Index: src/southbridge/amd/sb600/sb600_early_setup.c
===================================================================
--- src/southbridge/amd/sb600/sb600_early_setup.c	(revision 4762)
+++ src/southbridge/amd/sb600/sb600_early_setup.c	(working copy)
@@ -106,8 +106,8 @@
 	pci_write_config16(dev, 0x68, 0x000e);
 	/* enable LPC ROM range mirroring end   0x000f(ffff) */
 	pci_write_config16(dev, 0x6a, 0x000f);
-	/* enable LPC ROM range start, 0xfff8(0000): 512KB, 0xfff0(0000): 1MB */
-	pci_write_config16(dev, 0x6c, 0xfff0);
+	/* enable LPC ROM range start, 0xfff8(0000): 512KB, 0xfff0(0000): 1MB, 0xffe0(0000): 2MB, 0xffc0(0000): 4MB */
+	pci_write_config16(dev, 0x6c, 0xffc0);
 	/* enable LPC ROM range end at 0xffff(ffff) */
 	pci_write_config16(dev, 0x6e, 0xffff);
 }
Index: src/mainboard/technexion/tim8690/Options.lb
===================================================================
--- src/mainboard/technexion/tim8690/Options.lb	(revision 4762)
+++ src/mainboard/technexion/tim8690/Options.lb	(working copy)
@@ -90,6 +90,7 @@
 uses CONFIG_VIDEO_MB
 uses CONFIG_GFXUMA
 uses CONFIG_HAVE_MAINBOARD_RESOURCES
+uses CONFIG_VGA_ROM_RUN
 
 ###
 ### Build options
@@ -159,6 +160,7 @@
 #VGA Console
 default CONFIG_CONSOLE_VGA=1
 default CONFIG_PCI_ROM_RUN=1
+default CONFIG_VGA_ROM_RUN=1
 
 # BTDC: Only one HT device on Herring.
 #HT Unit ID offset
Index: src/mainboard/technexion/tim5690/fadt.c
===================================================================
--- src/mainboard/technexion/tim5690/fadt.c	(revision 0)
+++ src/mainboard/technexion/tim5690/fadt.c	(revision 0)
@@ -0,0 +1,201 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2008 Advanced Micro Devices, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301 USA
+ */
+
+/*
+ * ACPI - create the Fixed ACPI Description Tables (FADT)
+ */
+
+#include <string.h>
+#include <console/console.h>
+#include <arch/acpi.h>
+#include <arch/io.h>
+#include <device/device.h>
+#include <../southbridge/amd/sb600/sb600.h>
+
+/*extern*/ u16 pm_base = 0x800;
+/* pm_base should be set in sb acpi */
+/* pm_base should be got from bar2 of rs690. Here I compact ACPI
+ * registers into 32 bytes limit.
+ * */
+
+#define ACPI_PM_EVT_BLK		(pm_base + 0x00) /* 4 bytes */
+#define ACPI_PM1_CNT_BLK	(pm_base + 0x04) /* 2 bytes */
+#define ACPI_PMA_CNT_BLK	(pm_base + 0x0F) /* 1 byte */
+#define ACPI_PM_TMR_BLK		(pm_base + 0x18) /* 4 bytes */
+#define ACPI_GPE0_BLK		(pm_base + 0x10) /* 8 bytes */
+#define ACPI_CPU_CONTORL	(pm_base + 0x08) /* 6 bytes */
+
+void acpi_create_fadt(acpi_fadt_t * fadt, acpi_facs_t * facs, void *dsdt)
+{
+	acpi_header_t *header = &(fadt->header);
+
+	pm_base &= 0xFFFF;
+	printk_debug("pm_base: 0x%04x\n", pm_base);
+
+	/* Prepare the header */
+	memset((void *)fadt, 0, sizeof(acpi_fadt_t));
+	memcpy(header->signature, "FACP", 4);
+	header->length = 244;
+	header->revision = 1;
+	memcpy(header->oem_id, OEM_ID, 6);
+	memcpy(header->oem_table_id, "COREBOOT", 8);
+	memcpy(header->asl_compiler_id, ASLC, 4);
+	header->asl_compiler_revision = 0;
+
+	fadt->firmware_ctrl = (u32) facs;
+	fadt->dsdt = (u32) dsdt;
+	/* 3=Workstation,4=Enterprise Server, 7=Performance Server */
+	fadt->preferred_pm_profile = 0x03;
+	fadt->sci_int = 9;
+	/* disable system management mode by setting to 0: */
+	fadt->smi_cmd = 0;
+	fadt->acpi_enable = 0xf0;
+	fadt->acpi_disable = 0xf1;
+	fadt->s4bios_req = 0x0;
+	fadt->pstate_cnt = 0xe2;
+
+	pm_iowrite(0x20, ACPI_PM_EVT_BLK & 0xFF);
+	pm_iowrite(0x21, ACPI_PM_EVT_BLK >> 8);
+	pm_iowrite(0x22, ACPI_PM1_CNT_BLK & 0xFF);
+	pm_iowrite(0x23, ACPI_PM1_CNT_BLK >> 8);
+	pm_iowrite(0x24, ACPI_PM_TMR_BLK & 0xFF);
+	pm_iowrite(0x25, ACPI_PM_TMR_BLK >> 8);
+	pm_iowrite(0x28, ACPI_GPE0_BLK & 0xFF);
+	pm_iowrite(0x29, ACPI_GPE0_BLK >> 8);
+
+	/* CpuControl is in \_PR.CPU0, 6 bytes */
+	pm_iowrite(0x26, ACPI_CPU_CONTORL & 0xFF);
+	pm_iowrite(0x27, ACPI_CPU_CONTORL >> 8);
+
+	pm_iowrite(0x2A, 0);	/* AcpiSmiCmdLo */
+	pm_iowrite(0x2B, 0);	/* AcpiSmiCmdHi */
+
+	pm_iowrite(0x2C, ACPI_PMA_CNT_BLK & 0xFF);
+	pm_iowrite(0x2D, ACPI_PMA_CNT_BLK >> 8);
+
+	pm_iowrite(0x0E, 1<<3 | 0<<2); /* AcpiDecodeEnable, When set, SB uses
+					* the contents of the PM registers at
+					* index 20-2B to decode ACPI I/O address.
+					* AcpiSmiEn & SmiCmdEn*/
+	pm_iowrite(0x10, 1<<1 | 1<<3| 1<<5); /* RTC_En_En, TMR_En_En, GBL_EN_EN */
+	outl(0x1, ACPI_PM1_CNT_BLK);		  /* set SCI_EN */
+
+	fadt->pm1a_evt_blk = ACPI_PM_EVT_BLK;
+	fadt->pm1b_evt_blk = 0x0000;
+	fadt->pm1a_cnt_blk = ACPI_PM1_CNT_BLK;
+	fadt->pm1b_cnt_blk = 0x0000;
+	fadt->pm2_cnt_blk = ACPI_PMA_CNT_BLK;
+	fadt->pm_tmr_blk = ACPI_PM_TMR_BLK;
+	fadt->gpe0_blk = ACPI_GPE0_BLK;
+	fadt->gpe1_blk = 0x0000;	/* we dont have gpe1 block, do we? */
+
+	fadt->pm1_evt_len = 4;
+	fadt->pm1_cnt_len = 2;
+	fadt->pm2_cnt_len = 1;
+	fadt->pm_tmr_len = 4;
+	fadt->gpe0_blk_len = 8;
+	fadt->gpe1_blk_len = 0;
+	fadt->gpe1_base = 0;
+
+	fadt->cst_cnt = 0xe3;
+	fadt->p_lvl2_lat = 101;
+	fadt->p_lvl3_lat = 1001;
+	fadt->flush_size = 0;
+	fadt->flush_stride = 0;
+	fadt->duty_offset = 1;
+	fadt->duty_width = 3;
+	fadt->day_alrm = 0;	/* 0x7d these have to be */
+	fadt->mon_alrm = 0;	/* 0x7e added to cmos.layout */
+	fadt->century = 0;	/* 0x7f to make rtc alrm work */
+	fadt->iapc_boot_arch = 0x3;	/* See table 5-11 */
+	fadt->flags = 0x0001c1a5;/* 0x25; */
+
+	fadt->res2 = 0;
+
+	fadt->reset_reg.space_id = 1;
+	fadt->reset_reg.bit_width = 8;
+	fadt->reset_reg.bit_offset = 0;
+	fadt->reset_reg.resv = 0;
+	fadt->reset_reg.addrl = 0xcf9;
+	fadt->reset_reg.addrh = 0x0;
+
+	fadt->reset_value = 6;
+	fadt->x_firmware_ctl_l = (u32) facs;
+	fadt->x_firmware_ctl_h = 0;
+	fadt->x_dsdt_l = (u32) dsdt;
+	fadt->x_dsdt_h = 0;
+
+	fadt->x_pm1a_evt_blk.space_id = 1;
+	fadt->x_pm1a_evt_blk.bit_width = 32;
+	fadt->x_pm1a_evt_blk.bit_offset = 0;
+	fadt->x_pm1a_evt_blk.resv = 0;
+	fadt->x_pm1a_evt_blk.addrl = ACPI_PM_EVT_BLK;
+	fadt->x_pm1a_evt_blk.addrh = 0x0;
+
+	fadt->x_pm1b_evt_blk.space_id = 1;
+	fadt->x_pm1b_evt_blk.bit_width = 4;
+	fadt->x_pm1b_evt_blk.bit_offset = 0;
+	fadt->x_pm1b_evt_blk.resv = 0;
+	fadt->x_pm1b_evt_blk.addrl = 0x0;
+	fadt->x_pm1b_evt_blk.addrh = 0x0;
+
+	fadt->x_pm1a_cnt_blk.space_id = 1;
+	fadt->x_pm1a_cnt_blk.bit_width = 16;
+	fadt->x_pm1a_cnt_blk.bit_offset = 0;
+	fadt->x_pm1a_cnt_blk.resv = 0;
+	fadt->x_pm1a_cnt_blk.addrl = ACPI_PM1_CNT_BLK;
+	fadt->x_pm1a_cnt_blk.addrh = 0x0;
+
+	fadt->x_pm1b_cnt_blk.space_id = 1;
+	fadt->x_pm1b_cnt_blk.bit_width = 2;
+	fadt->x_pm1b_cnt_blk.bit_offset = 0;
+	fadt->x_pm1b_cnt_blk.resv = 0;
+	fadt->x_pm1b_cnt_blk.addrl = 0x0;
+	fadt->x_pm1b_cnt_blk.addrh = 0x0;
+
+	fadt->x_pm2_cnt_blk.space_id = 1;
+	fadt->x_pm2_cnt_blk.bit_width = 0;
+	fadt->x_pm2_cnt_blk.bit_offset = 0;
+	fadt->x_pm2_cnt_blk.resv = 0;
+	fadt->x_pm2_cnt_blk.addrl = ACPI_PMA_CNT_BLK;
+	fadt->x_pm2_cnt_blk.addrh = 0x0;
+
+	fadt->x_pm_tmr_blk.space_id = 1;
+	fadt->x_pm_tmr_blk.bit_width = 32;
+	fadt->x_pm_tmr_blk.bit_offset = 0;
+	fadt->x_pm_tmr_blk.resv = 0;
+	fadt->x_pm_tmr_blk.addrl = ACPI_PM_TMR_BLK;
+	fadt->x_pm_tmr_blk.addrh = 0x0;
+
+	fadt->x_gpe0_blk.space_id = 1;
+	fadt->x_gpe0_blk.bit_width = 32;
+	fadt->x_gpe0_blk.bit_offset = 0;
+	fadt->x_gpe0_blk.resv = 0;
+	fadt->x_gpe0_blk.addrl = ACPI_GPE0_BLK;
+	fadt->x_gpe0_blk.addrh = 0x0;
+
+	fadt->x_gpe1_blk.space_id = 1;
+	fadt->x_gpe1_blk.bit_width = 0;
+	fadt->x_gpe1_blk.bit_offset = 0;
+	fadt->x_gpe1_blk.resv = 0;
+	fadt->x_gpe1_blk.addrl = 0;
+	fadt->x_gpe1_blk.addrh = 0x0;
+
+	header->checksum = acpi_checksum((void *)fadt, sizeof(acpi_fadt_t));
+}
Index: src/mainboard/technexion/tim5690/Config.lb
===================================================================
--- src/mainboard/technexion/tim5690/Config.lb	(revision 0)
+++ src/mainboard/technexion/tim5690/Config.lb	(revision 0)
@@ -0,0 +1,271 @@
+##
+## This file is part of the coreboot project.
+##
+## Copyright (C) 2008 Advanced Micro Devices, Inc.
+##
+## This program is free software; you can redistribute it and/or modify
+## it under the terms of the GNU General Public License as published by
+## the Free Software Foundation; version 2 of the License.
+##
+## This program is distributed in the hope that it will be useful,
+## but WITHOUT ANY WARRANTY; without even the implied warranty of
+## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+## GNU General Public License for more details.
+##
+## You should have received a copy of the GNU General Public License
+## along with this program; if not, write to the Free Software
+## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301 USA
+##
+##
+##
+
+## CONFIG_XIP_ROM_SIZE must be a power of 2.
+default CONFIG_XIP_ROM_SIZE = 64 * 1024
+include /config/nofailovercalculation.lb
+
+arch i386 end
+
+##
+## Build the objects we have code for in this directory.
+##
+
+driver mainboard.o
+
+#dir /drivers/si/3114
+
+if CONFIG_HAVE_MP_TABLE object mptable.o end
+if CONFIG_HAVE_PIRQ_TABLE
+	object get_bus_conf.o
+	object irq_tables.o
+end
+
+if CONFIG_HAVE_ACPI_TABLES
+	object acpi_tables.o
+	object fadt.o
+	makerule dsdt.c
+		depends "$(CONFIG_MAINBOARD)/acpi/*.asl"
+		action  "iasl -p $(CURDIR)/dsdt -tc $(CONFIG_MAINBOARD)/acpi/dsdt.asl"
+		action  "mv dsdt.hex dsdt.c"
+	end
+	object ./dsdt.o
+end
+
+#object reset.o
+
+	if CONFIG_USE_INIT
+
+		makerule ./cache_as_ram_auto.o
+			depends "$(CONFIG_MAINBOARD)/cache_as_ram_auto.c option_table.h"
+			action "$(CC) $(DISTRO_CFLAGS) $(CFLAGS) $(CPPFLAGS) -I$(TOP)/src -I. -c $(CONFIG_MAINBOARD)/cache_as_ram_auto.c -o $@"
+		end
+
+	else
+
+		makerule ./cache_as_ram_auto.inc
+			depends "$(CONFIG_MAINBOARD)/cache_as_ram_auto.c option_table.h"
+			action "$(CC) $(DISTRO_CFLAGS) $(CFLAGS) $(CPPFLAGS) $(DEBUG_CFLAGS) -I$(TOP)/src -I. -c -S $(CONFIG_MAINBOARD)/cache_as_ram_auto.c -o $@"
+			action "perl -e 's/\.rodata/.rom.data/g' -pi $@"
+			action "perl -e 's/\.text/.section .rom.text/g' -pi $@"
+		end
+
+	end
+
+##
+## Build our 16 bit and 32 bit coreboot entry code
+##
+mainboardinit cpu/x86/16bit/entry16.inc
+mainboardinit cpu/x86/32bit/entry32.inc
+ldscript /cpu/x86/16bit/entry16.lds
+	if CONFIG_USE_INIT
+		ldscript /cpu/x86/32bit/entry32.lds
+	end
+
+	if CONFIG_USE_INIT
+		ldscript      /cpu/amd/car/cache_as_ram.lds
+	end
+
+##
+## Build our reset vector (This is where coreboot is entered)
+##
+if CONFIG_USE_FALLBACK_IMAGE
+	mainboardinit cpu/x86/16bit/reset16.inc
+	ldscript /cpu/x86/16bit/reset16.lds
+else
+	mainboardinit cpu/x86/32bit/reset32.inc
+	ldscript /cpu/x86/32bit/reset32.lds
+end
+
+##
+## Include an id string (For safe flashing)
+##
+mainboardinit arch/i386/lib/id.inc
+ldscript /arch/i386/lib/id.lds
+
+	##
+	## Setup Cache-As-Ram
+	##
+	mainboardinit cpu/amd/car/cache_as_ram.inc
+
+###
+### This is the early phase of coreboot startup
+### Things are delicate and we test to see if we should
+### failover to another image.
+###
+if CONFIG_USE_FALLBACK_IMAGE
+		ldscript /arch/i386/lib/failover.lds
+end
+
+###
+### O.k. We aren't just an intermediary anymore!
+###
+
+##
+## Setup RAM
+##
+	if CONFIG_USE_INIT
+		initobject cache_as_ram_auto.o
+	else
+		mainboardinit ./cache_as_ram_auto.inc
+	end
+
+##
+## Include the secondary Configuration files
+##
+config chip.h
+
+#The variables belong to mainboard are defined here.
+
+#Define gpp_configuration,	A=0, B=1, C=2, D=3, E=4(default)
+#Define vga_rom_address = 0xfff80000
+#Define port_enable, (bit map): GFX(2,3), GPP(4,5,6,7)
+#Define gfx_dev2_dev3, 0: a link will never be established on Dev2 or Dev3,
+#					   1: the system allows a PCIE link to be established on Dev2 or Dev3.
+#Define gfx_dual_slot, 0: single slot, 1: dual slot
+#Define gfx_lane_reversal, 0: disable lane reversal, 1: enable
+#Define gfx_tmds, 0: didn't support TMDS, 1: support
+#Define gfx_compliance, 0: didn't support compliance, 1: support
+#Define gfx_reconfiguration, 0: short reconfiguration, 1(default): long reconfiguration
+#Define gfx_link_width, 0: x16, 1: x1, 2: x2, 3: x4, 4: x8, 5: x12 (not supported), 6: x16
+chip northbridge/amd/amdk8/root_complex
+	device apic_cluster 0 on
+		chip cpu/amd/socket_S1G1
+		device apic 0 on end
+		end
+	end
+	device pci_domain 0 on
+		chip northbridge/amd/amdk8
+			device pci 18.0 on #  southbridge
+				chip southbridge/amd/rs690
+					device pci 0.0 on end # HT  	0x7910
+					device pci 1.0 on  # Internal Graphics P2P bridge 0x7912
+						chip drivers/pci/onboard
+							device pci 5.0 on end	# Internal Graphics 0x791F
+							register "rom_address" = "0xfff80000" #512KB
+							#register "rom_address" = "0xfff00000" #1024KB
+							#register "rom_address" = "0xffe00000" #2048KB
+							#register "rom_address" = "0xffc00000" #4096KB
+						end
+					end
+					device pci 2.0 on end # PCIE P2P bridge (external graphics) 0x7913
+					device pci 3.0 off end # PCIE P2P bridge	0x791b
+					device pci 4.0 on end # PCIE P2P bridge 0x7914
+					device pci 5.0 on end # PCIE P2P bridge 0x7915
+					device pci 6.0 on end # PCIE P2P bridge 0x7916
+					device pci 7.0 on end # PCIE P2P bridge 0x7917
+					device pci 8.0 off end # NB/SB Link P2P bridge
+					register "vga_rom_address" = "0xfff80000"
+					#register "vga_rom_address" = "0xfff00000"
+					#register "vga_rom_address" = "0xffe00000"
+					#register "vga_rom_address" = "0xffc00000"
+					register "gpp_configuration" = "4"
+					register "port_enable" = "0xfc"
+					register "gfx_dev2_dev3" = "1"
+					register "gfx_dual_slot" = "0"
+					register "gfx_lane_reversal" = "0"
+					register "gfx_tmds" = "1"
+					register "gfx_compliance" = "0"
+					register "gfx_reconfiguration" = "0"
+					register "gfx_link_width" = "0"
+				end
+				chip southbridge/amd/sb600 # it is under NB/SB Link, but on the same pri bus
+					device pci 12.0 on end # SATA  0x4380
+					device pci 13.0 on end # USB   0x4387
+					device pci 13.1 on end # USB   0x4388
+					device pci 13.2 on end # USB   0x4389
+					device pci 13.3 on end # USB   0x438a
+					device pci 13.4 on end # USB   0x438b
+					device pci 13.5 on end # USB 2 0x4386
+	 				device pci 14.0 on # SM        0x4385
+						chip drivers/generic/generic #dimm 0-0-0
+							device i2c 50 on end
+						end
+						chip drivers/generic/generic #dimm 0-0-1
+							device i2c 51 on end
+						end
+						chip drivers/generic/generic #dimm 0-1-0
+							device i2c 52 on end
+						end
+						chip drivers/generic/generic #dimm 0-1-1
+							device i2c 53 on end
+						end
+					end # SM
+					device pci 14.1 on end # IDE    0x438c
+					device pci 14.2 on end # HDA    0x4383
+					device pci 14.3 on # LPC	0x438d
+						chip superio/ite/it8712f
+							device pnp 2e.0 off #  Floppy
+								io 0x60 = 0x3f0
+								irq 0x70 = 6
+								drq 0x74 = 2
+							end
+							device pnp 2e.1 on #  Com1
+								io 0x60 = 0x3f8
+								irq 0x70 = 4
+							end
+							device pnp 2e.2 on #  Com2
+								io 0x60 = 0x2f8
+								irq 0x70 = 3
+							end
+							device pnp 2e.3 on #  Parallel Port
+								io 0x60 = 0x378
+								irq 0x70 = 7
+							end
+							device pnp 2e.4 off end #  EC
+							device pnp 2e.5 on #  Keyboard
+								io 0x60 = 0x60
+								io 0x62 = 0x64
+								irq 0x70 = 1
+							end
+							device pnp 2e.6 on #  Mouse
+								irq 0x70 = 12
+							end
+							device pnp 2e.7 off #  GPIO, must be closed for unresolved reason.
+							end
+							device pnp 2e.8 off #  MIDI
+								io 0x60 = 0x300
+								irq 0x70 = 9
+							end
+							device pnp 2e.9 off #  GAME
+								io 0x60 = 0x220
+							end
+							device pnp 2e.a off end #  CIR
+						end	#superio/ite/it8712f
+					end		#LPC
+					device pci 14.4 on end # PCI 0x4384
+					device pci 14.5 on end # ACI 0x4382
+					device pci 14.6 on end # MCI 0x438e
+					register "ide0_enable" = "1"
+					register "sata0_enable" = "1"
+					register "hda_viddid" = "0x10ec0882"
+				end	#southbridge/amd/sb600
+			end #  device pci 18.0
+
+			device pci 18.0 on end
+			device pci 18.0 on end
+			device pci 18.1 on end
+			device pci 18.2 on end
+			device pci 18.3 on end
+		end		#northbridge/amd/amdk8
+	end #pci_domain
+end		#northbridge/amd/amdk8/root_complex
+
Index: src/mainboard/technexion/tim5690/devicetree.cb
===================================================================
--- src/mainboard/technexion/tim5690/devicetree.cb	(revision 0)
+++ src/mainboard/technexion/tim5690/devicetree.cb	(revision 0)
@@ -0,0 +1,128 @@
+#Define gpp_configuration,	A=0, B=1, C=2, D=3, E=4(default)
+#Define vga_rom_address = 0xfff80000
+#Define port_enable, (bit map): GFX(2,3), GPP(4,5,6,7)
+#Define gfx_dev2_dev3, 0: a link will never be established on Dev2 or Dev3,
+#			1: the system allows a PCIE link to be established on Dev2 or Dev3.
+#Define gfx_dual_slot, 0: single slot, 1: dual slot
+#Define gfx_lane_reversal, 0: disable lane reversal, 1: enable
+#Define gfx_tmds, 0: didn't support TMDS, 1: support
+#Define gfx_compliance, 0: didn't support compliance, 1: support
+#Define gfx_reconfiguration, 0: short reconfiguration, 1(default): long reconfiguration
+#Define gfx_link_width, 0: x16, 1: x1, 2: x2, 3: x4, 4: x8, 5: x12 (not supported), 6: x16
+chip northbridge/amd/amdk8/root_complex
+	device apic_cluster 0 on
+		chip cpu/amd/socket_S1G1
+		device apic 0 on end
+		end
+	end
+	device pci_domain 0 on
+		chip northbridge/amd/amdk8
+			device pci 18.0 on #  southbridge
+				chip southbridge/amd/rs690
+					device pci 0.0 on end # HT  	0x7910
+					device pci 1.0 on  # Internal Graphics P2P bridge 0x7912
+						chip drivers/pci/onboard
+							device pci 5.0 on end	# Internal Graphics 0x791F
+							register "rom_address" = "0xfff80000"
+						end
+					end
+					device pci 2.0 on end # PCIE P2P bridge (external graphics) 0x7913
+					device pci 3.0 off end # PCIE P2P bridge	0x791b
+					device pci 4.0 on end # PCIE P2P bridge 0x7914
+					device pci 5.0 on end # PCIE P2P bridge 0x7915
+					device pci 6.0 on end # PCIE P2P bridge 0x7916
+					device pci 7.0 on end # PCIE P2P bridge 0x7917
+					device pci 8.0 off end # NB/SB Link P2P bridge
+					register "vga_rom_address" = "0xfff80000"
+					register "gpp_configuration" = "4"
+					register "port_enable" = "0xfc"
+					register "gfx_dev2_dev3" = "1"
+					register "gfx_dual_slot" = "0"
+					register "gfx_lane_reversal" = "0"
+					register "gfx_tmds" = "0"
+					register "gfx_compliance" = "0"
+					register "gfx_reconfiguration" = "1"
+					register "gfx_link_width" = "0"
+				end
+				chip southbridge/amd/sb600 # it is under NB/SB Link, but on the same pri bus
+					device pci 12.0 on end # SATA  0x4380
+					device pci 13.0 on end # USB   0x4387
+					device pci 13.1 on end # USB   0x4388
+					device pci 13.2 on end # USB   0x4389
+					device pci 13.3 on end # USB   0x438a
+					device pci 13.4 on end # USB   0x438b
+					device pci 13.5 on end # USB 2 0x4386
+	 				device pci 14.0 on # SM        0x4385
+						chip drivers/generic/generic #dimm 0-0-0
+							device i2c 50 on end
+						end
+						chip drivers/generic/generic #dimm 0-0-1
+							device i2c 51 on end
+						end
+						chip drivers/generic/generic #dimm 0-1-0
+							device i2c 52 on end
+						end
+						chip drivers/generic/generic #dimm 0-1-1
+							device i2c 53 on end
+						end
+					end # SM
+					device pci 14.1 on end # IDE    0x438c
+					device pci 14.2 on end # HDA    0x4383
+					device pci 14.3 on # LPC	0x438d
+						chip superio/ite/it8712f
+							device pnp 2e.0 off #  Floppy
+								io 0x60 = 0x3f0
+								irq 0x70 = 6
+								drq 0x74 = 2
+							end
+							device pnp 2e.1 on #  Com1
+								io 0x60 = 0x3f8
+								irq 0x70 = 4
+							end
+							device pnp 2e.2 off #  Com2
+								io 0x60 = 0x2f8
+								irq 0x70 = 3
+							end
+							device pnp 2e.3 off #  Parallel Port
+								io 0x60 = 0x378
+								irq 0x70 = 7
+							end
+							device pnp 2e.4 off end #  EC
+							device pnp 2e.5 on #  Keyboard
+								io 0x60 = 0x60
+								io 0x62 = 0x64
+								irq 0x70 = 1
+							end
+							device pnp 2e.6 on #  Mouse
+								irq 0x70 = 12
+							end
+							device pnp 2e.7 off #  GPIO, must be closed for unresolved reason.
+							end
+							device pnp 2e.8 off #  MIDI
+								io 0x60 = 0x300
+								irq 0x70 = 9
+							end
+							device pnp 2e.9 off #  GAME
+								io 0x60 = 0x220
+							end
+							device pnp 2e.a off end #  CIR
+						end	#superio/ite/it8712f
+					end		#LPC
+					device pci 14.4 on end # PCI 0x4384
+					device pci 14.5 on end # ACI 0x4382
+					device pci 14.6 on end # MCI 0x438e
+					register "ide0_enable" = "1"
+					register "sata0_enable" = "1"
+					register "hda_viddid" = "0x10ec0882"
+				end	#southbridge/amd/sb600
+			end #  device pci 18.0
+
+			device pci 18.0 on end
+			device pci 18.0 on end
+			device pci 18.1 on end
+			device pci 18.2 on end
+			device pci 18.3 on end
+		end		#northbridge/amd/amdk8
+	end #pci_domain
+end		#northbridge/amd/amdk8/root_complex
+
Index: src/mainboard/technexion/tim5690/mptable.c
===================================================================
--- src/mainboard/technexion/tim5690/mptable.c	(revision 0)
+++ src/mainboard/technexion/tim5690/mptable.c	(revision 0)
@@ -0,0 +1,212 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2008 Advanced Micro Devices, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301 USA
+ */
+
+#include <console/console.h>
+#include <arch/smp/mpspec.h>
+#include <device/pci.h>
+#include <arch/io.h>
+#include <string.h>
+#include <stdint.h>
+
+#include <cpu/amd/amdk8_sysconf.h>
+
+extern u8 bus_isa;
+extern u8 bus_rs690[8];
+extern u8 bus_sb600[2];
+
+extern u32 apicid_sb600;
+
+extern u32 bus_type[256];
+extern u32 sbdn_rs690;
+extern u32 sbdn_sb600;
+
+extern void get_bus_conf(void);
+
+void *smp_write_config_table(void *v)
+{
+	static const char sig[4] = "PCMP";
+	static const char oem[8] = "ATI     ";
+	static const char productid[12] = "TIM5690     ";
+	struct mp_config_table *mc;
+	int j;
+
+	mc = (void *)(((char *)v) + SMP_FLOATING_TABLE_LEN);
+	memset(mc, 0, sizeof(*mc));
+
+	memcpy(mc->mpc_signature, sig, sizeof(sig));
+	mc->mpc_length = sizeof(*mc);	/* initially just the header */
+	mc->mpc_spec = 0x04;
+	mc->mpc_checksum = 0;	/* not yet computed */
+	memcpy(mc->mpc_oem, oem, sizeof(oem));
+	memcpy(mc->mpc_productid, productid, sizeof(productid));
+	mc->mpc_oemptr = 0;
+	mc->mpc_oemsize = 0;
+	mc->mpc_entry_count = 0;	/* No entries yet... */
+	mc->mpc_lapic = LAPIC_ADDR;
+	mc->mpe_length = 0;
+	mc->mpe_checksum = 0;
+	mc->reserved = 0;
+
+	smp_write_processors(mc);
+
+	get_bus_conf();
+
+	/* Bus:         Bus ID  Type */
+	/* define bus and isa numbers */
+	for (j = 0; j < bus_isa; j++) {
+		smp_write_bus(mc, j, (char *)"PCI   ");
+	}
+	smp_write_bus(mc, bus_isa, (char *)"ISA   ");
+
+	/* I/O APICs:   APIC ID Version State   Address */
+	{
+		device_t dev;
+		u32 dword;
+		u8 byte;
+
+		dev =
+		    dev_find_slot(bus_sb600[0],
+				  PCI_DEVFN(sbdn_sb600 + 0x14, 0));
+		if (dev) {
+			dword = pci_read_config32(dev, 0x74) & 0xfffffff0;
+			smp_write_ioapic(mc, apicid_sb600, 0x11, dword);
+
+			/* Initialize interrupt mapping */
+			/* aza */
+			byte = pci_read_config8(dev, 0x63);
+			byte &= 0xf8;
+			byte |= 0;	/* 0: INTA, ...., 7: INTH */
+			pci_write_config8(dev, 0x63, byte);
+
+			/* SATA */
+			dword = pci_read_config32(dev, 0xac);
+			dword &= ~(7 << 26);
+			dword |= 6 << 26;	/* 0: INTA, ...., 7: INTH */
+			/* dword |= 1<<22; PIC and APIC co exists */
+			pci_write_config32(dev, 0xac, dword);
+
+			/*
+			 * 00:12.0: PROG SATA : INT F
+			 * 00:13.0: INTA USB_0
+			 * 00:13.1: INTB USB_1
+			 * 00:13.2: INTC USB_2
+			 * 00:13.3: INTD USB_3
+			 * 00:13.4: INTC USB_4
+			 * 00:13.5: INTD USB2
+			 * 00:14.1: INTA IDE
+			 * 00:14.2: Prog HDA : INT E
+			 * 00:14.5: INTB ACI
+			 * 00:14.6: INTB MCI
+			 */
+		}
+	}
+
+	/* I/O Ints:    Type    Polarity    Trigger     Bus ID   IRQ    APIC ID PIN# */
+#define IO_LOCAL_INT(type, intr, apicid, pin) \
+	smp_write_intsrc(mc, (type), MP_IRQ_TRIGGER_EDGE | MP_IRQ_POLARITY_HIGH, bus_isa, (intr), (apicid), (pin));
+
+	IO_LOCAL_INT(mp_ExtINT, 0x0, apicid_sb600, 0x0);
+
+	/* ISA ints are edge-triggered, and usually originate from the ISA bus,
+	 * or its remainings.
+	 */
+#define ISA_INT(intr, pin) \
+	smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH,  bus_isa, (intr), apicid_sb600, (pin))
+
+	ISA_INT(0x1, 0x1);
+	ISA_INT(0x0, 0x2);
+	ISA_INT(0x3, 0x3);
+	ISA_INT(0x4, 0x4);
+	ISA_INT(0x6, 0x6);
+	ISA_INT(0x7, 0x7);
+	ISA_INT(0xc, 0xc);
+	ISA_INT(0xd, 0xd);
+	ISA_INT(0xe, 0xe);
+
+	/* PCI interrupts are level triggered, and are
+	 * associated with a specific bus/device/function tuple.
+	 */
+#if CONFIG_HAVE_ACPI_TABLES == 0
+#define PCI_INT(bus, dev, fn, pin) \
+        smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, (bus), (((dev)<<2)|(fn)), apicid_sb600, (pin))
+#else
+#define PCI_INT(bus, dev, fn, pin)
+#endif
+
+	/* usb */
+	PCI_INT(0x0, 0x13, 0x0, 0x10);
+	PCI_INT(0x0, 0x13, 0x1, 0x11);
+	PCI_INT(0x0, 0x13, 0x2, 0x12);
+	PCI_INT(0x0, 0x13, 0x3, 0x13);
+
+	/* sata */
+	PCI_INT(0x0, 0x12, 0x0, 0x16);
+
+	/* HD Audio: b0:d20:f1:reg63 should be 0. */
+	PCI_INT(0x0, 0x14, 0x0, 0x10);
+
+	/* on board NIC & Slot PCIE.  */
+	PCI_INT(bus_rs690[1], 0x5, 0x0, 0x12);
+	PCI_INT(bus_rs690[1], 0x5, 0x1, 0x13);
+	PCI_INT(bus_rs690[2], 0x0, 0x0, 0x12);
+	PCI_INT(bus_rs690[3], 0x0, 0x0, 0x13);
+	PCI_INT(bus_rs690[4], 0x0, 0x0, 0x10);
+	PCI_INT(bus_rs690[5], 0x0, 0x0, 0x11);
+	PCI_INT(bus_rs690[6], 0x0, 0x0, 0x12);
+	PCI_INT(bus_rs690[7], 0x0, 0x0, 0x13);
+
+	/* PCI slots */
+	/* PCI_SLOT 0. */
+	PCI_INT(bus_sb600[1], 0x5, 0x0, 0x14);
+	PCI_INT(bus_sb600[1], 0x5, 0x1, 0x15);
+	PCI_INT(bus_sb600[1], 0x5, 0x2, 0x16);
+	PCI_INT(bus_sb600[1], 0x5, 0x3, 0x17);
+
+	/* PCI_SLOT 1. */
+	PCI_INT(bus_sb600[1], 0x6, 0x0, 0x15);
+	PCI_INT(bus_sb600[1], 0x6, 0x1, 0x16);
+	PCI_INT(bus_sb600[1], 0x6, 0x2, 0x17);
+	PCI_INT(bus_sb600[1], 0x6, 0x3, 0x14);
+
+	/* PCI_SLOT 2. */
+	PCI_INT(bus_sb600[1], 0x7, 0x0, 0x16);
+	PCI_INT(bus_sb600[1], 0x7, 0x1, 0x17);
+	PCI_INT(bus_sb600[1], 0x7, 0x2, 0x14);
+	PCI_INT(bus_sb600[1], 0x7, 0x3, 0x15);
+
+	/*Local Ints:   Type    Polarity    Trigger     Bus ID   IRQ    APIC ID PIN# */
+	IO_LOCAL_INT(mp_ExtINT, 0x0, MP_APIC_ALL, 0x0);
+	IO_LOCAL_INT(mp_NMI, 0x0, MP_APIC_ALL, 0x1);
+	/* There is no extension information... */
+
+	/* Compute the checksums */
+	mc->mpe_checksum =
+	    smp_compute_checksum(smp_next_mpc_entry(mc), mc->mpe_length);
+	mc->mpc_checksum = smp_compute_checksum(mc, mc->mpc_length);
+	printk_debug("Wrote the mp table end at: %p - %p\n",
+		     mc, smp_next_mpe_entry(mc));
+	return smp_next_mpe_entry(mc);
+}
+
+unsigned long write_smp_table(unsigned long addr)
+{
+	void *v;
+	v = smp_write_floating_table(addr);
+	return (unsigned long)smp_write_config_table(v);
+}
Index: src/mainboard/technexion/tim5690/irq_tables.c
===================================================================
--- src/mainboard/technexion/tim5690/irq_tables.c	(revision 0)
+++ src/mainboard/technexion/tim5690/irq_tables.c	(revision 0)
@@ -0,0 +1,119 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2008 Advanced Micro Devices, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301 USA
+ */
+
+/* This file was generated by getpir.c, do not modify!
+   (but if you do, please run checkpir on it to verify)
+   Contains the IRQ Routing Table dumped directly from your memory , wich BIOS sets up
+
+   Documentation at : http://www.microsoft.com/hwdev/busbios/PCIIRQ.HTM
+*/
+#include <console/console.h>
+#include <device/pci.h>
+#include <string.h>
+#include <stdint.h>
+#include <arch/pirq_routing.h>
+
+#include <cpu/amd/amdk8_sysconf.h>
+
+extern void get_bus_conf(void);
+
+static void write_pirq_info(struct irq_info *pirq_info, u8 bus, u8 devfn,
+			    u8 link0, u16 bitmap0, u8 link1, u16 bitmap1,
+			    u8 link2, u16 bitmap2, u8 link3, u16 bitmap3,
+			    u8 slot, u8 rfu)
+{
+	pirq_info->bus = bus;
+	pirq_info->devfn = devfn;
+	pirq_info->irq[0].link = link0;
+	pirq_info->irq[0].bitmap = bitmap0;
+	pirq_info->irq[1].link = link1;
+	pirq_info->irq[1].bitmap = bitmap1;
+	pirq_info->irq[2].link = link2;
+	pirq_info->irq[2].bitmap = bitmap2;
+	pirq_info->irq[3].link = link3;
+	pirq_info->irq[3].bitmap = bitmap3;
+	pirq_info->slot = slot;
+	pirq_info->rfu = rfu;
+}
+extern u8 bus_isa;
+extern u8 bus_rs690[8];
+extern u8 bus_sb600[2];
+extern unsigned long sbdn_sb600;
+
+unsigned long write_pirq_routing_table(unsigned long addr)
+{
+	struct irq_routing_table *pirq;
+	struct irq_info *pirq_info;
+	u32 slot_num;
+	u8 *v;
+
+	u8 sum = 0;
+	int i;
+
+	get_bus_conf();		/* it will find out all bus num and apic that share with mptable.c and mptable.c and acpi_tables.c */
+
+	/* Align the table to be 16 byte aligned. */
+	addr += 15;
+	addr &= ~15;
+
+	/* This table must be betweeen 0xf0000 & 0x100000 */
+	printk_info("Writing IRQ routing tables to 0x%lx...", addr);
+
+	pirq = (void *)(addr);
+	v = (u8 *) (addr);
+
+	pirq->signature = PIRQ_SIGNATURE;
+	pirq->version = PIRQ_VERSION;
+
+	pirq->rtr_bus = bus_sb600[0];
+	pirq->rtr_devfn = ((sbdn_sb600 + 0x14) << 3) | 4;
+
+	pirq->exclusive_irqs = 0;
+
+	pirq->rtr_vendor = 0x1002;
+	pirq->rtr_device = 0x4384;
+
+	pirq->miniport_data = 0;
+
+	memset(pirq->rfu, 0, sizeof(pirq->rfu));
+
+	pirq_info = (void *)(&pirq->checksum + 1);
+	slot_num = 0;
+
+	/* pci bridge */
+	write_pirq_info(pirq_info, bus_sb600[0], ((sbdn_sb600 + 0x14) << 3) | 4,
+			0x1, 0xdef8, 0x2, 0xdef8, 0x3, 0xdef8, 0x4, 0xdef8, 0,
+			0);
+	pirq_info++;
+	slot_num++;
+
+	pirq->size = 32 + 16 * slot_num;
+
+	for (i = 0; i < pirq->size; i++)
+		sum += v[i];
+
+	sum = pirq->checksum - sum;
+	if (sum != pirq->checksum) {
+		pirq->checksum = sum;
+	}
+
+	printk_info("write_pirq_routing_table done.\n");
+
+	return (unsigned long)pirq_info;
+}
Index: src/mainboard/technexion/tim5690/resourcemap.c
===================================================================
--- src/mainboard/technexion/tim5690/resourcemap.c	(revision 0)
+++ src/mainboard/technexion/tim5690/resourcemap.c	(revision 0)
@@ -0,0 +1,278 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2008 Advanced Micro Devices, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301 USA
+ */
+
+static void setup_tim5690_resource_map(void)
+{
+	static const unsigned int register_values[] = {
+		/* Careful set limit registers before base registers which contain the enables */
+		/* DRAM Limit i Registers
+		* F1:0x44 i = 0
+		* F1:0x4C i = 1
+		* F1:0x54 i = 2
+		* F1:0x5C i = 3
+		* F1:0x64 i = 4
+		* F1:0x6C i = 5
+		* F1:0x74 i = 6
+		* F1:0x7C i = 7
+		* [ 2: 0] Destination Node ID
+		*	000 = Node 0
+		*	001 = Node 1
+		*	010 = Node 2
+		*	011 = Node 3
+		*	100 = Node 4
+		*	101 = Node 5
+		*	110 = Node 6
+		*	111 = Node 7
+		* [ 7: 3] Reserved
+		* [10: 8] Interleave select
+		*	specifies the values of A[14:12] to use with interleave enable.
+		* [15:11] Reserved
+		* [31:16] DRAM Limit Address i Bits 39-24
+		*	This field defines the upper address bits of a 40 bit  address
+		*	that define the end of the DRAM region.
+		*/
+		PCI_ADDR(0, 0x18, 1, 0x44), 0x0000f8f8, 0x00000000,
+		PCI_ADDR(0, 0x18, 1, 0x4C), 0x0000f8f8, 0x00000001,
+		PCI_ADDR(0, 0x18, 1, 0x54), 0x0000f8f8, 0x00000002,
+		PCI_ADDR(0, 0x18, 1, 0x5C), 0x0000f8f8, 0x00000003,
+		PCI_ADDR(0, 0x18, 1, 0x64), 0x0000f8f8, 0x00000004,
+		PCI_ADDR(0, 0x18, 1, 0x6C), 0x0000f8f8, 0x00000005,
+		PCI_ADDR(0, 0x18, 1, 0x74), 0x0000f8f8, 0x00000006,
+		PCI_ADDR(0, 0x18, 1, 0x7C), 0x0000f8f8, 0x00000007,
+		/* DRAM Base i Registers
+		* F1:0x40 i = 0
+		* F1:0x48 i = 1
+		* F1:0x50 i = 2
+		* F1:0x58 i = 3
+		* F1:0x60 i = 4
+		* F1:0x68 i = 5
+		* F1:0x70 i = 6
+		* F1:0x78 i = 7
+		* [ 0: 0] Read Enable
+		*	0 = Reads Disabled
+		*	1 = Reads Enabled
+		* [ 1: 1] Write Enable
+		*	0 = Writes Disabled
+		*	1 = Writes Enabled
+		* [ 7: 2] Reserved
+		* [10: 8] Interleave Enable
+		*	000 = No interleave
+		*	001 = Interleave on A[12] (2 nodes)
+		*	010 = reserved
+		*	011 = Interleave on A[12] and A[14] (4 nodes)
+		*	100 = reserved
+		*	101 = reserved
+		*	110 = reserved
+		*	111 = Interleve on A[12] and A[13] and A[14] (8 nodes)
+		* [15:11] Reserved
+		* [13:16] DRAM Base Address i Bits 39-24
+		*	This field defines the upper address bits of a 40-bit address
+		*	that define the start of the DRAM region.
+		*/
+		PCI_ADDR(0, 0x18, 1, 0x40), 0x0000f8fc, 0x00000000,
+		PCI_ADDR(0, 0x18, 1, 0x48), 0x0000f8fc, 0x00000000,
+		PCI_ADDR(0, 0x18, 1, 0x50), 0x0000f8fc, 0x00000000,
+		PCI_ADDR(0, 0x18, 1, 0x58), 0x0000f8fc, 0x00000000,
+		PCI_ADDR(0, 0x18, 1, 0x60), 0x0000f8fc, 0x00000000,
+		PCI_ADDR(0, 0x18, 1, 0x68), 0x0000f8fc, 0x00000000,
+		PCI_ADDR(0, 0x18, 1, 0x70), 0x0000f8fc, 0x00000000,
+		PCI_ADDR(0, 0x18, 1, 0x78), 0x0000f8fc, 0x00000000,
+
+		/* Memory-Mapped I/O Limit i Registers
+		 * F1:0x84 i = 0
+		 * F1:0x8C i = 1
+		 * F1:0x94 i = 2
+		 * F1:0x9C i = 3
+		 * F1:0xA4 i = 4
+		 * F1:0xAC i = 5
+		 * F1:0xB4 i = 6
+		 * F1:0xBC i = 7
+		 * [ 2: 0] Destination Node ID
+		 *	000 = Node 0
+		 *	001 = Node 1
+		 *	010 = Node 2
+		 *	011 = Node 3
+		 *	100 = Node 4
+		 *	101 = Node 5
+		 *	110 = Node 6
+		 *	111 = Node 7
+		 * [ 3: 3] Reserved
+		 * [ 5: 4] Destination Link ID
+		 *	00 = Link 0
+		 *	01 = Link 1
+		 *	10 = Link 2
+		 *	11 = Reserved
+		 * [ 6: 6] Reserved
+		 * [ 7: 7] Non-Posted
+		 *	0 = CPU writes may be posted
+		 *	1 = CPU writes must be non-posted
+		 * [31: 8] Memory-Mapped I/O Limit Address i (39-16)
+		 *	This field defines the upp adddress bits of a 40-bit address that
+		 *	defines the end of a memory-mapped I/O region n
+		 */
+		PCI_ADDR(0, 0x18, 1, 0x84), 0x00000048, 0x00000000,
+		PCI_ADDR(0, 0x18, 1, 0x8C), 0x00000048, 0x00000000,
+		PCI_ADDR(0, 0x18, 1, 0x94), 0x00000048, 0x00000000,
+		PCI_ADDR(0, 0x18, 1, 0x9C), 0x00000048, 0x00000000,
+		PCI_ADDR(0, 0x18, 1, 0xA4), 0x00000048, 0x00000000,
+		PCI_ADDR(0, 0x18, 1, 0xAC), 0x00000048, 0x00000000,
+		PCI_ADDR(0, 0x18, 1, 0xB4), 0x00000048, 0x00000000,
+		PCI_ADDR(0, 0x18, 1, 0xBC), 0x00000048, 0x00ffff00,
+
+		/* Memory-Mapped I/O Base i Registers
+		* F1:0x80 i = 0
+		* F1:0x88 i = 1
+		* F1:0x90 i = 2
+		* F1:0x98 i = 3
+		* F1:0xA0 i = 4
+		* F1:0xA8 i = 5
+		* F1:0xB0 i = 6
+		* F1:0xB8 i = 7
+		* [ 0: 0] Read Enable
+		*	0 = Reads disabled
+		*	1 = Reads Enabled
+		* [ 1: 1] Write Enable
+		*	0 = Writes disabled
+		*	1 = Writes Enabled
+		* [ 2: 2] Cpu Disable
+		*	0 = Cpu can use this I/O range
+		*	1 = Cpu requests do not use this I/O range
+		* [ 3: 3] Lock
+		*	0 = base/limit registers i are read/write
+		*	1 = base/limit registers i are read-only
+		* [ 7: 4] Reserved
+		* [31: 8] Memory-Mapped I/O Base Address i (39-16)
+		*	This field defines the upper address bits of a 40bit address
+		*	that defines the start of memory-mapped I/O region i
+		*/
+		PCI_ADDR(0, 0x18, 1, 0x80), 0x000000f0, 0x00000000,
+		PCI_ADDR(0, 0x18, 1, 0x88), 0x000000f0, 0x00000000,
+		PCI_ADDR(0, 0x18, 1, 0x90), 0x000000f0, 0x00000000,
+		PCI_ADDR(0, 0x18, 1, 0x98), 0x000000f0, 0x00000000,
+		PCI_ADDR(0, 0x18, 1, 0xA0), 0x000000f0, 0x00000000,
+		PCI_ADDR(0, 0x18, 1, 0xA8), 0x000000f0, 0x00000000,
+		PCI_ADDR(0, 0x18, 1, 0xB0), 0x000000f0, 0x00000000,
+		PCI_ADDR(0, 0x18, 1, 0xB8), 0x000000f0, 0x00fc0003,
+
+		/* PCI I/O Limit i Registers
+		* F1:0xC4 i = 0
+		* F1:0xCC i = 1
+		* F1:0xD4 i = 2
+		* F1:0xDC i = 3
+		* [ 2: 0] Destination Node ID
+		*	000 = Node 0
+		*	001 = Node 1
+		*	010 = Node 2
+		*	011 = Node 3
+		*	100 = Node 4
+		*	101 = Node 5
+		*	110 = Node 6
+		*	111 = Node 7
+		* [ 3: 3] Reserved
+		* [ 5: 4] Destination Link ID
+		*	00 = Link 0
+		*	01 = Link 1
+		*	10 = Link 2
+		*	11 = reserved
+		* [11: 6] Reserved
+		* [24:12] PCI I/O Limit Address i
+		*	This field defines the end of PCI I/O region n
+		* [31:25] Reserved
+		*/
+		PCI_ADDR(0, 0x18, 1, 0xC4), 0xFE000FC8, 0x01fff000,
+		PCI_ADDR(0, 0x18, 1, 0xCC), 0xFE000FC8, 0x00000000,
+		PCI_ADDR(0, 0x18, 1, 0xD4), 0xFE000FC8, 0x00000000,
+		PCI_ADDR(0, 0x18, 1, 0xDC), 0xFE000FC8, 0x00000000,
+
+		/* PCI I/O Base i Registers
+		 * F1:0xC0 i = 0
+		 * F1:0xC8 i = 1
+		 * F1:0xD0 i = 2
+		 * F1:0xD8 i = 3
+		 * [ 0: 0] Read Enable
+		 *	0 = Reads Disabled
+		 *	1 = Reads Enabled
+		 * [ 1: 1] Write Enable
+		 *	0 = Writes Disabled
+		 *	1 = Writes Enabled
+		 * [ 3: 2] Reserved
+		 * [ 4: 4] VGA Enable
+		 *	0 = VGA matches Disabled
+		 *	1 = matches all address < 64K and where A[9:0] is in the
+		 *	range 3B0-3BB or 3C0-3DF independen of the base & limit registers
+		 * [ 5: 5] ISA Enable
+		 *	0 = ISA matches Disabled
+		 *	1 = Blocks address < 64K and in the last 768 bytes of eack 1K block
+		 *	from matching agains this base/limit pair
+		 * [11: 6] Reserved
+		 * [24:12] PCI I/O Base i
+		 *	This field defines the start of PCI I/O region n
+		 * [31:25] Reserved
+		 */
+		PCI_ADDR(0, 0x18, 1, 0xC0), 0xFE000FCC, 0x00000003,
+		PCI_ADDR(0, 0x18, 1, 0xC8), 0xFE000FCC, 0x00000000,
+		PCI_ADDR(0, 0x18, 1, 0xD0), 0xFE000FCC, 0x00000000,
+		PCI_ADDR(0, 0x18, 1, 0xD8), 0xFE000FCC, 0x00000000,
+
+		/* Config Base and Limit i Registers
+		 * F1:0xE0 i = 0
+		 * F1:0xE4 i = 1
+		 * F1:0xE8 i = 2
+		 * F1:0xEC i = 3
+		 * [ 0: 0] Read Enable
+		 *	0 = Reads Disabled
+		 *	1 = Reads Enabled
+		 * [ 1: 1] Write Enable
+		 *	0 = Writes Disabled
+		 *	1 = Writes Enabled
+		 * [ 2: 2] Device Number Compare Enable
+		 *	0 = The ranges are based on bus number
+		 *	1 = The ranges are ranges of devices on bus 0
+		 * [ 3: 3] Reserved
+		 * [ 6: 4] Destination Node
+		 *	000 = Node 0
+		 *	001 = Node 1
+		 *	010 = Node 2
+		 *	011 = Node 3
+		 *	100 = Node 4
+		 *	101 = Node 5
+		 *	110 = Node 6
+		 *	111 = Node 7
+		 * [ 7: 7] Reserved
+		 * [ 9: 8] Destination Link
+		 *	00 = Link 0
+		 *	01 = Link 1
+		 *	10 = Link 2
+		 *	11 - Reserved
+		 * [15:10] Reserved
+		 * [23:16] Bus Number Base i
+		 *	This field defines the lowest bus number in configuration region i
+		 * [31:24] Bus Number Limit i
+		 *	This field defines the highest bus number in configuration regin i
+		 */
+		PCI_ADDR(0, 0x18, 1, 0xE0), 0x0000FC88, 0x08000003,
+		PCI_ADDR(0, 0x18, 1, 0xE4), 0x0000FC88, 0x00000000,
+		PCI_ADDR(0, 0x18, 1, 0xE8), 0x0000FC88, 0x00000000,
+		PCI_ADDR(0, 0x18, 1, 0xEC), 0x0000FC88, 0x00000000,
+	};
+
+	int max;
+	max = ARRAY_SIZE(register_values);
+	setup_resource_map(register_values, max);
+}
Index: src/mainboard/technexion/tim5690/Options.lb
===================================================================
--- src/mainboard/technexion/tim5690/Options.lb	(revision 0)
+++ src/mainboard/technexion/tim5690/Options.lb	(revision 0)
@@ -0,0 +1,301 @@
+##
+## This file is part of the coreboot project.
+##
+## Copyright (C) 2008 Advanced Micro Devices, Inc.
+##
+## This program is free software; you can redistribute it and/or modify
+## it under the terms of the GNU General Public License as published by
+## the Free Software Foundation; version 2 of the License.
+##
+## This program is distributed in the hope that it will be useful,
+## but WITHOUT ANY WARRANTY; without even the implied warranty of
+## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+## GNU General Public License for more details.
+##
+## You should have received a copy of the GNU General Public License
+## along with this program; if not, write to the Free Software
+## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301 USA
+##
+##
+##
+
+uses CONFIG_HAVE_MP_TABLE
+uses CONFIG_HAVE_PIRQ_TABLE
+uses CONFIG_HAVE_ACPI_TABLES
+uses CONFIG_HAVE_ACPI_RESUME
+uses CONFIG_USE_FALLBACK_IMAGE
+uses CONFIG_HAVE_FALLBACK_BOOT
+uses CONFIG_HAVE_HARD_RESET
+uses CONFIG_IRQ_SLOT_COUNT
+uses CONFIG_HAVE_OPTION_TABLE
+uses CONFIG_MAX_CPUS
+uses CONFIG_MAX_PHYSICAL_CPUS
+uses CONFIG_LOGICAL_CPUS
+uses CONFIG_IOAPIC
+uses CONFIG_SMP
+uses CONFIG_FALLBACK_SIZE
+uses CONFIG_ROM_SIZE
+uses CONFIG_ROM_SECTION_SIZE
+uses CONFIG_ROM_IMAGE_SIZE
+uses CONFIG_ROM_SECTION_SIZE
+uses CONFIG_ROM_SECTION_OFFSET
+uses CONFIG_ROM_PAYLOAD
+uses CONFIG_COMPRESSED_PAYLOAD_LZMA
+uses CONFIG_ROMBASE
+uses CONFIG_XIP_ROM_SIZE
+uses CONFIG_XIP_ROM_BASE
+uses CONFIG_STACK_SIZE
+uses CONFIG_HEAP_SIZE
+uses CONFIG_USE_OPTION_TABLE
+uses CONFIG_LB_CKS_RANGE_START
+uses CONFIG_LB_CKS_RANGE_END
+uses CONFIG_LB_CKS_LOC
+uses CONFIG_MAINBOARD_PART_NUMBER
+uses CONFIG_MAINBOARD_VENDOR
+uses CONFIG_MAINBOARD
+uses CONFIG_MAINBOARD_PCI_SUBSYSTEM_VENDOR_ID
+uses CONFIG_MAINBOARD_PCI_SUBSYSTEM_DEVICE_ID
+uses COREBOOT_EXTRA_VERSION
+uses CONFIG_RAMBASE
+uses CONFIG_TTYS0_BAUD
+uses CONFIG_TTYS0_BASE
+uses CONFIG_TTYS0_LCS
+uses CONFIG_DEFAULT_CONSOLE_LOGLEVEL
+uses CONFIG_MAXIMUM_CONSOLE_LOGLEVEL
+uses CONFIG_MAINBOARD_POWER_ON_AFTER_POWER_FAIL
+uses CONFIG_CONSOLE_SERIAL8250
+uses CONFIG_HAVE_INIT_TIMER
+uses CONFIG_GDB_STUB
+uses CONFIG_GDB_STUB
+uses CONFIG_CROSS_COMPILE
+uses CC
+uses HOSTCC
+uses CONFIG_OBJCOPY
+uses CONFIG_CONSOLE_VGA
+uses CONFIG_PCI_ROM_RUN
+uses CONFIG_HW_MEM_HOLE_SIZEK
+uses CONFIG_HT_CHAIN_UNITID_BASE
+uses CONFIG_HT_CHAIN_END_UNITID_BASE
+uses CONFIG_SB_HT_CHAIN_ON_BUS0
+
+uses CONFIG_USE_DCACHE_RAM
+uses CONFIG_DCACHE_RAM_BASE
+uses CONFIG_DCACHE_RAM_SIZE
+uses CONFIG_DCACHE_RAM_GLOBAL_VAR_SIZE
+uses CONFIG_USE_INIT
+
+uses CONFIG_SB_HT_CHAIN_UNITID_OFFSET_ONLY
+uses CONFIG_USE_PRINTK_IN_CAR
+
+uses CONFIG_VIDEO_MB
+uses CONFIG_GFXUMA
+uses CONFIG_HAVE_MAINBOARD_RESOURCES
+uses CONFIG_VGA_ROM_RUN
+
+###
+### Build options
+###
+
+##
+## CONFIG_ROM_SIZE is the size of boot ROM that this board will use.
+##
+default CONFIG_ROM_SIZE=524288
+
+##
+## CONFIG_FALLBACK_SIZE is the amount of the ROM the complete fallback image will use
+##
+default CONFIG_FALLBACK_SIZE = CONFIG_ROM_IMAGE_SIZE
+
+##
+## Build code for the fallback boot
+##
+default CONFIG_HAVE_FALLBACK_BOOT=1
+
+##
+## Build code to reset the motherboard from coreboot
+##
+default CONFIG_HAVE_HARD_RESET=1
+
+##
+## Build code to export a programmable irq routing table
+##
+default CONFIG_HAVE_PIRQ_TABLE=1
+default CONFIG_IRQ_SLOT_COUNT=11
+
+##
+## Build code to export an x86 MP table
+## Useful for specifying IRQ routing values
+##
+default CONFIG_HAVE_MP_TABLE=1
+
+## ACPI tables will be included
+default CONFIG_HAVE_ACPI_TABLES=1
+
+##
+## Build code to export a CMOS option table
+##
+default CONFIG_HAVE_OPTION_TABLE=0
+
+##
+## Move the default coreboot cmos range off of AMD RTC registers
+##
+default CONFIG_LB_CKS_RANGE_START=49
+default CONFIG_LB_CKS_RANGE_END=122
+default CONFIG_LB_CKS_LOC=123
+
+##
+## Build code for SMP support
+## Only worry about 2 micro processors
+##
+default CONFIG_SMP=1
+default CONFIG_MAX_CPUS=2
+
+default CONFIG_MAX_PHYSICAL_CPUS=1
+default CONFIG_LOGICAL_CPUS=1
+
+#1G memory hole
+default CONFIG_HW_MEM_HOLE_SIZEK=0x100000
+
+#VGA Console
+default CONFIG_CONSOLE_VGA=1
+default CONFIG_PCI_ROM_RUN=1
+default CONFIG_VGA_ROM_RUN=1
+
+# BTDC: Only one HT device on Herring.
+#HT Unit ID offset
+#default CONFIG_HT_CHAIN_UNITID_BASE=0x6
+default CONFIG_HT_CHAIN_UNITID_BASE=0x0
+
+
+#real SB Unit ID
+default CONFIG_HT_CHAIN_END_UNITID_BASE=0x1
+
+#make the SB HT chain on bus 0
+default CONFIG_SB_HT_CHAIN_ON_BUS0=1
+
+##
+## enable CACHE_AS_RAM specifics
+##
+default CONFIG_USE_DCACHE_RAM=1
+default CONFIG_DCACHE_RAM_BASE=0xc8000
+default CONFIG_DCACHE_RAM_SIZE=0x8000
+default CONFIG_DCACHE_RAM_GLOBAL_VAR_SIZE=0x01000
+default CONFIG_USE_INIT=0
+
+##
+## Build code to setup a generic IOAPIC
+##
+default CONFIG_IOAPIC=1
+
+##
+## Clean up the motherboard id strings
+##
+default CONFIG_MAINBOARD_PART_NUMBER="tim5690"
+default CONFIG_MAINBOARD_VENDOR="technexion"
+default CONFIG_MAINBOARD_PCI_SUBSYSTEM_VENDOR_ID=0x1022
+default CONFIG_MAINBOARD_PCI_SUBSYSTEM_DEVICE_ID=0x3050
+
+
+###
+### coreboot layout values
+###
+
+## CONFIG_ROM_IMAGE_SIZE is the amount of space to allow coreboot to occupy.
+default CONFIG_ROM_IMAGE_SIZE = 65536
+
+##
+## Use a small 8K stack
+##
+default CONFIG_STACK_SIZE=0x2000
+
+##
+## Use a small 16K heap
+##
+default CONFIG_HEAP_SIZE=0x4000
+
+##
+## Only use the option table in a normal image
+##
+#default CONFIG_USE_OPTION_TABLE = !CONFIG_USE_FALLBACK_IMAGE
+default CONFIG_USE_OPTION_TABLE = 0
+
+##
+## coreboot C code runs at this location in RAM
+##
+default CONFIG_RAMBASE=0x00004000
+
+##
+## Load the payload from the ROM
+##
+default CONFIG_ROM_PAYLOAD = 1
+
+###
+### Defaults of options that you may want to override in the target config file
+###
+
+##
+## The default compiler
+##
+default CC="$(CONFIG_CROSS_COMPILE)gcc -m32"
+default HOSTCC="gcc"
+
+##
+## Disable the gdb stub by default
+##
+default CONFIG_GDB_STUB=0
+
+
+default CONFIG_USE_PRINTK_IN_CAR=1
+
+##
+## The Serial Console
+##
+
+# To Enable the Serial Console
+default CONFIG_CONSOLE_SERIAL8250=1
+
+## Select the serial console baud rate
+default CONFIG_TTYS0_BAUD=115200
+#default CONFIG_TTYS0_BAUD=57600
+#default CONFIG_TTYS0_BAUD=38400
+#default CONFIG_TTYS0_BAUD=19200
+#default CONFIG_TTYS0_BAUD=9600
+#default CONFIG_TTYS0_BAUD=4800
+#default CONFIG_TTYS0_BAUD=2400
+#default CONFIG_TTYS0_BAUD=1200
+
+# Select the serial console base port
+default CONFIG_TTYS0_BASE=0x3f8
+
+# Select the serial protocol
+# This defaults to 8 data bits, 1 stop bit, and no parity
+default CONFIG_TTYS0_LCS=0x3
+
+##
+### Select the coreboot loglevel
+##
+## EMERG      1   system is unusable
+## ALERT      2   action must be taken immediately
+## CRIT       3   critical conditions
+## ERR        4   error conditions
+## WARNING    5   warning conditions
+## NOTICE     6   normal but significant condition
+## INFO       7   informational
+## CONFIG_DEBUG      8   debug-level messages
+## SPEW       9   Way too many details
+
+## Request this level of debugging output
+default  CONFIG_DEFAULT_CONSOLE_LOGLEVEL=8
+## At a maximum only compile in this level of debugging
+default  CONFIG_MAXIMUM_CONSOLE_LOGLEVEL=8
+
+##
+## Select power on after power fail setting
+default CONFIG_MAINBOARD_POWER_ON_AFTER_POWER_FAIL="MAINBOARD_POWER_ON"
+
+default CONFIG_VIDEO_MB=1
+default CONFIG_GFXUMA=1
+default CONFIG_HAVE_MAINBOARD_RESOURCES=1
+
+### End Options.lb
+end
Index: src/mainboard/technexion/tim5690/acpi_tables.c
===================================================================
--- src/mainboard/technexion/tim5690/acpi_tables.c	(revision 0)
+++ src/mainboard/technexion/tim5690/acpi_tables.c	(revision 0)
@@ -0,0 +1,291 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2008 Advanced Micro Devices, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301 USA
+ */
+
+#include <console/console.h>
+#include <string.h>
+#include <arch/acpi.h>
+#include <device/pci.h>
+#include <device/pci_ids.h>
+#include <cpu/x86/msr.h>
+#include <cpu/amd/mtrr.h>
+#include <cpu/amd/amdk8_sysconf.h>
+#include <../../../northbridge/amd/amdk8/amdk8_acpi.h>
+#include <arch/cpu.h>
+#include <cpu/amd/model_fxx_powernow.h>
+
+extern u16 pm_base;
+
+#define DUMP_ACPI_TABLES 0
+
+/*
+* Assume the max pstate number is 8
+* 0x21(33 bytes) is one package length of _PSS package
+*/
+
+#define Maxpstate 8
+#define Defpkglength 0x21
+
+#if DUMP_ACPI_TABLES == 1
+static void dump_mem(u32 start, u32 end)
+{
+
+	u32 i;
+	print_debug("dump_mem:");
+	for (i = start; i < end; i++) {
+		if ((i & 0xf) == 0) {
+			printk_debug("\n%08x:", i);
+		}
+		printk_debug(" %02x", (u8)*((u8 *)i));
+	}
+	print_debug("\n");
+}
+#endif
+
+extern u8 AmlCode[];
+
+#if CONFIG_ACPI_SSDTX_NUM >= 1
+extern u8 AmlCode_ssdt2[];
+extern u8 AmlCode_ssdt3[];
+extern u8 AmlCode_ssdt4[];
+extern u8 AmlCode_ssdt5[];
+#endif
+
+#define IO_APIC_ADDR	0xfec00000UL
+
+unsigned long acpi_fill_mcfg(unsigned long current)
+{
+	/* Just a dummy */
+	return current;
+}
+
+unsigned long acpi_fill_madt(unsigned long current)
+{
+	/* create all subtables for processors */
+	current = acpi_create_madt_lapics(current);
+
+	/* Write SB600 IOAPIC, only one */
+	current += acpi_create_madt_ioapic((acpi_madt_ioapic_t *) current, 2,
+					   IO_APIC_ADDR, 0);
+
+	current += acpi_create_madt_irqoverride((acpi_madt_irqoverride_t *)
+						current, 0, 0, 2, 0);
+	current += acpi_create_madt_irqoverride((acpi_madt_irqoverride_t *)
+						current, 0, 9, 9, 0xF);
+	/* 0: mean bus 0--->ISA */
+	/* 0: PIC 0 */
+	/* 2: APIC 2 */
+	/* 5 mean: 0101 --> Edige-triggered, Active high */
+
+	/* create all subtables for processors */
+	/* current = acpi_create_madt_lapic_nmis(current, 5, 1); */
+	/* 1: LINT1 connect to NMI */
+
+	return current;
+}
+
+extern void get_bus_conf(void);
+
+void update_ssdtx(void *ssdtx, int i)
+{
+	uint8_t *PCI;
+	uint8_t *HCIN;
+	uint8_t *UID;
+
+	PCI = ssdtx + 0x32;
+	HCIN = ssdtx + 0x39;
+	UID = ssdtx + 0x40;
+
+	if (i < 7) {
+		*PCI = (uint8_t) ('4' + i - 1);
+	} else {
+		*PCI = (uint8_t) ('A' + i - 1 - 6);
+	}
+	*HCIN = (uint8_t) i;
+	*UID = (uint8_t) (i + 3);
+
+	/* FIXME: need to update the GSI id in the ssdtx too */
+
+}
+
+unsigned long acpi_fill_ssdt_generator(unsigned long current, const char *oem_table_id) {
+	k8acpi_write_vars();
+	amd_model_fxx_generate_powernow(pm_base + 8, 6, 1);
+	return (unsigned long) (acpigen_get_current());
+}
+
+unsigned long write_acpi_tables(unsigned long start)
+{
+	unsigned long current;
+	acpi_rsdp_t *rsdp;
+	acpi_rsdt_t *rsdt;
+	acpi_hpet_t *hpet;
+	acpi_madt_t *madt;
+	acpi_fadt_t *fadt;
+	acpi_facs_t *facs;
+	acpi_header_t *dsdt;
+	acpi_header_t *ssdt;
+
+	get_bus_conf();		/* it will get sblk, pci1234, hcdn, and sbdn */
+
+	/* Align ACPI tables to 16byte */
+	start = (start + 0x0f) & -0x10;
+	current = start;
+
+	printk_info("ACPI: Writing ACPI tables at %lx...\n", start);
+
+	/* We need at least an RSDP and an RSDT Table */
+	rsdp = (acpi_rsdp_t *) current;
+	current += sizeof(acpi_rsdp_t);
+	rsdt = (acpi_rsdt_t *) current;
+	current += sizeof(acpi_rsdt_t);
+
+	/* clear all table memory */
+	memset((void *)start, 0, current - start);
+
+	acpi_write_rsdp(rsdp, rsdt, NULL);
+	acpi_write_rsdt(rsdt);
+
+	/*
+	 * We explicitly add these tables later on:
+	 */
+	/* If we want to use HPET Timers Linux wants an MADT */
+	printk_debug("ACPI:    * HPET\n");
+	hpet = (acpi_hpet_t *) current;
+	current += sizeof(acpi_hpet_t);
+	acpi_create_hpet(hpet);
+	acpi_add_table(rsdp, hpet);
+
+	printk_debug("ACPI:    * MADT\n");
+	madt = (acpi_madt_t *) current;
+	acpi_create_madt(madt);
+	current += madt->header.length;
+	acpi_add_table(rsdp, madt);
+
+#if 0
+	/* SRAT */
+	printk_debug("ACPI:    * SRAT\n");
+	srat = (acpi_srat_t *) current;
+	acpi_create_srat(srat);
+	current += srat->header.length;
+	acpi_add_table(rsdp, srat);
+
+	/* SLIT */
+	printk_debug("ACPI:    * SLIT\n");
+	slit = (acpi_slit_t *) current;
+	acpi_create_slit(slit);
+	current += slit->header.length;
+	acpi_add_table(rsdp, slit);
+#endif
+
+	/* SSDT */
+	printk_debug("ACPI:    * SSDT\n");
+	ssdt = (acpi_header_t *)current;
+
+	acpi_create_ssdt_generator(ssdt, "DYNADATA");
+	current += ssdt->length;
+	acpi_add_table(rsdp, ssdt);
+
+#if CONFIG_ACPI_SSDTX_NUM >= 1
+
+	/* same htio, but different position? We may have to copy, change HCIN, and recalculate the checknum and add_table */
+
+	for (i = 1; i < sysconf.hc_possible_num; i++) {	/* 0: is hc sblink */
+		if ((sysconf.pci1234[i] & 1) != 1)
+			continue;
+		uint8_t c;
+		if (i < 7) {
+			c = (uint8_t) ('4' + i - 1);
+		} else {
+			c = (uint8_t) ('A' + i - 1 - 6);
+		}
+		printk_debug("ACPI:    * SSDT for PCI%c Aka hcid = %d\n", c, sysconf.hcid[i]);	/* pci0 and pci1 are in dsdt */
+		current = (current + 0x07) & -0x08;
+		ssdtx = (acpi_header_t *) current;
+		switch (sysconf.hcid[i]) {
+		case 1:	/* 8132 */
+			p = AmlCode_ssdt2;
+			break;
+		case 2:	/* 8151 */
+			p = AmlCode_ssdt3;
+			break;
+		case 3:	/* 8131 */
+			p = AmlCode_ssdt4;
+			break;
+		default:
+			/* HTX no io apic */
+			p = AmlCode_ssdt5;
+			break;
+		}
+		current += ((acpi_header_t *) p)->length;
+		memcpy((void *)ssdtx, (void *)p, ((acpi_header_t *) p)->length);
+		update_ssdtx((void *)ssdtx, i);
+		ssdtx->checksum = 0;
+		ssdtx->checksum =
+		    acpi_checksum((u8 *)ssdtx, ssdtx->length);
+		acpi_add_table(rsdp, ssdtx);
+	}
+#endif
+
+	/* FACS */
+	printk_debug("ACPI:    * FACS\n");
+	facs = (acpi_facs_t *) current;
+	current += sizeof(acpi_facs_t);
+	acpi_create_facs(facs);
+
+	/* DSDT */
+	printk_debug("ACPI:    * DSDT\n");
+	dsdt = (acpi_header_t *) current;
+	memcpy((void *)dsdt, (void *)AmlCode,
+	       ((acpi_header_t *) AmlCode)->length);
+	current += dsdt->length;
+	printk_debug("ACPI:    * DSDT @ %p Length %x\n", dsdt, dsdt->length);
+	/* FADT */
+	printk_debug("ACPI:    * FADT\n");
+	fadt = (acpi_fadt_t *) current;
+	current += sizeof(acpi_fadt_t);
+
+	acpi_create_fadt(fadt, facs, dsdt);
+	acpi_add_table(rsdp, fadt);
+
+#if DUMP_ACPI_TABLES == 1
+	printk_debug("rsdp\n");
+	dump_mem(rsdp, ((void *)rsdp) + sizeof(acpi_rsdp_t));
+
+	printk_debug("rsdt\n");
+	dump_mem(rsdt, ((void *)rsdt) + sizeof(acpi_rsdt_t));
+
+	printk_debug("madt\n");
+	dump_mem(madt, ((void *)madt) + madt->header.length);
+
+	printk_debug("srat\n");
+	dump_mem(srat, ((void *)srat) + srat->header.length);
+
+	printk_debug("slit\n");
+	dump_mem(slit, ((void *)slit) + slit->header.length);
+
+	printk_debug("ssdt\n");
+	dump_mem(ssdt, ((void *)ssdt) + ssdt->length);
+
+	printk_debug("fadt\n");
+	dump_mem(fadt, ((void *)fadt) + fadt->header.length);
+#endif
+
+	printk_info("ACPI: done.\n");
+	return current;
+}
Index: src/mainboard/technexion/tim5690/chip.h
===================================================================
--- src/mainboard/technexion/tim5690/chip.h	(revision 0)
+++ src/mainboard/technexion/tim5690/chip.h	(revision 0)
@@ -0,0 +1,26 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2008 Advanced Micro Devices, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301 USA
+ */
+
+extern struct chip_operations mainboard_ops;
+
+struct mainboard_config
+{
+	u32 uma_size;			/* How many UMA should be used in memory for TOP. */
+};
+
Index: src/mainboard/technexion/tim5690/acpi/globutil.asl
===================================================================
--- src/mainboard/technexion/tim5690/acpi/globutil.asl	(revision 0)
+++ src/mainboard/technexion/tim5690/acpi/globutil.asl	(revision 0)
@@ -0,0 +1,118 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2008 Advanced Micro Devices, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301 USA
+ */
+
+/*
+Scope(\_SB) {
+	Include ("globutil.asl")
+}
+*/
+
+/* string compare functions */
+Method(MIN, 2)
+{
+	if (LLess(Arg0, Arg1)) {
+		Return(Arg0)
+	} else {
+		Return(Arg1)
+	}
+}
+
+Method(SLEN, 1)
+{
+	Store(Arg0, Local0)
+	Return(Sizeof(Local0))
+}
+
+Method(S2BF, 1)
+{
+	Add(SLEN(Arg0), One, Local0)
+	Name(BUFF, Buffer(Local0) {})
+	Store(Arg0, BUFF)
+	Return(BUFF)
+}
+
+/* Strong string compare.  Checks both length and content */
+Method(SCMP, 2)
+{
+	Store(S2BF(Arg0), Local0)
+	Store(S2BF(Arg1), Local1)
+	Store(Zero, Local4)
+	Store(SLEN(Arg0), Local5)
+	Store(SLEN(Arg1), Local6)
+	Store(MIN(Local5, Local6), Local7)
+
+	While(LLess(Local4, Local7)) {
+		Store(Derefof(Index(Local0, Local4)), Local2)
+		Store(Derefof(Index(Local1, Local4)), Local3)
+		if (LGreater(Local2, Local3)) {
+			Return(One)
+		} else {
+			if (LLess(Local2, Local3)) {
+				Return(Ones)
+			}
+		}
+		Increment(Local4)
+	}
+	if (LLess(Local4, Local5)) {
+		Return(One)
+	} else {
+		if (LLess(Local4, Local6)) {
+			Return(Ones)
+		} else {
+			Return(Zero)
+		}
+	}
+}
+
+/* Weak string compare.  Checks to find Arg1 at beginning of Arg0.
+* Fails if length(Arg0) < length(Arg1).  Returns 0 on Fail, 1 on
+* Pass.
+*/
+Method(WCMP, 2)
+{
+	Store(S2BF(Arg0), Local0)
+	Store(S2BF(Arg1), Local1)
+	if (LLess(SLEN(Arg0), SLEN(Arg1))) {
+		Return(0)
+	}
+	Store(Zero, Local2)
+	Store(SLEN(Arg1), Local3)
+
+	While(LLess(Local2, Local3)) {
+		if (LNotEqual(Derefof(Index(Local0, Local2)),
+			Derefof(Index(Local1, Local2)))) {
+			Return(0)
+		}
+		Increment(Local2)
+	}
+	Return(One)
+}
+
+/* ARG0 = IRQ Number(0-15)
+* Returns Bit Map
+*/
+Method(I2BM, 1)
+{
+	Store(0, Local0)
+	if (LNotEqual(ARG0, 0)) {
+		Store(1, Local1)
+		ShiftLeft(Local1, ARG0, Local0)
+	}
+	Return(Local0)
+}
Index: src/mainboard/technexion/tim5690/acpi/ide.asl
===================================================================
--- src/mainboard/technexion/tim5690/acpi/ide.asl	(revision 0)
+++ src/mainboard/technexion/tim5690/acpi/ide.asl	(revision 0)
@@ -0,0 +1,244 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2008 Advanced Micro Devices, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301 USA
+ */
+
+/*
+Scope (_SB) {
+	Device(PCI0) {
+		Device(IDEC) {
+			Name(_ADR, 0x00140001)
+			Include ("ide.asl")
+		}
+	}
+}
+*/
+
+/* Some timing tables */
+Name(UDTT, Package(){ /* Udma timing table */
+	120, 90, 60, 45, 30, 20, 15, 0	/* UDMA modes 0 -> 6 */
+})
+
+Name(MDTT, Package(){ /* MWDma timing table */
+	480, 150, 120, 0	/* Legacy DMA modes 0 -> 2 */
+})
+
+Name(POTT, Package(){ /* Pio timing table */
+	600, 390, 270, 180, 120, 0	/* PIO modes 0 -> 4 */
+})
+
+/* Some timing register value tables */
+Name(MDRT, Package(){ /* MWDma timing register table */
+	0x77, 0x21, 0x20, 0xFF	/* Legacy DMA modes 0 -> 2 */
+})
+
+Name(PORT, Package(){
+	0x99, 0x47, 0x34, 0x22, 0x20, 0x99	/* PIO modes 0 -> 4 */
+})
+
+OperationRegion(ICRG, PCI_Config, 0x40, 0x20) /* ide control registers */
+	Field(ICRG, AnyAcc, NoLock, Preserve)
+{
+	PPTS, 8,	/* Primary PIO Slave Timing */
+	PPTM, 8,	/* Primary PIO Master Timing */
+	OFFSET(0x04), PMTS, 8,	/* Primary MWDMA Slave Timing */
+	PMTM, 8,	/* Primary MWDMA Master Timing */
+	OFFSET(0x08), PPCR, 8,	/* Primary PIO Control */
+	OFFSET(0x0A), PPMM, 4,	/* Primary PIO master Mode */
+	PPSM, 4,	/* Primary PIO slave Mode */
+	OFFSET(0x14), PDCR, 2,	/* Primary UDMA Control */
+	OFFSET(0x16), PDMM, 4,	/* Primary UltraDMA Mode */
+	PDSM, 4,	/* Primary UltraDMA Mode */
+}
+
+Method(GTTM, 1) /* get total time*/
+{
+	Store(And(Arg0, 0x0F), Local0)	/* Recovery Width */
+	Increment(Local0)
+	Store(ShiftRight(Arg0, 4), Local1)	/* Command Width */
+	Increment(Local1)
+	Return(Multiply(30, Add(Local0, Local1)))
+}
+
+Device(PRID)
+{
+	Name (_ADR, Zero)
+	Method(_GTM, 0)
+	{
+		NAME(OTBF, Buffer(20) { /* out buffer */
+			0xFF, 0xFF, 0xFF, 0xFF,
+			0xFF, 0xFF, 0xFF, 0xFF,
+			0xFF, 0xFF, 0xFF, 0xFF,
+			0xFF, 0xFF, 0xFF, 0xFF, 0x00, 0x00, 0x00, 0x00
+		})
+
+		CreateDwordField(OTBF, 0, PSD0)   /* PIO spd0 */
+		CreateDwordField(OTBF, 4, DSD0)   /* DMA spd0 */
+		CreateDwordField(OTBF, 8, PSD1)   /* PIO spd1 */
+		CreateDwordField(OTBF, 12, DSD1) /* DMA spd1 */
+		CreateDwordField(OTBF, 16, BFFG) /* buffer flags */
+
+		/* Just return if the channel is disabled */
+		If(And(PPCR, 0x01)) { /* primary PIO control */
+			Return(OTBF)
+		}
+
+		/* Always tell them independent timing available and IOChannelReady used on both drives */
+		Or(BFFG, 0x1A, BFFG)
+
+		Store(GTTM(PPTM), PSD0) /* save total time of primary PIO master timming  to PIO spd0 */
+		Store(GTTM(PPTS), PSD1) /* save total time of primary PIO slave Timing  to PIO spd1 */
+
+		If(And(PDCR, 0x01)) {	/* It's under UDMA mode */
+			Or(BFFG, 0x01, BFFG)
+			Store(DerefOf(Index(UDTT, PDMM)), DSD0)
+		}
+		Else {
+			Store(GTTM(PMTM), DSD0) /* Primary MWDMA Master Timing,  DmaSpd0 */
+		}
+
+		If(And(PDCR, 0x02)) {	/* It's under UDMA mode */
+			Or(BFFG, 0x04, BFFG)
+			Store(DerefOf(Index(UDTT, PDSM)), DSD1)
+		}
+		Else {
+			Store(GTTM(PMTS), DSD1) /* Primary MWDMA Slave Timing,  DmaSpd0 */
+		}
+
+		Return(OTBF) /* out buffer */
+	}				/* End Method(_GTM) */
+
+	Method(_STM, 3, NotSerialized)
+	{
+		NAME(INBF, Buffer(20) { /* in buffer */
+			0xFF, 0xFF, 0xFF, 0xFF,
+			0xFF, 0xFF, 0xFF, 0xFF,
+			0xFF, 0xFF, 0xFF, 0xFF,
+			0xFF, 0xFF, 0xFF, 0xFF, 0x00, 0x00, 0x00, 0x00
+		})
+
+		CreateDwordField(INBF, 0, PSD0)    /* PIO spd0 */
+		CreateDwordField(INBF, 4, DSD0)   /* PIO spd0 */
+		CreateDwordField(INBF, 8, PSD1)   /* PIO spd1 */
+		CreateDwordField(INBF, 12, DSD1) /* DMA spd1 */
+		CreateDwordField(INBF, 16, BFFG) /*buffer flag */
+
+		Store(Match(POTT, MLE, PSD0, MTR, 0, 0), Local0)
+		Divide(Local0, 5, PPMM,) /* Primary PIO master Mode */
+		Store(Match(POTT, MLE, PSD1, MTR, 0, 0), Local1)
+		Divide(Local1, 5, PPSM,) /* Primary PIO slave Mode */
+
+		Store(DerefOf(Index(PORT, Local0)), PPTM) /* Primary PIO Master Timing */
+		Store(DerefOf(Index(PORT, Local1)), PPTS) /* Primary PIO Slave Timing */
+
+		If(And(BFFG, 0x01)) {	/* Drive 0 is under UDMA mode */
+			Store(Match(UDTT, MLE, DSD0, MTR, 0, 0), Local0)
+			Divide(Local0, 7, PDMM,)
+			Or(PDCR, 0x01, PDCR)
+		}
+		Else {
+			If(LNotEqual(DSD0, 0xFFFFFFFF)) {
+				Store(Match(MDTT, MLE, DSD0, MTR, 0, 0), Local0)
+				Store(DerefOf(Index(MDRT, Local0)), PMTM)
+			}
+		}
+
+		If(And(BFFG, 0x04)) {	/* Drive 1 is under UDMA mode */
+			Store(Match(UDTT, MLE, DSD1, MTR, 0, 0), Local0)
+			Divide(Local0, 7, PDSM,)
+			Or(PDCR, 0x02, PDCR)
+		}
+		Else {
+			If(LNotEqual(DSD1, 0xFFFFFFFF)) {
+				Store(Match(MDTT, MLE, DSD1, MTR, 0, 0), Local0)
+				Store(DerefOf(Index(MDRT, Local0)), PMTS)
+			}
+		}
+		/* Return(INBF) */
+	}		/*End Method(_STM) */
+	Device(MST)
+	{
+		Name(_ADR, 0)
+		Method(_GTF) {
+			Name(CMBF, Buffer(21) {
+				0x03, 0x00, 0x00, 0x00, 0x00, 0xFF, 0xEF,
+				0x03, 0x00, 0x00, 0x00, 0x00, 0xFF, 0xEF,
+				0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xF5
+			})
+			CreateByteField(CMBF, 1, POMD)
+			CreateByteField(CMBF, 8, DMMD)
+			CreateByteField(CMBF, 5, CMDA)
+			CreateByteField(CMBF, 12, CMDB)
+			CreateByteField(CMBF, 19, CMDC)
+
+			Store(0xA0, CMDA)
+			Store(0xA0, CMDB)
+			Store(0xA0, CMDC)
+
+			Or(PPMM, 0x08, POMD)
+
+			If(And(PDCR, 0x01)) {
+				Or(PDMM, 0x40, DMMD)
+			}
+			Else {
+				Store(Match
+				      (MDTT, MLE, GTTM(PMTM),
+				       MTR, 0, 0), Local0)
+				If(LLess(Local0, 3)) {
+					Or(0x20, Local0, DMMD)
+				}
+			}
+			Return(CMBF)
+		}
+	}		/* End Device(MST) */
+
+	Device(SLAV)
+	{
+		Name(_ADR, 1)
+		Method(_GTF) {
+			Name(CMBF, Buffer(21) {
+				0x03, 0x00, 0x00, 0x00, 0x00, 0xFF, 0xEF,
+				0x03, 0x00, 0x00, 0x00, 0x00, 0xFF, 0xEF,
+				0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xF5
+			})
+			CreateByteField(CMBF, 1, POMD)
+			CreateByteField(CMBF, 8, DMMD)
+			CreateByteField(CMBF, 5, CMDA)
+			CreateByteField(CMBF, 12, CMDB)
+			CreateByteField(CMBF, 19, CMDC)
+
+			Store(0xB0, CMDA)
+			Store(0xB0, CMDB)
+			Store(0xB0, CMDC)
+
+			Or(PPSM, 0x08, POMD)
+
+			If(And(PDCR, 0x02)) {
+				Or(PDSM, 0x40, DMMD)
+			}
+			Else {
+				Store(Match
+				      (MDTT, MLE, GTTM(PMTS),
+				       MTR, 0, 0), Local0)
+				If(LLess(Local0, 3)) {
+					Or(0x20, Local0, DMMD)
+				}
+			}
+			Return(CMBF)
+		}
+	}			/* End Device(SLAV) */
+}
Index: src/mainboard/technexion/tim5690/acpi/debug.asl
===================================================================
--- src/mainboard/technexion/tim5690/acpi/debug.asl	(revision 0)
+++ src/mainboard/technexion/tim5690/acpi/debug.asl	(revision 0)
@@ -0,0 +1,198 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2008 Advanced Micro Devices, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301 USA
+ */
+
+/*
+	DefinitionBlock (
+		"DSDT.AML",
+		"DSDT",
+		0x01,
+		"XXXXXX",
+		"XXXXXXXX",
+		0x00010001
+		)
+	{
+		Include ("debug.asl")
+	}
+*/
+
+/*
+* 0x80: POST_BASE
+* 0x3F8: DEBCOM_BASE
+* X80: POST_REGION
+* P80: PORT80
+*
+* CREG: DEBCOM_REGION
+* CUAR: DEBCOM_UART
+* CDAT: DEBCOM_DATA
+* CDLM: DEBCOM_DLM
+* DLCR: DEBCOM_LCR
+* CMCR: DEBCOM_MCR
+* CLSR: DEBCOM_LSR
+*
+* DEBUG_INIT	DINI
+*/
+
+OperationRegion(X80, SystemIO, 0x80, 1)
+	Field(X80, ByteAcc, NoLock, Preserve)
+{
+	P80, 8
+}
+
+OperationRegion(CREG, SystemIO, 0x3F8, 8)
+	Field(CREG, ByteAcc, NoLock, Preserve)
+{
+	CDAT, 8,
+	CDLM, 8,, 8, DLCR, 8, CMCR, 8, CLSR, 8
+}
+
+/*
+* DINI
+* Initialize the COM port to 115,200 8-N-1
+*/
+Method(DINI)
+{
+	store(0x83, DLCR)
+	store(0x01, CDAT)	/* 115200 baud (low) */
+	store(0x00, CDLM)	/* 115200 baud (high) */
+	store(0x03, DLCR)	/* word=8 stop=1 parity=none */
+	store(0x03, CMCR)	/* DTR=1 RTS=1 Out2=Off Loop=Off */
+	store(0x00, CDLM)	/* turn off interrupts */
+}
+
+/*
+* THRE
+* Wait for COM port transmitter holding register to go empty
+*/
+Method(THRE)
+{
+	and(CLSR, 0x20, local0)
+	while (Lequal(local0, Zero)) {
+		and(CLSR, 0x20, local0)
+	}
+}
+
+/*
+* OUTX
+* Send a single raw character
+*/
+Method(OUTX, 1)
+{
+	THRE()
+	store(Arg0, CDAT)
+}
+
+/*
+* OUTC
+* Send a single character, expanding LF into CR/LF
+*/
+Method(OUTC, 1)
+{
+	if (LEqual(Arg0, 0x0a)) {
+		OUTX(0x0d)
+	}
+	OUTX(Arg0)
+}
+
+/*
+* DBGN
+* Send a single hex nibble
+*/
+Method(DBGN, 1)
+{
+	and(Arg0, 0x0f, Local0)
+	if (LLess(Local0, 10)) {
+		add(Local0, 0x30, Local0)
+	} else {
+		add(Local0, 0x37, Local0)
+	}
+	OUTC(Local0)
+}
+
+/*
+* DBGB
+* Send a hex byte
+*/
+Method(DBGB, 1)
+{
+	ShiftRight(Arg0, 4, Local0)
+	DBGN(Local0)
+	DBGN(Arg0)
+}
+
+/*
+* DBGW
+* Send a hex word
+*/
+Method(DBGW, 1)
+{
+	ShiftRight(Arg0, 8, Local0)
+	DBGB(Local0)
+	DBGB(Arg0)
+}
+
+/*
+* DBGD
+* Send a hex Dword
+*/
+Method(DBGD, 1)
+{
+	ShiftRight(Arg0, 16, Local0)
+	DBGW(Local0)
+	DBGW(Arg0)
+}
+
+/*
+* DBGO
+* Send either a string or an integer
+*/
+Method(DBGO, 1)
+{
+	/* DINI() */
+	if (LEqual(ObjectType(Arg0), 1)) {
+		if (LGreater(Arg0, 0xffff)) {
+			DBGD(Arg0)
+		} else {
+			if (LGreater(Arg0, 0xff)) {
+				DBGW(Arg0)
+			} else {
+				DBGB(Arg0)
+			}
+		}
+	} else {
+		Name(BDBG, Buffer(80) {})
+		store(Arg0, BDBG)
+		store(0, Local1)
+		while (One) {
+			store(GETC(BDBG, Local1), Local0)
+			if (LEqual(Local0, 0)) {
+				return (0)
+			}
+			OUTC(Local0)
+			Increment(Local1)
+		}
+	}
+	return (0)
+}
+
+/* Get a char from a string */
+Method(GETC, 2)
+{
+	CreateByteField(Arg0, Arg1, DBGC)
+	return (DBGC)
+}
Index: src/mainboard/technexion/tim5690/acpi/routing.asl
===================================================================
--- src/mainboard/technexion/tim5690/acpi/routing.asl	(revision 0)
+++ src/mainboard/technexion/tim5690/acpi/routing.asl	(revision 0)
@@ -0,0 +1,258 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2008 Advanced Micro Devices, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301 USA
+ */
+
+/*
+DefinitionBlock ("DSDT.AML","DSDT",0x01,"XXXXXX","XXXXXXXX",0x00010001
+		)
+	{
+		Include ("routing.asl")
+	}
+*/
+
+/* Routing is in System Bus scope */
+Scope(\_SB) {
+	Name(PR0, Package(){
+		/* NB devices */
+		/* Bus 0, Dev 0 - RS690 Host Controller */
+		/* Bus 0, Dev 1 - PCI Bridge for Internal Graphics */
+		/* Bus 0, Dev 2 - PCIe Bridge for x8 PCIe Slot (GFX0) */
+		Package(){0x0002FFFF, 0, INTC, 0 },
+		Package(){0x0002FFFF, 1, INTD, 0 },
+		Package(){0x0002FFFF, 2, INTA, 0 },
+		Package(){0x0002FFFF, 3, INTB, 0 },
+		/* Bus 0, Dev 3 - PCIe graphics port 1 bridge */
+		/* Bus 0, Dev 4 - PCIe Bridge for Express Card Slot */
+		Package(){0x0004FFFF, 0, INTA, 0 },
+		Package(){0x0004FFFF, 1, INTB, 0 },
+		Package(){0x0004FFFF, 2, INTC, 0 },
+		Package(){0x0004FFFF, 3, INTD, 0 },
+		/* Bus 0, Dev 5 - General purpose PCIe bridge 5 */
+		/* Package(){0x0005FFFF, 0, INTB, 0 }, */
+		/* Package(){0x0005FFFF, 1, INTC, 0 }, */
+		/* Package(){0x0005FFFF, 2, INTD, 0 }, */
+		/* Package(){0x0005FFFF, 3, INTA, 0 }, */
+		/* Bus 0, Dev 6 - PCIe Bridge for Ethernet Chip */
+		Package(){0x0006FFFF, 0, INTC, 0 },
+		Package(){0x0006FFFF, 1, INTD, 0 },
+		Package(){0x0006FFFF, 2, INTA, 0 },
+		Package(){0x0006FFFF, 3, INTB, 0 },
+		/* Bus 0, Dev 7 - PCIe Bridge for x1 PCIe Slot */
+		Package(){0x0007FFFF, 0, INTD, 0 },
+		Package(){0x0007FFFF, 1, INTA, 0 },
+		Package(){0x0007FFFF, 2, INTB, 0 },
+		Package(){0x0007FFFF, 3, INTC, 0 },
+		/* Bus 0, Funct 8 - Southbridge port (normally hidden) */
+
+		/* SB devices */
+		/* Bus 0, Dev 17 - SATA controller #2 */
+		/* Bus 0, Dev 18 - SATA controller #1 */
+		Package(){0x0012FFFF, 1, INTA, 0 },
+
+		/* Bus 0, Dev 19 - USB: OHCI, funct 0-4; EHCI, funct 5 */
+		Package(){0x0013FFFF, 0, INTA, 0 },
+		Package(){0x0013FFFF, 1, INTB, 0 },
+		Package(){0x0013FFFF, 2, INTC, 0 },
+		Package(){0x0013FFFF, 3, INTD, 0 },
+
+		/* Bus 0, Dev 20 - F0:SMBus/ACPI,F1:IDE;F2:HDAudio;F3:LPC;F4:PCIBridge;F5:AC97 Audio;F6:AC97 Modem */
+		Package(){0x0014FFFF, 0, INTA, 0 },
+		Package(){0x0014FFFF, 1, INTB, 0 },
+		Package(){0x0014FFFF, 2, INTC, 0 },
+		Package(){0x0014FFFF, 3, INTD, 0 },
+	})
+
+	Name(APR0, Package(){
+		/* NB devices in APIC mode */
+		/* Bus 0, Dev 0 - RS690 Host Controller */
+
+		/* Bus 0, Dev 1 - PCI Bridge for Internal Graphics */
+		/* Package(){0x0001FFFF, 0, 0, 18 }, */
+		/* package(){0x0001FFFF, 1, 0, 19 }, */
+
+		/* Bus 0, Dev 2 - PCIe Bridge for x8 PCIe Slot (GFX0) */
+		Package(){0x0002FFFF, 0, 0, 18 },
+		/* Package(){0x0002FFFF, 1, 0, 19 }, */
+		/* Package(){0x0002FFFF, 2, 0, 16 }, */
+		/* Package(){0x0002FFFF, 3, 0, 17 }, */
+
+		/* Bus 0, Dev 3 - PCIe graphics port 1 bridge */
+		Package(){0x0003FFFF, 0, 0, 19 },
+
+		/* Bus 0, Dev 4 - PCIe Bridge for Express Card Slot */
+		Package(){0x0004FFFF, 0, 0, 16 },
+		/* Package(){0x0004FFFF, 1, 0, 17 }, */
+		/* Package(){0x0004FFFF, 2, 0, 18 }, */
+		/* Package(){0x0004FFFF, 3, 0, 19 }, */
+
+		/* Bus 0, Dev 5 - General purpose PCIe bridge 5 */
+		Package(){0x0005FFFF, 0, 0, 17 },
+		/* Package(){0x0005FFFF, 1, 0, 18 }, */
+		/* Package(){0x0005FFFF, 2, 0, 19 }, */
+		/* Package(){0x0005FFFF, 3, 0, 16 }, */
+
+		/* Bus 0, Dev 6 - General purpose PCIe bridge 6 */
+		Package(){0x0006FFFF, 0, 0, 18 },
+		/* Package(){0x0006FFFF, 1, 0, 19 }, */
+		/* Package(){0x0006FFFF, 2, 0, 16 }, */
+		/* Package(){0x0006FFFF, 3, 0, 17 }, */
+
+		/* Bus 0, Dev 7 - PCIe Bridge for network card */
+		Package(){0x0007FFFF, 0, 0, 19 },
+		/* Package(){0x0007FFFF, 1, 0, 16 }, */
+		/* Package(){0x0007FFFF, 2, 0, 17 }, */
+		/* Package(){0x0007FFFF, 3, 0, 18 }, */
+
+		/* Bus 0, Funct 8 - Southbridge port (normally hidden) */
+
+		/* SB devices in APIC mode */
+		/* Bus 0, Dev 17 - SATA controller #2 */
+		/* Bus 0, Dev 18 - SATA controller #1 */
+		Package(){0x0012FFFF, 0, 0, 22 },
+
+		/* Bus 0, Dev 19 - USB: OHCI, funct 0-4; EHCI, funct 5 */
+		Package(){0x0013FFFF, 0, 0, 16 },
+		Package(){0x0013FFFF, 1, 0, 17 },
+		Package(){0x0013FFFF, 2, 0, 18 },
+		Package(){0x0013FFFF, 3, 0, 19 },
+		/* Package(){0x00130004, 2, 0, 18 }, */
+		/* Package(){0x00130005, 3, 0, 19 }, */
+
+		/* Bus 0, Dev 20 - F0:SMBus/ACPI, F1:IDE; F2:HDAudio; F3:LPC; F4:PCIBridge; F5:AC97 Audio; F6:AC97 Modem */
+		Package(){0x0014FFFF, 0, 0, 16 },
+		Package(){0x0014FFFF, 1, 0, 17 },
+		Package(){0x0014FFFF, 2, 0, 18 },
+		Package(){0x0014FFFF, 3, 0, 19 },
+		/* Package(){0x00140004, 2, 0, 18 }, */
+		/* Package(){0x00140004, 3, 0, 19 }, */
+		/* Package(){0x00140005, 1, 0, 17 }, */
+		/* Package(){0x00140006, 1, 0, 17 }, */
+	})
+
+	Name(PR1, Package(){
+		/* Internal graphics - RS690 VGA, Bus1, Dev5 */
+		Package(){0x0005FFFF, 0, INTA, 0 },
+		Package(){0x0005FFFF, 1, INTB, 0 },
+		Package(){0x0005FFFF, 2, INTC, 0 },
+		Package(){0x0005FFFF, 3, INTD, 0 },
+	})
+
+	Name(APR1, Package(){
+		/* Internal graphics - RS690 VGA, Bus1, Dev5 */
+		Package(){0x0005FFFF, 0, 0, 18 },
+		Package(){0x0005FFFF, 1, 0, 19 },
+		/* Package(){0x0005FFFF, 2, 0, 20 }, */
+		/* Package(){0x0005FFFF, 3, 0, 17 }, */
+	})
+
+	Name(PS2, Package(){
+		/* The external GFX - Hooked to PCIe slot 2 */
+		Package(){0x0000FFFF, 0, INTC, 0 },
+		Package(){0x0000FFFF, 1, INTD, 0 },
+		Package(){0x0000FFFF, 2, INTA, 0 },
+		Package(){0x0000FFFF, 3, INTB, 0 },
+	})
+
+	Name(APS2, Package(){
+		/* The external GFX - Hooked to PCIe slot 2 */
+		Package(){0x0000FFFF, 0, 0, 18 },
+		Package(){0x0000FFFF, 1, 0, 19 },
+		Package(){0x0000FFFF, 2, 0, 16 },
+		Package(){0x0000FFFF, 3, 0, 17 },
+	})
+
+	Name(PS4, Package(){
+		/* PCIe slot - Hooked to PCIe slot 4 */
+		Package(){0x0000FFFF, 0, INTA, 0 },
+		Package(){0x0000FFFF, 1, INTB, 0 },
+		Package(){0x0000FFFF, 2, INTC, 0 },
+		Package(){0x0000FFFF, 3, INTD, 0 },
+	})
+
+	Name(APS4, Package(){
+		/* PCIe slot - Hooked to PCIe slot 4 */
+		Package(){0x0000FFFF, 0, 0, 16 },
+		Package(){0x0000FFFF, 1, 0, 17 },
+		Package(){0x0000FFFF, 2, 0, 18 },
+		Package(){0x0000FFFF, 3, 0, 19 },
+	})
+
+	Name(PS5, Package(){
+		/* PCIe slot - Hooked to PCIe slot 5 */
+		Package(){0x0000FFFF, 0, INTB, 0 },
+		Package(){0x0000FFFF, 1, INTC, 0 },
+		Package(){0x0000FFFF, 2, INTD, 0 },
+		Package(){0x0000FFFF, 3, INTA, 0 },
+	})
+
+	Name(APS5, Package(){
+		/* PCIe slot - Hooked to PCIe slot 5 */
+		Package(){0x0000FFFF, 0, 0, 17 },
+		Package(){0x0000FFFF, 1, 0, 18 },
+		Package(){0x0000FFFF, 2, 0, 19 },
+		Package(){0x0000FFFF, 3, 0, 16 },
+	})
+
+	Name(PS6, Package(){
+		/* PCIe slot - Hooked to PCIe slot 6 */
+		Package(){0x0000FFFF, 0, INTC, 0 },
+		Package(){0x0000FFFF, 1, INTD, 0 },
+		Package(){0x0000FFFF, 2, INTA, 0 },
+		Package(){0x0000FFFF, 3, INTB, 0 },
+	})
+
+	Name(APS6, Package(){
+		/* PCIe slot - Hooked to PCIe slot 6 */
+		Package(){0x0000FFFF, 0, 0, 18 },
+		Package(){0x0000FFFF, 1, 0, 19 },
+		Package(){0x0000FFFF, 2, 0, 16 },
+		Package(){0x0000FFFF, 3, 0, 17 },
+	})
+
+	Name(PS7, Package(){
+		/* The onboard Ethernet chip - Hooked to PCIe slot 7 */
+		Package(){0x0000FFFF, 0, INTD, 0 },
+		Package(){0x0000FFFF, 1, INTA, 0 },
+		Package(){0x0000FFFF, 2, INTB, 0 },
+		Package(){0x0000FFFF, 3, INTC, 0 },
+	})
+
+	Name(APS7, Package(){
+		/* The onboard Ethernet chip - Hooked to PCIe slot 7 */
+		Package(){0x0000FFFF, 0, 0, 19 },
+		Package(){0x0000FFFF, 1, 0, 16 },
+		Package(){0x0000FFFF, 2, 0, 17 },
+		Package(){0x0000FFFF, 3, 0, 18 },
+	})
+
+	Name(PCIB, Package(){
+		/* PCI slots: slot 0, slot 1, slot 2 behind Dev14, Fun4. */
+		Package(){0x0005FFFF, 0, 0, 0x14 },
+		Package(){0x0005FFFF, 1, 0, 0x15 },
+		Package(){0x0005FFFF, 2, 0, 0x16 },
+		Package(){0x0005FFFF, 3, 0, 0x17 },
+		Package(){0x0006FFFF, 0, 0, 0x15 },
+		Package(){0x0006FFFF, 1, 0, 0x16 },
+		Package(){0x0006FFFF, 2, 0, 0x17 },
+		Package(){0x0006FFFF, 3, 0, 0x14 },
+		Package(){0x0007FFFF, 0, 0, 0x16 },
+		Package(){0x0007FFFF, 1, 0, 0x17 },
+		Package(){0x0007FFFF, 2, 0, 0x14 },
+		Package(){0x0007FFFF, 3, 0, 0x15 },
+	})
+}
Index: src/mainboard/technexion/tim5690/acpi/sata.asl
===================================================================
--- src/mainboard/technexion/tim5690/acpi/sata.asl	(revision 0)
+++ src/mainboard/technexion/tim5690/acpi/sata.asl	(revision 0)
@@ -0,0 +1,149 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2008 Advanced Micro Devices, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301 USA
+ */
+
+/* simple name description */
+
+/*
+Scope (_SB) {
+	Device(PCI0) {
+		Device(SATA) {
+			Name(_ADR, 0x00120000)
+			Include ("sata.asl")
+		}
+	}
+}
+*/
+
+Name(STTM, Buffer(20) {
+	0x78, 0x00, 0x00, 0x00, 0x0f, 0x00, 0x00, 0x00,
+	0x78, 0x00, 0x00, 0x00, 0x0f, 0x00, 0x00, 0x00,
+	0x1f, 0x00, 0x00, 0x00
+})
+
+/* Start by clearing the PhyRdyChg bits */
+Method(_INI) {
+	\_GPE._L1F()
+}
+
+Device(PMRY)
+{
+	Name(_ADR, 0)
+	Method(_GTM, 0x0, NotSerialized) {
+		Return(STTM)
+	}
+	Method(_STM, 0x3, NotSerialized) {}
+
+	Device(PMST) {
+		Name(_ADR, 0)
+		Method(_STA,0) {
+			if (LGreater(P0IS,0)) {
+				return (0x0F) /* sata is visible */
+			}
+			else {
+				return  (0x00) /* sata is missing */
+			}
+		}
+	}/* end of PMST */
+
+	Device(PSLA)
+	{
+		Name(_ADR, 1)
+		Method(_STA,0) {
+			if (LGreater(P1IS,0)) {
+				return (0x0F) /* sata is visible */
+			}
+			else {
+				return (0x00) /* sata is missing */
+			}
+		}
+	}	/* end of PSLA */
+}   /* end of PMRY */
+
+
+Device(SEDY)
+{
+	Name(_ADR, 1)		/* IDE Scondary Channel */
+	Method(_GTM, 0x0, NotSerialized) {
+		Return(STTM)
+	}
+	Method(_STM, 0x3, NotSerialized) {}
+
+	Device(SMST)
+	{
+		Name(_ADR, 0)
+		Method(_STA,0) {
+			if (LGreater(P2IS,0)) {
+				return (0x0F) /* sata is visible */
+			}
+			else {
+				return (0x00) /* sata is missing */
+			}
+		}
+	} /* end of SMST */
+
+	Device(SSLA)
+	{
+		Name(_ADR, 1)
+		Method(_STA,0) {
+			if (LGreater(P3IS,0)) {
+				return (0x0F) /* sata is visible */
+			}
+			else {
+				return (0x00) /* sata is missing */
+			}
+		}
+	} /* end of SSLA */
+}   /* end of SEDY */
+
+/* SATA Hot Plug Support */
+Scope(\_GPE) {
+	Method(_L1F,0x0,NotSerialized) {
+		if (\_SB.P0PR) {
+			if (LGreater(\_SB.P0IS,0)) {
+				sleep(32)
+			}
+			Notify(\_SB.PCI0.STCR.PMRY.PMST, 0x01) /* NOTIFY_DEVICE_CHECK */
+			store(one, \_SB.P0PR)
+		}
+
+		if (\_SB.P1PR) {
+			if (LGreater(\_SB.P1IS,0)) {
+				sleep(32)
+			}
+			Notify(\_SB.PCI0.STCR.PMRY.PSLA, 0x01) /* NOTIFY_DEVICE_CHECK */
+			store(one, \_SB.P1PR)
+		}
+
+		if (\_SB.P2PR) {
+			if (LGreater(\_SB.P2IS,0)) {
+				sleep(32)
+			}
+			Notify(\_SB.PCI0.STCR.SEDY.SMST, 0x01) /* NOTIFY_DEVICE_CHECK */
+			store(one, \_SB.P2PR)
+		}
+
+		if (\_SB.P3PR) {
+			if (LGreater(\_SB.P3IS,0)) {
+				sleep(32)
+			}
+			Notify(\_SB.PCI0.STCR.SEDY.SSLA, 0x01) /* NOTIFY_DEVICE_CHECK */
+			store(one, \_SB.P3PR)
+		}
+	}
+}
Index: src/mainboard/technexion/tim5690/acpi/usb.asl
===================================================================
--- src/mainboard/technexion/tim5690/acpi/usb.asl	(revision 0)
+++ src/mainboard/technexion/tim5690/acpi/usb.asl	(revision 0)
@@ -0,0 +1,162 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2008 Advanced Micro Devices, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301 USA
+ */
+
+/* simple name description */
+/*
+DefinitionBlock ("DSDT.AML","DSDT",0x01,"XXXXXX","XXXXXXXX",0x00010001
+		)
+	{
+		Include ("usb.asl")
+	}
+*/
+Method(UCOC, 0) {
+	Sleep(20)
+    	Store(0x13,CMTI)
+	Store(0,GPSL)
+}
+
+/* USB Port 0 overcurrent uses Gpm 0 */
+If(LLessEqual(UOM0,9)) {
+	Scope (\_GPE) {
+		Method (_L13) {
+			UCOC()
+			if(LEqual(GPB0,PLC0)) {
+				Not(PLC0,PLC0)
+				Store(PLC0, \_SB.PT0D)
+			}
+		}
+	}
+}
+
+/* USB Port 1 overcurrent uses Gpm 1 */
+If (LLessEqual(UOM1,9)) {
+	Scope (\_GPE) {
+		Method (_L14) {
+			UCOC()
+			if (LEqual(GPB1,PLC1)) {
+				Not(PLC1,PLC1)
+				Store(PLC1, \_SB.PT1D)
+			}
+		}
+	}
+}
+
+/* USB Port 2 overcurrent uses Gpm 2 */
+If (LLessEqual(UOM2,9)) {
+	Scope (\_GPE) {
+		Method (_L15) {
+			UCOC()
+			if (LEqual(GPB2,PLC2)) {
+				Not(PLC2,PLC2)
+				Store(PLC2, \_SB.PT2D)
+			}
+		}
+	}
+}
+
+/* USB Port 3 overcurrent uses Gpm 3 */
+If (LLessEqual(UOM3,9)) {
+	Scope (\_GPE) {
+		Method (_L16) {
+			UCOC()
+			if (LEqual(GPB3,PLC3)) {
+				Not(PLC3,PLC3)
+				Store(PLC3, \_SB.PT3D)
+			}
+		}
+	}
+}
+
+/* USB Port 4 overcurrent uses Gpm 4 */
+If (LLessEqual(UOM4,9)) {
+	Scope (\_GPE) {
+		Method (_L19) {
+			UCOC()
+			if (LEqual(GPB4,PLC4)) {
+				Not(PLC4,PLC4)
+				Store(PLC4, \_SB.PT4D)
+			}
+		}
+	}
+}
+
+/* USB Port 5 overcurrent uses Gpm 5 */
+/* If (LLessEqual(UOM5,9)) {
+*	Scope (\_GPE) {
+*		Method (_L1A) {
+*			UCOC()
+*			if (LEqual(GPB5,PLC5)) {
+*				Not(PLC5,PLC5)
+*				Store(PLC5, \_SB.PT5D)
+*			}
+*		}
+*	}
+* }
+*/
+
+/* USB Port 6 overcurrent uses Gpm 6 */
+If (LLessEqual(UOM6,9)) {
+	Scope (\_GPE) {
+		/* Method (_L1C) { */
+		Method (_L06) {
+			UCOC()
+			if (LEqual(GPB6,PLC6)) {
+				Not(PLC6,PLC6)
+				Store(PLC6, \_SB.PT6D)
+			}
+		}
+	}
+}
+
+/* USB Port 7 overcurrent uses Gpm 7 */
+If (LLessEqual(UOM7,9)) {
+ 	Scope (\_GPE) {
+		/* Method (_L1D) { */
+		Method (_L07) {
+			UCOC()
+			if (LEqual(GPB7,PLC7)) {
+				Not(PLC7,PLC7)
+				Store(PLC7, \_SB.PT7D)
+			}
+		}
+	}
+}
+
+/* USB Port 8 overcurrent uses Gpm 8 */
+If (LLessEqual(UOM8,9)) {
+	Scope (\_GPE) {
+		Method (_L17) {
+			if (LEqual(G8IS,PLC8)) {
+				Not(PLC8,PLC8)
+				Store(PLC8, \_SB.PT8D)
+			}
+		}
+	}
+}
+
+/* USB Port 9 overcurrent uses Gpm 9 */
+If (LLessEqual(UOM9,9)) {
+	Scope (\_GPE) {
+		Method (_L0E) {
+			if (LEqual(G9IS,0)) {
+			Store(1,\_SB.PT9D)
+			}
+		}
+	}
+}
Index: src/mainboard/technexion/tim5690/acpi/statdef.asl
===================================================================
--- src/mainboard/technexion/tim5690/acpi/statdef.asl	(revision 0)
+++ src/mainboard/technexion/tim5690/acpi/statdef.asl	(revision 0)
@@ -0,0 +1,93 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2008 Advanced Micro Devices, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301 USA
+ */
+
+
+/* Status and notification definitions */
+
+#define STA_MISSING			    0x00
+#define STA_PRESENT			    0x01
+#define	STA_ENABLED			    0x03
+#define STA_DISABLED		    0x09
+#define	STA_INVISIBLE		    0x0B
+#define	STA_UNAVAILABLE		    0x0D
+#define	STA_VISIBLE			    0x0F
+
+/* SMBus status codes */
+#define SMB_OK                  0x00
+#define SMB_UnknownFail         0x07
+#define SMB_DevAddrNAK          0x10
+#define SMB_DeviceError         0x11
+#define SMB_DevCmdDenied        0x12
+#define SMB_UnknownErr          0x13
+#define SMB_DevAccDenied        0x17
+#define SMB_Timeout             0x18
+#define SMB_HstUnsuppProtocol   0x19
+#define SMB_Busy                0x1A
+#define SMB_PktChkError         0x1F
+
+/* Device Object Notification Values */
+#define	NOTIFY_BUS_CHECK		0x00
+#define	NOTIFY_DEVICE_CHECK		0x01
+#define	NOTIFY_DEVICE_WAKE		0x02
+#define	NOTIFY_EJECT_REQUEST	0x03
+#define	NOTIFY_DEVICE_CHECK_JR	0x04
+#define	NOTIFY_FREQUENCY_ERROR	0x05
+#define	NOTIFY_BUS_MODE			0x06
+#define	NOTIFY_POWER_FAULT		0x07
+#define	NOTIFY_CAPABILITIES		0x08
+#define	NOTIFY_PLD_CHECK		0x09
+#define	NOTIFY_SLIT_UPDATE		0x0B
+
+/* Battery Device Notification Values */
+#define	NOTIFY_BAT_STATUSCHG	0x80
+#define	NOTIFY_BAT_INFOCHG  	0x81
+#define	NOTIFY_BAT_MAINTDATA    0x82
+
+/* Power Source Object Notification Values */
+#define	NOTIFY_PWR_STATUSCHG	0x80
+
+/* Thermal Zone Object Notification Values */
+#define	NOTIFY_TZ_STATUSCHG	    0x80
+#define	NOTIFY_TZ_TRIPPTCHG	    0x81
+#define	NOTIFY_TZ_DEVLISTCHG	0x82
+#define	NOTIFY_TZ_RELTBLCHG 	0x83
+
+/* Power Button Notification Values */
+#define	NOTIFY_POWER_BUTTON		0x80
+
+/* Sleep Button Notification Values */
+#define	NOTIFY_SLEEP_BUTTON		0x80
+
+/* Lid Notification Values */
+#define	NOTIFY_LID_STATUSCHG	0x80
+
+/* Processor Device Notification Values */
+#define	NOTIFY_CPU_PPCCHG   	0x80
+#define	NOTIFY_CPU_CSTATECHG  	0x81
+#define	NOTIFY_CPU_THROTLCHG    0x82
+
+/* User Presence Device Notification Values */
+#define	NOTIFY_USR_PRESNCECHG	0x80
+
+/* Battery Device Notification Values */
+#define	NOTIFY_ALS_ILLUMCHG 	0x80
+#define	NOTIFY_ALS_COLORTMPCHG 	0x81
+#define	NOTIFY_ALS_RESPCHG      0x82
+
+
Index: src/mainboard/technexion/tim5690/acpi/doit.sh
===================================================================
--- src/mainboard/technexion/tim5690/acpi/doit.sh	(revision 0)
+++ src/mainboard/technexion/tim5690/acpi/doit.sh	(revision 0)
@@ -0,0 +1,3 @@
+#!/bin/bash
+#cpp -P dsdt.asl > dsdt.i
+iasl dsdt.asl
Index: src/mainboard/technexion/tim5690/acpi/dsdt.asl
===================================================================
--- src/mainboard/technexion/tim5690/acpi/dsdt.asl	(revision 0)
+++ src/mainboard/technexion/tim5690/acpi/dsdt.asl	(revision 0)
@@ -0,0 +1,1791 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2008 Advanced Micro Devices, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301 USA
+ */
+
+/* DefinitionBlock Statement */
+DefinitionBlock (
+	"DSDT.AML",           /* Output filename */
+	"DSDT",                 /* Signature */
+	0x02,		/* DSDT Revision, needs to be 2 for 64bit */
+	"TECHNEXION",               /* OEMID */
+	"TIM-5690",          /* TABLE ID */
+	0x00010001	/* OEM Revision */
+	)
+{	/* Start of ASL file */
+	/* Include ("debug.asl") */		/* Include global debug methods if needed */
+
+	/* Data to be patched by the BIOS during POST */
+	/* FIXME the patching is not done yet! */
+	/* Memory related values */
+	Name(LOMH, 0x0)	/* Start of unused memory in C0000-E0000 range */
+	Name(PBAD, 0x0)	/* Address of BIOS area (If TOM2 != 0, Addr >> 16) */
+	Name(PBLN, 0x0)	/* Length of BIOS area */
+
+	Name(PCBA, 0xE0000000)	/* Base address of PCIe config space */
+	Name(HPBA, 0xFED00000)	/* Base address of HPET table */
+
+	Name(SSFG, 0x0D)		/* S1 support: bit 0, S2 Support: bit 1, etc. S0 & S5 assumed */
+
+	/* USB overcurrent mapping pins.   */
+	Name(UOM0, 0)
+	Name(UOM1, 2)
+	Name(UOM2, 0)
+	Name(UOM3, 7)
+	Name(UOM4, 2)
+	Name(UOM5, 2)
+	Name(UOM6, 6)
+	Name(UOM7, 2)
+	Name(UOM8, 6)
+	Name(UOM9, 6)
+
+	/* Some global data */
+	Name(OSTP, 3)		/* Assume nothing. WinXp = 1, Vista = 2, Linux = 3, WinCE = 4 */
+	Name(OSV, Ones)	/* Assume nothing */
+	Name(PMOD, One)	/* Assume APIC */
+
+	/* PIC IRQ mapping registers, C00h-C01h */
+	OperationRegion(PRQM, SystemIO, 0x00000C00, 0x00000002)
+		Field(PRQM, ByteAcc, NoLock, Preserve) {
+		PRQI, 0x00000008,
+		PRQD, 0x00000008,  /* Offset: 1h */
+	}
+	IndexField(PRQI, PRQD, ByteAcc, NoLock, Preserve) {
+		PINA, 0x00000008,	/* Index 0  */
+		PINB, 0x00000008,	/* Index 1 */
+		PINC, 0x00000008,	/* Index 2 */
+		PIND, 0x00000008,	/* Index 3 */
+		AINT, 0x00000008,	/* Index 4 */
+		SINT, 0x00000008,	/*  Index 5 */
+		, 0x00000008,	             /* Index 6 */
+		AAUD, 0x00000008,	/* Index 7 */
+		AMOD, 0x00000008,	/* Index 8 */
+		PINE, 0x00000008,	/* Index 9 */
+		PINF, 0x00000008,	/* Index A */
+		PING, 0x00000008,	/* Index B */
+		PINH, 0x00000008,	/* Index C */
+	}
+
+	/* PCI Error control register */
+	OperationRegion(PERC, SystemIO, 0x00000C14, 0x00000001)
+		Field(PERC, ByteAcc, NoLock, Preserve) {
+		SENS, 0x00000001,
+		PENS, 0x00000001,
+		SENE, 0x00000001,
+		PENE, 0x00000001,
+	}
+
+	/* Client Management index/data registers */
+	OperationRegion(CMT, SystemIO, 0x00000C50, 0x00000002)
+		Field(CMT, ByteAcc, NoLock, Preserve) {
+		CMTI,      8,
+		/* Client Management Data register */
+		G64E,   1,
+		G64O,      1,
+		G32O,      2,
+		,       2,
+		GPSL,     2,
+	}
+
+	/* GPM Port register */
+	OperationRegion(GPT, SystemIO, 0x00000C52, 0x00000001)
+		Field(GPT, ByteAcc, NoLock, Preserve) {
+		GPB0,1,
+		GPB1,1,
+		GPB2,1,
+		GPB3,1,
+		GPB4,1,
+		GPB5,1,
+		GPB6,1,
+		GPB7,1,
+	}
+
+	/* Flash ROM program enable register */
+	OperationRegion(FRE, SystemIO, 0x00000C6F, 0x00000001)
+		Field(FRE, ByteAcc, NoLock, Preserve) {
+		,     0x00000006,
+		FLRE, 0x00000001,
+	}
+
+	/* PM2 index/data registers */
+	OperationRegion(PM2R, SystemIO, 0x00000CD0, 0x00000002)
+		Field(PM2R, ByteAcc, NoLock, Preserve) {
+		PM2I, 0x00000008,
+		PM2D, 0x00000008,
+	}
+
+	/* Power Management I/O registers */
+	OperationRegion(PIOR, SystemIO, 0x00000CD6, 0x00000002)
+		Field(PIOR, ByteAcc, NoLock, Preserve) {
+		PIOI, 0x00000008,
+		PIOD, 0x00000008,
+	}
+	IndexField (PIOI, PIOD, ByteAcc, NoLock, Preserve) {
+		Offset(0x00),	/* MiscControl */
+		, 1,
+		T1EE, 1,
+		T2EE, 1,
+		Offset(0x01),	/* MiscStatus */
+		, 1,
+		T1E, 1,
+		T2E, 1,
+		Offset(0x04),	/* SmiWakeUpEventEnable3 */
+		, 7,
+		SSEN, 1,
+		Offset(0x07),	/* SmiWakeUpEventStatus3 */
+		, 7,
+		CSSM, 1,
+		Offset(0x10),	/* AcpiEnable */
+		, 6,
+		PWDE, 1,
+		Offset(0x1C),	/* ProgramIoEnable */
+		, 3,
+		MKME, 1,
+		IO3E, 1,
+		IO2E, 1,
+		IO1E, 1,
+		IO0E, 1,
+		Offset(0x1D),	/* IOMonitorStatus */
+		, 3,
+		MKMS, 1,
+		IO3S, 1,
+		IO2S, 1,
+		IO1S, 1,
+		IO0S,1,
+		Offset(0x20),	/* AcpiPmEvtBlk */
+		APEB, 16,
+		Offset(0x36),	/* GEvtLevelConfig */
+		, 6,
+		ELC6, 1,
+		ELC7, 1,
+		Offset(0x37),	/* GPMLevelConfig0 */
+		, 3,
+		PLC0, 1,
+		PLC1, 1,
+		PLC2, 1,
+		PLC3, 1,
+		PLC8, 1,
+		Offset(0x38),	/* GPMLevelConfig1 */
+		, 1,
+		 PLC4, 1,
+		 PLC5, 1,
+		, 1,
+		 PLC6, 1,
+		 PLC7, 1,
+		Offset(0x3B),	/* PMEStatus1 */
+		GP0S, 1,
+		GM4S, 1,
+		GM5S, 1,
+		APS, 1,
+		GM6S, 1,
+		GM7S, 1,
+		GP2S, 1,
+		STSS, 1,
+		Offset(0x55),	/* SoftPciRst */
+		SPRE, 1,
+		, 1,
+		, 1,
+		PNAT, 1,
+		PWMK, 1,
+		PWNS, 1,
+
+		/* 	Offset(0x61), */	/*  Options_1 */
+		/* 		,7,  */
+		/* 		R617,1, */
+
+		Offset(0x65),	/* UsbPMControl */
+		, 4,
+		URRE, 1,
+		Offset(0x68),	/* MiscEnable68 */
+		, 3,
+		TMTE, 1,
+		, 1,
+		Offset(0x92),	/* GEVENTIN */
+		, 7,
+		E7IS, 1,
+		Offset(0x96),	/* GPM98IN */
+		G8IS, 1,
+		G9IS, 1,
+		Offset(0x9A),	/* EnhanceControl */
+		,7,
+		HPDE, 1,
+		Offset(0xA8),	/* PIO7654Enable */
+		IO4E, 1,
+		IO5E, 1,
+		IO6E, 1,
+		IO7E, 1,
+		Offset(0xA9),	/* PIO7654Status */
+		IO4S, 1,
+		IO5S, 1,
+		IO6S, 1,
+		IO7S, 1,
+	}
+
+	/* PM1 Event Block
+	* First word is PM1_Status, Second word is PM1_Enable
+	*/
+	OperationRegion(P1EB, SystemIO, APEB, 0x04)
+		Field(P1EB, ByteAcc, NoLock, Preserve) {
+		TMST, 1,
+		,    3,
+		BMST,    1,
+		GBST,   1,
+		Offset(0x01),
+		PBST, 1,
+		, 1,
+		RTST, 1,
+		, 3,
+		PWST, 1,
+		SPWS, 1,
+		Offset(0x02),
+		TMEN, 1,
+		, 4,
+		GBEN, 1,
+		Offset(0x03),
+		PBEN, 1,
+		, 1,
+		RTEN, 1,
+		, 3,
+		PWDA, 1,
+	}
+
+	Scope(\_SB) {
+
+		/* PCIe Configuration Space for 16 busses */
+		OperationRegion(PCFG, SystemMemory, PCBA, 0x01000000) /* Each bus consumes 1MB */
+			Field(PCFG, ByteAcc, NoLock, Preserve) {
+			/* Byte offsets are computed using the following technique:
+			   * ((bus number + 1) * ((device number * 8) * 4096)) + register offset
+			   * The 8 comes from 8 functions per device, and 4096 bytes per function config space
+			*/
+			Offset(0x00090024),	/* Byte offset to SATA register 24h - Bus 0, Device 18, Function 0 */
+			STB5, 32,
+			Offset(0x00098042),	/* Byte offset to OHCI0 register 42h - Bus 0, Device 19, Function 0 */
+			PT0D, 1,
+			PT1D, 1,
+			PT2D, 1,
+			PT3D, 1,
+			PT4D, 1,
+			PT5D, 1,
+			PT6D, 1,
+			PT7D, 1,
+			PT8D, 1,
+			PT9D, 1,
+			Offset(0x000A0004),	/* Byte offset to SMBUS	register 4h - Bus 0, Device 20, Function 0 */
+			SBIE, 1,
+			SBME, 1,
+			Offset(0x000A0008),	/* Byte offset to SMBUS	register 8h - Bus 0, Device 20, Function 0 */
+			SBRI, 8,
+			Offset(0x000A0014),	/* Byte offset to SMBUS	register 14h - Bus 0, Device 20, Function 0 */
+			SBB1, 32,
+			Offset(0x000A0078),	/* Byte offset to SMBUS	register 78h - Bus 0, Device 20, Function 0 */
+			,14,
+			P92E, 1,		/* Port92 decode enable */
+		}
+
+		OperationRegion(SB5, SystemMemory, STB5, 0x1000)
+			Field(SB5, AnyAcc, NoLock, Preserve)
+			{
+			/* Port 0 */
+			Offset(0x120),		/* Port 0 Task file status */
+			P0ER, 1,
+			, 2,
+			P0DQ, 1,
+			, 3,
+			P0BY, 1,
+			Offset(0x128),		/* Port 0 Serial ATA status */
+			P0DD, 4,
+			, 4,
+			P0IS, 4,
+			Offset(0x12C),		/* Port 0 Serial ATA control */
+			P0DI, 4,
+			Offset(0x130),		/* Port 0 Serial ATA error */
+			, 16,
+			P0PR, 1,
+
+			/* Port 1 */
+			offset(0x1A0),		/* Port 1 Task file status */
+			P1ER, 1,
+			, 2,
+			P1DQ, 1,
+			, 3,
+			P1BY, 1,
+			Offset(0x1A8),		/* Port 1 Serial ATA status */
+			P1DD, 4,
+			, 4,
+			P1IS, 4,
+			Offset(0x1AC),		/* Port 1 Serial ATA control */
+			P1DI, 4,
+			Offset(0x1B0),		/* Port 1 Serial ATA error */
+			, 16,
+			P1PR, 1,
+
+			/* Port 2 */
+			Offset(0x220),		/* Port 2 Task file status */
+			P2ER, 1,
+			, 2,
+			P2DQ, 1,
+			, 3,
+			P2BY, 1,
+			Offset(0x228),		/* Port 2 Serial ATA status */
+			P2DD, 4,
+			, 4,
+			P2IS, 4,
+			Offset(0x22C),		/* Port 2 Serial ATA control */
+			P2DI, 4,
+			Offset(0x230),		/* Port 2 Serial ATA error */
+			, 16,
+			P2PR, 1,
+
+			/* Port 3 */
+			Offset(0x2A0),		/* Port 3 Task file status */
+			P3ER, 1,
+			, 2,
+			P3DQ, 1,
+			, 3,
+			P3BY, 1,
+			Offset(0x2A8),		/* Port 3 Serial ATA status */
+			P3DD, 4,
+			, 4,
+			P3IS, 4,
+			Offset(0x2AC),		/* Port 3 Serial ATA control */
+			P3DI, 4,
+			Offset(0x2B0),		/* Port 3 Serial ATA error */
+			, 16,
+			P3PR, 1,
+		}
+	}
+
+	Include ("routing.asl")
+
+	Scope(\_SB) {
+
+		Method(CkOT, 0){
+
+			if(LNotEqual(OSTP, Ones)) {Return(OSTP)}	/* OS version was already detected */
+
+			if(CondRefOf(\_OSI,Local1))
+			{
+				Store(1, OSTP)                /* Assume some form of XP */
+				if (\_OSI("Windows 2006"))      /* Vista */
+				{
+					Store(2, OSTP)
+				}
+			} else {
+				If(WCMP(\_OS,"Linux")) {
+					Store(3, OSTP)            /* Linux */
+				} Else {
+					Store(4, OSTP)            /* Gotta be WinCE */
+				}
+			}
+			Return(OSTP)
+		}
+
+		Method(_PIC, 0x01, NotSerialized)
+		{
+			If (Arg0)
+			{
+				\_SB.CIRQ()
+			}
+			Store(Arg0, PMOD)
+		}
+
+		Method(CIRQ, 0x00, NotSerialized)
+		{
+			Store(0, PINA)
+			Store(0, PINB)
+			Store(0, PINC)
+			Store(0, PIND)
+			Store(0, PINE)
+			Store(0, PINF)
+			Store(0, PING)
+			Store(0, PINH)
+		}
+
+		Name(IRQB, ResourceTemplate(){
+			IRQ(Level,ActiveLow,Shared){15}
+		})
+
+		Name(IRQP, ResourceTemplate(){
+			IRQ(Level,ActiveLow,Exclusive){3, 4, 5, 7, 10, 11, 12, 15}
+		})
+
+		Name(PITF, ResourceTemplate(){
+			IRQ(Level,ActiveLow,Exclusive){9}
+		})
+
+		Device(INTA) {
+			Name(_HID, EISAID("PNP0C0F"))
+			Name(_UID, 1)
+
+			Method(_STA, 0) {
+				if (PINA) {
+					Return(0x0B) /* sata is invisible */
+				} else {
+					Return(0x09) /* sata is disabled */
+				}
+			} /* End Method(_SB.INTA._STA) */
+
+			Method(_DIS ,0) {
+				/* DBGO("\\_SB\\LNKA\\_DIS\n") */
+				Store(0, PINA)
+			} /* End Method(_SB.INTA._DIS) */
+
+			Method(_PRS ,0) {
+				/* DBGO("\\_SB\\LNKA\\_PRS\n") */
+				Return(IRQP)
+			} /* Method(_SB.INTA._PRS) */
+
+			Method(_CRS ,0) {
+				/* DBGO("\\_SB\\LNKA\\_CRS\n") */
+				CreateWordField(IRQB, 0x1, IRQN)
+				ShiftLeft(1, PINA, IRQN)
+				Return(IRQB)
+			} /* Method(_SB.INTA._CRS) */
+
+			Method(_SRS, 1) {
+				/* DBGO("\\_SB\\LNKA\\_CRS\n") */
+				CreateWordField(ARG0, 1, IRQM)
+
+				/* Use lowest available IRQ */
+				FindSetRightBit(IRQM, Local0)
+				if (Local0) {
+					Decrement(Local0)
+				}
+				Store(Local0, PINA)
+			} /* End Method(_SB.INTA._SRS) */
+		} /* End Device(INTA) */
+
+		Device(INTB) {
+			Name(_HID, EISAID("PNP0C0F"))
+			Name(_UID, 2)
+
+			Method(_STA, 0) {
+				if (PINB) {
+					Return(0x0B) /* sata is invisible */
+				} else {
+					Return(0x09) /* sata is disabled */
+				}
+			} /* End Method(_SB.INTB._STA) */
+
+			Method(_DIS ,0) {
+				/* DBGO("\\_SB\\LNKB\\_DIS\n") */
+				Store(0, PINB)
+			} /* End Method(_SB.INTB._DIS) */
+
+			Method(_PRS ,0) {
+				/* DBGO("\\_SB\\LNKB\\_PRS\n") */
+				Return(IRQP)
+			} /* Method(_SB.INTB._PRS) */
+
+			Method(_CRS ,0) {
+				/* DBGO("\\_SB\\LNKB\\_CRS\n") */
+				CreateWordField(IRQB, 0x1, IRQN)
+				ShiftLeft(1, PINB, IRQN)
+				Return(IRQB)
+			} /* Method(_SB.INTB._CRS) */
+
+			Method(_SRS, 1) {
+				/* DBGO("\\_SB\\LNKB\\_CRS\n") */
+				CreateWordField(ARG0, 1, IRQM)
+
+				/* Use lowest available IRQ */
+				FindSetRightBit(IRQM, Local0)
+				if (Local0) {
+					Decrement(Local0)
+				}
+				Store(Local0, PINB)
+			} /* End Method(_SB.INTB._SRS) */
+		} /* End Device(INTB)  */
+
+		Device(INTC) {
+			Name(_HID, EISAID("PNP0C0F"))
+			Name(_UID, 3)
+
+			Method(_STA, 0) {
+				if (PINC) {
+					Return(0x0B) /* sata is invisible */
+				} else {
+					Return(0x09) /* sata is disabled */
+				}
+			} /* End Method(_SB.INTC._STA) */
+
+			Method(_DIS ,0) {
+				/* DBGO("\\_SB\\LNKC\\_DIS\n") */
+				Store(0, PINC)
+			} /* End Method(_SB.INTC._DIS) */
+
+			Method(_PRS ,0) {
+				/* DBGO("\\_SB\\LNKC\\_PRS\n") */
+				Return(IRQP)
+			} /* Method(_SB.INTC._PRS) */
+
+			Method(_CRS ,0) {
+				/* DBGO("\\_SB\\LNKC\\_CRS\n") */
+				CreateWordField(IRQB, 0x1, IRQN)
+				ShiftLeft(1, PINC, IRQN)
+				Return(IRQB)
+			} /* Method(_SB.INTC._CRS) */
+
+			Method(_SRS, 1) {
+				/* DBGO("\\_SB\\LNKC\\_CRS\n") */
+				CreateWordField(ARG0, 1, IRQM)
+
+				/* Use lowest available IRQ */
+				FindSetRightBit(IRQM, Local0)
+				if (Local0) {
+					Decrement(Local0)
+				}
+				Store(Local0, PINC)
+			} /* End Method(_SB.INTC._SRS) */
+		} /* End Device(INTC)  */
+
+		Device(INTD) {
+			Name(_HID, EISAID("PNP0C0F"))
+			Name(_UID, 4)
+
+			Method(_STA, 0) {
+				if (PIND) {
+					Return(0x0B) /* sata is invisible */
+				} else {
+					Return(0x09) /* sata is disabled */
+				}
+			} /* End Method(_SB.INTD._STA) */
+
+			Method(_DIS ,0) {
+				/* DBGO("\\_SB\\LNKD\\_DIS\n") */
+				Store(0, PIND)
+			} /* End Method(_SB.INTD._DIS) */
+
+			Method(_PRS ,0) {
+				/* DBGO("\\_SB\\LNKD\\_PRS\n") */
+				Return(IRQP)
+			} /* Method(_SB.INTD._PRS) */
+
+			Method(_CRS ,0) {
+				/* DBGO("\\_SB\\LNKD\\_CRS\n") */
+				CreateWordField(IRQB, 0x1, IRQN)
+				ShiftLeft(1, PIND, IRQN)
+				Return(IRQB)
+			} /* Method(_SB.INTD._CRS) */
+
+			Method(_SRS, 1) {
+				/* DBGO("\\_SB\\LNKD\\_CRS\n") */
+				CreateWordField(ARG0, 1, IRQM)
+
+				/* Use lowest available IRQ */
+				FindSetRightBit(IRQM, Local0)
+				if (Local0) {
+					Decrement(Local0)
+				}
+				Store(Local0, PIND)
+			} /* End Method(_SB.INTD._SRS) */
+		} /* End Device(INTD)  */
+
+		Device(INTE) {
+			Name(_HID, EISAID("PNP0C0F"))
+			Name(_UID, 5)
+
+			Method(_STA, 0) {
+				if (PINE) {
+					Return(0x0B) /* sata is invisible */
+				} else {
+					Return(0x09) /* sata is disabled */
+				}
+			} /* End Method(_SB.INTE._STA) */
+
+			Method(_DIS ,0) {
+				/* DBGO("\\_SB\\LNKE\\_DIS\n") */
+				Store(0, PINE)
+			} /* End Method(_SB.INTE._DIS) */
+
+			Method(_PRS ,0) {
+				/* DBGO("\\_SB\\LNKE\\_PRS\n") */
+				Return(IRQP)
+			} /* Method(_SB.INTE._PRS) */
+
+			Method(_CRS ,0) {
+				/* DBGO("\\_SB\\LNKE\\_CRS\n") */
+				CreateWordField(IRQB, 0x1, IRQN)
+				ShiftLeft(1, PINE, IRQN)
+				Return(IRQB)
+			} /* Method(_SB.INTE._CRS) */
+
+			Method(_SRS, 1) {
+				/* DBGO("\\_SB\\LNKE\\_CRS\n") */
+				CreateWordField(ARG0, 1, IRQM)
+
+				/* Use lowest available IRQ */
+				FindSetRightBit(IRQM, Local0)
+				if (Local0) {
+					Decrement(Local0)
+				}
+				Store(Local0, PINE)
+			} /* End Method(_SB.INTE._SRS) */
+		} /* End Device(INTE)  */
+
+		Device(INTF) {
+			Name(_HID, EISAID("PNP0C0F"))
+			Name(_UID, 6)
+
+			Method(_STA, 0) {
+				if (PINF) {
+					Return(0x0B) /* sata is invisible */
+				} else {
+					Return(0x09) /* sata is disabled */
+				}
+			} /* End Method(_SB.INTF._STA) */
+
+			Method(_DIS ,0) {
+				/* DBGO("\\_SB\\LNKF\\_DIS\n") */
+				Store(0, PINF)
+			} /* End Method(_SB.INTF._DIS) */
+
+			Method(_PRS ,0) {
+				/* DBGO("\\_SB\\LNKF\\_PRS\n") */
+				Return(PITF)
+			} /* Method(_SB.INTF._PRS) */
+
+			Method(_CRS ,0) {
+				/* DBGO("\\_SB\\LNKF\\_CRS\n") */
+				CreateWordField(IRQB, 0x1, IRQN)
+				ShiftLeft(1, PINF, IRQN)
+				Return(IRQB)
+			} /* Method(_SB.INTF._CRS) */
+
+			Method(_SRS, 1) {
+				/* DBGO("\\_SB\\LNKF\\_CRS\n") */
+				CreateWordField(ARG0, 1, IRQM)
+
+				/* Use lowest available IRQ */
+				FindSetRightBit(IRQM, Local0)
+				if (Local0) {
+					Decrement(Local0)
+				}
+				Store(Local0, PINF)
+			} /*  End Method(_SB.INTF._SRS) */
+		} /* End Device(INTF)  */
+
+		Device(INTG) {
+			Name(_HID, EISAID("PNP0C0F"))
+			Name(_UID, 7)
+
+			Method(_STA, 0) {
+				if (PING) {
+					Return(0x0B) /* sata is invisible */
+				} else {
+					Return(0x09) /* sata is disabled */
+				}
+			} /* End Method(_SB.INTG._STA)  */
+
+			Method(_DIS ,0) {
+				/* DBGO("\\_SB\\LNKG\\_DIS\n") */
+				Store(0, PING)
+			} /* End Method(_SB.INTG._DIS)  */
+
+			Method(_PRS ,0) {
+				/* DBGO("\\_SB\\LNKG\\_PRS\n") */
+				Return(IRQP)
+			} /* Method(_SB.INTG._CRS)  */
+
+			Method(_CRS ,0) {
+				/* DBGO("\\_SB\\LNKG\\_CRS\n") */
+				CreateWordField(IRQB, 0x1, IRQN)
+				ShiftLeft(1, PING, IRQN)
+				Return(IRQB)
+			} /* Method(_SB.INTG._CRS)  */
+
+			Method(_SRS, 1) {
+				/* DBGO("\\_SB\\LNKG\\_CRS\n") */
+				CreateWordField(ARG0, 1, IRQM)
+
+				/* Use lowest available IRQ */
+				FindSetRightBit(IRQM, Local0)
+				if (Local0) {
+					Decrement(Local0)
+				}
+				Store(Local0, PING)
+			} /* End Method(_SB.INTG._SRS)  */
+		} /* End Device(INTG)  */
+
+		Device(INTH) {
+			Name(_HID, EISAID("PNP0C0F"))
+			Name(_UID, 8)
+
+			Method(_STA, 0) {
+				if (PINH) {
+					Return(0x0B) /* sata is invisible */
+				} else {
+					Return(0x09) /* sata is disabled */
+				}
+			} /* End Method(_SB.INTH._STA)  */
+
+			Method(_DIS ,0) {
+				/* DBGO("\\_SB\\LNKH\\_DIS\n") */
+				Store(0, PINH)
+			} /* End Method(_SB.INTH._DIS)  */
+
+			Method(_PRS ,0) {
+				/* DBGO("\\_SB\\LNKH\\_PRS\n") */
+				Return(IRQP)
+			} /* Method(_SB.INTH._CRS)  */
+
+			Method(_CRS ,0) {
+				/* DBGO("\\_SB\\LNKH\\_CRS\n") */
+				CreateWordField(IRQB, 0x1, IRQN)
+				ShiftLeft(1, PINH, IRQN)
+				Return(IRQB)
+			} /* Method(_SB.INTH._CRS)  */
+
+			Method(_SRS, 1) {
+				/* DBGO("\\_SB\\LNKH\\_CRS\n") */
+				CreateWordField(ARG0, 1, IRQM)
+
+				/* Use lowest available IRQ */
+				FindSetRightBit(IRQM, Local0)
+				if (Local0) {
+					Decrement(Local0)
+				}
+				Store(Local0, PINH)
+			} /* End Method(_SB.INTH._SRS)  */
+		} /* End Device(INTH)   */
+
+	}   /* End Scope(_SB)  */
+
+
+	/* Supported sleep states: */
+	Name(\_S0, Package () {0x00, 0x00, 0x00, 0x00} )	/* (S0) - working state */
+
+	If (LAnd(SSFG, 0x01)) {
+		Name(\_S1, Package () {0x01, 0x01, 0x00, 0x00} )	/* (S1) - sleeping w/CPU context */
+	}
+	If (LAnd(SSFG, 0x02)) {
+		Name(\_S2, Package () {0x02, 0x02, 0x00, 0x00} )	/* (S2) - "light" Suspend to RAM */
+	}
+	If (LAnd(SSFG, 0x04)) {
+		Name(\_S3, Package () {0x03, 0x03, 0x00, 0x00} )	/* (S3) - Suspend to RAM */
+	}
+	If (LAnd(SSFG, 0x08)) {
+		Name(\_S4, Package () {0x04, 0x04, 0x00, 0x00} )	/* (S4) - Suspend to Disk */
+	}
+
+	Name(\_S5, Package () {0x05, 0x05, 0x00, 0x00} )	/* (S5) - Soft Off */
+
+	Name(\_SB.CSPS ,0)				/* Current Sleep State (S0, S1, S2, S3, S4, S5) */
+	Name(CSMS, 0)			/* Current System State */
+
+	/* Wake status package */
+	Name(WKST,Package(){Zero, Zero})
+
+	/*
+	* \_PTS - Prepare to Sleep method
+	*
+	*	Entry:
+	*		Arg0=The value of the sleeping state S1=1, S2=2, etc
+	*
+	* Exit:
+	*		-none-
+	*
+	* The _PTS control method is executed at the beginning of the sleep process
+	* for S1-S5. The sleeping value is passed to the _PTS control method.	This
+	* control method may be executed a relatively long time before entering the
+	* sleep state and the OS may abort	the operation without notification to
+	* the ACPI driver.  This method cannot modify the configuration or power
+	* state of any device in the system.
+	*/
+	Method(\_PTS, 1) {
+		/* DBGO("\\_PTS\n") */
+		/* DBGO("From S0 to S") */
+		/* DBGO(Arg0) */
+		/* DBGO("\n") */
+
+		/* Don't allow PCIRST# to reset USB */
+		if (LEqual(Arg0,3)){
+			Store(0,URRE)
+		}
+
+		/* Clear sleep SMI status flag and enable sleep SMI trap. */
+		/*Store(One, CSSM)
+		Store(One, SSEN)*/
+
+		/* On older chips, clear PciExpWakeDisEn */
+		/*if (LLessEqual(\_SB.SBRI, 0x13)) {
+		*    	Store(0,\_SB.PWDE)
+		*}
+		*/
+
+		/* Clear wake status structure. */
+		Store(0, Index(WKST,0))
+		Store(0, Index(WKST,1))
+		\_SB.PCI0.SIOS (Arg0)
+	} /* End Method(\_PTS) */
+
+	/*
+	*  The following method results in a "not a valid reserved NameSeg"
+	*  warning so I have commented it out for the duration.  It isn't
+	*  used, so it could be removed.
+	*
+	*
+	*  	\_GTS OEM Going To Sleep method
+	*
+	*  	Entry:
+	*  		Arg0=The value of the sleeping state S1=1, S2=2
+	*
+	*  	Exit:
+	*  		-none-
+	*
+	*  Method(\_GTS, 1) {
+	*  DBGO("\\_GTS\n")
+	*  DBGO("From S0 to S")
+	*  DBGO(Arg0)
+	*  DBGO("\n")
+	*  }
+	*/
+
+	/*
+	*	\_BFS OEM Back From Sleep method
+	*
+	*	Entry:
+	*		Arg0=The value of the sleeping state S1=1, S2=2
+	*
+	*	Exit:
+	*		-none-
+	*/
+	Method(\_BFS, 1) {
+		/* DBGO("\\_BFS\n") */
+		/* DBGO("From S") */
+		/* DBGO(Arg0) */
+		/* DBGO(" to S0\n") */
+	}
+
+	/*
+	*  \_WAK System Wake method
+	*
+	*	Entry:
+	*		Arg0=The value of the sleeping state S1=1, S2=2
+	*
+	*	Exit:
+	*		Return package of 2 DWords
+	*		Dword 1 - Status
+	*			0x00000000	wake succeeded
+	*			0x00000001	Wake was signaled but failed due to lack of power
+	*			0x00000002	Wake was signaled but failed due to thermal condition
+	*		Dword 2 - Power Supply state
+	*			if non-zero the effective S-state the power supply entered
+	*/
+	Method(\_WAK, 1) {
+		/* DBGO("\\_WAK\n") */
+		/* DBGO("From S") */
+		/* DBGO(Arg0) */
+		/* DBGO(" to S0\n") */
+
+		/* Re-enable HPET */
+		Store(1,HPDE)
+
+		/* Restore PCIRST# so it resets USB */
+		if (LEqual(Arg0,3)){
+			Store(1,URRE)
+		}
+
+		/* Arbitrarily clear PciExpWakeStatus */
+		Store(PWST, PWST)
+
+		/* if(DeRefOf(Index(WKST,0))) {
+		*	Store(0, Index(WKST,1))
+		* } else {
+		*	Store(Arg0, Index(WKST,1))
+		* }
+		*/
+		\_SB.PCI0.SIOW (Arg0)
+		Return(WKST)
+	} /* End Method(\_WAK) */
+
+	Scope(\_GPE) {	/* Start Scope GPE */
+		/*  General event 0  */
+		/* Method(_L00) {
+		*	DBGO("\\_GPE\\_L00\n")
+		* }
+		*/
+
+		/*  General event 1  */
+		/* Method(_L01) {
+		*	DBGO("\\_GPE\\_L00\n")
+		* }
+		*/
+
+		/*  General event 2  */
+		/* Method(_L02) {
+		*	DBGO("\\_GPE\\_L00\n")
+		* }
+		*/
+
+		/*  General event 3  */
+		//Method(_L03) {
+		//	/* DBGO("\\_GPE\\_L00\n") */
+		//	Notify(\_SB.PWRB, 0x02) /* NOTIFY_DEVICE_WAKE */
+		//}
+
+		/*  General event 4  */
+		/* Method(_L04) {
+		*	DBGO("\\_GPE\\_L00\n")
+		* }
+		*/
+
+		/*  General event 5  */
+		/* Method(_L05) {
+		*	DBGO("\\_GPE\\_L00\n")
+		* }
+		*/
+
+		/*  General event 6 - Used for GPM6, moved to USB.asl */
+		/* Method(_L06) {
+		*	DBGO("\\_GPE\\_L00\n")
+		* }
+		*/
+
+		/*  General event 7 - Used for GPM7, moved to USB.asl */
+		/* Method(_L07) {
+		*	DBGO("\\_GPE\\_L07\n")
+		* }
+		*/
+
+		/*  Legacy PM event  */
+		Method(_L08) {
+			/* DBGO("\\_GPE\\_L08\n") */
+		}
+
+		/*  Temp warning (TWarn) event  */
+		Method(_L09) {
+			/* DBGO("\\_GPE\\_L09\n") */
+			Notify (\_TZ.TZ00, 0x80)
+		}
+
+		/*  Reserved  */
+		/* Method(_L0A) {
+		*	DBGO("\\_GPE\\_L0A\n")
+		* }
+		*/
+
+		/*  USB controller PME#  */
+		Method(_L0B) {
+			/* DBGO("\\_GPE\\_L0B\n") */
+			Notify(\_SB.PCI0.UOH1, 0x02) /* NOTIFY_DEVICE_WAKE */
+			Notify(\_SB.PCI0.UOH2, 0x02) /* NOTIFY_DEVICE_WAKE */
+			Notify(\_SB.PCI0.UOH3, 0x02) /* NOTIFY_DEVICE_WAKE */
+			Notify(\_SB.PCI0.UOH4, 0x02) /* NOTIFY_DEVICE_WAKE */
+			Notify(\_SB.PCI0.UOH5, 0x02) /* NOTIFY_DEVICE_WAKE */
+			Notify(\_SB.PCI0.UEH1, 0x02) /* NOTIFY_DEVICE_WAKE */
+			Notify(\_SB.PWRB, 0x02) /* NOTIFY_DEVICE_WAKE */
+		}
+
+		/*  AC97 controller PME#  */
+		/* Method(_L0C) {
+		*	DBGO("\\_GPE\\_L0C\n")
+		* }
+		*/
+
+		/*  OtherTherm PME#  */
+		/* Method(_L0D) {
+		*	DBGO("\\_GPE\\_L0D\n")
+		* }
+		*/
+
+		/*  GPM9 SCI event - Moved to USB.asl */
+		/* Method(_L0E) {
+		*	DBGO("\\_GPE\\_L0E\n")
+		* }
+		*/
+
+		/*  PCIe HotPlug event  */
+		/* Method(_L0F) {
+		* 	DBGO("\\_GPE\\_L0F\n")
+		* }
+		*/
+
+		/*  ExtEvent0 SCI event  */
+		Method(_L10) {
+			/* DBGO("\\_GPE\\_L10\n") */
+		}
+
+
+		/*  ExtEvent1 SCI event  */
+		Method(_L11) {
+			/* DBGO("\\_GPE\\_L11\n") */
+		}
+
+		/*  PCIe PME# event  */
+		/* Method(_L12) {
+		*	DBGO("\\_GPE\\_L12\n")
+		* }
+		*/
+
+		/*  GPM0 SCI event - Moved to USB.asl */
+		/* Method(_L13) {
+		* 	DBGO("\\_GPE\\_L13\n")
+		* }
+		*/
+
+		/*  GPM1 SCI event - Moved to USB.asl */
+		/* Method(_L14) {
+		* 	DBGO("\\_GPE\\_L14\n")
+		* }
+		*/
+
+		/*  GPM2 SCI event - Moved to USB.asl */
+		/* Method(_L15) {
+		* 	DBGO("\\_GPE\\_L15\n")
+		* }
+		*/
+
+		/*  GPM3 SCI event - Moved to USB.asl */
+		/* Method(_L16) {
+		*	DBGO("\\_GPE\\_L16\n")
+		* }
+		*/
+
+		/*  GPM8 SCI event - Moved to USB.asl */
+		/* Method(_L17) {
+		* 	DBGO("\\_GPE\\_L17\n")
+		* }
+		*/
+
+		/*  GPIO0 or GEvent8 event  */
+		Method(_L18) {
+			/* DBGO("\\_GPE\\_L18\n") */
+			Notify(\_SB.PCI0.PBR2, 0x02) /* NOTIFY_DEVICE_WAKE */
+			Notify(\_SB.PCI0.PBR4, 0x02) /* NOTIFY_DEVICE_WAKE */
+			Notify(\_SB.PCI0.PBR5, 0x02) /* NOTIFY_DEVICE_WAKE */
+			Notify(\_SB.PCI0.PBR6, 0x02) /* NOTIFY_DEVICE_WAKE */
+			Notify(\_SB.PCI0.PBR7, 0x02) /* NOTIFY_DEVICE_WAKE */
+			Notify(\_SB.PWRB, 0x02) /* NOTIFY_DEVICE_WAKE */
+		}
+
+		/*  GPM4 SCI event - Moved to USB.asl */
+		/* Method(_L19) {
+		* 	DBGO("\\_GPE\\_L19\n")
+		* }
+		*/
+
+		/*  GPM5 SCI event - Moved to USB.asl */
+		/* Method(_L1A) {
+		*	DBGO("\\_GPE\\_L1A\n")
+		* }
+		*/
+
+		/*  Azalia SCI event  */
+		Method(_L1B) {
+			/* DBGO("\\_GPE\\_L1B\n") */
+			Notify(\_SB.PCI0.AZHD, 0x02) /* NOTIFY_DEVICE_WAKE */
+			Notify(\_SB.PWRB, 0x02) /* NOTIFY_DEVICE_WAKE */
+		}
+
+		/*  GPM6 SCI event - Reassigned to _L06 */
+		/* Method(_L1C) {
+		*	DBGO("\\_GPE\\_L1C\n")
+		* }
+		*/
+
+		/*  GPM7 SCI event - Reassigned to _L07 */
+		/* Method(_L1D) {
+		*	DBGO("\\_GPE\\_L1D\n")
+		* }
+		*/
+
+		/*  GPIO2 or GPIO66 SCI event  */
+		/* Method(_L1E) {
+		* 	DBGO("\\_GPE\\_L1E\n")
+		* }
+		*/
+
+		/*  SATA SCI event - Moved to sata.asl */
+		/* Method(_L1F) {
+		*	 DBGO("\\_GPE\\_L1F\n")
+		* }
+		*/
+
+	} 	/* End Scope GPE */
+
+	Include ("usb.asl")
+
+	/* South Bridge */
+	Scope(\_SB) { /* Start \_SB scope */
+		Include ("globutil.asl") /* global utility methods expected within the \_SB scope */
+
+		/*  _SB.PCI0 */
+		/* Note: Only need HID on Primary Bus */
+		Device(PCI0) {
+			External (TOM1)
+			External (TOM2)
+			Name(_HID, EISAID("PNP0A03"))
+			Name(_ADR, 0x00180000)	/* Dev# = BSP Dev#, Func# = 0 */
+			Method(_BBN, 0) { /* Bus number = 0 */
+				Return(0)
+			}
+			Method(_STA, 0) {
+				/* DBGO("\\_SB\\PCI0\\_STA\n") */
+				Return(0x0B)     /* Status is visible */
+			}
+
+			Method(_PRT,0) {
+				If(PMOD){ Return(APR0) }   /* APIC mode */
+				Return (PR0)                  /* PIC Mode */
+			} /* end _PRT */
+
+			/* Describe the Northbridge devices */
+			Device(AMRT) {
+				Name(_ADR, 0x00000000)
+			} /* end AMRT */
+
+			/* The internal GFX bridge */
+			Device(AGPB) {
+				Name(_ADR, 0x00010000)
+				Name(_PRW, Package() {0x18, 4})
+				Method(_PRT,0) {
+					Return (APR1)
+				}
+			}  /* end AGPB */
+
+			/* The external GFX bridge */
+			Device(PBR2) {
+				Name(_ADR, 0x00020000)
+				Name(_PRW, Package() {0x18, 4})
+				Method(_PRT,0) {
+					If(PMOD){ Return(APS2) }   /* APIC mode */
+					Return (PS2)                  /* PIC Mode */
+				} /* end _PRT */
+			} /* end PBR2 */
+
+			/* Dev3 is also an external GFX bridge, not used in Herring */
+
+			Device(PBR4) {
+				Name(_ADR, 0x00040000)
+				Name(_PRW, Package() {0x18, 4})
+				Method(_PRT,0) {
+					If(PMOD){ Return(APS4) }   /* APIC mode */
+					Return (PS4)                  /* PIC Mode */
+				} /* end _PRT */
+			} /* end PBR4 */
+
+			Device(PBR5) {
+				Name(_ADR, 0x00050000)
+				Name(_PRW, Package() {0x18, 4})
+				Method(_PRT,0) {
+					If(PMOD){ Return(APS5) }   /* APIC mode */
+					Return (PS5)                  /* PIC Mode */
+				} /* end _PRT */
+			} /* end PBR5 */
+
+			Device(PBR6) {
+				Name(_ADR, 0x00060000)
+				Name(_PRW, Package() {0x18, 4})
+				Method(_PRT,0) {
+					If(PMOD){ Return(APS6) }   /* APIC mode */
+					Return (PS6)                  /* PIC Mode */
+				} /* end _PRT */
+			} /* end PBR6 */
+
+			/* The onboard EtherNet chip */
+			Device(PBR7) {
+				Name(_ADR, 0x00070000)
+				Name(_PRW, Package() {0x18, 4})
+				Method(_PRT,0) {
+					If(PMOD){ Return(APS7) }   /* APIC mode */
+					Return (PS7)                  /* PIC Mode */
+				} /* end _PRT */
+			} /* end PBR7 */
+
+
+			/* PCI slot 1, 2, 3 */
+			Device(PIBR) {
+				Name(_ADR, 0x00140004)
+				Name(_PRW, Package() {0x18, 4})
+
+				Method(_PRT, 0) {
+					Return (PCIB)
+				}
+			}
+
+			/* Describe the Southbridge devices */
+			Device(STCR) {
+				Name(_ADR, 0x00120000)
+				Include ("sata.asl")
+			} /* end STCR */
+
+			Device(UOH1) {
+				Name(_ADR, 0x00130000)
+				Name(_PRW, Package() {0x0B, 3})
+			} /* end UOH1 */
+
+			Device(UOH2) {
+				Name(_ADR, 0x00130001)
+				Name(_PRW, Package() {0x0B, 3})
+			} /* end UOH2 */
+
+			Device(UOH3) {
+				Name(_ADR, 0x00130002)
+				Name(_PRW, Package() {0x0B, 3})
+			} /* end UOH3 */
+
+			Device(UOH4) {
+				Name(_ADR, 0x00130003)
+				Name(_PRW, Package() {0x0B, 3})
+			} /* end UOH4 */
+
+			Device(UOH5) {
+				Name(_ADR, 0x00130004)
+				Name(_PRW, Package() {0x0B, 3})
+			} /* end UOH5 */
+
+			Device(UEH1) {
+				Name(_ADR, 0x00130005)
+				Name(_PRW, Package() {0x0B, 3})
+			} /* end UEH1 */
+
+			Device(SBUS) {
+				Name(_ADR, 0x00140000)
+			} /* end SBUS */
+
+			/* Primary (and only) IDE channel */
+			Device(IDEC) {
+				Name(_ADR, 0x00140001)
+				Include ("ide.asl")
+			} /* end IDEC */
+
+			Device(AZHD) {
+				Name(_ADR, 0x00140002)
+				OperationRegion(AZPD, PCI_Config, 0x00, 0x100)
+					Field(AZPD, AnyAcc, NoLock, Preserve) {
+					offset (0x42),
+					NSDI, 1,
+					NSDO, 1,
+					NSEN, 1,
+					offset (0x44),
+					IPCR, 4,
+					offset (0x54),
+					PWST, 2,
+					, 6,
+					PMEB, 1,
+					, 6,
+					PMST, 1,
+					offset (0x62),
+					MMCR, 1,
+					offset (0x64),
+					MMLA, 32,
+					offset (0x68),
+					MMHA, 32,
+					offset (0x6C),
+					MMDT, 16,
+				}
+
+				Method(_INI) {
+					If(LEqual(OSTP,3)){   /* If we are running Linux */
+						Store(zero, NSEN)
+						Store(one, NSDO)
+						Store(one, NSDI)
+					}
+				}
+			} /* end AZHD */
+
+			Device(LIBR) {
+				Name(_ADR, 0x00140003)
+				/* Method(_INI) {
+				*	DBGO("\\_SB\\PCI0\\LpcIsaBr\\_INI\n")
+				} */ /* End Method(_SB.SBRDG._INI) */
+
+				/* Real Time Clock Device */
+				Device(RTC0) {
+					Name(_HID, EISAID("PNP0B01"))	/* AT Real Time Clock */
+					Name(_CRS, ResourceTemplate() {
+						IRQNoFlags(){8}
+						IO(Decode16,0x0070, 0x0070, 0, 2)
+						/* IO(Decode16,0x0070, 0x0070, 0, 4) */
+					})
+				} /* End Device(_SB.PCI0.LpcIsaBr.RTC0) */
+
+				Device(TMR) {	/* Timer */
+					Name(_HID,EISAID("PNP0100"))	/* System Timer */
+					Name(_CRS, ResourceTemplate() {
+						IRQNoFlags(){0}
+						IO(Decode16, 0x0040, 0x0040, 0, 4)
+						/* IO(Decode16, 0x0048, 0x0048, 0, 4) */
+					})
+				} /* End Device(_SB.PCI0.LpcIsaBr.TMR) */
+
+				Device(SPKR) {	/* Speaker */
+					Name(_HID,EISAID("PNP0800"))	/* AT style speaker */
+					Name(_CRS, ResourceTemplate() {
+						IO(Decode16, 0x0061, 0x0061, 0, 1)
+					})
+				} /* End Device(_SB.PCI0.LpcIsaBr.SPKR) */
+
+				Device(PIC) {
+					Name(_HID,EISAID("PNP0000"))	/* AT Interrupt Controller */
+					Name(_CRS, ResourceTemplate() {
+						IRQNoFlags(){2}
+						IO(Decode16,0x0020, 0x0020, 0, 2)
+						IO(Decode16,0x00A0, 0x00A0, 0, 2)
+						/* IO(Decode16, 0x00D0, 0x00D0, 0x10, 0x02) */
+						/* IO(Decode16, 0x04D0, 0x04D0, 0x10, 0x02) */
+					})
+				} /* End Device(_SB.PCI0.LpcIsaBr.PIC) */
+
+				Device(MAD) { /* 8257 DMA */
+					Name(_HID,EISAID("PNP0200"))	/* Hardware Device ID */
+					Name(_CRS, ResourceTemplate() {
+						DMA(Compatibility,BusMaster,Transfer8){4}
+						IO(Decode16, 0x0000, 0x0000, 0x10, 0x10)
+						IO(Decode16, 0x0081, 0x0081, 0x10, 0x03)
+						IO(Decode16, 0x0087, 0x0087, 0x10, 0x01)
+						IO(Decode16, 0x0089, 0x0089, 0x10, 0x03)
+						IO(Decode16, 0x008F, 0x008F, 0x10, 0x01)
+						IO(Decode16, 0x00C0, 0x00C0, 0x10, 0x20)
+					}) /* End Name(_SB.PCI0.LpcIsaBr.MAD._CRS) */
+				} /* End Device(_SB.PCI0.LpcIsaBr.MAD) */
+
+				Device(COPR) {
+					Name(_HID,EISAID("PNP0C04"))	/* Math Coprocessor */
+					Name(_CRS, ResourceTemplate() {
+						IO(Decode16, 0x00F0, 0x00F0, 0, 0x10)
+						IRQNoFlags(){13}
+					})
+				} /* End Device(_SB.PCI0.LpcIsaBr.COPR) */
+
+				Device(HPTM) {
+					Name(_HID,EISAID("PNP0103"))
+					Name(CRS,ResourceTemplate()	{
+						Memory32Fixed(ReadOnly,0xFED00000, 0x00000400, HPT)	/* 1kb reserved space */
+					})
+					Method(_STA, 0) {
+						Return(0x0F) /* sata is visible */
+					}
+					Method(_CRS, 0)	{
+						CreateDwordField(CRS, ^HPT._BAS, HPBA)
+						Store(HPBA, HPBA)
+						Return(CRS)
+					}
+				} /* End Device(_SB.PCI0.LpcIsaBr.COPR) */
+			} /* end LIBR */
+
+			Device(HPBR) {
+				Name(_ADR, 0x00140004)
+			} /* end HostPciBr */
+
+			Device(ACAD) {
+				Name(_ADR, 0x00140005)
+			} /* end Ac97audio */
+
+			Device(ACMD) {
+				Name(_ADR, 0x00140006)
+			} /* end Ac97modem */
+
+			/* ITE IT8712F Support */
+			OperationRegion (IOID, SystemIO, 0x2E, 0x02)	/* sometimes it is 0x4E */
+				Field (IOID, ByteAcc, NoLock, Preserve)
+				{
+					SIOI,   8,    SIOD,   8		/* 0x2E and 0x2F */
+				}
+
+			IndexField (SIOI, SIOD, ByteAcc, NoLock, Preserve)
+			{
+					Offset (0x07),
+				LDN,	8,	/* Logical Device Number */
+					Offset (0x20),
+				CID1,	8,	/* Chip ID Byte 1, 0x87 */
+				CID2,	8,	/* Chip ID Byte 2, 0x12 */
+					Offset (0x30),
+				ACTR,	8,	/* Function activate */
+					Offset (0xF0),
+				APC0,	8,	/* APC/PME Event Enable Register */
+				APC1,	8,	/* APC/PME Status Register */
+				APC2,	8,      /* APC/PME Control Register 1 */
+				APC3,	8,	/* Environment Controller Special Configuration Register */
+				APC4,	8	/* APC/PME Control Register 2 */
+			}
+
+			/* Enter the IT8712F MB PnP Mode */
+			Method (EPNP)
+			{
+				Store(0x87, SIOI)
+				Store(0x01, SIOI)
+				Store(0x55, SIOI)
+				Store(0x55, SIOI) /* IT8712F magic number */
+			}
+			/* Exit the IT8712F MB PnP Mode */
+			Method (XPNP)
+			{
+				Store (0x02, SIOI)
+				Store (0x02, SIOD)
+			}
+
+			/*
+			 * Keyboard PME is routed to SB600 Gevent3. We can wake
+			 * up the system by pressing the key.
+			 */
+		        Method (SIOS, 1)
+			{
+				/* We only enable KBD PME for S5. */
+				If (LLess (Arg0, 0x05))
+				{
+					EPNP()
+					/* DBGO("IT8712F\n") */
+
+					Store (0x4, LDN)
+					Store (One, ACTR)  /* Enable EC */
+					/*
+					Store (0x4, LDN)
+					Store (0x04, APC4)
+					*/  /* falling edge. which mode? Not sure. */
+
+					Store (0x4, LDN)
+					Store (0x08, APC1) /* clear PME status, Use 0x18 for mouse & KBD */
+					Store (0x4, LDN)
+					Store (0x08, APC0) /* enable PME, Use 0x18 for mouse & KBD */
+
+					XPNP()
+				}
+			}
+			Method (SIOW, 1)
+			{
+				EPNP()
+				Store (0x4, LDN)
+				Store (Zero, APC0) /* disable keyboard PME */
+				Store (0x4, LDN)
+				Store (0xFF, APC1) /* clear keyboard PME status */
+				XPNP()
+			}
+
+			Name(CRES, ResourceTemplate() {
+				IO(Decode16, 0x0CF8, 0x0CF8, 1,	8)
+
+				WORDIO(ResourceProducer, MinFixed, MaxFixed, PosDecode, EntireRange,
+					0x0000,			/* address granularity */
+					0x0000,			/* range minimum */
+					0x0CF7,			/* range maximum */
+					0x0000,			/* translation */
+					0x0CF8			/* length */
+				)
+
+				WORDIO(ResourceProducer, MinFixed, MaxFixed, PosDecode, EntireRange,
+					0x0000,			/* address granularity */
+					0x0D00,			/* range minimum */
+					0xFFFF,			/* range maximum */
+					0x0000,			/* translation */
+					0xF300			/* length */
+				)
+
+				Memory32Fixed(READWRITE, 0, 0xA0000, BSMM)
+				Memory32Fixed(READONLY, 0x000A0000, 0x00020000, VGAM) 	/* VGA memory space */
+				Memory32Fixed(READONLY, 0x000C0000, 0x00020000, EMM1)	/* Assume C0000-E0000 empty */
+				Memory32Fixed(READONLY, 0x000E0000, 0x00020000, RDBS)   /* BIOS ROM area */
+
+				/* DRAM Memory from 1MB to TopMem */
+				Memory32Fixed(READWRITE, 0x00100000, 0, DMLO)	/* 1MB to TopMem */
+
+				/* BIOS space just below 4GB */
+				DWORDMemory(
+					ResourceProducer, PosDecode, MinFixed, MaxFixed, Cacheable, ReadWrite,
+					0x00,			/* Granularity */
+					0x00000000,		/* Min */
+					0x00000000,		/* Max */
+					0x00000000,		/* Translation */
+					0x00000000,		/* Max-Min, RLEN */
+					,,
+					PCBM
+				)
+
+				/* DRAM memory from 4GB to TopMem2 */
+				QWORDMemory(ResourceProducer, PosDecode, MinFixed, MaxFixed, Cacheable, ReadWrite,
+					0xFFFFFFFF,		/* Granularity */
+					0x00000000,		/*  Min */
+					0x00000000,		/* Max */
+					0x00000000,		/* Translation */
+					0x00000000,		/* Max-Min, RLEN */
+					,,
+					DMHI
+				)
+
+				/* BIOS space just below 16EB */
+				QWORDMemory(ResourceProducer, PosDecode, MinFixed, MaxFixed, Cacheable, ReadWrite,
+					0xFFFFFFFF,		/* Granularity */
+					0x00000000,		/* Min */
+					0x00000000,		/*  Max */
+					0x00000000,		/* Translation */
+					0x00000000,		/* Max-Min, RLEN */
+					,,
+					PEBM
+				)
+
+			}) /* End Name(_SB.PCI0.CRES) */
+
+			Method(_CRS, 0) {
+				/* DBGO("\\_SB\\PCI0\\_CRS\n") */
+
+				CreateDWordField(CRES, ^EMM1._BAS, EM1B)
+				CreateDWordField(CRES, ^EMM1._LEN, EM1L)
+				CreateDWordField(CRES, ^DMLO._BAS, DMLB)
+				CreateDWordField(CRES, ^DMLO._LEN, DMLL)
+				CreateDWordField(CRES, ^PCBM._MIN, PBMB)
+				CreateDWordField(CRES, ^PCBM._LEN, PBML)
+
+				CreateQWordField(CRES, ^DMHI._MIN, DMHB)
+				CreateQWordField(CRES, ^DMHI._LEN, DMHL)
+				CreateQWordField(CRES, ^PEBM._MIN, EBMB)
+				CreateQWordField(CRES, ^PEBM._LEN, EBML)
+
+				If(LGreater(LOMH, 0xC0000)){
+					Store(0xC0000, EM1B)	/* Hole above C0000 and below E0000 */
+					Subtract(LOMH, 0xC0000, EM1L)	/* subtract start, assumes allocation from C0000 going up */
+				}
+
+				/* Set size of memory from 1MB to TopMem */
+				Subtract(TOM1, 0x100000, DMLL)
+
+				/*
+				* If(LNotEqual(TOM2, 0x00000000)){
+				*	Store(0x100000000,DMHB)			DRAM from 4GB to TopMem2
+				*	Subtract(TOM2, 0x100000000, DMHL)
+				* }
+				*/
+
+				/* If there is no memory above 4GB, put the BIOS just below 4GB */
+				If(LEqual(TOM2, 0x00000000)){
+					Store(PBAD,PBMB)			/* Reserve the "BIOS" space */
+					Store(PBLN,PBML)
+				}
+				Else {  /* Otherwise, put the BIOS just below 16EB */
+					ShiftLeft(PBAD,16,EBMB)		/* Reserve the "BIOS" space */
+					Store(PBLN,EBML)
+				}
+
+				Return(CRES) /* note to change the Name buffer */
+			}  /* end of Method(_SB.PCI0._CRS) */
+
+			/*
+			*
+			*               FIRST METHOD CALLED UPON BOOT
+			*
+			*  1. If debugging, print current OS and ACPI interpreter.
+			*  2. Get PCI Interrupt routing from ACPI VSM, this
+			*     value is based on user choice in BIOS setup.
+			*/
+			Method(_INI, 0) {
+				/* DBGO("\\_SB\\_INI\n") */
+				/* DBGO("   DSDT.ASL code from ") */
+				/* DBGO(__DATE__) */
+				/* DBGO(" ") */
+				/* DBGO(__TIME__) */
+				/* DBGO("\n   Sleep states supported: ") */
+				/* DBGO("\n") */
+				/* DBGO("   \\_OS=") */
+				/* DBGO(\_OS) */
+				/* DBGO("\n   \\_REV=") */
+				/* DBGO(\_REV) */
+				/* DBGO("\n") */
+
+				/* Determine the OS we're running on */
+				CkOT()
+
+				/* On older chips, clear PciExpWakeDisEn */
+				/*if (LLessEqual(\SBRI, 0x13)) {
+				*    	Store(0,\PWDE)
+				* }
+				*/
+			} /* End Method(_SB._INI) */
+		} /* End Device(PCI0)  */
+
+		Device(PWRB) {	/* Start Power button device */
+			Name(_HID, EISAID("PNP0C0C"))
+			Name(_UID, 0xAA)
+			//Name(_PRW, Package () {3, 0x04})	/* wake from S1-S4 */
+			Name(_STA, 0x0B) /* sata is invisible */
+		}
+	} /* End \_SB scope */
+
+	Scope(\_SI) {
+		Method(_SST, 1) {
+			/* DBGO("\\_SI\\_SST\n") */
+			/* DBGO("   New Indicator state: ") */
+			/* DBGO(Arg0) */
+			/* DBGO("\n") */
+		}
+	} /* End Scope SI */
+
+	Mutex (SBX0, 0x00)
+	OperationRegion (SMB0, SystemIO, 0xB00, 0x0C)
+		Field (SMB0, ByteAcc, NoLock, Preserve) {
+			HSTS,   8, /* SMBUS status */
+			SSTS,   8,  /* SMBUS slave status */
+			HCNT,   8,  /* SMBUS control */
+			HCMD,   8,  /* SMBUS host cmd */
+			HADD,   8,  /* SMBUS address */
+			DAT0,   8,  /* SMBUS data0 */
+			DAT1,   8,  /* SMBUS data1 */
+			BLKD,   8,  /* SMBUS block data */
+			SCNT,   8,  /* SMBUS slave control */
+			SCMD,   8,  /* SMBUS shaow cmd */
+			SEVT,   8,  /* SMBUS slave event */
+			SDAT,   8  /* SMBUS slave data */
+	}
+
+	Method (WCLR, 0, NotSerialized) { /* clear SMBUS status register */
+		Store (0x1E, HSTS)
+		Store (0xFA, Local0)
+		While (LAnd (LNotEqual (And (HSTS, 0x1E), Zero), LGreater (Local0, Zero))) {
+			Stall (0x64)
+			Decrement (Local0)
+		}
+
+		Return (Local0)
+	}
+
+	Method (SWTC, 1, NotSerialized) {
+		Store (Arg0, Local0)
+		Store (0x07, Local2)
+		Store (One, Local1)
+		While (LEqual (Local1, One)) {
+			Store (And (HSTS, 0x1E), Local3)
+			If (LNotEqual (Local3, Zero)) { /* read sucess */
+				If (LEqual (Local3, 0x02)) {
+					Store (Zero, Local2)
+				}
+
+				Store (Zero, Local1)
+			}
+			Else {
+				If (LLess (Local0, 0x0A)) { /* read failure */
+					Store (0x10, Local2)
+					Store (Zero, Local1)
+				}
+				Else {
+					Sleep (0x0A) /* 10 ms, try again */
+					Subtract (Local0, 0x0A, Local0)
+				}
+			}
+		}
+
+		Return (Local2)
+	}
+
+	Method (SMBR, 3, NotSerialized) {
+		Store (0x07, Local0)
+		If (LEqual (Acquire (SBX0, 0xFFFF), Zero)) {
+			Store (WCLR (), Local0) /* clear SMBUS status register before read data */
+			If (LEqual (Local0, Zero)) {
+				Release (SBX0)
+				Return (0x0)
+			}
+
+			Store (0x1F, HSTS)
+			Store (Or (ShiftLeft (Arg1, One), One), HADD)
+			Store (Arg2, HCMD)
+			If (LEqual (Arg0, 0x07)) {
+				Store (0x48, HCNT) /* read byte */
+			}
+
+			Store (SWTC (0x03E8), Local1) /* 1000 ms */
+			If (LEqual (Local1, Zero)) {
+				If (LEqual (Arg0, 0x07)) {
+					Store (DAT0, Local0)
+				}
+			}
+			Else {
+				Store (Local1, Local0)
+			}
+
+			Release (SBX0)
+		}
+
+		/* DBGO("the value of SMBusData0 register ") */
+		/* DBGO(Arg2) */
+		/* DBGO(" is ") */
+		/* DBGO(Local0) */
+		/* DBGO("\n") */
+
+		Return (Local0)
+	}
+
+	/* THERMAL */
+	Scope(\_TZ) {
+		Name (KELV, 2732)
+		Name (THOT, 800)
+		Name (TCRT, 850)
+
+		ThermalZone(TZ00) {
+			Method(_AC0,0) {	/* Active Cooling 0 (0=highest fan speed) */
+				/* DBGO("\\_TZ\\TZ00\\_AC0\n") */
+				Return(Add(0, 2730))
+			}
+			Method(_AL0,0) {	/* Returns package of cooling device to turn on */
+				/* DBGO("\\_TZ\\TZ00\\_AL0\n") */
+				Return(Package() {\_TZ.TZ00.FAN0})
+			}
+			Device (FAN0) {
+				Name(_HID, EISAID("PNP0C0B"))
+				Name(_PR0, Package() {PFN0})
+			}
+
+			PowerResource(PFN0,0,0) {
+				Method(_STA) {
+					Store(0xF,Local0)
+					Return(Local0)
+				}
+				Method(_ON) {
+					/* DBGO("\\_TZ\\TZ00\\FAN0 _ON\n") */
+				}
+				Method(_OFF) {
+					/* DBGO("\\_TZ\\TZ00\\FAN0 _OFF\n") */
+				}
+			}
+
+			Method(_HOT,0) {	/* return hot temp in tenths degree Kelvin */
+				/* DBGO("\\_TZ\\TZ00\\_HOT\n") */
+				Return (Add (THOT, KELV))
+			}
+			Method(_CRT,0) {	/* return critical temp in tenths degree Kelvin */
+				/* DBGO("\\_TZ\\TZ00\\_CRT\n") */
+				Return (Add (TCRT, KELV))
+			}
+			Method(_TMP,0) {	/* return current temp of this zone */
+				Store (SMBR (0x07, 0x4C,, 0x00), Local0)
+				If (LGreater (Local0, 0x10)) {
+					Store (Local0, Local1)
+				}
+				Else {
+					Add (Local0, THOT, Local0)
+					Return (Add (400, KELV))
+				}
+
+				Store (SMBR (0x07, 0x4C, 0x01), Local0)
+				/* only the two MSBs in the external temperature low byte are used, resolution 0.25. We ignore it */
+				/* Store (SMBR (0x07, 0x4C, 0x10), Local2) */
+				If (LGreater (Local0, 0x10)) {
+					If (LGreater (Local0, Local1)) {
+						Store (Local0, Local1)
+					}
+
+					Multiply (Local1, 10, Local1)
+					Return (Add (Local1, KELV))
+				}
+				Else {
+					Add (Local0, THOT, Local0)
+					Return (Add (400 , KELV))
+				}
+			} /* end of _TMP */
+		} /* end of TZ00 */
+	}
+}
+/* End of ASL file */
Index: src/mainboard/technexion/tim5690/mainboard.c
===================================================================
--- src/mainboard/technexion/tim5690/mainboard.c	(revision 0)
+++ src/mainboard/technexion/tim5690/mainboard.c	(revision 0)
@@ -0,0 +1,217 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2008 Advanced Micro Devices, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301 USA
+ */
+
+#include <console/console.h>
+#include <device/device.h>
+#include <device/pci.h>
+#include <arch/io.h>
+#include <boot/coreboot_tables.h>
+#include <cpu/x86/msr.h>
+#include <cpu/amd/mtrr.h>
+#include <device/pci_def.h>
+#include <../southbridge/amd/sb600/sb600.h>
+#include "chip.h"
+
+#define ADT7461_ADDRESS 0x4C
+#define ARA_ADDRESS     0x0C /* Alert Response Address */
+#define SMBUS_IO_BASE 0x1000
+
+extern int do_smbus_read_byte(u32 smbus_io_base, u32 device, u32 address);
+extern int do_smbus_write_byte(u32 smbus_io_base, u32 device, u32 address,
+			       u8 val);
+extern void lb_add_memory_range(struct lb_memory *mem, uint32_t type,
+				uint64_t start, uint64_t size);
+#define ADT7461_read_byte(address) \
+	do_smbus_read_byte(SMBUS_IO_BASE, ADT7461_ADDRESS, address)
+#define ARA_read_byte(address) \
+	do_smbus_read_byte(SMBUS_IO_BASE, ARA_ADDRESS, address)
+#define ADT7461_write_byte(address, val) \
+	do_smbus_write_byte(SMBUS_IO_BASE, ADT7461_ADDRESS, address, val)
+
+uint64_t uma_memory_base, uma_memory_size;
+
+
+
+/***************************************************
+* This board, the TIM-5690 has two Marvel 88e5056 PCI-E 
+* 10/100/1000 chips on board. 
+* Both of their pin PERSTn pins are connected to GPIO 5 of the
+* SB600 southbridge.
+****************************************************/
+static void enable_onboard_nic()
+{
+
+	u8 byte;
+	device_t sm_dev;
+
+	printk_info("enable_onboard_nic.\n");
+
+	sm_dev = dev_find_slot(0, PCI_DEVFN(0x14, 0));
+
+	byte = pci_read_config8(sm_dev, 0x9a);
+	byte |= ( 1 << 7);
+	pci_write_config8(sm_dev, 0x9a, byte);
+
+	byte=pm_ioread(0x59);
+	byte &= ~( 1<< 5);
+	pm_iowrite(0x59,byte);
+
+	byte = pci_read_config8(sm_dev, 0xA8);
+
+	byte |= (1 << 1); //set bit 1 to high
+	pci_write_config8(sm_dev, 0xA8, byte);
+}
+
+/* set thermal config
+ */
+static void set_thermal_config()
+{
+	u8 byte;
+	u16 word;
+	device_t sm_dev;
+	struct bus pbus;
+
+	/* set ADT 7461 */
+	ADT7461_write_byte(0x0B, 0x50);	/* Local Temperature Hight limit */
+	ADT7461_write_byte(0x0C, 0x00);	/* Local Temperature Low limit */
+	ADT7461_write_byte(0x0D, 0x50);	/* External Temperature Hight limit  High Byte */
+	ADT7461_write_byte(0x0E, 0x00);	/* External Temperature Low limit High Byte */
+
+	ADT7461_write_byte(0x19, 0x55);	/* External THERM limit */
+	ADT7461_write_byte(0x20, 0x55);	/* Local THERM limit */
+
+	byte = ADT7461_read_byte(0x02);	/* read status register to clear it */
+	ARA_read_byte(0x05); /* A hardware alert can only be cleared by the master sending an ARA as a read command */
+	printk_info("Init adt7461 end , status 0x02 %02x\n", byte);
+
+	/* sb600 settings for thermal config */
+	/* set SB600 GPIO 64 to GPIO with pull-up */
+	byte = pm2_ioread(0x42);
+	byte &= 0x3f;
+	pm2_iowrite(0x42, byte);
+
+	/* set GPIO 64 to input */
+	sm_dev = dev_find_slot(0, PCI_DEVFN(0x14, 0));
+	word = pci_read_config16(sm_dev, 0x56);
+	word |= 1 << 7;
+	pci_write_config16(sm_dev, 0x56, word);
+
+	/* set GPIO 64 internal pull-up */
+	byte = pm2_ioread(0xf0);
+	byte &= 0xee;
+	pm2_iowrite(0xf0, byte);
+
+	/* set Talert to be active low */
+	byte = pm_ioread(0x67);
+	byte &= ~(1 << 5);
+	pm_iowrite(0x67, byte);
+
+	/* set Talert to generate ACPI event */
+	byte = pm_ioread(0x3c);
+	byte &= 0xf3;
+	pm_iowrite(0x3c, byte);
+
+	/* THERMTRIP pin */
+	/* byte = pm_ioread(0x68);
+	 * byte |= 1 << 3;
+	 * pm_iowrite(0x68, byte);
+	 *
+	 * byte = pm_ioread(0x55);
+	 * byte |= 1 << 0;
+	 * pm_iowrite(0x55, byte);
+	 *
+	 * byte = pm_ioread(0x67);
+	 * byte &= ~( 1 << 6);
+	 * pm_iowrite(0x67, byte);
+	 */
+}
+
+/*************************************************
+* enable the dedicated function in tim5690 board.
+* This function called early than rs690_enable.
+*************************************************/
+void tim5690_enable(device_t dev)
+{
+	struct mainboard_config *mainboard =
+	    (struct mainboard_config *)dev->chip_info;
+
+	printk_info("Mainboard tim5690 Enable. dev=0x%p\n", dev);
+
+#if (CONFIG_GFXUMA == 1)
+	msr_t msr, msr2;
+
+	/* TOP_MEM: the top of DRAM below 4G */
+	msr = rdmsr(TOP_MEM);
+	printk_info("%s, TOP MEM: msr.lo = 0x%08x, msr.hi = 0x%08x\n",
+		    __func__, msr.lo, msr.hi);
+
+	/* TOP_MEM2: the top of DRAM above 4G */
+	msr2 = rdmsr(TOP_MEM2);
+	printk_info("%s, TOP MEM2: msr2.lo = 0x%08x, msr2.hi = 0x%08x\n",
+		    __func__, msr2.lo, msr2.hi);
+
+	switch (msr.lo) {
+	case 0x10000000:	/* 256M system memory */
+		uma_memory_size = 0x2000000;	/* 32M recommended UMA */
+		break;
+
+	case 0x18000000:	/* 384M system memory */
+		uma_memory_size = 0x4000000;	/* 64M recommended UMA */
+		break;
+
+	case 0x20000000:	/* 512M system memory */
+		uma_memory_size = 0x4000000;	/* 64M recommended UMA */
+		break;
+
+	default:		/* 1GB and above system memory */
+		uma_memory_size = 0x8000000;	/* 128M recommended UMA */
+		break;
+	}
+
+	uma_memory_base = msr.lo - uma_memory_size;	/* TOP_MEM1 */
+	printk_info("%s: uma size 0x%08llx, memory start 0x%08llx\n",
+		    __func__, uma_memory_size, uma_memory_base);
+
+	/* TODO: TOP_MEM2 */
+#else
+	uma_memory_size = 0x8000000;	/* 128M recommended UMA */
+	uma_memory_base = 0x38000000;	/* 1GB  system memory supposed */
+#endif
+
+	enable_onboard_nic();
+	set_thermal_config();
+}
+
+int add_mainboard_resources(struct lb_memory *mem)
+{
+	/* UMA is removed from system memory in the northbridge code, but
+	 * in some circumstances we want the memory mentioned as reserved.
+ 	 */
+#if (CONFIG_GFXUMA == 1)
+	printk_info("uma_memory_base=0x%llx, uma_memory_size=0x%llx \n",
+	uma_memory_base, uma_memory_size);
+	lb_add_memory_range(mem, LB_MEM_RESERVED,
+		uma_memory_base, uma_memory_size);
+#endif
+}
+
+struct chip_operations mainboard_ops = {
+	CHIP_NAME("TechNexion TIM-5690   Mainboard")
+	.enable_dev = tim5690_enable,
+};
Index: src/mainboard/technexion/tim5690/cmos.layout
===================================================================
--- src/mainboard/technexion/tim5690/cmos.layout	(revision 0)
+++ src/mainboard/technexion/tim5690/cmos.layout	(revision 0)
@@ -0,0 +1,119 @@
+##
+## This file is part of the coreboot project.
+##
+## Copyright (C) 2008 Advanced Micro Devices, Inc.
+##
+## This program is free software; you can redistribute it and/or modify
+## it under the terms of the GNU General Public License as published by
+## the Free Software Foundation; version 2 of the License.
+##
+## This program is distributed in the hope that it will be useful,
+## but WITHOUT ANY WARRANTY; without even the implied warranty of
+## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+## GNU General Public License for more details.
+##
+## You should have received a copy of the GNU General Public License
+## along with this program; if not, write to the Free Software
+## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301 USA
+##
+##
+##
+
+entries
+
+#start-bit length  config config-ID    name
+#0            8       r       0        seconds
+#8            8       r       0        alarm_seconds
+#16           8       r       0        minutes
+#24           8       r       0        alarm_minutes
+#32           8       r       0        hours
+#40           8       r       0        alarm_hours
+#48           8       r       0        day_of_week
+#56           8       r       0        day_of_month
+#64           8       r       0        month
+#72           8       r       0        year
+#80           4       r       0        rate_select
+#84           3       r       0        REF_Clock
+#87           1       r       0        UIP
+#88           1       r       0        auto_switch_DST
+#89           1       r       0        24_hour_mode
+#90           1       r       0        binary_values_enable
+#91           1       r       0        square-wave_out_enable
+#92           1       r       0        update_finished_enable
+#93           1       r       0        alarm_interrupt_enable
+#94           1       r       0        periodic_interrupt_enable
+#95           1       r       0        disable_clock_updates
+#96         288       r       0        temporary_filler
+0          384       r       0        reserved_memory
+384          1       e       4        boot_option
+385          1       e       4        last_boot
+386          1       e       1        ECC_memory
+388          4       r       0        reboot_bits
+392          3       e       5        baud_rate
+395          1       e       1        hw_scrubber
+396          1       e       1        interleave_chip_selects
+397          2       e       8        max_mem_clock
+399	     1	     e	     2	      dual_core
+400          1       e       1        power_on_after_fail
+412          4       e       6        debug_level
+416          4       e       7        boot_first
+420          4       e       7        boot_second
+424          4       e       7        boot_third
+428          4       h       0        boot_index
+432	     8       h       0        boot_countdown
+440          4       e       9        slow_cpu
+444          1       e       1        nmi
+445          1       e       1        iommu
+728        256       h       0        user_data
+984         16       h       0        check_sum
+# Reserve the extended AMD configuration registers
+1000        24       r       0        reserved_memory
+
+
+
+enumerations
+
+#ID value   text
+1     0     Disable
+1     1     Enable
+2     0     Enable
+2     1     Disable
+4     0     Fallback
+4     1     Normal
+5     0     115200
+5     1     57600
+5     2     38400
+5     3     19200
+5     4     9600
+5     5     4800
+5     6     2400
+5     7     1200
+6     6     Notice
+6     7     Info
+6     8     Debug
+6     9     Spew
+7     0     Network
+7     1     HDD
+7     2     Floppy
+7     8     Fallback_Network
+7     9     Fallback_HDD
+7     10    Fallback_Floppy
+#7     3     ROM
+8     0     DDR400
+8     1     DDR333
+8     2     DDR266
+8     3     DDR200
+9     0     off
+9     1     87.5%
+9     2     75.0%
+9     3     62.5%
+9     4     50.0%
+9     5     37.5%
+9     6     25.0%
+9     7     12.5%
+
+checksums
+
+checksum 392 983 984
+
+
Index: src/mainboard/technexion/tim5690/cache_as_ram_auto.c
===================================================================
--- src/mainboard/technexion/tim5690/cache_as_ram_auto.c	(revision 0)
+++ src/mainboard/technexion/tim5690/cache_as_ram_auto.c	(revision 0)
@@ -0,0 +1,243 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2008 Advanced Micro Devices, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301 USA
+ */
+
+#define ASSEMBLY 1
+#define __ROMCC__
+
+#define RAMINIT_SYSINFO 1
+#define K8_SET_FIDVID 1
+#define QRANK_DIMM_SUPPORT 1
+#if CONFIG_LOGICAL_CPUS==1
+#define SET_NB_CFG_54 1
+#endif
+
+#define RC0 (6<<8)
+#define RC1 (7<<8)
+
+#define DIMM0 0x50
+#define DIMM1 0x51
+
+#define ICS951462_ADDRESS	0x69
+#define SMBUS_HUB 0x71
+
+#include <stdint.h>
+#include <string.h>
+#include <device/pci_def.h>
+#include <arch/io.h>
+#include <device/pnp_def.h>
+#include <arch/romcc_io.h>
+#include <cpu/x86/lapic.h>
+#include "option_table.h"
+#include "pc80/mc146818rtc_early.c"
+#include "pc80/serial.c"
+#include "arch/i386/lib/console.c"
+
+#define post_code(x) outb(x, 0x80)
+
+#include <cpu/amd/model_fxx_rev.h>
+#include "northbridge/amd/amdk8/raminit.h"
+#include "cpu/amd/model_fxx/apic_timer.c"
+#include "lib/delay.c"
+
+#include "cpu/x86/lapic/boot_cpu.c"
+#include "northbridge/amd/amdk8/reset_test.c"
+#include "northbridge/amd/amdk8/debug.c"
+#include "superio/ite/it8712f/it8712f_early_serial.c"
+
+#include "cpu/amd/mtrr/amd_earlymtrr.c"
+#include "cpu/x86/bist.h"
+
+#include "northbridge/amd/amdk8/setup_resource_map.c"
+
+#include "southbridge/amd/rs690/rs690_early_setup.c"
+#include "southbridge/amd/sb600/sb600_early_setup.c"
+
+/* CAN'T BE REMOVED! crt0.S will use it. I don't know WHY!*/
+static void memreset(int controllers, const struct mem_controller *ctrl)
+{
+}
+
+/* called in raminit_f.c */
+static inline void activate_spd_rom(const struct mem_controller *ctrl)
+{
+}
+
+/*called in raminit_f.c */
+static inline int spd_read_byte(u32 device, u32 address)
+{
+	return smbus_read_byte(device, address);
+}
+
+#include "northbridge/amd/amdk8/amdk8.h"
+#include "northbridge/amd/amdk8/incoherent_ht.c"
+#include "northbridge/amd/amdk8/raminit_f.c"
+#include "northbridge/amd/amdk8/coherent_ht.c"
+#include "lib/generic_sdram.c"
+#include "resourcemap.c"
+
+#include "cpu/amd/dualcore/dualcore.c"
+
+#include "cpu/amd/car/copy_and_run.c"
+#include "cpu/amd/car/post_cache_as_ram.c"
+
+#include "cpu/amd/model_fxx/init_cpus.c"
+
+#include "cpu/amd/model_fxx/fidvid.c"
+
+#if CONFIG_USE_FALLBACK_IMAGE == 1
+
+#include "northbridge/amd/amdk8/early_ht.c"
+
+void failover_process(unsigned long bist, unsigned long cpu_init_detectedx)
+{
+	/* Is this a cpu only reset? Is this a secondary cpu? */
+	if ((cpu_init_detectedx) || (!boot_cpu())) {
+		if (last_boot_normal()) {	/* RTC already inited */
+			goto normal_image;
+		} else {
+			goto fallback_image;
+		}
+	}
+	/* Nothing special needs to be done to find bus 0 */
+	/* Allow the HT devices to be found */
+	enumerate_ht_chain();
+
+	/* sb600_lpc_port80(); */
+	sb600_pci_port80();
+
+	/* Is this a deliberate reset by the bios */
+	if (bios_reset_detected() && last_boot_normal()) {
+		goto normal_image;
+	}
+	/* This is the primary cpu how should I boot? */
+	else if (do_normal_boot()) {
+		goto normal_image;
+	} else {
+		goto fallback_image;
+	}
+normal_image:
+	post_code(0x23);
+	__asm__ volatile ("jmp __normal_image":	/* outputs */
+			  :"a" (bist), "b"(cpu_init_detectedx)	/* inputs */);
+
+fallback_image:
+	post_code(0x25);
+}
+#endif				/* CONFIG_USE_FALLBACK_IMAGE == 1 */
+
+void real_main(unsigned long bist, unsigned long cpu_init_detectedx);
+
+void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx)
+{
+
+#if CONFIG_USE_FALLBACK_IMAGE == 1
+	failover_process(bist, cpu_init_detectedx);
+#endif
+	real_main(bist, cpu_init_detectedx);
+}
+
+void real_main(unsigned long bist, unsigned long cpu_init_detectedx)
+{
+	static const u16 spd_addr[] = { DIMM0, 0, 0, 0, DIMM1, 0, 0, 0, };
+	int needs_reset = 0;
+	u32 bsp_apicid = 0;
+	msr_t msr;
+	struct cpuid_result cpuid1;
+	struct sys_info *sysinfo = (struct sys_info *)(CONFIG_DCACHE_RAM_BASE + CONFIG_DCACHE_RAM_SIZE - CONFIG_DCACHE_RAM_GLOBAL_VAR_SIZE);
+
+
+	if (bist == 0) {
+		bsp_apicid = init_cpus(cpu_init_detectedx, sysinfo);
+	}
+
+	enable_rs690_dev8();
+	sb600_lpc_init();
+
+	/* it8712f_enable_serial does not use its 1st parameter. */
+	it8712f_enable_serial(0, CONFIG_TTYS0_BASE);
+	it8712f_kill_watchdog();
+	uart_init();
+	console_init();
+
+	/* Halt if there was a built in self test failure */
+	report_bist_failure(bist);
+	printk_debug("bsp_apicid=0x%x\n", bsp_apicid);
+
+	setup_tim5690_resource_map();
+
+	setup_coherent_ht_domain();
+
+#if CONFIG_LOGICAL_CPUS==1
+	/* It is said that we should start core1 after all core0 launched */
+	wait_all_core0_started();
+	start_other_cores();
+#endif
+	wait_all_aps_started(bsp_apicid);
+
+	ht_setup_chains_x(sysinfo);
+
+	/* run _early_setup before soft-reset. */
+	rs690_early_setup();
+	sb600_early_setup();
+
+	/* Check to see if processor is capable of changing FIDVID  */
+	/* otherwise it will throw a GP# when reading FIDVID_STATUS */
+	cpuid1 = cpuid(0x80000007);
+	if( (cpuid1.edx & 0x6) == 0x6 ) {
+
+		/* Read FIDVID_STATUS */
+		msr=rdmsr(0xc0010042);
+		printk_debug("begin msr fid, vid: hi=0x%x, lo=0x%x\n", msr.hi, msr.lo);
+
+		enable_fid_change();
+		enable_fid_change_on_sb(sysinfo->sbbusn, sysinfo->sbdn);
+		init_fidvid_bsp(bsp_apicid);
+
+		/* show final fid and vid */
+		msr=rdmsr(0xc0010042);
+		printk_debug("end msr fid, vid: hi=0x%x, lo=0x%x\n", msr.hi, msr.lo);
+
+	} else {
+		printk_debug("Changing FIDVID not supported\n");
+	}
+
+	needs_reset = optimize_link_coherent_ht();
+	needs_reset |= optimize_link_incoherent_ht(sysinfo);
+	rs690_htinit();
+	printk_debug("needs_reset=0x%x\n", needs_reset);
+
+
+	if (needs_reset) {
+		print_info("ht reset -\r\n");
+		soft_reset();
+	}
+
+	allow_all_aps_stop(bsp_apicid);
+
+	/* It's the time to set ctrl now; */
+	printk_debug("sysinfo->nodes: %2x  sysinfo->ctrl: %2x  spd_addr: %2x\n",
+		     sysinfo->nodes, sysinfo->ctrl, spd_addr);
+	fill_mem_ctrl(sysinfo->nodes, sysinfo->ctrl, spd_addr);
+	sdram_initialize(sysinfo->nodes, sysinfo->ctrl, sysinfo);
+
+	rs690_before_pci_init();
+	sb600_before_pci_init();
+
+	post_cache_as_ram();
+}
Index: src/mainboard/technexion/tim5690/get_bus_conf.c
===================================================================
--- src/mainboard/technexion/tim5690/get_bus_conf.c	(revision 0)
+++ src/mainboard/technexion/tim5690/get_bus_conf.c	(revision 0)
@@ -0,0 +1,137 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2008 Advanced Micro Devices, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301 USA
+ */
+
+#include <console/console.h>
+#include <device/pci.h>
+#include <device/pci_ids.h>
+#include <string.h>
+#include <stdint.h>
+#include <stdlib.h>
+#if CONFIG_LOGICAL_CPUS==1
+#include <cpu/amd/dualcore.h>
+#endif
+
+#include <cpu/amd/amdk8_sysconf.h>
+
+/* Global variables for MB layouts and these will be shared by irqtable mptable
+* and acpi_tables busnum is default.
+*/
+u8 bus_isa;
+u8 bus_rs690[8];
+u8 bus_sb600[2];
+u32 apicid_sb600;
+
+/*
+* Here you only need to set value in pci1234 for HT-IO that could be installed or not
+* You may need to preset pci1234 for HTIO board,
+* please refer to src/northbridge/amd/amdk8/get_sblk_pci1234.c for detail
+*/
+u32 pci1234x[] = {
+	0x0000ff0,
+};
+
+/*
+* HT Chain device num, actually it is unit id base of every ht device in chain,
+* assume every chain only have 4 ht device at most
+*/
+u32 hcdnx[] = {
+	0x20202020,
+};
+
+u32 bus_type[256];
+
+u32 sbdn_rs690;
+u32 sbdn_sb600;
+
+extern void get_sblk_pci1234(void);
+
+static u32 get_bus_conf_done = 0;
+
+void get_bus_conf(void)
+{
+	u32 apicid_base;
+	device_t dev;
+	int i, j;
+
+	if (get_bus_conf_done == 1)
+		return;		/* do it only once */
+	get_bus_conf_done = 1;
+
+	sysconf.hc_possible_num = ARRAY_SIZE(pci1234x);
+	for (i = 0; i < sysconf.hc_possible_num; i++) {
+		sysconf.pci1234[i] = pci1234x[i];
+		sysconf.hcdn[i] = hcdnx[i];
+	}
+
+	get_sblk_pci1234();
+
+	sysconf.sbdn = (sysconf.hcdn[0] & 0xff);
+	sbdn_rs690 = sysconf.sbdn;
+	sbdn_sb600 = 0;
+
+	for (i = 0; i < 2; i++) {
+		bus_sb600[i] = 0;
+	}
+	for (i = 0; i < 8; i++) {
+		bus_rs690[i] = 0;
+	}
+
+	for (i = 0; i < 256; i++) {
+		bus_type[i] = 0; /* default ISA bus. */
+	}
+
+	bus_type[0] = 1;	/* pci */
+
+	bus_rs690[0] = (sysconf.pci1234[0] >> 16) & 0xff;
+	bus_sb600[0] = bus_rs690[0];
+
+	bus_type[bus_rs690[0]] = 1;
+
+	/* sb600 */
+	dev = dev_find_slot(bus_sb600[0], PCI_DEVFN(sbdn_sb600 + 0x14, 4));
+	if (dev) {
+		bus_sb600[1] = pci_read_config8(dev, PCI_SECONDARY_BUS);
+		bus_isa = pci_read_config8(dev, PCI_SUBORDINATE_BUS);
+		bus_isa++;
+		for (j = bus_sb600[1]; j < bus_isa; j++)
+			bus_type[j] = 1;
+	}
+
+	/* rs690 */
+	for (i = 1; i < 8; i++) {
+		dev = dev_find_slot(bus_rs690[0], PCI_DEVFN(sbdn_rs690 + i, 0));
+		if (dev) {
+			bus_rs690[i] = pci_read_config8(dev, PCI_SECONDARY_BUS);
+			if(255 != bus_rs690[i]) {
+				bus_isa = pci_read_config8(dev, PCI_SUBORDINATE_BUS);
+				bus_isa++;
+				bus_type[bus_rs690[i]] = 1; /* PCI bus. */
+			}
+		}
+	}
+
+	/* I/O APICs:   APIC ID Version State   Address */
+	bus_isa = 10;
+#if CONFIG_LOGICAL_CPUS==1
+	apicid_base = get_apicid_base(1);
+#else
+	apicid_base = CONFIG_MAX_PHYSICAL_CPUS;
+#endif
+	apicid_sb600 = apicid_base + 0;
+}
Index: targets/technexion/tim5690/Config-abuild.lb
===================================================================
--- targets/technexion/tim5690/Config-abuild.lb	(revision 0)
+++ targets/technexion/tim5690/Config-abuild.lb	(revision 0)
@@ -0,0 +1,26 @@
+# This will make a target directory of ./VENDOR_MAINBOARD
+
+target VENDOR_MAINBOARD
+mainboard VENDOR/MAINBOARD
+
+option CC="CROSSCC"
+option CONFIG_CROSS_COMPILE="CROSS_PREFIX"
+option HOSTCC="CROSS_HOSTCC"
+
+__COMPRESSION__
+__LOGLEVEL__
+
+romimage "normal"
+	option CONFIG_USE_FALLBACK_IMAGE=0
+	option CONFIG_ROM_IMAGE_SIZE=0x20000
+	option COREBOOT_EXTRA_VERSION=".0-normal"
+	payload __PAYLOAD__
+end
+
+romimage "fallback" 
+	option CONFIG_USE_FALLBACK_IMAGE=1
+	option CONFIG_ROM_IMAGE_SIZE=0x20000
+	option COREBOOT_EXTRA_VERSION=".0-fallback"
+	payload __PAYLOAD__
+end
+buildrom ./coreboot.rom CONFIG_ROM_SIZE "normal" "fallback"
Index: targets/technexion/tim5690/Config.lb
===================================================================
--- targets/technexion/tim5690/Config.lb	(revision 0)
+++ targets/technexion/tim5690/Config.lb	(revision 0)
@@ -0,0 +1,34 @@
+# This will make a target directory of ./tim5690
+
+target tim5690
+mainboard technexion/tim5690
+
+option CONFIG_ROM_SIZE = (1024*512)
+#option CONFIG_ROM_SIZE = (1024*1024*1)
+#option CONFIG_ROM_SIZE = (1024*1024*2)
+#option CONFIG_ROM_SIZE = (1024*1024*4)
+
+option CONFIG_COMPRESSED_PAYLOAD_LZMA=1
+#option CONFIG_PRECOMPRESSED_PAYLOAD=1
+
+
+romimage "normal"
+#	option CONFIG_ROM_SIZE = 1024*512 - 55808
+	option CONFIG_USE_FALLBACK_IMAGE=0
+	option CONFIG_ROM_IMAGE_SIZE=0x20000
+	option CONFIG_XIP_ROM_SIZE=0x20000
+
+	payload ../payload.elf
+end
+
+romimage "fallback" 
+#	option CONFIG_FALLBACK_SIZE= 1024*512 - 55808
+	option CONFIG_USE_FALLBACK_IMAGE=1
+	option CONFIG_ROM_IMAGE_SIZE=0x20000
+	option CONFIG_XIP_ROM_SIZE=0x20000
+
+	payload ../payload.elf
+end
+
+buildrom ./coreboot.rom CONFIG_ROM_SIZE "fallback" 
+
