<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN">
<html>
<head>
<meta content="text/html; charset=UTF-8" http-equiv="Content-Type">
<title></title>
</head>
<body bgcolor="#ffffff" text="#000000">
Hi, Vadim,<br>
<br>
nice to see that you guys are finally looking into coreboot on i945.
It's been a while! <br>
The version you are using requires 2 equal DIMMs populated on the
mainboard.<br>
<br>
Best wishes,<br>
Stefan<br>
<br>
<br>
<br>
On 31.03.2009 15:31 Uhr, Vadim wrote:
<blockquote
cite="mid:4B0608CEC43E5C4F9BF507FFD2AABD6F8B6EB7@sbs-server.DANEL.LOCAL"
type="cite">
<meta http-equiv="Content-Type" content="text/html; charset=UTF-8">
<meta content="MSHTML 6.00.6000.16809" name="GENERATOR">
<div><span lang="EN">
<p><font face="Arial" size="2">coreboot-3.0.1161 Wed Mar 25 11:26:19
EDT 2009 starting... (console_loglevel=8)</font></p>
<p><font face="Arial" size="2">Choosing fallback boot.</font></p>
<p><font face="Arial" size="2">LAR: Attempting to open
'fallback/initram/segment0'.</font></p>
<p><font face="Arial" size="2">LAR: Start 0xfff80000 len 0x80000</font></p>
<p><font face="Arial" size="2">LAR: seen member
normal/option_table@0xfff80000, size 984</font></p>
<p><font face="Arial" size="2">LAR: seen member
normal/initram/segment0@0xfff80430, size 21284</font></p>
<p><font face="Arial" size="2">LAR: seen member
normal/stage2/segment0@0xfff857b0, size 1</font></p>
<p><font face="Arial" size="2">LAR: seen member
normal/stage2/segment1@0xfff85810, size 25731</font></p>
<p><font face="Arial" size="2">LAR: seen member
normal/stage2/segment2@0xfff8bcf0, size 999</font></p>
<p><font face="Arial" size="2">LAR: seen member
normal/payload/segment0@0xfff8c130, size 1</font></p>
<p><font face="Arial" size="2">LAR: seen member
normal/payload/segment1@0xfff8c190, size 40402</font></p>
<p><font face="Arial" size="2">LAR: seen member
normal/payload/segment2@0xfff95fc0, size 47</font></p>
<p><font face="Arial" size="2">LAR: seen member bootblock@0xffffafc0,
size 20480</font></p>
<p><font face="Arial" size="2">LAR: File not found!</font></p>
<p><font face="Arial" size="2">LAR: Run file
fallback/initram/segment0 failed: No such file.</font></p>
<p><font face="Arial" size="2">Fallback failed. Try normal boot</font></p>
<p><font face="Arial" size="2">LAR: Attempting to open
'normal/initram/segment0'.</font></p>
<p><font face="Arial" size="2">LAR: Start 0xfff80000 len 0x80000</font></p>
<p><font face="Arial" size="2">LAR: seen member
normal/option_table@0xfff80000, size 984</font></p>
<p><font face="Arial" size="2">LAR: seen member
normal/initram/segment0@0xfff80430, size 21284</font></p>
<p><font face="Arial" size="2">LAR: CHECK normal/initram/segment0 @
0xfff80430</font></p>
<p><font face="Arial" size="2">start 0xfff80480 len 21284 reallen
21284 compression 0 entry 0x0000391f loadaddress 0x00000000</font></p>
<p><font face="Arial" size="2">Entry point is 0xfff83d9f</font></p>
<p><font face="Arial" size="2">Hi there from stage1, cpu0, core0</font></p>
<p><font face="Arial" size="2">Mobile Intel(R) 945GM/GME Express
Chipset</font></p>
<p><font face="Arial" size="2">(G)MCH capable of up to FSB 800 MHz</font></p>
<p><font face="Arial" size="2">(G)MCH capable of up to DDR2-667</font></p>
<p><font face="Arial" size="2">Setting up static southbridge
registers... GPIOS... done.</font></p>
<p><font face="Arial" size="2">Disabling Watchdog reboot... done.</font></p>
<p><font face="Arial" size="2">Setting up static northbridge
registers... done.</font></p>
<p><font face="Arial" size="2">Waiting for MCHBAR to come up...ok</font></p>
<p><font face="Arial" size="2">SMBus controller enabled.</font></p>
<p><font face="Arial" size="2">Setting up RAM controller.</font></p>
<p><font face="Arial" size="2">SDRAM_CAPABILITIES_DUAL_CHENAL =
0x00000000</font></p>
<p><font face="Arial" size="2">This mainboard supports only Single
Channel Operation.</font></p>
<p><font face="Arial" size="2">SDRAM_CAPABILITIES_DUAL_CHENAL =
0x00000000</font></p>
<p><font face="Arial" size="2">DDR II Channel 0 Socket 0: x8DDS</font></p>
<p><font face="Arial" size="2">SDRAM_CAPABILITIES_DUAL_CHENAL =
0x00000000</font></p>
<p><font face="Arial" size="2">lowest common cas = 3</font></p>
<p><font face="Arial" size="2">Probing Speed 2</font></p>
<p><font face="Arial" size="2">DIMM: 0</font></p>
<p><font face="Arial" size="2">Current CAS mask: 0038; idx=2,
tCLK=50, tAC=60: Not fast enough!</font></p>
<p><font face="Arial" size="2">Current CAS mask: 0030; idx=1,
tCLK=3d, tAC=50: Not fast enough!</font></p>
<p><font face="Arial" size="2">Current CAS mask: 0020; idx=0,
tCLK=30, tAC=45: OK</font></p>
<p><font face="Arial" size="2">DIMM: 1</font></p>
<p><font face="Arial" size="2">freq_cas_mask for speed 2: 0020</font></p>
<p><font face="Arial" size="2">Memory will be driven at 667MHz with
CAS=5 clocks</font></p>
<p><font face="Arial" size="2">tRAS = 15 cycles</font></p>
<p><font face="Arial" size="2">tRP = 5 cycles</font></p>
<p><font face="Arial" size="2">tRCD = 5 cycles</font></p>
<p><font face="Arial" size="2">Refresh: 7.8us</font></p>
<p><font face="Arial" size="2">tWR = 5 cycles</font></p>
<p><font face="Arial" size="2">DIMM 0 side 0 = 512 MB</font></p>
<p><font face="Arial" size="2">DIMM 0 side 1 = 512 MB</font></p>
<p><font face="Arial" size="2">tRFC = 35 cycles</font></p>
<p><font face="Arial" size="2">Setting Graphics Frequency... </font></p>
<p><font face="Arial" size="2">Setting Memory Frequency...
CLKCFG=0x00010023, CLKCFG=0x00010043, ok</font></p>
<p><font face="Arial" size="2">Setting mode of operation for memory
channels...SDRAM_CAPABILITIES_DUAL_CHENAL = 0x00000000</font></p>
<p><font face="Arial" size="2">Single Channel 0 only.</font></p>
<p><font face="Arial" size="2">DCC=0x00000400</font></p>
<p><font face="Arial" size="2">Programming Clock Crossing...MEM=667
FSB=667... ok</font></p>
<p><font face="Arial" size="2">Setting RAM size... </font></p>
<p><font face="Arial" size="2">C0DRB = 0x00002010</font></p>
<p><font face="Arial" size="2">C1DRB = 0x00000000</font></p>
<p><font face="Arial" size="2">TOLUD = 0x70</font></p>
<p><font face="Arial" size="2">Setting row attributes... </font></p>
<p><font face="Arial" size="2">C0DRA = 0x0033</font></p>
<p><font face="Arial" size="2">C1DRA = 0x0000</font></p>
<p><font face="Arial" size="2">one dimm per channel config.. </font></p>
<p><font face="Arial" size="2">Initializing System Memory IO... </font></p>
<p><font face="Arial" size="2">SDRAM_CAPABILITIES_DUAL_CHENAL =
0x00000000</font></p>
<p><font face="Arial" size="2">SDRAM_CAPABILITIES_DUAL_CHENAL =
0x00000000</font></p>
<p><font face="Arial" size="2">Programming Single Channel RCOMP</font></p>
<p><font face="Arial" size="2">Table Index: 19</font></p>
<p><font face="Arial" size="2">Programming DLL Timings... </font></p>
<p><font face="Arial" size="2">Enabling System Memory IO... </font></p>
<p><font face="Arial" size="2">jedec enable sequence: bank 0</font></p>
<p><font face="Arial" size="2">Apply NOP</font></p>
<p><font face="Arial" size="2">Sending RAM command 0x00010400...done</font></p>
<p><font face="Arial" size="2">ram read: 00000000</font></p>
<p><font face="Arial" size="2">All Banks Precharge</font></p>
<p><font face="Arial" size="2">Sending RAM command 0x00020400...done</font></p>
<p><font face="Arial" size="2">ram read: 00000000</font></p>
<p><font face="Arial" size="2">Extended Mode Register Set(2)</font></p>
<p><font face="Arial" size="2">Sending RAM command 0x00240400...done</font></p>
<p><font face="Arial" size="2">ram read: 00000000</font></p>
<p><font face="Arial" size="2">Extended Mode Register Set(3)</font></p>
<p><font face="Arial" size="2">Sending RAM command 0x00440400...done</font></p>
<p><font face="Arial" size="2">ram read: 00000000</font></p>
<p><font face="Arial" size="2">Extended Mode Register Set</font></p>
<p><font face="Arial" size="2">Sending RAM command 0x00040400...done</font></p>
<p><font face="Arial" size="2">SDRAM_CAPABILITIES_DUAL_CHENAL =
0x00000000</font></p>
<p><font face="Arial" size="2">ram read: 00000020</font></p>
<p><font face="Arial" size="2">MRS: Reset DLLs</font></p>
<p><font face="Arial" size="2">Sending RAM command 0x00030400...done</font></p>
<p><font face="Arial" size="2">ram read: 00004a98</font></p>
<p><font face="Arial" size="2">All Banks Precharge</font></p>
<p><font face="Arial" size="2">Sending RAM command 0x00020400...done</font></p>
<p><font face="Arial" size="2">ram read: 00000000</font></p>
<p><font face="Arial" size="2">CAS before RAS</font></p>
<p><font face="Arial" size="2">Sending RAM command 0x00060400...done</font></p>
<p><font face="Arial" size="2">ram read: 00000000</font></p>
<p><font face="Arial" size="2">ram read: 00000000</font></p>
<p><font face="Arial" size="2">MRS: Enable DLLs</font></p>
<p><font face="Arial" size="2">Sending RAM command 0x00030400...done</font></p>
<p><font face="Arial" size="2">ram read: 00004298</font></p>
<p><font face="Arial" size="2">Extended Mode Register Set: ODT/OCD</font></p>
<p><font face="Arial" size="2">Sending RAM command 0x00040400...done</font></p>
<p><font face="Arial" size="2">SDRAM_CAPABILITIES_DUAL_CHENAL =
0x00000000</font></p>
<p><font face="Arial" size="2">ram read: 00001c20</font></p>
<p><font face="Arial" size="2">Extended Mode Register Set: OCD Exit</font></p>
<p><font face="Arial" size="2">Sending RAM command 0x00040400...done</font></p>
<p><font face="Arial" size="2">SDRAM_CAPABILITIES_DUAL_CHENAL =
0x00000000</font></p>
<p><font face="Arial" size="2">ram read: 00000020</font></p>
<p><font face="Arial" size="2">jedec enable sequence: bank 1</font></p>
<p><font face="Arial" size="2">bankaddr from bank size of rank 0</font></p>
<p><font face="Arial" size="2">Apply NOP</font></p>
<p><font face="Arial" size="2">Sending RAM command 0x00010400...done</font></p>
<p><font face="Arial" size="2">ram read: 20000000</font></p>
<p><font face="Arial" size="2">All Banks Precharge</font></p>
<p><font face="Arial" size="2">Sending RAM command 0x00020400...done</font></p>
<p><font face="Arial" size="2">ram read: 20000000</font></p>
<p><font face="Arial" size="2">Extended Mode Register Set(2)</font></p>
<p><font face="Arial" size="2">Sending RAM command 0x00240400...done</font></p>
<p><font face="Arial" size="2">ram read: 20000000</font></p>
<p><font face="Arial" size="2">Extended Mode Register Set(3)</font></p>
<p><font face="Arial" size="2">Sending RAM command 0x00440400...done</font></p>
<p><font face="Arial" size="2">ram read: 20000000</font></p>
<p><font face="Arial" size="2">Extended Mode Register Set</font></p>
<p><font face="Arial" size="2">Sending RAM command 0x00040400...done</font></p>
<p><font face="Arial" size="2">SDRAM_CAPABILITIES_DUAL_CHENAL =
0x00000000</font></p>
<p><font face="Arial" size="2">ram read: 20000020</font></p>
<p><font face="Arial" size="2">MRS: Reset DLLs</font></p>
<p><font face="Arial" size="2">Sending RAM command 0x00030400...done</font></p>
<p><font face="Arial" size="2">ram read: 20004a98</font></p>
<p><font face="Arial" size="2">All Banks Precharge</font></p>
<p><font face="Arial" size="2">Sending RAM command 0x00020400...done</font></p>
<p><font face="Arial" size="2">ram read: 20000000</font></p>
<p><font face="Arial" size="2">CAS before RAS</font></p>
<p><font face="Arial" size="2">Sending RAM command 0x00060400...done</font></p>
<p><font face="Arial" size="2">ram read: 20000000</font></p>
<p><font face="Arial" size="2">ram read: 20000000</font></p>
<p><font face="Arial" size="2">MRS: Enable DLLs</font></p>
<p><font face="Arial" size="2">Sending RAM command 0x00030400...done</font></p>
<p><font face="Arial" size="2">ram read: 20004298</font></p>
<p><font face="Arial" size="2">Extended Mode Register Set: ODT/OCD</font></p>
<p><font face="Arial" size="2">Sending RAM command 0x00040400...done</font></p>
<p><font face="Arial" size="2">SDRAM_CAPABILITIES_DUAL_CHENAL =
0x00000000</font></p>
<p><font face="Arial" size="2">ram read: 20001c20</font></p>
<p><font face="Arial" size="2">Extended Mode Register Set: OCD Exit</font></p>
<p><font face="Arial" size="2">Sending RAM command 0x00040400...done</font></p>
<p><font face="Arial" size="2">SDRAM_CAPABILITIES_DUAL_CHENAL =
0x00000000</font></p>
<p><font face="Arial" size="2">ram read: 20000020</font></p>
<p><font face="Arial" size="2">jedec enable sequence: bank 4</font></p>
<p><font face="Arial" size="2">bankaddr from bank size of rank 1</font></p>
<p><font face="Arial" size="2">Apply NOP</font></p>
<p><font face="Arial" size="2">Sending RAM command 0x00010400...done</font></p>
<p><font face="Arial" size="2">ram read: 40000000</font></p>
<p><font face="Arial" size="2">All Banks Precharge</font></p>
<p><font face="Arial" size="2">Sending RAM command 0x00020400...done</font></p>
<p><font face="Arial" size="2">ram read: 40000000</font></p>
<p><font face="Arial" size="2">Extended Mode Register Set(2)</font></p>
<p><font face="Arial" size="2">Sending RAM command 0x00240400...done</font></p>
<p><font face="Arial" size="2">ram read: 40000000</font></p>
<p><font face="Arial" size="2">Extended Mode Register Set(3)</font></p>
<p><font face="Arial" size="2">Sending RAM command 0x00440400...done</font></p>
<p><font face="Arial" size="2">ram read: 40000000</font></p>
<p><font face="Arial" size="2">Extended Mode Register Set</font></p>
<p><font face="Arial" size="2">Sending RAM command 0x00040400...done</font></p>
<p><font face="Arial" size="2">SDRAM_CAPABILITIES_DUAL_CHENAL =
0x00000000</font></p>
<p><font face="Arial" size="2">ram read: 40000020</font></p>
<p><font face="Arial" size="2">MRS: Reset DLLs</font></p>
<p><font face="Arial" size="2">Sending RAM command 0x00030400...done</font></p>
<p><font face="Arial" size="2">ram read: 40004a98</font></p>
<p><font face="Arial" size="2">All Banks Precharge</font></p>
<p><font face="Arial" size="2">Sending RAM command 0x00020400...done</font></p>
<p><font face="Arial" size="2">ram read: 40000000</font></p>
<p><font face="Arial" size="2">CAS before RAS</font></p>
<p><font face="Arial" size="2">Sending RAM command 0x00060400...done</font></p>
<p><font face="Arial" size="2">ram read: 40000000</font></p>
<p><font face="Arial" size="2">ram read: 40000000</font></p>
<p><font face="Arial" size="2">MRS: Enable DLLs</font></p>
<p><font face="Arial" size="2">Sending RAM command 0x00030400...done</font></p>
<p><font face="Arial" size="2">ram read: 40004298</font></p>
<p><font face="Arial" size="2">Extended Mode Register Set: ODT/OCD</font></p>
<p><font face="Arial" size="2">Sending RAM command 0x00040400...done</font></p>
<p><font face="Arial" size="2">SDRAM_CAPABILITIES_DUAL_CHENAL =
0x00000000</font></p>
<p><font face="Arial" size="2">ram read: 40001c20</font></p>
<p><font face="Arial" size="2">Extended Mode Register Set: OCD Exit</font></p>
<p><font face="Arial" size="2">Sending RAM command 0x00040400...done</font></p>
<p><font face="Arial" size="2">SDRAM_CAPABILITIES_DUAL_CHENAL =
0x00000000</font></p>
<p><font face="Arial" size="2">ram read: 40000020</font></p>
<p><font face="Arial" size="2">Normal Operation</font></p>
<p><font face="Arial" size="2">Sending RAM command 0x000f0400...done</font></p>
<p><font face="Arial" size="2">receive_enable_autoconfig() for
channel 0</font></p>
<p><font face="Arial" size="2">find_strobes_low()</font></p>
<p><font face="Arial" size="2">set_receive_enable() medium=0x3,
coarse=0x5</font></p>
<p><font face="Arial" size="2">set_receive_enable() medium=0x1,
coarse=0x5</font></p>
<p><font face="Arial" size="2">find_strobes_edge()</font></p>
<p><font face="Arial" size="2">set_receive_enable() medium=0x1,
coarse=0x5</font></p>
<p><font face="Arial" size="2">add_quarter_clock() mediumcoarse=15
fine=d7</font></p>
<p><font face="Arial" size="2">set_receive_enable() medium=0x3,
coarse=0x5</font></p>
<p><font face="Arial" size="2">find_preamble()</font></p>
<p><font face="Arial" size="2">set_receive_enable() medium=0x3,
coarse=0x4</font></p>
<p><font face="Arial" size="2">set_receive_enable() medium=0x3,
coarse=0x3</font></p>
<p><font face="Arial" size="2">add_quarter_clock() mediumcoarse=0f
fine=57</font></p>
<p><font face="Arial" size="2">normalize()</font></p>
<p><font face="Arial" size="2">RAM initialization finished.</font></p>
<p><font face="Arial" size="2">Setting up Egress Port RCRB</font></p>
<p><font face="Arial" size="2">Loading port arbitration table ...ok</font></p>
<p><font face="Arial" size="2">Wait for VC1 negotiation ...ok</font></p>
<p><font face="Arial" size="2">Setting up DMI RCRB</font></p>
<p><font face="Arial" size="2">Wait for VC1 negotiation ...timeout!</font></p>
<p><font face="Arial" size="2">Waiting for DMI hardware...ok</font></p>
<p><font face="Arial" size="2">Disabling PCI Express x16 Link</font></p>
<p><font face="Arial" size="2">Wait for link to enter detect state...
ok</font></p>
<p><font face="Arial" size="2">Setting up Root Complex Topology</font></p>
<p><font face="Arial" size="2">run_file returns with 0</font></p>
<p><font face="Arial" size="2">Done RAM init code</font></p>
<p><font face="Arial" size="2">Done printk() buffer move</font></p>
<p><font face="Arial" size="2">disable_car entry</font></p>
<p><font face="Arial" size="2">disable_car global_vars copy done</font></p>
<p><font face="Arial" size="2">NEWLOCATION = 0x00088fc8</font></p>
<p><font face="Arial" size="2">disable_car global_vars pointer
adjusted</font></p>
<p><font face="Arial" size="2">entering asm code now</font></p>
<p><font face="Arial" size="2">LAR: Attempting to open
'normal/stage2/segment0'.</font></p>
<p><font face="Arial" size="2">LAR: Start 0xfff80000 len 0x80000</font></p>
<p><font face="Arial" size="2">LAR: seen member
normal/option_table@0xfff80000, size 984</font></p>
<p><font face="Arial" size="2">LAR: seen member
normal/initram/segment0@0xfff80430, size 21284</font></p>
<p><font face="Arial" size="2">LAR: seen member
normal/stage2/segment0@0xfff857b0, size 1</font></p>
<p><font face="Arial" size="2">LAR: CHECK normal/stage2/segment0 @
0xfff857b0</font></p>
<p><font face="Arial" size="2">start 0xfff85800 len 1 reallen 194976
compression 3 entry 0x00002048 loadaddress 0x00016780</font></p>
<p><font face="Arial" size="2">LAR: Compression algorithm #3 (zeroes)
used</font></p>
<p><font face="Arial" size="2">LAR: Attempting to open
'normal/stage2/segment1'.</font></p>
<p><font face="Arial" size="2">LAR: Start 0xfff80000 len 0x80000</font></p>
<p><font face="Arial" size="2">LAR: seen member
normal/option_table@0xfff80000, size 984</font></p>
<p><font face="Arial" size="2">LAR: seen member
normal/initram/segment0@0xfff80430, size 21284</font></p>
<p><font face="Arial" size="2">LAR: seen member
normal/stage2/segment0@0xfff857b0, size 1</font></p>
<p><font face="Arial" size="2">LAR: seen member
normal/stage2/segment1@0xfff85810, size 25731</font></p>
<p><font face="Arial" size="2">LAR: CHECK normal/stage2/segment1 @
0xfff85810</font></p>
<p><font face="Arial" size="2">start 0xfff85860 len 25731 reallen
53312 compression 1 entry 0x00002048 loadaddress 0x00002000</font></p>
<p><font face="Arial" size="2">LAR: Compression algorithm #1 (lzma)
used</font></p>
<p><font face="Arial" size="2">LAR: Attempting to open
'normal/stage2/segment2'.</font></p>
<p><font face="Arial" size="2">LAR: Start 0xfff80000 len 0x80000</font></p>
<p><font face="Arial" size="2">LAR: seen member
normal/option_table@0xfff80000, size 984</font></p>
<p><font face="Arial" size="2">LAR: seen member
normal/initram/segment0@0xfff80430, size 21284</font></p>
<p><font face="Arial" size="2">LAR: seen member
normal/stage2/segment0@0xfff857b0, size 1</font></p>
<p><font face="Arial" size="2">LAR: seen member
normal/stage2/segment1@0xfff85810, size 25731</font></p>
<p><font face="Arial" size="2">LAR: seen member
normal/stage2/segment2@0xfff8bcf0, size 999</font></p>
<p><font face="Arial" size="2">LAR: CHECK normal/stage2/segment2 @
0xfff8bcf0</font></p>
<p><font face="Arial" size="2">start 0xfff8bd40 len 999 reallen 26420
compression 1 entry 0x00002048 loadaddress 0x00010040</font></p>
<p><font face="Arial" size="2">LAR: Compression algorithm #1 (lzma)
used</font></p>
<p><font face="Arial" size="2">LAR: Attempting to open
'normal/stage2/segment3'.</font></p>
<p><font face="Arial" size="2">LAR: Start 0xfff80000 len 0x80000</font></p>
<p><font face="Arial" size="2">LAR: seen member
normal/option_table@0xfff80000, size 984</font></p>
<p><font face="Arial" size="2">LAR: seen member
normal/initram/segment0@0xfff80430, size 21284</font></p>
<p><font face="Arial" size="2">LAR: seen member
normal/stage2/segment0@0xfff857b0, size 1</font></p>
<p><font face="Arial" size="2">LAR: seen member
normal/stage2/segment1@0xfff85810, size 25731</font></p>
<p><font face="Arial" size="2">LAR: seen member
normal/stage2/segment2@0xfff8bcf0, size 999</font></p>
<p><font face="Arial" size="2">LAR: seen member
normal/payload/segment0@0xfff8c130, size 1</font></p>
<p><font face="Arial" size="2">LAR: seen member
normal/payload/segment1@0xfff8c190, size 40402</font></p>
<p><font face="Arial" size="2">LAR: seen member
normal/payload/segment2@0xfff95fc0, size 47</font></p>
<p><font face="Arial" size="2">LAR: seen member bootblock@0xffffafc0,
size 20480</font></p>
<p><font face="Arial" size="2">LAR: File not found!</font></p>
<p><font face="Arial" size="2">LAR: load_file: No such file
'normal/stage2/segment3'</font></p>
<p><font face="Arial" size="2">LAR: load_file_segments: All loaded,
entry 0x00002048</font></p>
<p><font face="Arial" size="2">resets at this point . </font></p>
<p><span class="481394312-31032009"><font face="Arial" size="2">Best
Regards,</font></span></p>
<p><span class="481394312-31032009"><font face="Arial" size="2">Vadim</font></span></p>
</span></div>
<table id="28FCE90E-9FBC-44da-BBF7-D3997DC20E83" align="center"
border="0">
<tbody>
<tr>
<td style="border-bottom: 1px solid silver;"> </td>
</tr>
<tr>
<td align="center"> <a moz-do-not-send="true" href=""
target="_blank"><img src="cid:part1.04080903.03000501@coresystems.de"
border="0"></a> <br>
<a moz-do-not-send="true"
name="28FCE90E-9FBC-44da-BBF7-D3997DC20E83"
href="http://admailltd.vpscustomer.com/redirect/admail.htm"><i><font
style="text-decoration: none;" color="Gray" face="Arial" size="1">powered
by admail</font></i></a> </td>
</tr>
</tbody>
</table>
<br>
<br>
<br>
<br>
************************************************************************************<br>
This footnote confirms that this email message has been scanned by<br>
PineApp Mail-SeCure for the presence of malicious code, vandals &
computer viruses.<br>
************************************************************************************<br>
<br>
<br>
</blockquote>
<br>
<br>
<pre class="moz-signature" cols="72">--
coresystems GmbH • Brahmsstr. 16 • D-79104 Freiburg i. Br.
Tel.: +49 761 7668825 • Fax: +49 761 7664613
Email: <a class="moz-txt-link-abbreviated" href="mailto:info@coresystems.de">info@coresystems.de</a> • <a class="moz-txt-link-freetext" href="http://www.coresystems.de/">http://www.coresystems.de/</a>
Registergericht: Amtsgericht Freiburg • HRB 7656
Geschäftsführer: Stefan Reinauer • Ust-IdNr.: DE245674866
</pre>
</body>
</html>