Index: LinuxBIOSv2-k8_raminit_debugmessages_fix/src/northbridge/amd/amdk8/raminit.c
===================================================================
--- LinuxBIOSv2-k8_raminit_debugmessages_fix/src/northbridge/amd/amdk8/raminit.c	(Revision 4341)
+++ LinuxBIOSv2-k8_raminit_debugmessages_fix/src/northbridge/amd/amdk8/raminit.c	(Arbeitskopie)
@@ -855,12 +855,12 @@
 	/* Now set top of memory */
 	msr_t msr;
 	if (tom_k > (4*1024*1024)) {
-		printk_raminit("Handling memory mapped above 4 GB\n");
-		printk_raminit("Upper RAM end at 0x%08x kB\n", tom_k);
+		printk_spew("Handling memory mapped above 4 GB\n");
+		printk_spew("Upper RAM end at 0x%08x kB\n", tom_k);
 		msr.lo = (tom_k & 0x003fffff) << 10;
 		msr.hi = (tom_k & 0xffc00000) >> 22;
 		wrmsr(TOP_MEM2, msr);
-		printk_raminit("Correcting memory amount mapped below 4 GB\n");
+		printk_spew("Correcting memory amount mapped below 4 GB\n");
 	}
 
 	/* Leave a 64M hole between TOP_MEM and TOP_MEM2
@@ -873,9 +873,9 @@
 		} else
 #endif
 		tom_k = 0x3f0000;
-		printk_raminit("Adjusting lower RAM end\n");
+		printk_spew("Adjusting lower RAM end\n");
 	}
-	printk_raminit("Lower RAM end at 0x%08x kB\n", tom_k);
+	printk_spew("Lower RAM end at 0x%08x kB\n", tom_k);
 	msr.lo = (tom_k & 0x003fffff) << 10;
 	msr.hi = (tom_k & 0xffc00000) >> 22;
 	wrmsr(TOP_MEM, msr);
@@ -2106,7 +2106,7 @@
 	return;
  hw_spd_err:
 	/* Unrecoverable error reading SPD data */
-	print_err("SPD error - reset\n");
+	printk_err("SPD error - reset\n");
 	hard_reset();
 	return;
 }
@@ -2172,7 +2172,7 @@
 
 	hole_startk = 4*1024*1024 - HW_MEM_HOLE_SIZEK;
 
-	printk_raminit("Handling memory hole at 0x%08x (default)\n", hole_startk);
+	printk_spew("Handling memory hole at 0x%08x (default)\n", hole_startk);
 #if HW_MEM_HOLE_SIZE_AUTO_INC == 1
 	/* We need to double check if hole_startk is valid.
 	 * If it is equal to the dram base address in K (base_k),
@@ -2197,7 +2197,7 @@
 			basek_pri = base_k;
 	}
 
-	printk_raminit("Handling memory hole at 0x%08x (adjusted)\n", hole_startk);
+	printk_spew("Handling memory hole at 0x%08x (adjusted)\n", hole_startk);
 #endif
 	/* Find node number that needs the memory hole configured */
 	for (i=0; i<controllers; i++) {
