Index: flashrom-ftdi2232_spi/flash.h
===================================================================
--- flashrom-ftdi2232_spi/flash.h	(Revision 597)
+++ flashrom-ftdi2232_spi/flash.h	(Arbeitskopie)
@@ -86,6 +86,7 @@
 #define PROGRAMMER_NIC3COM	0x02
 #define PROGRAMMER_SATASII	0x03
 #define PROGRAMMER_IT87SPI	0x04
+#define PROGRAMMER_FT2232SPI	0x05
 
 struct programmer_entry {
 	const char *vendor;
@@ -358,6 +359,13 @@
 uint8_t satasii_chip_readb(const chipaddr addr);
 extern struct pcidev_status satas_sii[];
 
+/* ft2232_spi.c */
+int ft2232_spi_init(void);
+int ft2232_spi_command(unsigned int writecnt, unsigned int readcnt, const unsigned char *writearr, unsigned char *readarr);
+int ft2232_spi_read(struct flashchip *flash, uint8_t *buf, int start, int len);
+int ft2232_spi_write1(struct flashchip *flash, uint8_t *buf);
+int ft2232_spi_write_256(struct flashchip *flash, uint8_t *buf);
+
 /* flashrom.c */
 extern int verbose;
 #define printf_debug(x...) { if (verbose) printf(x); }
@@ -388,6 +396,7 @@
 	SPI_CONTROLLER_SB600,
 	SPI_CONTROLLER_VIA,
 	SPI_CONTROLLER_WBSIO,
+	SPI_CONTROLLER_FT2232,
 	SPI_CONTROLLER_DUMMY,
 };
 extern enum spi_controller spi_controller;
Index: flashrom-ftdi2232_spi/spi.c
===================================================================
--- flashrom-ftdi2232_spi/spi.c	(Revision 597)
+++ flashrom-ftdi2232_spi/spi.c	(Arbeitskopie)
@@ -47,6 +47,8 @@
 		return sb600_spi_command(writecnt, readcnt, writearr, readarr);
 	case SPI_CONTROLLER_WBSIO:
 		return wbsio_spi_command(writecnt, readcnt, writearr, readarr);
+	case SPI_CONTROLLER_FT2232:
+		return ft2232_spi_command(writecnt, readcnt, writearr, readarr);
 	case SPI_CONTROLLER_DUMMY:
 		return dummy_spi_command(writecnt, readcnt, writearr, readarr);
 	default:
@@ -212,6 +214,7 @@
 	case SPI_CONTROLLER_VIA:
 	case SPI_CONTROLLER_SB600:
 	case SPI_CONTROLLER_WBSIO:
+	case SPI_CONTROLLER_FT2232:
 	case SPI_CONTROLLER_DUMMY:
 		return probe_spi_rdid_generic(flash, 4);
 	default:
@@ -726,6 +729,8 @@
 		return ich_spi_read(flash, buf, start, len);
 	case SPI_CONTROLLER_WBSIO:
 		return wbsio_spi_read(flash, buf, start, len);
+	case SPI_CONTROLLER_FT2232:
+		return ft2232_spi_read(flash, buf, start, len);
 	default:
 		printf_debug
 		    ("%s called, but no SPI chipset/strapping detected\n",
@@ -774,6 +779,8 @@
 		return ich_spi_write_256(flash, buf);
 	case SPI_CONTROLLER_WBSIO:
 		return wbsio_spi_write_1(flash, buf);
+	case SPI_CONTROLLER_FT2232:
+		return ft2232_spi_write_256(flash, buf);
 	default:
 		printf_debug
 		    ("%s called, but no SPI chipset/strapping detected\n",
Index: flashrom-ftdi2232_spi/Makefile
===================================================================
--- flashrom-ftdi2232_spi/Makefile	(Revision 597)
+++ flashrom-ftdi2232_spi/Makefile	(Arbeitskopie)
@@ -22,6 +22,7 @@
 CC      ?= gcc
 STRIP   = strip
 INSTALL = install
+DIFF	= diff
 PREFIX  ?= /usr/local
 MANDIR  ?= $(PREFIX)/share/man
 CFLAGS  ?= -Os -Wall -Werror
@@ -48,9 +49,9 @@
 	sst49lfxxxc.o sst_fwhub.o layout.o cbtable.o flashchips.o physmap.o \
 	flashrom.o w39v080fa.o sharplhf00l04.o w29ee011.o spi.o it87spi.o \
 	ichspi.o w39v040c.o sb600spi.o wbsio_spi.o m29f002.o internal.o \
-	dummyflasher.o pcidev.o nic3com.o satasii.o
+	dummyflasher.o pcidev.o nic3com.o satasii.o ft2232_spi.o
 
-all: pciutils dep $(PROGRAM)
+all: pciutils .features dep $(PROGRAM)
 
 # Set the flashrom version string from the highest revision number
 # of the checked out flashrom files.
@@ -63,16 +64,19 @@
 SVNDEF := -D'FLASHROM_VERSION="$(VERSION)"'
 
 $(PROGRAM): $(OBJS)
-	$(CC) $(LDFLAGS) -o $(PROGRAM) $(OBJS) $(LIBS)
+	$(CC) $(LDFLAGS) -o $(PROGRAM) $(OBJS) $(LIBS) $(FEATURE_LIBS)
 
 flashrom.o: flashrom.c
-	$(CC) $(CFLAGS) $(CPPFLAGS)  -c -o $@ $< $(SVNDEF)
+	$(CC) $(CFLAGS) $(CPPFLAGS) $(FEATURE_CFLAGS) -c -o $@ $< $(SVNDEF)
 
+%.o: %.c .features
+	$(CC) $(CFLAGS) $(CPPFLAGS) $(FEATURE_CFLAGS) -c $< -o $@
+
 clean:
 	rm -f $(PROGRAM) *.o
 
 distclean: clean
-	rm -f .dependencies
+	rm -f .dependencies .features
 
 dep:
 	@$(CC) $(CPPFLAGS) $(SVNDEF) -MM *.c > .dependencies
@@ -81,7 +85,7 @@
 	$(STRIP) $(STRIP_ARGS) $(PROGRAM)
 
 compiler:
-	@echo; printf "Checking for a C compiler... "
+	@printf "Checking for a C compiler... "
 	@$(shell ( echo "int main(int argc, char **argv)"; \
 		   echo "{ return 0; }"; ) > .test.c )
 	@$(CC) $(CFLAGS) $(LDFLAGS) .test.c -o .test >/dev/null &&	\
@@ -89,8 +93,10 @@
 		rm -f .test.c .test; exit 1)
 	@rm -f .test.c .test
 
-pciutils: compiler
-	@echo; printf "Checking for pciutils and zlib... "
+# We don't specify compiler as requirement because the compiler is already
+# checked during makefile remake through .features
+pciutils:
+	@printf "Checking for pciutils and zlib... "
 	@$(shell ( echo "#include <pci/pci.h>";		   \
 		   echo "struct pci_access *pacc;";	   \
 		   echo "int main(int argc, char **argv)"; \
@@ -102,6 +108,19 @@
 		rm -f .test.c .test; exit 1)
 	@rm -f .test.c .test
 
+.features: compiler
+	@printf "Checking for FTDI support... "
+	@$(shell ( echo "#include <ftdi.h>";		   \
+		   echo "struct ftdi_context *ftdic = NULL;";	   \
+		   echo "int main(int argc, char **argv)"; \
+		   echo "{ return ftdi_init(ftdic); }"; ) > .featuretest.c )
+	@$(CC) $(CFLAGS) $(LDFLAGS) .featuretest.c -o .featuretest $(LIBS) -lftdi >/dev/null 2>&1 &&	\
+		( echo "found."; echo FEATURE_CFLAGS := -D'FT2232_SPI_SUPPORT=1' > .features.tmp;	\
+		  echo FEATURE_LIBS := -lftdi >> .features.tmp) ||	\
+		( echo "not found."; echo "" > .features.tmp )
+	@$(DIFF) -q .features.tmp .features >/dev/null 2>&1 && rm .features.tmp || mv .features.tmp .features
+	@rm -f .featuretest.c .featuretest
+
 install: $(PROGRAM)
 	mkdir -p $(DESTDIR)$(PREFIX)/sbin
 	mkdir -p $(DESTDIR)$(MANDIR)/man8
@@ -122,3 +141,4 @@
 .PHONY: all clean distclean dep compiler pciutils export tarball
 
 -include .dependencies
+-include .features
Index: flashrom-ftdi2232_spi/ft2232_spi.c
===================================================================
--- flashrom-ftdi2232_spi/ft2232_spi.c	(Revision 0)
+++ flashrom-ftdi2232_spi/ft2232_spi.c	(Revision 0)
@@ -0,0 +1,288 @@
+/*
+ * This file is part of the flashrom project.
+ *
+ * Copyright (C) 2009 Paul Fox <pgf@laptop.org>
+ * Copyright (C) 2009 Carl-Daniel Hailfinger
+ *
+ * based initially on example program bitbang_ft2232.c from
+ * the libftdi-0.16 distribution, from:
+ *  Intra2net AG <opensource@intra2net.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301 USA
+ */
+
+#include <stdio.h>
+#include <stdint.h>
+#include <string.h>
+#include <stdlib.h>
+#include "flash.h"
+#include "spi.h"
+
+#if FT2232_SPI_SUPPORT == 1
+
+#include <ftdi.h>
+
+/* the 'H' chips can run internally at either 12Mhz or 60Mhz.
+ * the non-H chips can only run at 12Mhz. */
+#define CLOCK_5X 1
+
+/* in either case, the divisor is a simple integer clock divider. 
+ * if CLOCK_5X is set, this divisor divides 30Mhz, else it
+ * divides 6Mhz */
+#define DIVIDE_BY 3  // e.g. '3' will give either 10Mhz or 2Mhz spi clock
+
+
+static struct ftdi_context ftdic_context;
+
+int send_buf(struct ftdi_context *ftdic, const unsigned char *buf, int size)
+{
+	int r;
+	r = ftdi_write_data(ftdic, (unsigned char *) buf, size);
+	if (r < 0) {
+		fprintf(stderr, "ftdi_write_data: %d, %s\n", r,
+				ftdi_get_error_string(ftdic));
+		return 1;
+	}
+	return 0;
+}
+
+int get_buf(struct ftdi_context *ftdic, const unsigned char *buf, int size)
+{
+	int r;
+	r = ftdi_read_data(ftdic, (unsigned char *) buf, size);
+	if (r < 0) {
+		fprintf(stderr, "ftdi_read_data: %d, %s\n", r,
+				ftdi_get_error_string(ftdic));
+		return 1;
+	}
+	return 0;
+}
+
+int ft2232_spi_init(void)
+{
+	int f;
+	struct ftdi_context *ftdic = &ftdic_context;
+	unsigned char buf[512];
+	unsigned char port_val = 0;
+
+
+	if (ftdi_init(ftdic) < 0) {
+		fprintf(stderr, "ftdi_init failed\n");
+		return EXIT_FAILURE;
+	}
+
+	// f = ftdi_usb_open(ftdic, 0x0403, 0x6010); // FT2232
+	f = ftdi_usb_open(ftdic, 0x0403, 0x6011); // FT4232
+
+	if (f < 0 && f != -5) {
+		fprintf(stderr, "unable to open ftdi device: %d (%s)\n", f,
+				ftdi_get_error_string(ftdic));
+		exit(-1);
+	}
+
+	if (ftdi_set_interface(ftdic, INTERFACE_B) < 0) {
+		fprintf(stderr, "unable to select FT2232 channel B: %s\n",
+				ftdic->error_str);
+	}
+
+	if (ftdi_usb_reset(ftdic) < 0) {
+		fprintf(stderr, "unable to reset ftdi device\n");
+	}
+
+	if (ftdi_set_latency_timer(ftdic, 2) < 0) {
+		fprintf(stderr, "unable to set latency timer\n");
+	}
+
+	if (ftdi_write_data_set_chunksize(ftdic, 512)) {
+		fprintf(stderr, "unable to set chunk size\n");
+	}
+
+	if (ftdi_set_bitmode(ftdic, 0x00, 2) < 0) {
+		fprintf(stderr, "unable to set bitmode\n");
+	}
+
+#if CLOCK_5X
+	printf_debug("disable divide-by-5 front stage\n");
+	buf[0] = 0x8a;		/* disable divide-by-5 */
+	if (send_buf(ftdic, buf, 1))
+		return -1;
+#define MPSSE_CLK 60.0
+
+#else
+
+#define MPSSE_CLK 12.0
+
+#endif
+	printf_debug("set clock divisor\n");
+	buf[0] = 0x86;		/* command "set divisor" */
+	/* valueL/valueH are (desired_divisor - 1) */
+	buf[1] = (DIVIDE_BY-1) & 0xff;
+	buf[2] = ((DIVIDE_BY-1) >> 8) & 0xff;
+	if (send_buf(ftdic, buf, 3))
+		return -1;
+
+	printf("spi clock is %fMhz\n",
+		(double)(MPSSE_CLK / (((DIVIDE_BY-1) + 1) * 2)));
+
+	/* Disconnect TDI/DO to TDO/DI for Loopback */
+	printf_debug("no loopback of tdi/do tdo/di\n");
+	buf[0] = 0x85;
+	if (send_buf(ftdic, buf, 1))
+		return -1;
+
+	printf_debug("set data bits\n");
+	/* Set data bits low-byte command:
+	 *  value: 0x08  CS=high, DI=low, DO=low, SK=low
+	 *    dir: 0x0b  CS=output, DI=input, DO=output, SK=output
+	 */
+#define CS_BIT 0x08
+
+	buf[0] = SET_BITS_LOW;
+	buf[1] = (port_val = CS_BIT);
+	buf[2] = 0x0b;
+	if (send_buf(ftdic, buf, 3))
+		return -1;
+
+	printf_debug("\nft2232 chosen\n");
+
+	buses_supported = CHIP_BUSTYPE_SPI;
+	spi_controller = SPI_CONTROLLER_FT2232;
+
+	return 0;
+}
+
+int ft2232_spi_command(unsigned int writecnt, unsigned int readcnt,
+		const unsigned char *writearr, unsigned char *readarr)
+{
+	struct ftdi_context *ftdic = &ftdic_context;
+	static unsigned char *buf = NULL;
+	unsigned char port_val = 0;
+	int i, ret = 0;
+
+	buf = realloc(buf, writecnt + readcnt + 100);
+	if (!buf) {
+		fprintf(stderr, "Out of memory!\n");
+		exit(1);
+	}
+
+	i = 0;
+
+	/* minimize USB transfers by packing as many commands
+	 * as possible together.  if we're not expecting to
+	 * read, we can assert CS, write, and deassert CS all
+	 * in one shot.  if reading, we do three separate
+	 * operations. */
+	printf_debug("Assert CS#\n");
+	buf[i++] = SET_BITS_LOW;
+	buf[i++] = (port_val &= ~CS_BIT);
+	buf[i++] = 0x0b;
+
+	if (writecnt) {
+		buf[i++] = 0x11;
+		buf[i++] = (writecnt - 1) & 0xff;
+		buf[i++] = ((writecnt - 1) >> 8) & 0xff;
+		memcpy(buf+i, writearr, writecnt);
+		i += writecnt;
+	}
+
+	/* optionally terminate this batch of commands with a
+	 * read command, then do the fetch of the results.
+	 */
+	if (readcnt) {
+		buf[i++] = 0x20;
+		buf[i++] = (readcnt - 1) & 0xff;
+		buf[i++] = ((readcnt - 1) >> 8) & 0xff;
+		ret = send_buf(ftdic, buf, i);
+		i = 0;
+		if (ret) goto deassert_cs;
+
+		/* FIXME: This is unreliable. There's no guarantee that we read
+		 * the response directly after sending the read command.
+		 * We may be scheduled out etc.
+		 */
+		ret = get_buf(ftdic, readarr, readcnt);
+
+	}
+
+    deassert_cs:
+	printf_debug("de-assert CS#\n");
+	buf[i++] = SET_BITS_LOW;
+	buf[i++] = (port_val |= CS_BIT);
+	buf[i++] = 0x0b;
+	if (send_buf(ftdic, buf, i))
+		return -1;
+
+	return ret;
+}
+
+int ft2232_spi_read(struct flashchip *flash, uint8_t *buf, int start, int len)
+{
+	/* Maximum read length is 64k bytes. */
+	return spi_read_chunked(flash, buf, start, len, 64 * 1024);
+}
+
+int ft2232_spi_write_256(struct flashchip *flash, uint8_t *buf)
+{
+	int total_size = 1024 * flash->total_size;
+	int i;
+
+	printf_debug("total_size is %d\n", total_size);
+	for (i = 0; i < total_size; i += 256) {
+		int l, r;
+		if (i + 256 <= total_size)
+			l = 256;
+		else
+			l = total_size - i;
+
+		spi_write_enable();
+		if ((r = spi_nbyte_program(i, &buf[i], l))) {
+			fprintf(stderr, "%s: write fail %d\n", __FUNCTION__, r);
+			// spi_write_disable();  chip does this for us
+			return 1;
+		}
+		
+		while (spi_read_status_register() & JEDEC_RDSR_BIT_WIP)
+			/* loop */;
+	}
+	// spi_write_disable();  chip does this for us
+
+	return 0;
+}
+
+#else
+int ft2232_spi_init(void)
+{
+	fprintf(stderr, "FT2232 SPI support was not compiled in\n");
+	exit(1);
+}
+
+int ft2232_spi_command(unsigned int writecnt, unsigned int readcnt,
+		const unsigned char *writearr, unsigned char *readarr)
+{
+	fprintf(stderr, "FT2232 SPI support was not compiled in\n");
+	exit(1);
+}
+
+int ft2232_spi_read(struct flashchip *flash, uint8_t *buf, int start, int len)
+{
+	fprintf(stderr, "FT2232 SPI support was not compiled in\n");
+	exit(1);
+}
+
+int ft2232_spi_write_256(struct flashchip *flash, uint8_t *buf)
+{
+	fprintf(stderr, "FT2232 SPI support was not compiled in\n");
+	exit(1);
+}
+#endif
Index: flashrom-ftdi2232_spi/flashrom.c
===================================================================
--- flashrom-ftdi2232_spi/flashrom.c	(Revision 597)
+++ flashrom-ftdi2232_spi/flashrom.c	(Arbeitskopie)
@@ -116,6 +116,22 @@
 		.delay			= internal_delay,
 	},
 
+	{
+		.init			= ft2232_spi_init,
+		.shutdown		= dummy_shutdown,
+		.map_flash_region	= dummy_map,
+		.unmap_flash_region	= dummy_unmap,
+		.chip_readb		= dummy_chip_readb,
+		.chip_readw		= fallback_chip_readw,
+		.chip_readl		= fallback_chip_readl,
+		.chip_readn		= fallback_chip_readn,
+		.chip_writeb		= dummy_chip_writeb,
+		.chip_writew		= fallback_chip_writew,
+		.chip_writel		= fallback_chip_writel,
+		.chip_writen		= fallback_chip_writen,
+		.delay			= internal_delay,
+	},
+
 	{},
 };
 
@@ -589,7 +605,7 @@
 	     "   -i | --image <name>:              only flash image name from flash layout\n"
 	     "   -L | --list-supported:            print supported devices\n"
 	     "   -p | --programmer <name>:         specify the programmer device\n"
-	     "                                     (internal, dummy, nic3com, satasii, it87spi)\n"
+	     "                                     (internal, dummy, nic3com, satasii, it87spi, ft2232spi)\n"
 	     "   -h | --help:                      print this help text\n"
 	     "   -R | --version:                   print the version (release)\n"
 	     "\nYou can specify one of -E, -r, -w, -v or no operation.\n"
@@ -747,6 +763,8 @@
 					pcidev_bdf = strdup(optarg + 8);
 			} else if (strncmp(optarg, "it87spi", 7) == 0) {
 				programmer = PROGRAMMER_IT87SPI;
+			} else if (strncmp(optarg, "ft2232spi", 9) == 0) {
+				programmer = PROGRAMMER_FT2232SPI;
 			} else {
 				printf("Error: Unknown programmer.\n");
 				exit(1);
