<br><font size=2><tt>> Hi Jorge,<br>
> <br>
</tt></font>
<br><font size=2><tt>Hi Carl-Daniel, thanks for your kick answer!</tt></font>
<br>
<br><font size=2><tt>> > I'm developing a little hardware module
with a w83627hf superio module.<br>
> > This hardware is attached to a com express module. I've found
that my <br>
> > hardware is not always initialized<br>
> > by the com express BIOS, it depends on the manufacter.<br>
> > [...]<br>
> > Then, I think that the hardware is working but I need some initialization
<br>
> > in the southbridge or something<br>
> > else that the first BIOS is doing. Where can I looking for this
info? Both <br>
> > com express modules has the intel ICH7-M southbridge.<br>
> >   <br>
> <br>
> I'd say the best way forward is to diagnose this with the help of<br>
> superiotool. Make sure the w83627hf kernel module is not loaded<br>
> automatically, then run superiotool -dV and compare the outputs. If<br>
> superiotool finds your SuperIO only on one of the boards, you most<br>
> likely have a southbridge resource configuration problem which needs
to<br>
> be addresses by the BIOS manufacturer (or a custom early kernel driver).<br>
</tt></font>
<br><font size=2><tt>I'm very interested in the steps the BIOS takes in
order to do the southbridge</tt></font>
<br><font size=2><tt>resource configuration. Can you point me to the coreboot
files where these</tt></font>
<br><font size=2><tt>steps are done, specifically I'm interested in the
ICH7-M chipset, the one </tt></font>
<br><font size=2><tt>present in all my com express modules, and the steps
to initialize the</tt></font>
<br><font size=2><tt>superio hardware monitor.</tt></font>
<br>
<br><font size=2><tt>Regards</tt></font>
<br><font size=2><tt>Jorge</tt></font>
<br>