<br><font size=2 face="sans-serif">Hi all,</font>
<br>
<br><font size=2 face="sans-serif">This is my first email to this mailing
list. I've joined because I've a little question related to the</font>
<br><font size=2 face="sans-serif">BIOS superio initialization process
and I would like to ask to the masters.</font>
<br>
<br><font size=2 face="sans-serif">I'm developing a little hardware module
with a w83627hf superio module. My testing platform</font>
<br><font size=2 face="sans-serif">is using the linux kernel is 2.6.26,
and the kernel driver I'm trying to use is driver/hwmon/w83627hf.c.</font>
<br><font size=2 face="sans-serif">This hardware is attached to a com express
module. I've found that my hardware is not always initialized</font>
<br><font size=2 face="sans-serif">by the com express BIOS, it depends
on the manufacter.</font>
<br>
<br><font size=2 face="sans-serif">The com express from Congatec (conga-BA945)
do it ok. The BIOS sets the hardware monitor device</font>
<br><font size=2 face="sans-serif">address correctly and I can load the
kernel driver and read the voltages and temps.</font>
<br>
<br><font size=2 face="sans-serif">But another one from MSC (MSC CXB-CD945)
it doesn't, then the linux kernel driver refuses to load</font>
<br><font size=2 face="sans-serif">because the hardware monitor address
is not set. I can force this addres (the same that I get from the</font>
<br><font size=2 face="sans-serif">congatec module) to force the kernel
driver loading but the voltages and temps are not read.</font>
<br>
<br><font size=2 face="sans-serif">Then, I think that the hardware is working
but I need some initialization in the southbridge or something</font>
<br><font size=2 face="sans-serif">else that the first BIOS is doing. Where
can I looking for this info? Both com express modules has the</font>
<br><font size=2 face="sans-serif">intel ICH7-M southbridge.<br>
</font>
<br><font size=2 face="Arial"><b>Any help is welcome!</b></font>
<br><font size=2 face="Arial"><b>Regards,</b></font>
<br><font size=2 face="Arial"><b>Jorge</b></font>
<p>