<br><br><div class="gmail_quote">On Tue, Oct 20, 2009 at 1:31 PM, Hugh Greenberg <span dir="ltr"><<a href="mailto:hng@lanl.gov">hng@lanl.gov</a>></span> wrote:<br><blockquote class="gmail_quote" style="border-left: 1px solid rgb(204, 204, 204); margin: 0pt 0pt 0pt 0.8ex; padding-left: 1ex;">
I have been power cycling since you pointed it out last time.</blockquote><div>So have you been editing the logs (removing the first bit before the HT reset)?<br><br>pos=0x8a, unfiltered freq_cap=0x8075<br>
pos=0x8a, filtered freq_cap=0x35<br>
pos=0xce, unfiltered freq_cap=0x35<br>
freq_cap1=0x35, freq_cap2=0x15<br>
dev1 old_freq=0x4, freq=0x4, needs_reset=0x0<br>
dev2 old_freq=0x4, freq=0x4, needs_reset=0x0<br><br>This is link 0, and it says it is already running at the maximum frequency, so it doesn't need a reset.  A cold boot should start at 200MHz and always need a reset.  Here's an example from SimNOW:<br>
<br>dev1 old_freq=0x0, freq=0x4, needs_reset=0x1<br>dev2 old_freq=0x0, freq=0x4, needs_reset=0x1<br><br>If you haven't been editing the logs, then maybe there's something wrong with the early serial port initialization.  That would be good to know.<br>
<br>Thanks,<br>Myles<br>
</div></div>