CPU0 attaching sched-domain: [ 0.468309] domain 0: span 0-1 level CPU [ 0.468311] groups: 0 1 [ 0.468315] domain 1: span 0-1 level NODE [ 0.468317] groups: 0-1 [ 0.468322] CPU1 attaching sched-domain: [ 0.468323] domain 0: span 0-1 level CPU [ 0.468325] groups: 1 0 [ 0.468328] domain 1: span 0-1 level NODE [ 0.468330] groups: 0-1 [ 0.468415] net_namespace: 1552 bytes [ 0.468415] Booting paravirtualized kernel on bare hardware [ 0.468415] Time: 17:27:07 Date: 04/03/99 [ 0.468415] NET: Registered protocol family 16 [ 0.468415] node 0 link 0: io port [1000, 3fff] [ 0.468415] TOM: 0000000040000000 aka 1024M [ 0.468415] node 0 link 0: mmio [a0000, bffff] [ 0.468415] node 0 link 0: mmio [fc000000, fc3fffff] [ 0.468415] node 0 link 0: mmio [f0000000, f7ffffff] [ 0.468415] TOM2: 0000000000000000 aka 0M [ 0.468415] bus: [00,06] on node 0 link 0 [ 0.468415] bus: 00 index 0 io port: [0, ffff] [ 0.468415] bus: 00 index 1 mmio: [a0000, bffff] [ 0.468415] bus: 00 index 2 mmio: [f8000000, ffffffff] [ 0.468415] bus: 00 index 3 mmio: [40000000, f7ffffff] [ 0.468415] ACPI: bus type pci registered [ 0.468415] PCI: Using configuration type 1 for base access [ 0.468472] ACPI: EC: Look up EC in DSDT [ 0.600374] ACPI: Interpreter enabled [ 0.600376] ACPI: (supports S0 S1 S2 S3 S4 S5) [ 0.600396] ACPI: Using IOAPIC for interrupt routing [ 0.604074] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 0.604106] PCI: 0000:00:00.0 reg 1c 64bit mmio: [e0000000, ffffffff] [ 0.604121] pci 0000:00:04.0: PME# supported from D0 D3hot D3cold [ 0.604124] pci 0000:00:04.0: PME# disabled [ 0.604146] pci 0000:00:05.0: PME# supported from D0 D3hot D3cold [ 0.604149] pci 0000:00:05.0: PME# disabled [ 0.604171] pci 0000:00:06.0: PME# supported from D0 D3hot D3cold [ 0.604174] pci 0000:00:06.0: PME# disabled [ 0.604196] pci 0000:00:07.0: PME# supported from D0 D3hot D3cold [ 0.604198] pci 0000:00:07.0: PME# disabled [ 0.604244] PCI: 0000:00:12.0 reg 10 io port: [3020, 3027] [ 0.604251] PCI: 0000:00:12.0 reg 14 io port: [3060, 3063] [ 0.604258] PCI: 0000:00:12.0 reg 18 io port: [3030, 3037] [ 0.604265] PCI: 0000:00:12.0 reg 1c io port: [3070, 3073] [ 0.604272] PCI: 0000:00:12.0 reg 20 io port: [3000, 300f] [ 0.604279] PCI: 0000:00:12.0 reg 24 32bit mmio: [fc309000, fc3093ff] [ 0.604303] pci 0000:00:12.0: set SATA to AHCI mode [ 0.604327] PCI: 0000:00:13.0 reg 10 32bit mmio: [fc304000, fc304fff] [ 0.604382] PCI: 0000:00:13.1 reg 10 32bit mmio: [fc305000, fc305fff] [ 0.604437] PCI: 0000:00:13.2 reg 10 32bit mmio: [fc306000, fc306fff] [ 0.604491] PCI: 0000:00:13.3 reg 10 32bit mmio: [fc307000, fc307fff] [ 0.604546] PCI: 0000:00:13.4 reg 10 32bit mmio: [fc308000, fc308fff] [ 0.604619] PCI: 0000:00:13.5 reg 10 32bit mmio: [fc30a000, fc30a0ff] [ 0.604667] pci 0000:00:13.5: supports D1 [ 0.604668] pci 0000:00:13.5: supports D2 [ 0.604670] pci 0000:00:13.5: PME# supported from D0 D1 D2 D3hot [ 0.604674] pci 0000:00:13.5: PME# disabled [ 0.604705] PCI: 0000:00:14.0 reg 10 io port: [b00, b0f] [ 0.604712] PCI: 0000:00:14.0 reg 14 32bit mmio: [fed00000, fed003ff] [ 0.604767] PCI: 0000:00:14.1 reg 10 io port: [3040, 3047] [ 0.604774] PCI: 0000:00:14.1 reg 14 io port: [3080, 3083] [ 0.604781] PCI: 0000:00:14.1 reg 18 io port: [3050, 3057] [ 0.604788] PCI: 0000:00:14.1 reg 1c io port: [3090, 3093] [ 0.604795] PCI: 0000:00:14.1 reg 20 io port: [3010, 301f] [ 0.604847] PCI: 0000:00:14.2 reg 10 64bit mmio: [fc300000, fc303fff] [ 0.604887] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold [ 0.604892] pci 0000:00:14.2: PME# disabled [ 0.605069] PCI: 0000:01:05.0 reg 10 32bit mmio: [f0000000, f7ffffff] [ 0.605076] PCI: 0000:01:05.0 reg 18 64bit mmio: [fc100000, fc10ffff] [ 0.605080] PCI: 0000:01:05.0 reg 20 io port: [1000, 10ff] [ 0.605084] PCI: 0000:01:05.0 reg 24 32bit mmio: [fc000000, fc0fffff] [ 0.605093] pci 0000:01:05.0: supports D1 [ 0.605094] pci 0000:01:05.0: supports D2 [ 0.605111] PCI: 0000:01:05.2 reg 10 64bit mmio: [fc110000, fc113fff] [ 0.605143] PCI: bridge 0000:00:01.0 io port: [1000, 1fff] [ 0.605145] PCI: bridge 0000:00:01.0 32bit mmio: [fc000000, fc1fffff] [ 0.605149] PCI: bridge 0000:00:01.0 64bit mmio pref: [f0000000, f7ffffff] [ 0.605341] PCI: 0000:05:00.0 reg 10 64bit mmio: [79ff7ff6d4090000, 79ff7ff6d409ffff] [ 0.605381] pci 0000:05:00.0: PME# supported from D3hot D3cold [ 0.605385] pci 0000:05:00.0: PME# disabled [ 0.605484] PCI: 0000:06:05.0 reg 10 io port: [2000, 20ff] [ 0.605493] PCI: 0000:06:05.0 reg 14 32bit mmio: [fc220000, fc2200ff] [ 0.605527] PCI: 0000:06:05.0 reg 30 32bit mmio: [fc200000, fc21ffff] [ 0.605546] pci 0000:06:05.0: supports D1 [ 0.605548] pci 0000:06:05.0: supports D2 [ 0.605550] pci 0000:06:05.0: PME# supported from D1 D2 D3hot [ 0.605555] pci 0000:06:05.0: PME# disabled [ 0.605599] pci 0000:00:14.4: transparent bridge [ 0.605603] PCI: bridge 0000:00:14.4 io port: [2000, 2fff] [ 0.605608] PCI: bridge 0000:00:14.4 32bit mmio: [fc200000, fc2fffff] [ 0.605633] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.605824] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGPB._PRT] [ 0.605900] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PBR4._PRT] [ 0.605998] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PBR5._PRT] [ 0.606097] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PBR6._PRT] [ 0.606197] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PBR7._PRT] [ 0.606295] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PIBR._PRT] [ 0.608228] ACPI: PCI Interrupt Link [INTA] (IRQs 3 4 5 7 10 11 12 15) *0, disabled. [ 0.608274] ACPI: PCI Interrupt Link [INTB] (IRQs 3 4 5 7 10 11 12 15) *0, disabled. [ 0.608399] ACPI: PCI Interrupt Link [INTC] (IRQs 3 4 5 7 10 11 12 15) *0, disabled. [ 0.608523] ACPI: PCI Interrupt Link [INTD] (IRQs 3 4 5 7 10 11 12 15) *0, disabled. [ 0.612158] ACPI: PCI Interrupt Link [INTE] (IRQs 3 4 5 7 10 11 12 15) *0, disabled. [ 0.612285] ACPI: PCI Interrupt Link [INTF] (IRQs 9) *0, disabled. [ 0.612408] ACPI: PCI Interrupt Link [INTG] (IRQs 3 4 5 7 10 11 12 15) *0, disabled. [ 0.612532] ACPI: PCI Interrupt Link [INTH] (IRQs 3 4 5 7 10 11 12 15) *0, disabled. [ 0.612615] ACPI: Power Resource [PFN0] (on) [ 0.612615] Linux Plug and Play Support v0.97 (c) Adam Belay [ 0.612615] pnp: PnP ACPI init [ 0.612615] ACPI: bus type pnp registered [ 0.612615] pnp: PnP ACPI: found 6 devices [ 0.612615] ACPI: ACPI bus type pnp unregistered [ 0.612615] PCI: Using ACPI for IRQ routing [ 0.612615] pci 0000:00:00.0: BAR 3: can't allocate resource [ 0.612615] pci 0000:05:00.0: BAR 0: can't allocate resource [ 0.644040] NET: Registered protocol family 8 [ 0.644042] NET: Registered protocol family 20 [ 0.644062] NetLabel: Initializing [ 0.644064] NetLabel: domain hash size = 128 [ 0.644066] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.644081] NetLabel: unlabeled traffic allowed by default [ 0.644162] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0 [ 0.644167] hpet0: 4 32-bit timers, 14318180 Hz [ 0.646411] tracer: 1286 pages allocated for 65536 entries of 80 bytes [ 0.646413] actual entries 65586 [ 0.646545] AppArmor: AppArmor Filesystem Enabled [ 0.646570] ACPI: RTC can wake from S4 [ 0.648047] Switched to high resolution mode on CPU 0 [ 0.648208] Switched to high resolution mode on CPU 1 [ 0.661537] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01 [ 0.661540] pci 0000:00:01.0: IO window: 0x1000-0x1fff [ 0.661544] pci 0000:00:01.0: MEM window: 0xfc000000-0xfc1fffff [ 0.661547] pci 0000:00:01.0: PREFETCH window: 0x000000f0000000-0x000000f7ffffff [ 0.661551] pci 0000:00:04.0: PCI bridge, secondary bus 0000:02 [ 0.661552] pci 0000:00:04.0: IO window: disabled [ 0.661555] pci 0000:00:04.0: MEM window: disabled [ 0.661557] pci 0000:00:04.0: PREFETCH window: disabled [ 0.661561] pci 0000:00:05.0: PCI bridge, secondary bus 0000:03 [ 0.661563] pci 0000:00:05.0: IO window: disabled [ 0.661565] pci 0000:00:05.0: MEM window: disabled [ 0.661567] pci 0000:00:05.0: PREFETCH window: disabled [ 0.661571] pci 0000:00:06.0: PCI bridge, secondary bus 0000:04 [ 0.661572] pci 0000:00:06.0: IO window: disabled [ 0.661575] pci 0000:00:06.0: MEM window: disabled [ 0.661577] pci 0000:00:06.0: PREFETCH window: disabled [ 0.661586] pci 0000:00:07.0: PCI bridge, secondary bus 0000:05 [ 0.661588] pci 0000:00:07.0: IO window: disabled [ 0.661591] pci 0000:00:07.0: MEM window: 0x50000000-0x500fffff [ 0.661593] pci 0000:00:07.0: PREFETCH window: disabled [ 0.661597] pci 0000:00:14.4: PCI bridge, secondary bus 0000:06 [ 0.661603] pci 0000:00:14.4: IO window: 0x2000-0x2fff [ 0.661609] pci 0000:00:14.4: MEM window: 0xfc200000-0xfc2fffff [ 0.661613] pci 0000:00:14.4: PREFETCH window: 0x00000050100000-0x000000501fffff [ 0.661630] pci 0000:00:04.0: setting latency timer to 64 [ 0.661635] pci 0000:00:05.0: setting latency timer to 64 [ 0.661640] pci 0000:00:06.0: setting latency timer to 64 [ 0.661644] pci 0000:00:07.0: enabling device (0000 -> 0002) [ 0.661648] pci 0000:00:07.0: setting latency timer to 64 [ 0.661655] bus: 00 index 0 io port: [0, ffff] [ 0.661657] bus: 00 index 1 mmio: [0, ffffffffffffffff] [ 0.661659] bus: 01 index 0 io port: [1000, 1fff] [ 0.661661] bus: 01 index 1 mmio: [fc000000, fc1fffff] [ 0.661663] bus: 01 index 2 mmio: [f0000000, f7ffffff] [ 0.661665] bus: 01 index 3 mmio: [0, 0] [ 0.661667] bus: 02 index 0 mmio: [0, 0] [ 0.661668] bus: 02 index 1 mmio: [0, 0] [ 0.661670] bus: 02 index 2 mmio: [0, 0] [ 0.661671] bus: 02 index 3 mmio: [0, 0] [ 0.661673] bus: 03 index 0 mmio: [0, 0] [ 0.661675] bus: 03 index 1 mmio: [0, 0] [ 0.661676] bus: 03 index 2 mmio: [0, 0] [ 0.661678] bus: 03 index 3 mmio: [0, 0] [ 0.661680] bus: 04 index 0 mmio: [0, 0] [ 0.661681] bus: 04 index 1 mmio: [0, 0] [ 0.661683] bus: 04 index 2 mmio: [0, 0] [ 0.661684] bus: 04 index 3 mmio: [0, 0] [ 0.661686] bus: 05 index 0 mmio: [0, 0] [ 0.661688] bus: 05 index 1 mmio: [50000000, 500fffff] [ 0.661689] bus: 05 index 2 mmio: [0, 0] [ 0.661691] bus: 05 index 3 mmio: [0, 0] [ 0.661693] bus: 06 index 0 io port: [2000, 2fff] [ 0.661695] bus: 06 index 1 mmio: [fc200000, fc2fffff] [ 0.661697] bus: 06 index 2 mmio: [50100000, 501fffff] [ 0.661698] bus: 06 index 3 io port: [0, ffff] [ 0.661700] bus: 06 index 4 mmio: [0, ffffffffffffffff] [ 0.661713] NET: Registered protocol family 2 [ 0.700092] IP route cache hash table entries: 32768 (order: 6, 262144 bytes) [ 0.700638] TCP established hash table entries: 131072 (order: 9, 2097152 bytes) [ 0.701907] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 0.702474] TCP: Hash tables configured (established 131072 bind 65536) [ 0.702477] TCP reno registered [ 0.712108] NET: Registered protocol family 1 [ 0.712226] checking if image is initramfs... it is [ 1.401664] Freeing initrd memory: 8408k freed [ 1.407773] audit: initializing netlink socket (disabled) [ 1.407788] type=2000 audit(4078920428.404:1): initialized [ 1.413379] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 1.416321] VFS: Disk quotas dquot_6.5.1 [ 1.416431] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 1.416549] msgmni has been set to 1749 [ 1.416695] io scheduler noop registered [ 1.416697] io scheduler anticipatory registered [ 1.416699] io scheduler deadline registered [ 1.416858] io scheduler cfq registered (default) [ 1.416961] pci 0000:01:05.0: Boot video device [ 1.417157] pcieport-driver 0000:00:04.0: setting latency timer to 64 [ 1.417176] pcieport-driver 0000:00:04.0: found MSI capability [ 1.417200] pci_express 0000:00:04.0:pcie00: allocate port service [ 1.417295] pcieport-driver 0000:00:05.0: setting latency timer to 64 [ 1.417313] pcieport-driver 0000:00:05.0: found MSI capability [ 1.417332] pci_express 0000:00:05.0:pcie00: allocate port service [ 1.417424] pcieport-driver 0000:00:06.0: setting latency timer to 64 [ 1.417442] pcieport-driver 0000:00:06.0: found MSI capability [ 1.417460] pci_express 0000:00:06.0:pcie00: allocate port service [ 1.417553] pcieport-driver 0000:00:07.0: setting latency timer to 64 [ 1.417571] pcieport-driver 0000:00:07.0: found MSI capability [ 1.417590] pci_express 0000:00:07.0:pcie00: allocate port service [ 1.465611] hpet_resources: 0xfed00000 is busy [ 1.465690] Linux agpgart interface v0.103 [ 1.465695] Serial: 8250/16550 driver4 ports, IRQ sharing enabled [ 1.465875] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 1.468640] brd: module loaded [ 1.468738] input: Macintosh mouse button emulation as /devices/virtual/input/input0 [ 1.468989] PNP: No PS/2 controller found. Probing ports directly. [ 1.471332] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 1.471338] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 1.488235] mice: PS/2 mouse device common for all mice [ 1.488406] rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0 [ 1.488434] rtc0: alarms up to one day, hpet irqs [ 1.488491] cpuidle: using governor ladder [ 1.488493] cpuidle: using governor menu [ 1.488902] TCP cubic registered [ 1.489189] registered taskstats version 1 [ 1.489355] Magic number: 15:944:490 [ 1.489511] rtc_cmos 00:01: setting system clock to 1999-04-03 17:27:08 UTC (923160428) [ 1.489514] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 1.489516] EDD information not available. [ 1.489552] Freeing unused kernel memory: 536k freed [ 1.489820] Write protecting the kernel read-only data: 4348k [ 1.525086] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1 [ 1.636278] fuse init (API version 7.9) [ 1.711736] fan PNP0C0B:00: registered as cooling_device0 [ 1.711743] ACPI: Fan [FAN0] (on) [ 1.718388] processor ACPI0007:00: registered as cooling_device1 [ 1.718394] ACPI: Processor [CPU0] (supports 8 throttling states) [ 1.718500] processor ACPI0007:01: registered as cooling_device2 [ 1.732484] thermal LNXTHERM:01: registered as thermal_zone0 [ 1.756215] ACPI: Thermal Zone [TZ00] (40 C) [ 1.994162] No dock devices found. [ 2.008088] SCSI subsystem initialized [ 2.023502] libata version 3.00 loaded. [ 2.034036] ahci 0000:00:12.0: version 3.0 [ 2.034060] ahci 0000:00:12.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22 [ 2.034086] ahci 0000:00:12.0: controller can't do 64bit DMA, forcing 32bit [ 2.034175] ahci 0000:00:12.0: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl SATA mode [ 2.034179] ahci 0000:00:12.0: flags: ncq sntf ilck pm led clo pmp pio slum part [ 2.042966] scsi0 : ahci [ 2.043171] scsi1 : ahci [ 2.043300] scsi2 : ahci [ 2.043438] scsi3 : ahci [ 2.043554] ata1: SATA max UDMA/133 abar m1024@0xfc309000 port 0xfc309100 irq 22 [ 2.043558] ata2: SATA max UDMA/133 abar m1024@0xfc309000 port 0xfc309180 irq 22 [ 2.043562] ata3: SATA max UDMA/133 abar m1024@0xfc309000 port 0xfc309200 irq 22 [ 2.043565] ata4: SATA max UDMA/133 abar m1024@0xfc309000 port 0xfc309280 irq 22 [ 2.084158] usbcore: registered new interface driver usbfs [ 2.084186] usbcore: registered new interface driver hub [ 2.101255] usbcore: registered new device driver usb [ 2.115430] ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver [ 2.118487] 8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004) [ 2.373047] ata1: SATA link down (SStatus 0 SControl 300) [ 2.873021] ata2: softreset failed (device not ready) [ 2.873027] ata2: failed due to HW bug, retry pmp=0 [ 3.036036] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 3.081206] ata2.00: ATA-7: ST3250620NS, 3.AEG, max UDMA/133 [ 3.081210] ata2.00: 488397168 sectors, multi 0: LBA48 NCQ (depth 31/32) [ 3.081218] ata2.00: SB600 AHCI: limiting to 255 sectors per cmd [ 3.139514] ata2.00: SB600 AHCI: limiting to 255 sectors per cmd [ 3.139517] ata2.00: configured for UDMA/133 [ 3.473036] ata3: SATA link down (SStatus 0 SControl 300) [ 3.808038] ata4: SATA link down (SStatus 0 SControl 300) [ 3.824068] isa bounce pool size: 16 pages [ 3.824159] scsi 1:0:0:0: Direct-Access ATA ST3250620NS 3.AE PQ: 0 ANSI: 5 [ 3.825852] ohci_hcd 0000:00:13.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 3.825871] ohci_hcd 0000:00:13.0: OHCI Host Controller [ 3.825941] ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 1 [ 3.825971] ohci_hcd 0000:00:13.0: irq 16, io mem 0xfc304000 [ 3.885716] usb usb1: configuration #1 chosen from 1 choice [ 3.886190] hub 1-0:1.0: USB hub found [ 3.886206] hub 1-0:1.0: 2 ports detected [ 3.990980] ohci_hcd 0000:00:13.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 3.991000] ohci_hcd 0000:00:13.1: OHCI Host Controller [ 3.991043] ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 2 [ 3.991073] ohci_hcd 0000:00:13.1: irq 17, io mem 0xfc305000 [ 4.048667] usb usb2: configuration #1 chosen from 1 choice [ 4.049181] hub 2-0:1.0: USB hub found [ 4.049197] hub 2-0:1.0: 2 ports detected [ 4.154320] ohci_hcd 0000:00:13.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 4.154340] ohci_hcd 0000:00:13.2: OHCI Host Controller [ 4.154373] ohci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 3 [ 4.154405] ohci_hcd 0000:00:13.2: irq 18, io mem 0xfc306000 [ 4.212756] usb usb3: configuration #1 chosen from 1 choice [ 4.213292] hub 3-0:1.0: USB hub found [ 4.213308] hub 3-0:1.0: 2 ports detected [ 4.317429] ohci_hcd 0000:00:13.3: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 4.317449] ohci_hcd 0000:00:13.3: OHCI Host Controller [ 4.317481] ohci_hcd 0000:00:13.3: new USB bus registered, assigned bus number 4 [ 4.317500] ohci_hcd 0000:00:13.3: irq 17, io mem 0xfc307000 [ 4.376693] usb usb4: configuration #1 chosen from 1 choice [ 4.377254] hub 4-0:1.0: USB hub found [ 4.377270] hub 4-0:1.0: 2 ports detected [ 4.481840] ohci_hcd 0000:00:13.4: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 4.481860] ohci_hcd 0000:00:13.4: OHCI Host Controller [ 4.481894] ohci_hcd 0000:00:13.4: new USB bus registered, assigned bus number 5 [ 4.481915] ohci_hcd 0000:00:13.4: irq 18, io mem 0xfc308000 [ 4.540742] usb usb5: configuration #1 chosen from 1 choice [ 4.541344] hub 5-0:1.0: USB hub found [ 4.541361] hub 5-0:1.0: 2 ports detected [ 4.645448] ehci_hcd 0000:00:13.5: PCI INT D -> GSI 19 (level, low) -> IRQ 19 [ 4.645466] ehci_hcd 0000:00:13.5: EHCI Host Controller [ 4.645509] ehci_hcd 0000:00:13.5: new USB bus registered, assigned bus number 6 [ 4.645550] ehci_hcd 0000:00:13.5: debug port 1 [ 4.645572] ehci_hcd 0000:00:13.5: irq 19, io mem 0xfc30a000 [ 4.657019] ehci_hcd 0000:00:13.5: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 [ 4.657137] usb usb6: configuration #1 chosen from 1 choice [ 4.657164] hub 6-0:1.0: USB hub found [ 4.657172] hub 6-0:1.0: 10 ports detected [ 4.760581] tg3.c:v3.94 (August 14, 2008) [ 4.760592] tg3 0000:05:00.0: enabling device (0000 -> 0002) [ 4.760599] tg3 0000:05:00.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19 [ 4.760607] tg3 0000:05:00.0: setting latency timer to 64 [ 4.772099] scsi 1:0:0:0: Attached scsi generic sg0 type 0 [ 4.890918] tg3: (0000:05:00.0) phy probe failed, err -19 [ 4.900162] Driver 'sd' needs updating - please use bus_type methods [ 4.902212] sd 1:0:0:0: [sda] 488397168 512-byte hardware sectors (250059 MB) [ 4.902237] sd 1:0:0:0: [sda] Write Protect is off [ 4.902240] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 4.902278] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 4.902379] sd 1:0:0:0: [sda] 488397168 512-byte hardware sectors (250059 MB) [ 4.902399] sd 1:0:0:0: [sda] Write Protect is off [ 4.902401] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 4.902437] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 4.902442] sda: sda1 sda2 < sda5 > [ 4.934335] sd 1:0:0:0: [sda] Attached SCSI disk [ 5.689050] tg3: Problem fetching invariants of chip, aborting. [ 5.689080] tg3 0000:05:00.0: PCI INT A disabled [ 5.689150] 8139cp 0000:06:05.0: This (id 10ec:8139 rev 10) is not an 8139C+ compatible chip [ 5.689153] 8139cp 0000:06:05.0: Try the "8139too" driver instead. [ 5.691844] 8139too Fast Ethernet driver 0.9.28 [ 5.691901] 8139too 0000:06:05.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20 [ 5.692986] eth0: RealTek RTL8139 at 0x2000, 00:e0:4c:f4:21:28, IRQ 20 [ 5.692988] eth0: Identified 8139 chip type 'RTL-8100B/8139D' [ 5.696991] pata_acpi 0000:00:14.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 5.699618] scsi4 : pata_atiixp [ 5.699713] scsi5 : pata_atiixp [ 5.700275] ata5: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x3010 irq 14 [ 5.700278] ata6: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x3018 irq 15 [ 6.063677] PM: Starting manual resume from disk [ 6.063681] PM: Resume from partition 8:5 [ 6.063682] PM: Checking hibernation image. [ 6.063842] PM: Resume from disk failed. [ 10.792597] udevd version 124 started [ 11.042474] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 11.068715] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 11.223982] input: Power Button (FF) as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2 [ 11.245058] ACPI: Power Button (FF) [PWRF] [ 11.245231] input: Power Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input3 [ 11.277054] ACPI: Power Button (CM) [PWRB] [ 11.714802] ACPI: I/O resource piix4_smbus [0xb00-0xb07] conflicts with ACPI region SMB0 [0xb00-0xb0b] [ 11.714806] ACPI: Device needs an ACPI driver [ 11.714814] piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0 [ 12.042637] HDA Intel 0000:00:14.2: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 12.081860] input: PC Speaker as /devices/platform/pcspkr/input/input4 [ 12.098031] hda_codec: Unknown model for ALC882, trying auto-probe from BIOS... [ 12.136403] HDA Intel 0000:01:05.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19 [ 12.812879] input: ImExPS/2 Generic Explorer Mouse as /devices/platform/i8042/serio1/input/input5 [ 13.928724] lp: driver loaded but no devices found [ 14.155840] Adding 995988k swap on /dev/sda5. Priority:-1 extents:1 across:995988k [ 15.701627] type=1505 audit(923160443.036:2): operation="profile_load" name="/usr/share/gdm/guest-session/Xsession" name2="default" pid=4197 [ 15.864954] type=1505 audit(923160443.196:3): operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" name2="default" pid=4202 [ 15.865180] type=1505 audit(923160443.200:4): operation="profile_load" name="/usr/sbin/cupsd" name2="default" pid=4202 [ 15.993393] ip_tables: (C) 2000-2006 Netfilter Core Team [ 16.613230] ACPI: WMI: Mapper loaded [ 16.824729] powernow-k8: Found 1 AMD Turion(tm) 64 X2 Mobile Technology TL-62 processors (2 cpu cores) (version 2.20.00) [ 16.824812] powernow-k8: 0 : fid 0xd (2100 MHz), vid 0x11 [ 16.824817] powernow-k8: 1 : fid 0xc (2000 MHz), vid 0x12 [ 16.824819] powernow-k8: 2 : fid 0xa (1800 MHz), vid 0x13 [ 16.824821] powernow-k8: 3 : fid 0x8 (1600 MHz), vid 0x14 [ 16.824823] powernow-k8: 4 : fid 0x0 (800 MHz), vid 0x1e [ 16.824871] powernow-k8: ph2 null fid transition 0xd [ 17.404798] warning: `avahi-daemon' uses 32-bit capabilities (legacy support in use) [ 17.576357] ppdev: user-space parallel port driver [ 18.533062] Bluetooth: Core ver 2.13 [ 18.535433] NET: Registered protocol family 31 [ 18.535440] Bluetooth: HCI device and connection manager initialized [ 18.535445] Bluetooth: HCI socket layer initialized [ 18.552856] Bluetooth: L2CAP ver 2.11 [ 18.552872] Bluetooth: L2CAP socket layer initialized [ 18.566343] Bluetooth: SCO (Voice Link) ver 0.6 [ 18.566360] Bluetooth: SCO socket layer initialized [ 18.588000] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 18.588011] Bluetooth: BNEP filters: protocol multicast [ 18.610022] Bridge firewalling registered [ 18.611616] pan0: Dropping NETIF_F_UFO since no NETIF_F_HW_CSUM feature. [ 18.952542] Bluetooth: RFCOMM socket layer initialized [ 18.954161] Bluetooth: RFCOMM TTY layer initialized [ 18.954173] Bluetooth: RFCOMM ver 1.10 [ 19.001025] Clocksource tsc unstable (delta = -114628028 ns) [ 20.503872] pci 0000:01:05.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [ 20.688236] [drm] Initialized drm 1.1.0 20060810 [ 20.704751] [drm] Initialized radeon 1.29.0 20080528 on minor 0 [ 21.091406] [drm] Setting GART location based on new memory map [ 21.094256] [drm] Loading RS690 Microcode [ 21.094318] [drm] Num pipes: 1 [ 21.094329] [drm] writeback test succeeded in 1 usecs [ 23.089104] eth0: link up, 100Mbps, full-duplex, lpa 0x45E1 [ 23.296602] NET: Registered protocol family 17 [ 25.240184] hda-intel: Invalid position buffer, using LPIB read method instead. [ 40.645160] mixer_applet2[5626]: segfault at 7ffa6e0100a6 ip 00007ffa71f93c35 sp 00007fff7a1a58b0 error 4 in ld-2.8.90.so[7ffa71f8a000+1f000] [ 112.918325] type=1503 audit(923160540.252:5): operation="inode_permission" requested_mask="r::" denied_mask="r::" fsuid=7 name="/proc/5699/net/" pid=5699 profile="/usr/sbin/cupsd" [ 114.155897] type=1503 audit(923160541.488:6): operation="inode_permission" requested_mask="r::" denied_mask="r::" fsuid=7 name="/proc/5703/net/" pid=5703 profile="/usr/sbin/cupsd" [ 114.264357] NET: Registered protocol family 10 [ 114.268203] lo: Disabled Privacy Extensions [ 114.272979] type=1503 audit(923160541.607:7): operation="socket_create" family="ax25" sock_type="dgram" protocol=0 pid=5703 profile="/usr/sbin/cupsd" [ 114.277550] type=1503 audit(923160541.611:8): operation="socket_create" family="netrom" sock_type="seqpacket" protocol=0 pid=5703 profile="/usr/sbin/cupsd" [ 114.282245] type=1503 audit(923160541.615:9): operation="socket_create" family="rose" sock_type="dgram" protocol=0 pid=5703 profile="/usr/sbin/cupsd" [ 114.286802] type=1503 audit(923160541.619:10): operation="socket_create" family="ipx" sock_type="dgram" protocol=0 pid=5703 profile="/usr/sbin/cupsd" [ 114.291304] type=1503 audit(923160541.623:11): operation="socket_create" family="appletalk" sock_type="dgram" protocol=0 pid=5703 profile="/usr/sbin/cupsd" [ 114.296035] type=1503 audit(923160541.631:12): operation="socket_create" family="econet" sock_type="dgram" protocol=0 pid=5703 profile="/usr/sbin/cupsd" [ 114.296058] type=1503 audit(923160541.631:13): operation="socket_create" family="ash" sock_type="dgram" protocol=0 pid=5703 profile="/usr/sbin/cupsd" [ 124.700035] eth0: no IPv6 routers present