Linux version 2.6.18-92.el5 (mockbuild@builder16.centos.org) (gcc version 4.1.2 20071124 (Red Hat 4.1.2-42)) #1 SMP Tue Jun 10 18:49:47 EDT 2008 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000001fff0000 (usable) BIOS-e820: 000000001fff0000 - 0000000020000000 (reserved) 0MB HIGHMEM available. 511MB LOWMEM available. found SMP MP-table at 000fd4f0 Memory for crash kernel (0x0 to 0x0) notwithin permissible range disabling kdump Using x86 segment limits to approximate NX protection On node 0 totalpages: 131056 DMA zone: 4096 pages, LIFO batch:0 Normal zone: 126960 pages, LIFO batch:31 DMI 2.4 present. Using APIC driver default ACPI: Unable to locate RSDP Intel MultiProcessor Specification v1.4 Virtual Wire compatibility mode. OEM ID: Intel Product ID: Truxton APIC at: 0xFEE00000 Processor #0 6:5 APIC version 20 I/O APIC #8 Version 32 at 0xFEC00000. Enabling APIC mode: Flat. Using 1 I/O APICs Processors: 1 Allocating PCI resources starting at 30000000 (gap: 20000000:e0000000) Detected 800.050 MHz processor. Built 1 zonelists. Total pages: 131056 Kernel command line: ro root=/dev/VolGroup00/LogVol00 rhgb quiet mapped APIC to ffffd000 (fee00000) mapped IOAPIC to ffffc000 (fec00000) Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Initializing CPU#0 CPU 0 irqstacks, hard=c074b000 soft=c072b000 PID hash table entries: 2048 (order: 11, 8192 bytes) Uhhuh. NMI received for unknown reason b1 on CPU 0. You probably have a hardware problem with your RAM chips Dazed and confused, but trying to continue spurious 8259A interrupt: IRQ7. Console: colour VGA+ 80x25 Dentry cache hash table entries: 65536 (order: 6, 262144 bytes) Inode-cache hash table entries: 32768 (order: 5, 131072 bytes) Memory: 512112k/524224k available (2095k kernel code, 11620k reserved, 874k data, 228k init, 0k highmem) Checking if this processor honours the WP bit even in supervisor mode... Ok. Calibrating delay using timer specific routine.. 1601.63 BogoMIPS (lpj=800815) Security Framework v1.0.0 initialized SELinux: Initializing. SELinux: Starting in permissive mode selinux_register_security: Registering secondary module capability Capability LSM initialized as secondary Mount-cache hash table entries: 512 CPU: After generic identify, caps: afe9fbff 00100000 00000000 00000000 00000000 00000000 00000000 CPU: After vendor identify, caps: afe9fbff 00100000 00000000 00000000 00000000 00000000 00000000 CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 256K CPU: After all inits, caps: afe9f3ff 00100000 00000000 00000140 00000000 00000000 00000000 Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. Checking 'hlt' instruction... OK. SMP alternatives: switching to UP code Freeing SMP alternatives: 14k freed CPU0: Intel Genuine Intel(R) processor 1.20GHz stepping 00 Total of 1 processors activated (1601.63 BogoMIPS). ENABLING IO-APIC IRQs ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=0 pin2=0 Brought up 1 CPUs sizeof(vma)=84 bytes sizeof(page)=32 bytes sizeof(inode)=340 bytes sizeof(dentry)=136 bytes sizeof(ext3inode)=492 bytes sizeof(buffer_head)=52 bytes sizeof(skbuff)=172 bytes checking if image is initramfs... it is Freeing initrd memory: 3038k freed NET: Registered protocol family 16 ACPI Exception (utmutex-0262): AE_BAD_PARAMETER, Thread DFCD5AA0 could not acquire Mutex [2] [20060707] No dock devices found. ACPI Exception (utmutex-0262): AE_BAD_PARAMETER, Thread DFCD5AA0 could not acquire Mutex [2] [20060707] PCI: Using configuration type 1 Setting up standard PCI resources ACPI: Interpreter disabled. Linux Plug and Play Support v0.97 (c) Adam Belay pnp: PnP ACPI: disabled usbcore: registered new driver usbfs usbcore: registered new driver hub PCI: Probing PCI hardware PCI: Probing PCI hardware (bus 00) Boot video device is 0000:08:00.0 PCI: Using IRQ router PIIX/ICH [8086/5031] at 0000:00:1f.0 PCI->APIC IRQ transform: 0000:00:01.0[A] -> IRQ 137 PCI->APIC IRQ transform: 0000:00:02.0[A] -> IRQ 137 PCI->APIC IRQ transform: 0000:00:03.0[A] -> IRQ 137 PCI->APIC IRQ transform: 0000:00:04.0[A] -> IRQ 137 PCI->APIC IRQ transform: 0000:00:1d.0[A] -> IRQ 137 PCI->APIC IRQ transform: 0000:00:1d.7[A] -> IRQ 137 PCI->APIC IRQ transform: 0000:00:1f.2[B] -> IRQ 145 PCI->APIC IRQ transform: 0000:00:1f.3[B] -> IRQ 145 PCI->APIC IRQ transform: 0000:00:1f.4[D] -> IRQ 145 PCI->APIC IRQ transform: 0000:02:00.0[A] -> IRQ 137 PCI: using PPB 0000:02:00.0[B] to get irq 17 PCI->APIC IRQ transform: 0000:03:01.0[B] -> IRQ 145 PCI: using PPB 0000:02:00.0[C] to get irq 18 PCI->APIC IRQ transform: 0000:03:02.0[C] -> IRQ 153 PCI: using PPB 0000:02:00.0[D] to get irq 19 PCI->APIC IRQ transform: 0000:03:03.0[D] -> IRQ 161 PCI: using PPB 0000:02:00.0[A] to get irq 16 PCI->APIC IRQ transform: 0000:03:04.0[A] -> IRQ 137 PCI->APIC IRQ transform: 0000:09:00.0[A] -> IRQ 137 PCI->APIC IRQ transform: 0000:09:01.0[A] -> IRQ 145 PCI->APIC IRQ transform: 0000:09:02.0[A] -> IRQ 153 PCI: using PPB 0000:00:04.0[A] to get irq 16 PCI->APIC IRQ transform: 0000:09:04.0[A] -> IRQ 137 PCI: using PPB 0000:00:04.0[B] to get irq 16 PCI->APIC IRQ transform: 0000:09:05.0[B] -> IRQ 137 PCI: using PPB 0000:00:04.0[C] to get irq 16 PCI->APIC IRQ transform: 0000:09:06.0[C] -> IRQ 137 PCI: using PPB 0000:00:04.0[D] to get irq 16 PCI->APIC IRQ transform: 0000:09:07.0[D] -> IRQ 137 PCI: using PPB 0000:00:04.0[A] to get irq 16 PCI->APIC IRQ transform: 0000:09:08.0[A] -> IRQ 137 PCI: using PPB 0000:00:04.0[B] to get irq 16 PCI->APIC IRQ transform: 0000:09:09.0[B] -> IRQ 137 PCI: using PPB 0000:00:04.0[C] to get irq 16 PCI->APIC IRQ transform: 0000:09:0a.0[C] -> IRQ 137 PCI: using PPB 0000:00:04.0[D] to get irq 16 PCI->APIC IRQ transform: 0000:09:0b.0[D] -> IRQ 137 PCI: using PPB 0000:00:04.0[A] to get irq 16 PCI->APIC IRQ transform: 0000:09:0c.0[A] -> IRQ 137 NetLabel: Initializing NetLabel: domain hash size = 128 NetLabel: protocols = UNLABELED CIPSOv4 NetLabel: unlabeled traffic allowed by default PCI: Bridge: 0000:00:02.0 IO window: disabled. MEM window: disabled. PREFETCH window: disabled. PCI: Bridge: 0000:03:01.0 IO window: disabled. MEM window: disabled. PREFETCH window: disabled. PCI: Bridge: 0000:05:00.0 IO window: disabled. MEM window: f5100000-f51fffff PREFETCH window: disabled. PCI: Bridge: 0000:03:02.0 IO window: disabled. MEM window: f5100000-f51fffff PREFETCH window: disabled. PCI: Bridge: 0000:03:03.0 IO window: disabled. MEM window: disabled. PREFETCH window: disabled. PCI: Bridge: 0000:03:04.0 IO window: 1000-1fff MEM window: f2000000-f50fffff PREFETCH window: c0000000-dfffffff PCI: Bridge: 0000:02:00.0 IO window: 1000-1fff MEM window: f2000000-f51fffff PREFETCH window: c0000000-dfffffff PCI: Bridge: 0000:00:03.0 IO window: 1000-1fff MEM window: f2000000-f52fffff PREFETCH window: c0000000-dfffffff PCI: Bridge: 0000:00:04.0 IO window: 2000-2fff MEM window: e0000000-f00fffff PREFETCH window: disabled. PCI: Setting latency timer of device 0000:00:02.0 to 64 PCI: Setting latency timer of device 0000:00:03.0 to 64 PCI: Setting latency timer of device 0000:02:00.0 to 64 PCI: Setting latency timer of device 0000:03:01.0 to 64 PCI: Setting latency timer of device 0000:03:02.0 to 64 PCI: Setting latency timer of device 0000:05:00.0 to 64 PCI: Setting latency timer of device 0000:03:03.0 to 64 PCI: Setting latency timer of device 0000:03:04.0 to 64 PCI: Setting latency timer of device 0000:00:04.0 to 64 NET: Registered protocol family 2 IP route cache hash table entries: 4096 (order: 2, 16384 bytes) TCP established hash table entries: 16384 (order: 5, 131072 bytes) TCP bind hash table entries: 8192 (order: 4, 65536 bytes) TCP: Hash tables configured (established 16384 bind 8192) TCP reno registered apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac) audit: initializing netlink socket (disabled) audit(1248909756.093:1): initialized Total HugeTLB memory allocated, 0 VFS: Disk quotas dquot_6.5.1 Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) SELinux: Registering netfilter hooks Initializing Cryptographic API ksign: Installing public key data Loading keyring - Added public key D1F27370ACBC602E - User ID: CentOS (Kernel Module GPG key) io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered io scheduler cfq registered (default) PCI: Setting latency timer of device 0000:00:02.0 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:02.0:pcie00] PCI: Setting latency timer of device 0000:00:03.0 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:03.0:pcie00] PCI: Setting latency timer of device 0000:02:00.0 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:02:00.0:pcie10] PCI: Setting latency timer of device 0000:03:01.0 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:03:01.0:pcie20] Allocate Port Service[0000:03:01.0:pcie22] PCI: Setting latency timer of device 0000:03:02.0 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:03:02.0:pcie20] Allocate Port Service[0000:03:02.0:pcie22] PCI: Setting latency timer of device 0000:03:03.0 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:03:03.0:pcie20] Allocate Port Service[0000:03:03.0:pcie22] PCI: Setting latency timer of device 0000:03:04.0 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:03:04.0:pcie20] Allocate Port Service[0000:03:04.0:pcie22] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 Real Time Clock Driver v1.12ac Non-volatile memory driver v1.2 Linux agpgart interface v0.101 (c) Dave Jones Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A RAMDISK driver initialized: 16 RAM disks of 16384K size 4096 blocksize Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx Probing IDE interface ide0... Probing IDE interface ide1... ide-floppy driver 0.99.newide usbcore: registered new driver hiddev usbcore: registered new driver usbhid drivers/usb/input/hid-core.c: v2.6:USB HID core driver PNP: No PS/2 controller found. Probing ports directly. i8042.c: No controller found. mice: PS/2 mouse device common for all mice md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27 md: bitmap version 4.39 TCP bic registered Initializing IPsec netlink socket NET: Registered protocol family 1 NET: Registered protocol family 17 Using IPI No-Shortcut mode Freeing unused kernel memory: 228k freed Write protecting the kernel read-only data: 393k Time: tsc clocksource has been installed. PCI: Setting latency timer of device 0000:00:1d.7 to 64 ehci_hcd 0000:00:1d.7: EHCI Host Controller ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1 ehci_hcd 0000:00:1d.7: debug port 1 PCI: cache line size of 32 is not supported by device 0000:00:1d.7 ehci_hcd 0000:00:1d.7: irq 137, io mem 0xf5307000 ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 usb usb1: configuration #1 chosen from 1 choice hub 1-0:1.0: USB hub found hub 1-0:1.0: 2 ports detected ohci_hcd: 2005 April 22 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI) USB Universal Host Controller Interface driver v3.0 PCI: Setting latency timer of device 0000:00:1d.0 to 64 uhci_hcd 0000:00:1d.0: UHCI Host Controller uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2 uhci_hcd 0000:00:1d.0: irq 137, io base 0x000030c0 usb usb2: configuration #1 chosen from 1 choice hub 2-0:1.0: USB hub found hub 2-0:1.0: 2 ports detected SCSI subsystem initialized libata version 3.00 loaded. ata_piix 0000:00:1f.2: version 2.12 ata_piix 0000:00:1f.2: MAP [ P0 -- P1 -- ] PCI: Setting latency timer of device 0000:00:1f.2 to 64 scsi0 : ata_piix scsi1 : ata_piix ata1: SATA max UDMA/133 cmd 0x3410 ctl 0x3430 bmdma 0x3400 irq 145 ata2: SATA max UDMA/133 cmd 0x3420 ctl 0x3440 bmdma 0x3408 irq 145 usb 2-1: new full speed USB device using uhci_hcd and address 2 usb 2-1: not running at top speed; connect to a high speed hub usb 2-1: configuration #1 chosen from 1 choice ata1.00: ATAPI: ATAPI DVD C DH52C2S, NP57, max UDMA/100 ata1.00: configured for UDMA/100 ata2.00: ATA-7: WDC WD1600JS-00NCB1, 10.02E02, max UDMA/133 ata2.00: 312581808 sectors, multi 0: LBA48 NCQ (depth 0/32) ata2.00: configured for UDMA/133 Vendor: ATAPI Model: DVD C DH52C2S Rev: NP57 Type: CD-ROM ANSI SCSI revision: 05 Vendor: ATA Model: WDC WD1600JS-00N Rev: 10.0 Type: Direct-Access ANSI SCSI revision: 05 SCSI device sda: 312581808 512-byte hdwr sectors (160042 MB) sda: Write Protect is off sda: Mode Sense: 00 3a 00 00 SCSI device sda: drive cache: write back SCSI device sda: 312581808 512-byte hdwr sectors (160042 MB) sda: Write Protect is off sda: Mode Sense: 00 3a 00 00 SCSI device sda: drive cache: write back sda: sda1 sda2 sd 1:0:0:0: Attached scsi disk sda device-mapper: uevent: version 1.0.3 device-mapper: ioctl: 4.11.5-ioctl (2007-12-12) initialised: dm-devel@redhat.com EXT3-fs: INFO: recovery required on readonly filesystem. EXT3-fs: write access will be enabled during recovery. kjournald starting. Commit interval 5 seconds EXT3-fs: recovery complete. EXT3-fs: mounted filesystem with ordered data mode. security: 3 users, 6 roles, 1676 types, 213 bools, 1 sens, 1024 cats security: 61 classes, 60092 rules SELinux: Completing initialization. SELinux: Setting up existing superblocks. SELinux: initialized (dev dm-0, type ext3), uses xattr SELinux: initialized (dev usbfs, type usbfs), uses genfs_contexts SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs SELinux: initialized (dev hugetlbfs, type hugetlbfs), uses genfs_contexts SELinux: initialized (dev devpts, type devpts), uses transition SIDs SELinux: initialized (dev eventpollfs, type eventpollfs), uses task SIDs SELinux: initialized (dev inotifyfs, type inotifyfs), uses genfs_contexts SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs SELinux: initialized (dev futexfs, type futexfs), uses genfs_contexts SELinux: initialized (dev pipefs, type pipefs), uses task SIDs SELinux: initialized (dev sockfs, type sockfs), uses task SIDs SELinux: initialized (dev cpuset, type cpuset), uses genfs_contexts SELinux: initialized (dev proc, type proc), uses genfs_contexts SELinux: initialized (dev bdev, type bdev), uses genfs_contexts SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts audit(1248909769.271:2): policy loaded auid=4294967295 ses=4294967295 Global Configuration Unit Driver - version 1.0.0 Copyright (c) 1999-2007 Intel Corporation. gcu: 0000:09:03.0: gcu_probe: Intel(R) GCU Initialized Gigabit Ethernet Controller Driver - version 1.0.1-NAPI Copyright (c) 1999-2007 Intel Corporation. PCI: Setting latency timer of device 0000:09:00.0 to 64 iegbe: eth0: iegbe_probe: Intel(R) PRO/1000 Network Connection PCI: Setting latency timer of device 0000:09:01.0 to 64 iegbe: eth1: iegbe_probe: Intel(R) PRO/1000 Network Connection PCI: Setting latency timer of device 0000:09:02.0 to 64 iegbe: eth2: iegbe_probe: Intel(R) PRO/1000 Network Connection Initializing USB Mass Storage driver... scsi2 : SCSI emulation for USB Mass Storage devices usb-storage: device found at 2 usb-storage: waiting for device to settle before scanning usbcore: registered new driver usb-storage USB Mass Storage support registered. scsi 0:0:0:0: Attached scsi generic sg0 type 5 sd 1:0:0:0: Attached scsi generic sg1 type 0 input: PC Speaker as /class/input/input0 sr0: scsi3-mmc drive: 62x/125x writer cd/rw xa/form2 cdda tray Uniform CD-ROM driver Revision: 3.20 sr 0:0:0:0: Attached scsi CD-ROM sr0 Floppy drive(s): fd0 is 1.44M floppy0: no floppy controllers found Floppy drive(s): fd0 is 1.44M Vendor: Imation Model: Flash Drive Rev: 1.00 Type: Direct-Access ANSI SCSI revision: 02 SCSI device sdb: 2040832 512-byte hdwr sectors (1045 MB) sdb: Write Protect is off sdb: Mode Sense: 0b 00 00 08 sdb: assuming drive cache: write through SCSI device sdb: 2040832 512-byte hdwr sectors (1045 MB) sdb: Write Protect is off sdb: Mode Sense: 0b 00 00 08 sdb: assuming drive cache: write through sdb: sdb1 sd 2:0:0:0: Attached scsi removable disk sdb sd 2:0:0:0: Attached scsi generic sg2 type 0 usb-storage: device scan complete floppy0: no floppy controllers found lp: driver loaded but no devices found SELinux: initialized (dev ramfs, type ramfs), uses genfs_contexts NET: Registered protocol family 10 lo: Disabled Privacy Extensions IPv6 over IPv4 tunneling driver md: Autodetecting RAID arrays. md: autorun ... md: ... autorun DONE. device-mapper: multipath: version 1.0.5 loaded EXT3 FS on dm-0, internal journal kjournald starting. Commit interval 5 seconds EXT3 FS on sda1, internal journal EXT3-fs: mounted filesystem with ordered data mode. SELinux: initialized (dev sda1, type ext3), uses xattr SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs Adding 1966072k swap on /dev/VolGroup00/LogVol01. Priority:-1 extents:1 across:1966072k SELinux: initialized (dev binfmt_misc, type binfmt_misc), uses genfs_contexts IA-32 Microcode Update Driver: v1.14a ip6_tables: (C) 2000-2006 Netfilter Core Team ip_tables: (C) 2000-2006 Netfilter Core Team Netfilter messages via NETLINK v0.30. ip_conntrack version 2.4 (4095 buckets, 32760 max) - 228 bytes per conntrack ADDRCONF(NETDEV_UP): eth0: link is not ready ADDRCONF(NETDEV_UP): eth1: link is not ready iegbe: eth1: iegbe_watchdog: NIC Link is Up 100 Mbps Full Duplex ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready ADDRCONF(NETDEV_UP): eth2: link is not ready SELinux: initialized (dev rpc_pipefs, type rpc_pipefs), uses genfs_contexts Bluetooth: Core ver 2.10 NET: Registered protocol family 31 Bluetooth: HCI device and connection manager initialized Bluetooth: HCI socket layer initialized Bluetooth: L2CAP ver 2.8 Bluetooth: L2CAP socket layer initialized Bluetooth: RFCOMM socket layer initialized Bluetooth: RFCOMM TTY layer initialized Bluetooth: RFCOMM ver 1.8 eth1: no IPv6 routers present Bluetooth: HIDP (Human Interface Emulation) ver 1.1 SELinux: initialized (dev autofs, type autofs), uses genfs_contexts SELinux: initialized (dev autofs, type autofs), uses genfs_contexts SELinux: initialized (dev autofs, type autofs), uses genfs_contexts