<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">
<HTML><HEAD>
<META http-equiv=Content-Type content="text/html; charset=us-ascii">
<META content="MSHTML 6.00.6000.16809" name=GENERATOR></HEAD>
<BODY>
<DIV><SPAN lang=EN>
<P><FONT face=Arial size=2>coreboot-3.0.1161 Wed Mar 25 11:26:19 EDT 2009
starting... (console_loglevel=8)</FONT></P>
<P><FONT face=Arial size=2>Choosing fallback boot.</FONT></P>
<P><FONT face=Arial size=2>LAR: Attempting to open
'fallback/initram/segment0'.</FONT></P>
<P><FONT face=Arial size=2>LAR: Start 0xfff80000 len 0x80000</FONT></P>
<P><FONT face=Arial size=2>LAR: seen member normal/option_table@0xfff80000, size
984</FONT></P>
<P><FONT face=Arial size=2>LAR: seen member normal/initram/segment0@0xfff80430,
size 21284</FONT></P>
<P><FONT face=Arial size=2>LAR: seen member normal/stage2/segment0@0xfff857b0,
size 1</FONT></P>
<P><FONT face=Arial size=2>LAR: seen member normal/stage2/segment1@0xfff85810,
size 25731</FONT></P>
<P><FONT face=Arial size=2>LAR: seen member normal/stage2/segment2@0xfff8bcf0,
size 999</FONT></P>
<P><FONT face=Arial size=2>LAR: seen member normal/payload/segment0@0xfff8c130,
size 1</FONT></P>
<P><FONT face=Arial size=2>LAR: seen member normal/payload/segment1@0xfff8c190,
size 40402</FONT></P>
<P><FONT face=Arial size=2>LAR: seen member normal/payload/segment2@0xfff95fc0,
size 47</FONT></P>
<P><FONT face=Arial size=2>LAR: seen member bootblock@0xffffafc0, size
20480</FONT></P>
<P><FONT face=Arial size=2>LAR: File not found!</FONT></P>
<P><FONT face=Arial size=2>LAR: Run file fallback/initram/segment0 failed: No
such file.</FONT></P>
<P><FONT face=Arial size=2>Fallback failed. Try normal boot</FONT></P>
<P><FONT face=Arial size=2>LAR: Attempting to open
'normal/initram/segment0'.</FONT></P>
<P><FONT face=Arial size=2>LAR: Start 0xfff80000 len 0x80000</FONT></P>
<P><FONT face=Arial size=2>LAR: seen member normal/option_table@0xfff80000, size
984</FONT></P>
<P><FONT face=Arial size=2>LAR: seen member normal/initram/segment0@0xfff80430,
size 21284</FONT></P>
<P><FONT face=Arial size=2>LAR: CHECK normal/initram/segment0 @
0xfff80430</FONT></P>
<P><FONT face=Arial size=2>start 0xfff80480 len 21284 reallen 21284 compression
0 entry 0x0000391f loadaddress 0x00000000</FONT></P>
<P><FONT face=Arial size=2>Entry point is 0xfff83d9f</FONT></P>
<P><FONT face=Arial size=2>Hi there from stage1, cpu0, core0</FONT></P>
<P><FONT face=Arial size=2>Mobile Intel(R) 945GM/GME Express Chipset</FONT></P>
<P><FONT face=Arial size=2>(G)MCH capable of up to FSB 800 MHz</FONT></P>
<P><FONT face=Arial size=2>(G)MCH capable of up to DDR2-667</FONT></P>
<P><FONT face=Arial size=2>Setting up static southbridge registers... GPIOS...
done.</FONT></P>
<P><FONT face=Arial size=2>Disabling Watchdog reboot... done.</FONT></P>
<P><FONT face=Arial size=2>Setting up static northbridge registers...
done.</FONT></P>
<P><FONT face=Arial size=2>Waiting for MCHBAR to come up...ok</FONT></P>
<P><FONT face=Arial size=2>SMBus controller enabled.</FONT></P>
<P><FONT face=Arial size=2>Setting up RAM controller.</FONT></P>
<P><FONT face=Arial size=2>SDRAM_CAPABILITIES_DUAL_CHENAL =
0x00000000</FONT></P>
<P><FONT face=Arial size=2>This mainboard supports only Single Channel
Operation.</FONT></P>
<P><FONT face=Arial size=2>SDRAM_CAPABILITIES_DUAL_CHENAL =
0x00000000</FONT></P>
<P><FONT face=Arial size=2>DDR II Channel 0 Socket 0: x8DDS</FONT></P>
<P><FONT face=Arial size=2>SDRAM_CAPABILITIES_DUAL_CHENAL =
0x00000000</FONT></P>
<P><FONT face=Arial size=2>lowest common cas = 3</FONT></P>
<P><FONT face=Arial size=2>Probing Speed 2</FONT></P>
<P><FONT face=Arial size=2>DIMM: 0</FONT></P>
<P><FONT face=Arial size=2>Current CAS mask: 0038; idx=2, tCLK=50, tAC=60: Not
fast enough!</FONT></P>
<P><FONT face=Arial size=2>Current CAS mask: 0030; idx=1, tCLK=3d, tAC=50: Not
fast enough!</FONT></P>
<P><FONT face=Arial size=2>Current CAS mask: 0020; idx=0, tCLK=30, tAC=45:
OK</FONT></P>
<P><FONT face=Arial size=2>DIMM: 1</FONT></P>
<P><FONT face=Arial size=2>freq_cas_mask for speed 2: 0020</FONT></P>
<P><FONT face=Arial size=2>Memory will be driven at 667MHz with CAS=5
clocks</FONT></P>
<P><FONT face=Arial size=2>tRAS = 15 cycles</FONT></P>
<P><FONT face=Arial size=2>tRP = 5 cycles</FONT></P>
<P><FONT face=Arial size=2>tRCD = 5 cycles</FONT></P>
<P><FONT face=Arial size=2>Refresh: 7.8us</FONT></P>
<P><FONT face=Arial size=2>tWR = 5 cycles</FONT></P>
<P><FONT face=Arial size=2>DIMM 0 side 0 = 512 MB</FONT></P>
<P><FONT face=Arial size=2>DIMM 0 side 1 = 512 MB</FONT></P>
<P><FONT face=Arial size=2>tRFC = 35 cycles</FONT></P>
<P><FONT face=Arial size=2>Setting Graphics Frequency... </FONT></P>
<P><FONT face=Arial size=2>Setting Memory Frequency... CLKCFG=0x00010023,
CLKCFG=0x00010043, ok</FONT></P>
<P><FONT face=Arial size=2>Setting mode of operation for memory
channels...SDRAM_CAPABILITIES_DUAL_CHENAL = 0x00000000</FONT></P>
<P><FONT face=Arial size=2>Single Channel 0 only.</FONT></P>
<P><FONT face=Arial size=2>DCC=0x00000400</FONT></P>
<P><FONT face=Arial size=2>Programming Clock Crossing...MEM=667 FSB=667...
ok</FONT></P>
<P><FONT face=Arial size=2>Setting RAM size... </FONT></P>
<P><FONT face=Arial size=2>C0DRB = 0x00002010</FONT></P>
<P><FONT face=Arial size=2>C1DRB = 0x00000000</FONT></P>
<P><FONT face=Arial size=2>TOLUD = 0x70</FONT></P>
<P><FONT face=Arial size=2>Setting row attributes... </FONT></P>
<P><FONT face=Arial size=2>C0DRA = 0x0033</FONT></P>
<P><FONT face=Arial size=2>C1DRA = 0x0000</FONT></P>
<P><FONT face=Arial size=2>one dimm per channel config.. </FONT></P>
<P><FONT face=Arial size=2>Initializing System Memory IO... </FONT></P>
<P><FONT face=Arial size=2>SDRAM_CAPABILITIES_DUAL_CHENAL =
0x00000000</FONT></P>
<P><FONT face=Arial size=2>SDRAM_CAPABILITIES_DUAL_CHENAL =
0x00000000</FONT></P>
<P><FONT face=Arial size=2>Programming Single Channel RCOMP</FONT></P>
<P><FONT face=Arial size=2>Table Index: 19</FONT></P>
<P><FONT face=Arial size=2>Programming DLL Timings... </FONT></P>
<P><FONT face=Arial size=2>Enabling System Memory IO... </FONT></P>
<P><FONT face=Arial size=2>jedec enable sequence: bank 0</FONT></P>
<P><FONT face=Arial size=2>Apply NOP</FONT></P>
<P><FONT face=Arial size=2>Sending RAM command 0x00010400...done</FONT></P>
<P><FONT face=Arial size=2>ram read: 00000000</FONT></P>
<P><FONT face=Arial size=2>All Banks Precharge</FONT></P>
<P><FONT face=Arial size=2>Sending RAM command 0x00020400...done</FONT></P>
<P><FONT face=Arial size=2>ram read: 00000000</FONT></P>
<P><FONT face=Arial size=2>Extended Mode Register Set(2)</FONT></P>
<P><FONT face=Arial size=2>Sending RAM command 0x00240400...done</FONT></P>
<P><FONT face=Arial size=2>ram read: 00000000</FONT></P>
<P><FONT face=Arial size=2>Extended Mode Register Set(3)</FONT></P>
<P><FONT face=Arial size=2>Sending RAM command 0x00440400...done</FONT></P>
<P><FONT face=Arial size=2>ram read: 00000000</FONT></P>
<P><FONT face=Arial size=2>Extended Mode Register Set</FONT></P>
<P><FONT face=Arial size=2>Sending RAM command 0x00040400...done</FONT></P>
<P><FONT face=Arial size=2>SDRAM_CAPABILITIES_DUAL_CHENAL =
0x00000000</FONT></P>
<P><FONT face=Arial size=2>ram read: 00000020</FONT></P>
<P><FONT face=Arial size=2>MRS: Reset DLLs</FONT></P>
<P><FONT face=Arial size=2>Sending RAM command 0x00030400...done</FONT></P>
<P><FONT face=Arial size=2>ram read: 00004a98</FONT></P>
<P><FONT face=Arial size=2>All Banks Precharge</FONT></P>
<P><FONT face=Arial size=2>Sending RAM command 0x00020400...done</FONT></P>
<P><FONT face=Arial size=2>ram read: 00000000</FONT></P>
<P><FONT face=Arial size=2>CAS before RAS</FONT></P>
<P><FONT face=Arial size=2>Sending RAM command 0x00060400...done</FONT></P>
<P><FONT face=Arial size=2>ram read: 00000000</FONT></P>
<P><FONT face=Arial size=2>ram read: 00000000</FONT></P>
<P><FONT face=Arial size=2>MRS: Enable DLLs</FONT></P>
<P><FONT face=Arial size=2>Sending RAM command 0x00030400...done</FONT></P>
<P><FONT face=Arial size=2>ram read: 00004298</FONT></P>
<P><FONT face=Arial size=2>Extended Mode Register Set: ODT/OCD</FONT></P>
<P><FONT face=Arial size=2>Sending RAM command 0x00040400...done</FONT></P>
<P><FONT face=Arial size=2>SDRAM_CAPABILITIES_DUAL_CHENAL =
0x00000000</FONT></P>
<P><FONT face=Arial size=2>ram read: 00001c20</FONT></P>
<P><FONT face=Arial size=2>Extended Mode Register Set: OCD Exit</FONT></P>
<P><FONT face=Arial size=2>Sending RAM command 0x00040400...done</FONT></P>
<P><FONT face=Arial size=2>SDRAM_CAPABILITIES_DUAL_CHENAL =
0x00000000</FONT></P>
<P><FONT face=Arial size=2>ram read: 00000020</FONT></P>
<P><FONT face=Arial size=2>jedec enable sequence: bank 1</FONT></P>
<P><FONT face=Arial size=2>bankaddr from bank size of rank 0</FONT></P>
<P><FONT face=Arial size=2>Apply NOP</FONT></P>
<P><FONT face=Arial size=2>Sending RAM command 0x00010400...done</FONT></P>
<P><FONT face=Arial size=2>ram read: 20000000</FONT></P>
<P><FONT face=Arial size=2>All Banks Precharge</FONT></P>
<P><FONT face=Arial size=2>Sending RAM command 0x00020400...done</FONT></P>
<P><FONT face=Arial size=2>ram read: 20000000</FONT></P>
<P><FONT face=Arial size=2>Extended Mode Register Set(2)</FONT></P>
<P><FONT face=Arial size=2>Sending RAM command 0x00240400...done</FONT></P>
<P><FONT face=Arial size=2>ram read: 20000000</FONT></P>
<P><FONT face=Arial size=2>Extended Mode Register Set(3)</FONT></P>
<P><FONT face=Arial size=2>Sending RAM command 0x00440400...done</FONT></P>
<P><FONT face=Arial size=2>ram read: 20000000</FONT></P>
<P><FONT face=Arial size=2>Extended Mode Register Set</FONT></P>
<P><FONT face=Arial size=2>Sending RAM command 0x00040400...done</FONT></P>
<P><FONT face=Arial size=2>SDRAM_CAPABILITIES_DUAL_CHENAL =
0x00000000</FONT></P>
<P><FONT face=Arial size=2>ram read: 20000020</FONT></P>
<P><FONT face=Arial size=2>MRS: Reset DLLs</FONT></P>
<P><FONT face=Arial size=2>Sending RAM command 0x00030400...done</FONT></P>
<P><FONT face=Arial size=2>ram read: 20004a98</FONT></P>
<P><FONT face=Arial size=2>All Banks Precharge</FONT></P>
<P><FONT face=Arial size=2>Sending RAM command 0x00020400...done</FONT></P>
<P><FONT face=Arial size=2>ram read: 20000000</FONT></P>
<P><FONT face=Arial size=2>CAS before RAS</FONT></P>
<P><FONT face=Arial size=2>Sending RAM command 0x00060400...done</FONT></P>
<P><FONT face=Arial size=2>ram read: 20000000</FONT></P>
<P><FONT face=Arial size=2>ram read: 20000000</FONT></P>
<P><FONT face=Arial size=2>MRS: Enable DLLs</FONT></P>
<P><FONT face=Arial size=2>Sending RAM command 0x00030400...done</FONT></P>
<P><FONT face=Arial size=2>ram read: 20004298</FONT></P>
<P><FONT face=Arial size=2>Extended Mode Register Set: ODT/OCD</FONT></P>
<P><FONT face=Arial size=2>Sending RAM command 0x00040400...done</FONT></P>
<P><FONT face=Arial size=2>SDRAM_CAPABILITIES_DUAL_CHENAL =
0x00000000</FONT></P>
<P><FONT face=Arial size=2>ram read: 20001c20</FONT></P>
<P><FONT face=Arial size=2>Extended Mode Register Set: OCD Exit</FONT></P>
<P><FONT face=Arial size=2>Sending RAM command 0x00040400...done</FONT></P>
<P><FONT face=Arial size=2>SDRAM_CAPABILITIES_DUAL_CHENAL =
0x00000000</FONT></P>
<P><FONT face=Arial size=2>ram read: 20000020</FONT></P>
<P><FONT face=Arial size=2>jedec enable sequence: bank 4</FONT></P>
<P><FONT face=Arial size=2>bankaddr from bank size of rank 1</FONT></P>
<P><FONT face=Arial size=2>Apply NOP</FONT></P>
<P><FONT face=Arial size=2>Sending RAM command 0x00010400...done</FONT></P>
<P><FONT face=Arial size=2>ram read: 40000000</FONT></P>
<P><FONT face=Arial size=2>All Banks Precharge</FONT></P>
<P><FONT face=Arial size=2>Sending RAM command 0x00020400...done</FONT></P>
<P><FONT face=Arial size=2>ram read: 40000000</FONT></P>
<P><FONT face=Arial size=2>Extended Mode Register Set(2)</FONT></P>
<P><FONT face=Arial size=2>Sending RAM command 0x00240400...done</FONT></P>
<P><FONT face=Arial size=2>ram read: 40000000</FONT></P>
<P><FONT face=Arial size=2>Extended Mode Register Set(3)</FONT></P>
<P><FONT face=Arial size=2>Sending RAM command 0x00440400...done</FONT></P>
<P><FONT face=Arial size=2>ram read: 40000000</FONT></P>
<P><FONT face=Arial size=2>Extended Mode Register Set</FONT></P>
<P><FONT face=Arial size=2>Sending RAM command 0x00040400...done</FONT></P>
<P><FONT face=Arial size=2>SDRAM_CAPABILITIES_DUAL_CHENAL =
0x00000000</FONT></P>
<P><FONT face=Arial size=2>ram read: 40000020</FONT></P>
<P><FONT face=Arial size=2>MRS: Reset DLLs</FONT></P>
<P><FONT face=Arial size=2>Sending RAM command 0x00030400...done</FONT></P>
<P><FONT face=Arial size=2>ram read: 40004a98</FONT></P>
<P><FONT face=Arial size=2>All Banks Precharge</FONT></P>
<P><FONT face=Arial size=2>Sending RAM command 0x00020400...done</FONT></P>
<P><FONT face=Arial size=2>ram read: 40000000</FONT></P>
<P><FONT face=Arial size=2>CAS before RAS</FONT></P>
<P><FONT face=Arial size=2>Sending RAM command 0x00060400...done</FONT></P>
<P><FONT face=Arial size=2>ram read: 40000000</FONT></P>
<P><FONT face=Arial size=2>ram read: 40000000</FONT></P>
<P><FONT face=Arial size=2>MRS: Enable DLLs</FONT></P>
<P><FONT face=Arial size=2>Sending RAM command 0x00030400...done</FONT></P>
<P><FONT face=Arial size=2>ram read: 40004298</FONT></P>
<P><FONT face=Arial size=2>Extended Mode Register Set: ODT/OCD</FONT></P>
<P><FONT face=Arial size=2>Sending RAM command 0x00040400...done</FONT></P>
<P><FONT face=Arial size=2>SDRAM_CAPABILITIES_DUAL_CHENAL =
0x00000000</FONT></P>
<P><FONT face=Arial size=2>ram read: 40001c20</FONT></P>
<P><FONT face=Arial size=2>Extended Mode Register Set: OCD Exit</FONT></P>
<P><FONT face=Arial size=2>Sending RAM command 0x00040400...done</FONT></P>
<P><FONT face=Arial size=2>SDRAM_CAPABILITIES_DUAL_CHENAL =
0x00000000</FONT></P>
<P><FONT face=Arial size=2>ram read: 40000020</FONT></P>
<P><FONT face=Arial size=2>Normal Operation</FONT></P>
<P><FONT face=Arial size=2>Sending RAM command 0x000f0400...done</FONT></P>
<P><FONT face=Arial size=2>receive_enable_autoconfig() for channel 0</FONT></P>
<P><FONT face=Arial size=2>find_strobes_low()</FONT></P>
<P><FONT face=Arial size=2>set_receive_enable() medium=0x3,
coarse=0x5</FONT></P>
<P><FONT face=Arial size=2>set_receive_enable() medium=0x1,
coarse=0x5</FONT></P>
<P><FONT face=Arial size=2>find_strobes_edge()</FONT></P>
<P><FONT face=Arial size=2>set_receive_enable() medium=0x1,
coarse=0x5</FONT></P>
<P><FONT face=Arial size=2>add_quarter_clock() mediumcoarse=15
fine=d7</FONT></P>
<P><FONT face=Arial size=2>set_receive_enable() medium=0x3,
coarse=0x5</FONT></P>
<P><FONT face=Arial size=2>find_preamble()</FONT></P>
<P><FONT face=Arial size=2>set_receive_enable() medium=0x3,
coarse=0x4</FONT></P>
<P><FONT face=Arial size=2>set_receive_enable() medium=0x3,
coarse=0x3</FONT></P>
<P><FONT face=Arial size=2>add_quarter_clock() mediumcoarse=0f
fine=57</FONT></P>
<P><FONT face=Arial size=2>normalize()</FONT></P>
<P><FONT face=Arial size=2>RAM initialization finished.</FONT></P>
<P><FONT face=Arial size=2>Setting up Egress Port RCRB</FONT></P>
<P><FONT face=Arial size=2>Loading port arbitration table ...ok</FONT></P>
<P><FONT face=Arial size=2>Wait for VC1 negotiation ...ok</FONT></P>
<P><FONT face=Arial size=2>Setting up DMI RCRB</FONT></P>
<P><FONT face=Arial size=2>Wait for VC1 negotiation ...timeout!</FONT></P>
<P><FONT face=Arial size=2>Waiting for DMI hardware...ok</FONT></P>
<P><FONT face=Arial size=2>Disabling PCI Express x16 Link</FONT></P>
<P><FONT face=Arial size=2>Wait for link to enter detect state... ok</FONT></P>
<P><FONT face=Arial size=2>Setting up Root Complex Topology</FONT></P>
<P><FONT face=Arial size=2>run_file returns with 0</FONT></P>
<P><FONT face=Arial size=2>Done RAM init code</FONT></P>
<P><FONT face=Arial size=2>Done printk() buffer move</FONT></P>
<P><FONT face=Arial size=2>disable_car entry</FONT></P>
<P><FONT face=Arial size=2>disable_car global_vars copy done</FONT></P>
<P><FONT face=Arial size=2>NEWLOCATION = 0x00088fc8</FONT></P>
<P><FONT face=Arial size=2>disable_car global_vars pointer adjusted</FONT></P>
<P><FONT face=Arial size=2>entering asm code now</FONT></P>
<P><FONT face=Arial size=2>LAR: Attempting to open
'normal/stage2/segment0'.</FONT></P>
<P><FONT face=Arial size=2>LAR: Start 0xfff80000 len 0x80000</FONT></P>
<P><FONT face=Arial size=2>LAR: seen member normal/option_table@0xfff80000, size
984</FONT></P>
<P><FONT face=Arial size=2>LAR: seen member normal/initram/segment0@0xfff80430,
size 21284</FONT></P>
<P><FONT face=Arial size=2>LAR: seen member normal/stage2/segment0@0xfff857b0,
size 1</FONT></P>
<P><FONT face=Arial size=2>LAR: CHECK normal/stage2/segment0 @
0xfff857b0</FONT></P>
<P><FONT face=Arial size=2>start 0xfff85800 len 1 reallen 194976 compression 3
entry 0x00002048 loadaddress 0x00016780</FONT></P>
<P><FONT face=Arial size=2>LAR: Compression algorithm #3 (zeroes)
used</FONT></P>
<P><FONT face=Arial size=2>LAR: Attempting to open
'normal/stage2/segment1'.</FONT></P>
<P><FONT face=Arial size=2>LAR: Start 0xfff80000 len 0x80000</FONT></P>
<P><FONT face=Arial size=2>LAR: seen member normal/option_table@0xfff80000, size
984</FONT></P>
<P><FONT face=Arial size=2>LAR: seen member normal/initram/segment0@0xfff80430,
size 21284</FONT></P>
<P><FONT face=Arial size=2>LAR: seen member normal/stage2/segment0@0xfff857b0,
size 1</FONT></P>
<P><FONT face=Arial size=2>LAR: seen member normal/stage2/segment1@0xfff85810,
size 25731</FONT></P>
<P><FONT face=Arial size=2>LAR: CHECK normal/stage2/segment1 @
0xfff85810</FONT></P>
<P><FONT face=Arial size=2>start 0xfff85860 len 25731 reallen 53312 compression
1 entry 0x00002048 loadaddress 0x00002000</FONT></P>
<P><FONT face=Arial size=2>LAR: Compression algorithm #1 (lzma) used</FONT></P>
<P><FONT face=Arial size=2>LAR: Attempting to open
'normal/stage2/segment2'.</FONT></P>
<P><FONT face=Arial size=2>LAR: Start 0xfff80000 len 0x80000</FONT></P>
<P><FONT face=Arial size=2>LAR: seen member normal/option_table@0xfff80000, size
984</FONT></P>
<P><FONT face=Arial size=2>LAR: seen member normal/initram/segment0@0xfff80430,
size 21284</FONT></P>
<P><FONT face=Arial size=2>LAR: seen member normal/stage2/segment0@0xfff857b0,
size 1</FONT></P>
<P><FONT face=Arial size=2>LAR: seen member normal/stage2/segment1@0xfff85810,
size 25731</FONT></P>
<P><FONT face=Arial size=2>LAR: seen member normal/stage2/segment2@0xfff8bcf0,
size 999</FONT></P>
<P><FONT face=Arial size=2>LAR: CHECK normal/stage2/segment2 @
0xfff8bcf0</FONT></P>
<P><FONT face=Arial size=2>start 0xfff8bd40 len 999 reallen 26420 compression 1
entry 0x00002048 loadaddress 0x00010040</FONT></P>
<P><FONT face=Arial size=2>LAR: Compression algorithm #1 (lzma) used</FONT></P>
<P><FONT face=Arial size=2>LAR: Attempting to open
'normal/stage2/segment3'.</FONT></P>
<P><FONT face=Arial size=2>LAR: Start 0xfff80000 len 0x80000</FONT></P>
<P><FONT face=Arial size=2>LAR: seen member normal/option_table@0xfff80000, size
984</FONT></P>
<P><FONT face=Arial size=2>LAR: seen member normal/initram/segment0@0xfff80430,
size 21284</FONT></P>
<P><FONT face=Arial size=2>LAR: seen member normal/stage2/segment0@0xfff857b0,
size 1</FONT></P>
<P><FONT face=Arial size=2>LAR: seen member normal/stage2/segment1@0xfff85810,
size 25731</FONT></P>
<P><FONT face=Arial size=2>LAR: seen member normal/stage2/segment2@0xfff8bcf0,
size 999</FONT></P>
<P><FONT face=Arial size=2>LAR: seen member normal/payload/segment0@0xfff8c130,
size 1</FONT></P>
<P><FONT face=Arial size=2>LAR: seen member normal/payload/segment1@0xfff8c190,
size 40402</FONT></P>
<P><FONT face=Arial size=2>LAR: seen member normal/payload/segment2@0xfff95fc0,
size 47</FONT></P>
<P><FONT face=Arial size=2>LAR: seen member bootblock@0xffffafc0, size
20480</FONT></P>
<P><FONT face=Arial size=2>LAR: File not found!</FONT></P>
<P><FONT face=Arial size=2>LAR: load_file: No such file
'normal/stage2/segment3'</FONT></P>
<P><FONT face=Arial size=2>LAR: load_file_segments: All loaded, entry
0x00002048</FONT></P>
<P><FONT face=Arial size=2>resets at this point . </FONT></P>
<P><SPAN class=481394312-31032009><FONT face=Arial size=2>Best
Regards,</FONT></SPAN></P>
<P><SPAN class=481394312-31032009><FONT face=Arial
size=2>Vadim</FONT></SPAN></P></SPAN></DIV>
<table border="0" align="center" id="28FCE90E-9FBC-44da-BBF7-D3997DC20E83">
<tr>
<td style="BORDER-BOTTOM: silver 1px solid"> </td>
</tr>
<tr>
<td align="center">
<a href='' target='_blank'><img src='cid:AdmailImg1' border='0'></a>
<br />
<a name="28FCE90E-9FBC-44da-BBF7-D3997DC20E83" href="http://admailltd.vpscustomer.com/redirect/admail.htm"><i><font face="Arial" color="Gray" size="1" style="TEXT-DECORATION: none">powered by admail</font></i></a>
</td>
</tr>
</table></BODY></HTML>
<BR>
<BR>
<BR>
<BR>
************************************************************************************<BR>
This footnote confirms that this email message has been scanned by<BR>
PineApp Mail-SeCure for the presence of malicious code, vandals & computer viruses.<BR>
************************************************************************************<BR>
<BR>
<BR>