Index: src/cpu/intel/model_106cx/cache_as_ram_disable.c
===================================================================
--- src/cpu/intel/model_106cx/cache_as_ram_disable.c	(revision 5256)
+++ src/cpu/intel/model_106cx/cache_as_ram_disable.c	(working copy)
@@ -25,30 +25,6 @@
 {
 	unsigned int cpu_reset = 0;
 
-#if !defined(CONFIG_TINY_BOOTBLOCK) || !CONFIG_TINY_BOOTBLOCK
-#if CONFIG_USE_FALLBACK_IMAGE == 1
-        /* Is this a deliberate reset by the bios */
-        if (bios_reset_detected() && last_boot_normal()) {
-                goto normal_image;
-        } else {
-        	/* This is the primary cpu how should I boot? */
-		check_cmos_failed();
-		if (do_normal_boot()) {
-        	        goto normal_image;
-	        }
-        	else {
-	                goto fallback_image;
-        	}
-	}
- normal_image:
-        __asm__ volatile ("jmp __normal_image"
-                : /* outputs */
-                : "a" (bist) /* inputs */
-                );
- fallback_image:
-#endif
-#endif
-
 	real_main(bist);
 
 	/* No servicable parts below this line .. */
Index: src/cpu/intel/model_6ex/cache_as_ram_disable.c
===================================================================
--- src/cpu/intel/model_6ex/cache_as_ram_disable.c	(revision 5256)
+++ src/cpu/intel/model_6ex/cache_as_ram_disable.c	(working copy)
@@ -27,30 +27,6 @@
 {
 	unsigned int cpu_reset = 0;
 
-#if !defined(CONFIG_TINY_BOOTBLOCK) || !CONFIG_TINY_BOOTBLOCK
-#if CONFIG_USE_FALLBACK_IMAGE == 1
-        /* Is this a deliberate reset by the bios */
-        if (bios_reset_detected() && last_boot_normal()) {
-                goto normal_image;
-        } else {
-        	/* This is the primary cpu how should I boot? */
-		check_cmos_failed();
-		if (do_normal_boot()) {
-        	        goto normal_image;
-	        }
-        	else {
-	                goto fallback_image;
-        	}
-	}
- normal_image:
-        __asm__ volatile ("jmp __normal_image"
-                : /* outputs */
-                : "a" (bist) /* inputs */
-                );
- fallback_image:
-#endif
-#endif
-
 	real_main(bist);
 
 	/* No servicable parts below this line .. */
Index: src/cpu/intel/model_6fx/cache_as_ram_disable.c
===================================================================
--- src/cpu/intel/model_6fx/cache_as_ram_disable.c	(revision 5256)
+++ src/cpu/intel/model_6fx/cache_as_ram_disable.c	(working copy)
@@ -27,30 +27,6 @@
 {
 	unsigned int cpu_reset = 0;
 
-#if !defined(CONFIG_TINY_BOOTBLOCK) || !CONFIG_TINY_BOOTBLOCK
-#if CONFIG_USE_FALLBACK_IMAGE == 1
-        /* Is this a deliberate reset by the bios */
-        if (bios_reset_detected() && last_boot_normal()) {
-                goto normal_image;
-        } else {
-        	/* This is the primary cpu how should I boot? */
-		check_cmos_failed();
-		if (do_normal_boot()) {
-        	        goto normal_image;
-	        }
-        	else {
-	                goto fallback_image;
-        	}
-	}
- normal_image:
-        __asm__ volatile ("jmp __normal_image"
-                : /* outputs */
-                : "a" (bist) /* inputs */
-                );
- fallback_image:
-#endif
-#endif
-
 	real_main(bist);
 
 	/* No servicable parts below this line .. */
Index: src/mainboard/broadcom/blast/romstage.c
===================================================================
--- src/mainboard/broadcom/blast/romstage.c	(revision 5256)
+++ src/mainboard/broadcom/blast/romstage.c	(working copy)
@@ -106,74 +106,10 @@
 
 #include "cpu/amd/model_fxx/init_cpus.c"
 
-
-#if CONFIG_USE_FALLBACK_IMAGE == 1
-
 #include "northbridge/amd/amdk8/early_ht.c"
 
-void failover_process(unsigned long bist, unsigned long cpu_init_detectedx)
-{
-
-
-        /* Is this a cpu only reset? Is this a secondary cpu? */
-        if ((cpu_init_detectedx) || (!boot_cpu())) {  
-                if (last_boot_normal()) { // RTC already inited
-                        goto normal_image;
-                } else {
-                        goto fallback_image;
-                }
-        }
-        /* Nothing special needs to be done to find bus 0 */
-        /* Allow the HT devices to be found */
-
-        enumerate_ht_chain();
-
-        bcm5785_enable_rom();
-
-        bcm5785_enable_lpc();
-
-        //enable RTC
-        pc87417_enable_dev(RTC_DEV);
-
-        /* Is this a deliberate reset by the bios */
-//        post_code(0x22);
-        if (bios_reset_detected() && last_boot_normal()) {
-                goto normal_image;
-        }
-        /* This is the primary cpu how should I boot? */
-        else if (do_normal_boot()) {
-                goto normal_image;
-        }
-        else {
-                goto fallback_image;
-        }
- normal_image:
-//        post_code(0x23);
-        __asm__ volatile ("jmp __normal_image"
-                : /* outputs */
-                : "a" (bist), "b" (cpu_init_detectedx) /* inputs */
-                );
-
- fallback_image:
-//        post_code(0x25);
-	;
-}
-#endif /* CONFIG_USE_FALLBACK_IMAGE == 1 */
-
-void real_main(unsigned long bist, unsigned long cpu_init_detectedx);
-
 void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx)
 {
-
-#if CONFIG_USE_FALLBACK_IMAGE == 1
-        failover_process(bist, cpu_init_detectedx);
-#endif
-        real_main(bist, cpu_init_detectedx);
-
-}
-
-void real_main(unsigned long bist, unsigned long cpu_init_detectedx)
-{
 	static const uint16_t spd_addr[] = {
         	RC0|DIMM0, RC0|DIMM2, 0, 0,
                 RC0|DIMM1, RC0|DIMM3, 0, 0,
@@ -189,6 +125,20 @@
         struct mem_controller ctrl[8];
         unsigned nodes;
 
+        if (!((cpu_init_detectedx) || (!boot_cpu()))) {  
+		/* Nothing special needs to be done to find bus 0 */
+		/* Allow the HT devices to be found */
+
+		enumerate_ht_chain();
+
+		bcm5785_enable_rom();
+
+		bcm5785_enable_lpc();
+
+		//enable RTC
+		pc87417_enable_dev(RTC_DEV);
+        }
+
         if (bist == 0) {
 		bsp_apicid = init_cpus(cpu_init_detectedx);
         }
Index: src/mainboard/supermicro/x6dai_g/failover.c
===================================================================
--- src/mainboard/supermicro/x6dai_g/failover.c	(revision 5256)
+++ src/mainboard/supermicro/x6dai_g/failover.c	(working copy)
@@ -14,34 +14,5 @@
 
 static unsigned long main(unsigned long bist)
 {
-	/* Did just the cpu reset? */
-	if (memory_initialized()) {
-	 	if (last_boot_normal()) {
-			goto normal_image;
-		} else {
-			goto cpu_reset;
-		}
-	}
-
-	/* This is the primary cpu how should I boot? */
-	else if (do_normal_boot()) {
-		goto normal_image;
-	}
-	else {
-		goto fallback_image;
-	}
- normal_image:
-	asm volatile ("jmp __normal_image" 
-		: /* outputs */ 
-		: "a" (bist) /* inputs */
-		: /* clobbers */
-		);
- cpu_reset:
-	asm volatile ("jmp __cpu_reset"
-		: /* outputs */ 
-		: "a"(bist) /* inputs */
-		: /* clobbers */
-		);
- fallback_image:
 	return bist;
 }
Index: src/mainboard/supermicro/x6dhe_g/failover.c
===================================================================
--- src/mainboard/supermicro/x6dhe_g/failover.c	(revision 5256)
+++ src/mainboard/supermicro/x6dhe_g/failover.c	(working copy)
@@ -14,34 +14,5 @@
 
 static unsigned long main(unsigned long bist)
 {
-	/* Did just the cpu reset? */
-	if (memory_initialized()) {
-	 	if (last_boot_normal()) {
-			goto normal_image;
-		} else {
-			goto cpu_reset;
-		}
-	}
-
-	/* This is the primary cpu how should I boot? */
-	else if (do_normal_boot()) {
-		goto normal_image;
-	}
-	else {
-		goto fallback_image;
-	}
- normal_image:
-	asm volatile ("jmp __normal_image" 
-		: /* outputs */ 
-		: "a" (bist) /* inputs */
-		: /* clobbers */
-		);
- cpu_reset:
-	asm volatile ("jmp __cpu_reset"
-		: /* outputs */ 
-		: "a"(bist) /* inputs */
-		: /* clobbers */
-		);
- fallback_image:
 	return bist;
 }
Index: src/mainboard/supermicro/x6dhe_g2/failover.c
===================================================================
--- src/mainboard/supermicro/x6dhe_g2/failover.c	(revision 5256)
+++ src/mainboard/supermicro/x6dhe_g2/failover.c	(working copy)
@@ -14,34 +14,5 @@
 
 static unsigned long main(unsigned long bist)
 {
-	/* Did just the cpu reset? */
-	if (memory_initialized()) {
-	 	if (last_boot_normal()) {
-			goto normal_image;
-		} else {
-			goto cpu_reset;
-		}
-	}
-
-	/* This is the primary cpu how should I boot? */
-	else if (do_normal_boot()) {
-		goto normal_image;
-	}
-	else {
-		goto fallback_image;
-	}
- normal_image:
-	asm volatile ("jmp __normal_image" 
-		: /* outputs */ 
-		: "a" (bist) /* inputs */
-		: /* clobbers */
-		);
- cpu_reset:
-	asm volatile ("jmp __cpu_reset"
-		: /* outputs */ 
-		: "a"(bist) /* inputs */
-		: /* clobbers */
-		);
- fallback_image:
 	return bist;
 }
Index: src/mainboard/supermicro/x6dhr_ig/failover.c
===================================================================
--- src/mainboard/supermicro/x6dhr_ig/failover.c	(revision 5256)
+++ src/mainboard/supermicro/x6dhr_ig/failover.c	(working copy)
@@ -14,34 +14,5 @@
 
 static unsigned long main(unsigned long bist)
 {
-	/* Did just the cpu reset? */
-	if (memory_initialized()) {
-	 	if (last_boot_normal()) {
-			goto normal_image;
-		} else {
-			goto cpu_reset;
-		}
-	}
-
-	/* This is the primary cpu how should I boot? */
-	else if (do_normal_boot()) {
-		goto normal_image;
-	}
-	else {
-		goto fallback_image;
-	}
- normal_image:
-	asm volatile ("jmp __normal_image" 
-		: /* outputs */ 
-		: "a" (bist) /* inputs */
-		: /* clobbers */
-		);
- cpu_reset:
-	asm volatile ("jmp __cpu_reset"
-		: /* outputs */ 
-		: "a"(bist) /* inputs */
-		: /* clobbers */
-		);
- fallback_image:
 	return bist;
 }
Index: src/mainboard/supermicro/x6dhr_ig2/failover.c
===================================================================
--- src/mainboard/supermicro/x6dhr_ig2/failover.c	(revision 5256)
+++ src/mainboard/supermicro/x6dhr_ig2/failover.c	(working copy)
@@ -14,34 +14,5 @@
 
 static unsigned long main(unsigned long bist)
 {
-	/* Did just the cpu reset? */
-	if (memory_initialized()) {
-	 	if (last_boot_normal()) {
-			goto normal_image;
-		} else {
-			goto cpu_reset;
-		}
-	}
-
-	/* This is the primary cpu how should I boot? */
-	else if (do_normal_boot()) {
-		goto normal_image;
-	}
-	else {
-		goto fallback_image;
-	}
- normal_image:
-	asm volatile ("jmp __normal_image" 
-		: /* outputs */ 
-		: "a" (bist) /* inputs */
-		: /* clobbers */
-		);
- cpu_reset:
-	asm volatile ("jmp __cpu_reset"
-		: /* outputs */ 
-		: "a"(bist) /* inputs */
-		: /* clobbers */
-		);
- fallback_image:
 	return bist;
 }
Index: src/mainboard/kontron/kt690/romstage.c
===================================================================
--- src/mainboard/kontron/kt690/romstage.c	(revision 5256)
+++ src/mainboard/kontron/kt690/romstage.c	(working copy)
@@ -101,60 +101,10 @@
 
 #include "cpu/amd/model_fxx/fidvid.c"
 
-#if CONFIG_USE_FALLBACK_IMAGE == 1
-
 #include "northbridge/amd/amdk8/early_ht.c"
 
-void failover_process(unsigned long bist, unsigned long cpu_init_detectedx)
-{
-	/* Is this a cpu only reset? Is this a secondary cpu? */
-	if ((cpu_init_detectedx) || (!boot_cpu())) {
-		if (last_boot_normal()) {	/* RTC already inited */
-			goto normal_image;
-		} else {
-			goto fallback_image;
-		}
-	}
-	/* Nothing special needs to be done to find bus 0 */
-	/* Allow the HT devices to be found */
-	enumerate_ht_chain();
-
-	/* sb600_lpc_port80(); */
-	sb600_pci_port80();
-
-	/* Is this a deliberate reset by the bios */
-	if (bios_reset_detected() && last_boot_normal()) {
-		goto normal_image;
-	}
-	/* This is the primary cpu how should I boot? */
-	else if (do_normal_boot()) {
-		goto normal_image;
-	} else {
-		goto fallback_image;
-	}
-normal_image:
-	post_code(0x23);
-	__asm__ volatile ("jmp __normal_image":	/* outputs */
-			  :"a" (bist), "b"(cpu_init_detectedx)	/* inputs */);
-
-fallback_image:
-	post_code(0x25);
-}
-#endif				/* CONFIG_USE_FALLBACK_IMAGE == 1 */
-
-void real_main(unsigned long bist, unsigned long cpu_init_detectedx);
-
 void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx)
 {
-
-#if CONFIG_USE_FALLBACK_IMAGE == 1
-	failover_process(bist, cpu_init_detectedx);
-#endif
-	real_main(bist, cpu_init_detectedx);
-}
-
-void real_main(unsigned long bist, unsigned long cpu_init_detectedx)
-{
 	device_t dev;
 	static const u16 spd_addr[] = { DIMM0, 0, 0, 0, DIMM1, 0, 0, 0, };
 	int needs_reset = 0;
@@ -163,7 +113,15 @@
 	struct cpuid_result cpuid1;
 	struct sys_info *sysinfo = (struct sys_info *)(CONFIG_DCACHE_RAM_BASE + CONFIG_DCACHE_RAM_SIZE - CONFIG_DCACHE_RAM_GLOBAL_VAR_SIZE);
 
+	if (!((cpu_init_detectedx) || (!boot_cpu()))) {
+		/* Nothing special needs to be done to find bus 0 */
+		/* Allow the HT devices to be found */
+		enumerate_ht_chain();
 
+		/* sb600_lpc_port80(); */
+		sb600_pci_port80();
+	}
+
 	if (bist == 0) {
 		bsp_apicid = init_cpus(cpu_init_detectedx, sysinfo);
 	}
Index: src/mainboard/emulation/qemu-x86/failover.c
===================================================================
--- src/mainboard/emulation/qemu-x86/failover.c	(revision 5256)
+++ src/mainboard/emulation/qemu-x86/failover.c	(working copy)
@@ -10,20 +10,5 @@
 
 static void main(void)
 {
-#if 0
-	/* Is this a cpu reset? */
-	if (cpu_init_detected()) {
-		if (last_boot_normal()) {
-			asm("jmp __normal_image");
-		} else {
-			asm("jmp __cpu_reset");
-		}
-	}
-
-	/* This is the primary cpu how should I boot? */
-	else if (do_normal_boot()) {
-		asm("jmp __normal_image");
-	}
-#endif
 }
 
Index: src/mainboard/olpc/btest/failover.c
===================================================================
--- src/mainboard/olpc/btest/failover.c	(revision 5256)
+++ src/mainboard/olpc/btest/failover.c	(working copy)
@@ -9,27 +9,5 @@
 
 static unsigned long main(unsigned long bist)
 {
-#if 0
-	/* This is the primary cpu how should I boot? */
-	if (do_normal_boot()) {
-		goto normal_image;
-	}
-	else {
-		goto fallback_image;
-	}
- normal_image:
-	asm volatile ("jmp __normal_image" 
-		: /* outputs */ 
-		: "a" (bist) /* inputs */
-		: /* clobbers */
-		);
- cpu_reset:
-	asm volatile ("jmp __cpu_reset"
-		: /* outputs */ 
-		: "a"(bist) /* inputs */
-		: /* clobbers */
-		);
- fallback_image:
-#endif
 	return bist;
 }
Index: src/mainboard/olpc/rev_a/failover.c
===================================================================
--- src/mainboard/olpc/rev_a/failover.c	(revision 5256)
+++ src/mainboard/olpc/rev_a/failover.c	(working copy)
@@ -9,27 +9,5 @@
 
 static unsigned long main(unsigned long bist)
 {
-#if 0
-	/* This is the primary cpu how should I boot? */
-	if (do_normal_boot()) {
-		goto normal_image;
-	}
-	else {
-		goto fallback_image;
-	}
- normal_image:
-	asm volatile ("jmp __normal_image" 
-		: /* outputs */ 
-		: "a" (bist) /* inputs */
-		: /* clobbers */
-		);
- cpu_reset:
-	asm volatile ("jmp __cpu_reset"
-		: /* outputs */ 
-		: "a"(bist) /* inputs */
-		: /* clobbers */
-		);
- fallback_image:
-#endif
 	return bist;
 }
Index: src/mainboard/amd/pistachio/romstage.c
===================================================================
--- src/mainboard/amd/pistachio/romstage.c	(revision 5256)
+++ src/mainboard/amd/pistachio/romstage.c	(working copy)
@@ -94,60 +94,10 @@
 
 #include "cpu/amd/model_fxx/fidvid.c"
 
-#if CONFIG_USE_FALLBACK_IMAGE == 1
-
 #include "northbridge/amd/amdk8/early_ht.c"
 
-void failover_process(unsigned long bist, unsigned long cpu_init_detectedx)
-{
-	/* Is this a cpu only reset? Is this a secondary cpu? */
-	if ((cpu_init_detectedx) || (!boot_cpu())) {
-		if (last_boot_normal()) {	/* RTC already inited */
-			goto normal_image;
-		} else {
-			goto fallback_image;
-		}
-	}
-	/* Nothing special needs to be done to find bus 0 */
-	/* Allow the HT devices to be found */
-	enumerate_ht_chain();
-
-	sb600_lpc_port80();
-	/* sb600_pci_port80(); */
-
-	/* Is this a deliberate reset by the bios */
-	if (bios_reset_detected() && last_boot_normal()) {
-		goto normal_image;
-	}
-	/* This is the primary cpu how should I boot? */
-	else if (do_normal_boot()) {
-		goto normal_image;
-	} else {
-		goto fallback_image;
-	}
-      normal_image:
-	post_code(0x01);
-	__asm__ volatile ("jmp __normal_image":	/* outputs */
-			  :"a" (bist), "b"(cpu_init_detectedx));	/* inputs */
-
-      fallback_image:
-	post_code(0x02);
-}
-#endif				/* CONFIG_USE_FALLBACK_IMAGE == 1 */
-
-void real_main(unsigned long bist, unsigned long cpu_init_detectedx);
-
 void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx)
 {
-
-#if CONFIG_USE_FALLBACK_IMAGE == 1
-	failover_process(bist, cpu_init_detectedx);
-#endif
-	real_main(bist, cpu_init_detectedx);
-}
-
-void real_main(unsigned long bist, unsigned long cpu_init_detectedx)
-{
 	static const u16 spd_addr[] = { DIMM0, 0, 0, 0, DIMM1, 0, 0, 0, };
 	int needs_reset = 0;
 	u32 bsp_apicid = 0;
@@ -157,6 +107,15 @@
 	    (struct sys_info *)(CONFIG_DCACHE_RAM_BASE + CONFIG_DCACHE_RAM_SIZE -
 				CONFIG_DCACHE_RAM_GLOBAL_VAR_SIZE);
 
+	if (!((cpu_init_detectedx) || (!boot_cpu()))) {
+		/* Nothing special needs to be done to find bus 0 */
+		/* Allow the HT devices to be found */
+		enumerate_ht_chain();
+
+		sb600_lpc_port80();
+		/* sb600_pci_port80(); */
+	}
+
 	if (bist == 0) {
 		bsp_apicid = init_cpus(cpu_init_detectedx, sysinfo);
 	}
Index: src/mainboard/amd/mahogany/cache_as_ram_auto.c
===================================================================
--- src/mainboard/amd/mahogany/cache_as_ram_auto.c	(revision 5256)
+++ src/mainboard/amd/mahogany/cache_as_ram_auto.c	(working copy)
@@ -1,239 +0,0 @@
-/*
- * This file is part of the coreboot project.
- *
- * Copyright (C) 2010 Advanced Micro Devices, Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; version 2 of the License.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301 USA
- */
-
-#define ASSEMBLY 1
-#define __PRE_RAM__
-
-#define RAMINIT_SYSINFO 1
-#define K8_SET_FIDVID 1
-#define QRANK_DIMM_SUPPORT 1
-#if CONFIG_LOGICAL_CPUS==1
-#define SET_NB_CFG_54 1
-#endif
-
-#define RC0 (6<<8)
-#define RC1 (7<<8)
-
-#define DIMM0 0x50
-#define DIMM1 0x51
-
-#define ICS951462_ADDRESS	0x69
-#define SMBUS_HUB 0x71
-
-#include <stdint.h>
-#include <string.h>
-#include <device/pci_def.h>
-#include <arch/io.h>
-#include <device/pnp_def.h>
-#include <arch/romcc_io.h>
-#include <cpu/x86/lapic.h>
-#include "option_table.h"
-#include "pc80/mc146818rtc_early.c"
-#include "pc80/serial.c"
-#include "arch/i386/lib/console.c"
-
-#define post_code(x) outb(x, 0x80)
-
-#include <cpu/amd/model_fxx_rev.h>
-#include "northbridge/amd/amdk8/raminit.h"
-#include "cpu/amd/model_fxx/apic_timer.c"
-#include "lib/delay.c"
-
-#include "cpu/x86/lapic/boot_cpu.c"
-#include "northbridge/amd/amdk8/reset_test.c"
-#include "northbridge/amd/amdk8/debug.c"
-#include "superio/ite/it8718f/it8718f_early_serial.c"
-
-#include "cpu/amd/mtrr/amd_earlymtrr.c"
-#include "cpu/x86/bist.h"
-
-#include "northbridge/amd/amdk8/setup_resource_map.c"
-
-#include "southbridge/amd/rs780/rs780_early_setup.c"
-#include "southbridge/amd/sb700/sb700_early_setup.c"
-
-/* CAN'T BE REMOVED! crt0.S will use it. I don't know WHY!*/
-static void memreset(int controllers, const struct mem_controller *ctrl)
-{
-}
-
-/* called in raminit_f.c */
-static inline void activate_spd_rom(const struct mem_controller *ctrl)
-{
-}
-
-/*called in raminit_f.c */
-static inline int spd_read_byte(u32 device, u32 address)
-{
-	return smbus_read_byte(device, address);
-}
-
-#include "northbridge/amd/amdk8/amdk8.h"
-#include "northbridge/amd/amdk8/incoherent_ht.c"
-#include "northbridge/amd/amdk8/raminit_f.c"
-#include "northbridge/amd/amdk8/coherent_ht.c"
-#include "lib/generic_sdram.c"
-#include "resourcemap.c"
-
-#include "cpu/amd/dualcore/dualcore.c"
-
-#include "cpu/amd/car/copy_and_run.c"
-#include "cpu/amd/car/post_cache_as_ram.c"
-
-#include "cpu/amd/model_fxx/init_cpus.c"
-
-#include "cpu/amd/model_fxx/fidvid.c"
-
-#if CONFIG_USE_FALLBACK_IMAGE == 1
-
-#include "northbridge/amd/amdk8/early_ht.c"
-
-void failover_process(unsigned long bist, unsigned long cpu_init_detectedx)
-{
-	/* Is this a cpu only reset? Is this a secondary cpu? */
-	if ((cpu_init_detectedx) || (!boot_cpu())) {
-		if (last_boot_normal()) {	/* RTC already inited */
-			goto normal_image;
-		} else {
-			goto fallback_image;
-		}
-	}
-	/* Nothing special needs to be done to find bus 0 */
-	/* Allow the HT devices to be found */
-	enumerate_ht_chain();
-
-	/* sb700_lpc_port80(); */
-	sb700_pci_port80();
-
-	/* Is this a deliberate reset by the bios */
-	if (bios_reset_detected() && last_boot_normal()) {
-		goto normal_image;
-	}
-	/* This is the primary cpu how should I boot? */
-	else if (do_normal_boot()) {
-		goto normal_image;
-	} else {
-		goto fallback_image;
-	}
-normal_image:
-	post_code(0x23);
-	__asm__ volatile ("jmp __normal_image":	/* outputs */
-			  :"a" (bist), "b"(cpu_init_detectedx)	/* inputs */);
-
-fallback_image:
-	post_code(0x25);
-}
-#endif				/* CONFIG_USE_FALLBACK_IMAGE == 1 */
-
-void real_main(unsigned long bist, unsigned long cpu_init_detectedx);
-
-void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx)
-{
-
-#if CONFIG_USE_FALLBACK_IMAGE == 1
-	failover_process(bist, cpu_init_detectedx);
-#endif
-	real_main(bist, cpu_init_detectedx);
-}
-
-void real_main(unsigned long bist, unsigned long cpu_init_detectedx)
-{
-	static const u16 spd_addr[] = { DIMM0, 0, 0, 0, DIMM1, 0, 0, 0, };
-	int needs_reset = 0;
-	u32 bsp_apicid = 0;
-	msr_t msr;
-	struct cpuid_result cpuid1;
-	struct sys_info *sysinfo = (struct sys_info *)(CONFIG_DCACHE_RAM_BASE + CONFIG_DCACHE_RAM_SIZE - CONFIG_DCACHE_RAM_GLOBAL_VAR_SIZE);
-
-	if (bist == 0) {
-		bsp_apicid = init_cpus(cpu_init_detectedx, sysinfo);
-	}
-
-	enable_rs780_dev8();
-	sb700_lpc_init();
-
-	it8718f_enable_serial(0, CONFIG_TTYS0_BASE);
-	uart_init();
-	console_init();
-
-	/* Halt if there was a built in self test failure */
-	report_bist_failure(bist);
-	printk_debug("bsp_apicid=0x%x\n", bsp_apicid);
-
-	setup_mahogany_resource_map();
-
-	setup_coherent_ht_domain();
-
-#if CONFIG_LOGICAL_CPUS==1
-	/* It is said that we should start core1 after all core0 launched */
-	wait_all_core0_started();
-	start_other_cores();
-#endif
-	wait_all_aps_started(bsp_apicid);
-
-	ht_setup_chains_x(sysinfo);
-
-	/* run _early_setup before soft-reset. */
-	rs780_early_setup();
-	sb700_early_setup();
-
-/* Check to see if processor is capable of changing FIDVID  */
-	/* otherwise it will throw a GP# when reading FIDVID_STATUS */
-	cpuid1 = cpuid(0x80000007);
-	if( (cpuid1.edx & 0x6) == 0x6 ) {
-
-		/* Read FIDVID_STATUS */
-		msr=rdmsr(0xc0010042);
-		printk_debug("begin msr fid, vid: hi=0x%x, lo=0x%x\n", msr.hi, msr.lo);
-
-		enable_fid_change();
-		enable_fid_change_on_sb(sysinfo->sbbusn, sysinfo->sbdn);
-		init_fidvid_bsp(bsp_apicid);
-
-		/* show final fid and vid */
-		msr=rdmsr(0xc0010042);
-		printk_debug("end msr fid, vid: hi=0x%x, lo=0x%x\n", msr.hi, msr.lo);
-
-	} else {
-		printk_debug("Changing FIDVID not supported\n");
-	}
-
-	needs_reset = optimize_link_coherent_ht();
-	needs_reset |= optimize_link_incoherent_ht(sysinfo);
-	rs780_htinit();
-	printk_debug("needs_reset=0x%x\n", needs_reset);
-
-	if (needs_reset) {
-		print_info("ht reset -\r\n");
-		soft_reset();
-	}
-
-	allow_all_aps_stop(bsp_apicid);
-
-	/* It's the time to set ctrl now; */
-	printk_debug("sysinfo->nodes: %2x  sysinfo->ctrl: %2x  spd_addr: %2x\n",
-		     sysinfo->nodes, sysinfo->ctrl, spd_addr);
-	fill_mem_ctrl(sysinfo->nodes, sysinfo->ctrl, spd_addr);
-	sdram_initialize(sysinfo->nodes, sysinfo->ctrl, sysinfo);
-
-	rs780_before_pci_init();
-	sb700_before_pci_init();
-
-	post_cache_as_ram();
-}
Index: src/mainboard/amd/mahogany/romstage.c
===================================================================
--- src/mainboard/amd/mahogany/romstage.c	(revision 5256)
+++ src/mainboard/amd/mahogany/romstage.c	(working copy)
@@ -100,60 +100,10 @@
 
 #include "cpu/amd/model_fxx/fidvid.c"
 
-#if CONFIG_USE_FALLBACK_IMAGE == 1
-
 #include "northbridge/amd/amdk8/early_ht.c"
 
-void failover_process(unsigned long bist, unsigned long cpu_init_detectedx)
-{
-	/* Is this a cpu only reset? Is this a secondary cpu? */
-	if ((cpu_init_detectedx) || (!boot_cpu())) {
-		if (last_boot_normal()) {	/* RTC already inited */
-			goto normal_image;
-		} else {
-			goto fallback_image;
-		}
-	}
-	/* Nothing special needs to be done to find bus 0 */
-	/* Allow the HT devices to be found */
-	enumerate_ht_chain();
-
-	/* sb700_lpc_port80(); */
-	sb700_pci_port80();
-
-	/* Is this a deliberate reset by the bios */
-	if (bios_reset_detected() && last_boot_normal()) {
-		goto normal_image;
-	}
-	/* This is the primary cpu how should I boot? */
-	else if (do_normal_boot()) {
-		goto normal_image;
-	} else {
-		goto fallback_image;
-	}
-normal_image:
-	post_code(0x23);
-	__asm__ volatile ("jmp __normal_image":	/* outputs */
-			  :"a" (bist), "b"(cpu_init_detectedx)	/* inputs */);
-
-fallback_image:
-	post_code(0x25);
-}
-#endif				/* CONFIG_USE_FALLBACK_IMAGE == 1 */
-
-void real_main(unsigned long bist, unsigned long cpu_init_detectedx);
-
 void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx)
 {
-
-#if CONFIG_USE_FALLBACK_IMAGE == 1
-	failover_process(bist, cpu_init_detectedx);
-#endif
-	real_main(bist, cpu_init_detectedx);
-}
-
-void real_main(unsigned long bist, unsigned long cpu_init_detectedx)
-{
 	static const u16 spd_addr[] = { DIMM0, 0, 0, 0, DIMM1, 0, 0, 0, };
 	int needs_reset = 0;
 	u32 bsp_apicid = 0;
@@ -161,6 +111,15 @@
 	struct cpuid_result cpuid1;
 	struct sys_info *sysinfo = (struct sys_info *)(CONFIG_DCACHE_RAM_BASE + CONFIG_DCACHE_RAM_SIZE - CONFIG_DCACHE_RAM_GLOBAL_VAR_SIZE);
 
+	if (!((cpu_init_detectedx) || (!boot_cpu()))) {
+		/* Nothing special needs to be done to find bus 0 */
+		/* Allow the HT devices to be found */
+		enumerate_ht_chain();
+
+		/* sb700_lpc_port80(); */
+		sb700_pci_port80();
+	}
+
 	if (bist == 0) {
 		bsp_apicid = init_cpus(cpu_init_detectedx, sysinfo);
 	}
Index: src/mainboard/amd/dbm690t/romstage.c
===================================================================
--- src/mainboard/amd/dbm690t/romstage.c	(revision 5256)
+++ src/mainboard/amd/dbm690t/romstage.c	(working copy)
@@ -100,60 +100,10 @@
 
 #include "cpu/amd/model_fxx/fidvid.c"
 
-#if CONFIG_USE_FALLBACK_IMAGE == 1
-
 #include "northbridge/amd/amdk8/early_ht.c"
 
-void failover_process(unsigned long bist, unsigned long cpu_init_detectedx)
-{
-	/* Is this a cpu only reset? Is this a secondary cpu? */
-	if ((cpu_init_detectedx) || (!boot_cpu())) {
-		if (last_boot_normal()) {	/* RTC already inited */
-			goto normal_image;
-		} else {
-			goto fallback_image;
-		}
-	}
-	/* Nothing special needs to be done to find bus 0 */
-	/* Allow the HT devices to be found */
-	enumerate_ht_chain();
-
-	/* sb600_lpc_port80(); */
-	sb600_pci_port80();
-
-	/* Is this a deliberate reset by the bios */
-	if (bios_reset_detected() && last_boot_normal()) {
-		goto normal_image;
-	}
-	/* This is the primary cpu how should I boot? */
-	else if (do_normal_boot()) {
-		goto normal_image;
-	} else {
-		goto fallback_image;
-	}
-normal_image:
-	post_code(0x23);
-	__asm__ volatile ("jmp __normal_image":	/* outputs */
-			  :"a" (bist), "b"(cpu_init_detectedx)	/* inputs */);
-
-fallback_image:
-	post_code(0x25);
-}
-#endif				/* CONFIG_USE_FALLBACK_IMAGE == 1 */
-
-void real_main(unsigned long bist, unsigned long cpu_init_detectedx);
-
 void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx)
 {
-
-#if CONFIG_USE_FALLBACK_IMAGE == 1
-	failover_process(bist, cpu_init_detectedx);
-#endif
-	real_main(bist, cpu_init_detectedx);
-}
-
-void real_main(unsigned long bist, unsigned long cpu_init_detectedx)
-{
 	static const u16 spd_addr[] = { DIMM0, 0, 0, 0, DIMM1, 0, 0, 0, };
 	int needs_reset = 0;
 	u32 bsp_apicid = 0;
@@ -161,7 +111,15 @@
 	struct cpuid_result cpuid1;
 	struct sys_info *sysinfo = (struct sys_info *)(CONFIG_DCACHE_RAM_BASE + CONFIG_DCACHE_RAM_SIZE - CONFIG_DCACHE_RAM_GLOBAL_VAR_SIZE);
 
+	if (!((cpu_init_detectedx) || (!boot_cpu()))) {
+		/* Nothing special needs to be done to find bus 0 */
+		/* Allow the HT devices to be found */
+		enumerate_ht_chain();
 
+		/* sb600_lpc_port80(); */
+		sb600_pci_port80();
+	}
+
 	if (bist == 0) {
 		bsp_apicid = init_cpus(cpu_init_detectedx, sysinfo);
 	}
Index: src/mainboard/tyan/s2850/romstage.c
===================================================================
--- src/mainboard/tyan/s2850/romstage.c	(revision 5256)
+++ src/mainboard/tyan/s2850/romstage.c	(working copy)
@@ -93,72 +93,11 @@
 
 #include "cpu/amd/model_fxx/init_cpus.c"
 
-
-#if CONFIG_USE_FALLBACK_IMAGE == 1
-
 #include "southbridge/amd/amd8111/amd8111_enable_rom.c"
 #include "northbridge/amd/amdk8/early_ht.c"
 
-void failover_process(unsigned long bist, unsigned long cpu_init_detectedx)
-{
-        unsigned last_boot_normal_x = last_boot_normal();
-
-        /* Is this a cpu only reset? or Is this a secondary cpu? */
-        if ((cpu_init_detectedx) || (!boot_cpu())) {
-                if (last_boot_normal_x) {
-                        goto normal_image;
-                } else {
-                        goto fallback_image;
-                }
-        }
-
-        /* Nothing special needs to be done to find bus 0 */
-        /* Allow the HT devices to be found */
-
-        enumerate_ht_chain();
-
-        /* Setup the amd8111 */
-        amd8111_enable_rom();
-
-        /* Is this a deliberate reset by the bios */
-//        post_code(0x22);
-        if (bios_reset_detected() && last_boot_normal_x) {
-                goto normal_image;
-        }
-        /* This is the primary cpu how should I boot? */
-        else if (do_normal_boot()) {
-                goto normal_image;
-        }
-        else {
-                goto fallback_image;
-        }
- normal_image:
-//        post_code(0x23);
-        __asm__ volatile ("jmp __normal_image"
-                : /* outputs */
-                : "a" (bist), "b" (cpu_init_detectedx) /* inputs */
-                );
-
- fallback_image:
-//        post_code(0x25);
-	;
-}
-#endif
-
-void real_main(unsigned long bist, unsigned long cpu_init_detectedx);
-
 void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx)
 {
-
-#if CONFIG_USE_FALLBACK_IMAGE == 1
-        failover_process(bist, cpu_init_detectedx);
-#endif
-        real_main(bist, cpu_init_detectedx);
-
-}
-
-void real_main(unsigned long bist, unsigned long cpu_init_detectedx)
-{
 	static const struct mem_controller cpu[] = {
 		{
 			.node_id = 0,
@@ -173,6 +112,16 @@
 
         int needs_reset;
 
+        if (!((cpu_init_detectedx) || (!boot_cpu()))) {
+		/* Nothing special needs to be done to find bus 0 */
+		/* Allow the HT devices to be found */
+
+		enumerate_ht_chain();
+
+		/* Setup the amd8111 */
+		amd8111_enable_rom();
+        }
+
         if (bist == 0) {
 		init_cpus(cpu_init_detectedx);
         }
Index: src/mainboard/tyan/s2735/romstage.c
===================================================================
--- src/mainboard/tyan/s2735/romstage.c	(revision 5256)
+++ src/mainboard/tyan/s2735/romstage.c	(working copy)
@@ -80,54 +80,8 @@
 
 #include "cpu/x86/car/copy_and_run.c"
 
-#if CONFIG_USE_FALLBACK_IMAGE == 1
-
-#include "southbridge/intel/i82801ex/cmos_failover.c"
-
-void real_main(unsigned long bist);
-
 void amd64_main(unsigned long bist)
 {
-        /* Is this a deliberate reset by the bios */
-//        post_code(0x22);
-        if (bios_reset_detected() && last_boot_normal()) {
-                goto normal_image;
-        }
-        /* This is the primary cpu how should I boot? */
-        else {
-		check_cmos_failed();
-		if (do_normal_boot()) {
-        	        goto normal_image;
-	        }
-        	else {
-	                goto fallback_image;
-        	}
-	}
- normal_image:
-//        post_code(0x23);
-        __asm__ volatile ("jmp __normal_image"
-                : /* outputs */
-                : "a" (bist) /* inputs */
-                );
- cpu_reset:
-//        post_code(0x24);
-#if 0
-        //CPU reset will reset memtroller ???
-        asm volatile ("jmp __cpu_reset" 
-                : /* outputs */ 
-                : "a"(bist) /* inputs */
-                );
-#endif
-
- fallback_image:
-//        post_code(0x25);
-        real_main(bist);
-}
-void real_main(unsigned long bist)
-#else
-void amd64_main(unsigned long bist)
-#endif
-{
 	static const struct mem_controller memctrl[] = {
                 {
                         .d0 = PCI_DEV(0, 0, 0),
Index: src/mainboard/tyan/s2880/romstage.c
===================================================================
--- src/mainboard/tyan/s2880/romstage.c	(revision 5256)
+++ src/mainboard/tyan/s2880/romstage.c	(working copy)
@@ -85,68 +85,11 @@
 
 #include "cpu/amd/model_fxx/init_cpus.c"
 
-
-#if CONFIG_USE_FALLBACK_IMAGE == 1
-
 #include "southbridge/amd/amd8111/amd8111_enable_rom.c"
 #include "northbridge/amd/amdk8/early_ht.c"
 
-void failover_process(unsigned long bist, unsigned long cpu_init_detectedx)
-{
-        unsigned last_boot_normal_x = last_boot_normal();
-
-        /* Is this a cpu only reset? or Is this a secondary cpu? */
-        if ((cpu_init_detectedx) || (!boot_cpu())) {
-                if (last_boot_normal_x) {
-                        goto normal_image;
-                } else {
-                        goto fallback_image;
-                }
-        }
-
-        /* Nothing special needs to be done to find bus 0 */
-        /* Allow the HT devices to be found */
-
-        enumerate_ht_chain();
-
-        amd8111_enable_rom();
-
-        /* Is this a deliberate reset by the bios */
-        if (bios_reset_detected() && last_boot_normal_x) {
-                goto normal_image;
-        }
-        /* This is the primary cpu how should I boot? */
-        else if (do_normal_boot()) {
-                goto normal_image;
-        }
-        else {
-                goto fallback_image;
-        }
- normal_image:
-        __asm__ volatile ("jmp __normal_image"
-                : /* outputs */
-                : "a" (bist), "b" (cpu_init_detectedx) /* inputs */
-                );
-
- fallback_image:
-	;
-}
-#endif
-
-void real_main(unsigned long bist, unsigned long cpu_init_detectedx);
-
 void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx)
 {
-
-#if CONFIG_USE_FALLBACK_IMAGE == 1
-        failover_process(bist, cpu_init_detectedx);
-#endif
-        real_main(bist, cpu_init_detectedx);
-
-}
-
-void real_main(unsigned long bist, unsigned long cpu_init_detectedx)
-{
 	static const struct mem_controller cpu[] = {
 		{
 			.node_id = 0,
@@ -172,6 +115,15 @@
 
         int needs_reset;
 
+        if (!((cpu_init_detectedx) || (!boot_cpu()))) {
+		/* Nothing special needs to be done to find bus 0 */
+		/* Allow the HT devices to be found */
+
+		enumerate_ht_chain();
+
+		amd8111_enable_rom();
+        }
+
         if (bist == 0) {
 		init_cpus(cpu_init_detectedx);
         }
Index: src/mainboard/tyan/s2881/romstage.c
===================================================================
--- src/mainboard/tyan/s2881/romstage.c	(revision 5256)
+++ src/mainboard/tyan/s2881/romstage.c	(working copy)
@@ -98,72 +98,11 @@
 
 #include "cpu/amd/model_fxx/init_cpus.c"
 
-
-#if CONFIG_USE_FALLBACK_IMAGE == 1
-
 #include "southbridge/amd/amd8111/amd8111_enable_rom.c"
 #include "northbridge/amd/amdk8/early_ht.c"
 
-void failover_process(unsigned long bist, unsigned long cpu_init_detectedx)
-{
-        unsigned last_boot_normal_x = last_boot_normal();
-
-        /* Is this a cpu only reset? or Is this a secondary cpu? */
-        if ((cpu_init_detectedx) || (!boot_cpu())) {
-                if (last_boot_normal_x) {
-                        goto normal_image;
-                } else {
-                        goto fallback_image;
-                }
-        }
-
-        /* Nothing special needs to be done to find bus 0 */
-        /* Allow the HT devices to be found */
-
-        enumerate_ht_chain();
-
-        /* Setup the amd8111 */
-        amd8111_enable_rom();
-
-        /* Is this a deliberate reset by the bios */
-//        post_code(0x22);
-        if (bios_reset_detected() && last_boot_normal_x) {
-                goto normal_image;
-        }
-        /* This is the primary cpu how should I boot? */
-        else if (do_normal_boot()) {
-                goto normal_image;
-        }
-        else {
-                goto fallback_image;
-        }
- normal_image:
-//        post_code(0x23);
-        __asm__ volatile ("jmp __normal_image"
-                : /* outputs */
-                : "a" (bist), "b" (cpu_init_detectedx) /* inputs */
-                );
-
- fallback_image:
-//        post_code(0x25);
-	;
-}
-#endif
-
-void real_main(unsigned long bist, unsigned long cpu_init_detectedx);
-
 void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx)
 {
-
-#if CONFIG_USE_FALLBACK_IMAGE == 1
-        failover_process(bist, cpu_init_detectedx);
-#endif
-        real_main(bist, cpu_init_detectedx);
-
-}
-
-void real_main(unsigned long bist, unsigned long cpu_init_detectedx)
-{
 	static const uint16_t spd_addr [] = {
 			(0xa<<3)|0, (0xa<<3)|2, 0, 0,
 			(0xa<<3)|1, (0xa<<3)|3, 0, 0,
@@ -179,6 +118,16 @@
         struct mem_controller ctrl[8];
         unsigned nodes;
 
+        if (!((cpu_init_detectedx) || (!boot_cpu()))) {
+		/* Nothing special needs to be done to find bus 0 */
+		/* Allow the HT devices to be found */
+
+		enumerate_ht_chain();
+
+		/* Setup the amd8111 */
+		amd8111_enable_rom();
+        }
+
         if (bist == 0) {
                 bsp_apicid = init_cpus(cpu_init_detectedx);
         }
Index: src/mainboard/tyan/s4880/romstage.c
===================================================================
--- src/mainboard/tyan/s4880/romstage.c	(revision 5256)
+++ src/mainboard/tyan/s4880/romstage.c	(working copy)
@@ -111,68 +111,11 @@
 
 #include "cpu/amd/model_fxx/init_cpus.c"
 
-
-#if CONFIG_USE_FALLBACK_IMAGE == 1
-
 #include "southbridge/amd/amd8111/amd8111_enable_rom.c"
 #include "northbridge/amd/amdk8/early_ht.c"
 
-void failover_process(unsigned long bist, unsigned long cpu_init_detectedx)
-{
-        unsigned last_boot_normal_x = last_boot_normal();
-
-        /* Is this a cpu only reset? or Is this a secondary cpu? */
-        if ((cpu_init_detectedx) || (!boot_cpu())) {
-                if (last_boot_normal_x) {
-                        goto normal_image;
-                } else {
-                        goto fallback_image;
-                }
-        }
-
-        /* Nothing special needs to be done to find bus 0 */
-        /* Allow the HT devices to be found */
-
-        enumerate_ht_chain();
-
-        amd8111_enable_rom();
-
-        /* Is this a deliberate reset by the bios */
-        if (bios_reset_detected() && last_boot_normal_x) {
-                goto normal_image;
-        }
-        /* This is the primary cpu how should I boot? */
-        else if (do_normal_boot()) {
-                goto normal_image;
-        }
-        else {
-                goto fallback_image;
-        }
- normal_image:
-        __asm__ volatile ("jmp __normal_image"
-                : /* outputs */
-                : "a" (bist), "b" (cpu_init_detectedx) /* inputs */
-                );
-
- fallback_image:
-	;
-}
-#endif
-
-void real_main(unsigned long bist, unsigned long cpu_init_detectedx);
-
 void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx)
 {
-
-#if CONFIG_USE_FALLBACK_IMAGE == 1
-        failover_process(bist, cpu_init_detectedx);
-#endif
-        real_main(bist, cpu_init_detectedx);
-
-}
-
-void real_main(unsigned long bist, unsigned long cpu_init_detectedx)
-{
 	static const struct mem_controller cpu[] = {
                 {
                         .node_id = 0,
@@ -222,6 +165,15 @@
 
         int needs_reset;
 
+        if (!((cpu_init_detectedx) || (!boot_cpu()))) {
+		/* Nothing special needs to be done to find bus 0 */
+		/* Allow the HT devices to be found */
+
+		enumerate_ht_chain();
+
+		amd8111_enable_rom();
+        }
+
         if (bist == 0) {
 		init_cpus(cpu_init_detectedx);
         }
Index: src/mainboard/tyan/s2891/romstage.c
===================================================================
--- src/mainboard/tyan/s2891/romstage.c	(revision 5256)
+++ src/mainboard/tyan/s2891/romstage.c	(working copy)
@@ -77,8 +77,6 @@
 
 #include "cpu/amd/model_fxx/init_cpus.c"
 
-#if CONFIG_USE_FALLBACK_IMAGE == 1
-
 #include "southbridge/nvidia/ck804/ck804_enable_rom.c"
 #include "northbridge/amd/amdk8/early_ht.c"
 
@@ -112,68 +110,8 @@
 
 }
 
-void failover_process(unsigned long bist, unsigned long cpu_init_detectedx)
-{
-	unsigned last_boot_normal_x = last_boot_normal();
-
-	/* Is this a cpu only reset? or Is this a secondary cpu? */
-	if ((cpu_init_detectedx) || (!boot_cpu())) {
-	if (last_boot_normal_x) {
-	goto normal_image;
-	} else {
-	goto fallback_image;
-	}
-	}
-
-	/* Nothing special needs to be done to find bus 0 */
-	/* Allow the HT devices to be found */
-
-	enumerate_ht_chain();
-
-	sio_setup();
-
-	/* Setup the ck804 */
-	ck804_enable_rom();
-
-	/* Is this a deliberate reset by the bios */
-//	post_code(0x22);
-	if (bios_reset_detected() && last_boot_normal_x) {
-	goto normal_image;
-	}
-	/* This is the primary cpu how should I boot? */
-	else if (do_normal_boot()) {
-	goto normal_image;
-	}
-	else {
-	goto fallback_image;
-	}
- normal_image:
-//	post_code(0x23);
-	__asm__ volatile ("jmp __normal_image"
-	: /* outputs */
-	: "a" (bist), "b"(cpu_init_detectedx) /* inputs */
-	);
-
- fallback_image:
-//	post_code(0x25);
-	;
-}
-#endif
-
-void real_main(unsigned long bist, unsigned long cpu_init_detectedx);
-
 void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx)
 {
-
-#if CONFIG_USE_FALLBACK_IMAGE == 1
-		failover_process(bist, cpu_init_detectedx);
-#endif
-	real_main(bist, cpu_init_detectedx);
-
-}
-
-void real_main(unsigned long bist, unsigned long cpu_init_detectedx)
-{
 	static const uint16_t spd_addr [] = {
 		(0xa<<3)|0, (0xa<<3)|2, 0, 0,
 		(0xa<<3)|1, (0xa<<3)|3, 0, 0,
@@ -189,6 +127,18 @@
 	struct mem_controller ctrl[8];
 	unsigned nodes;
 
+	if (!((cpu_init_detectedx) || (!boot_cpu()))) {
+		/* Nothing special needs to be done to find bus 0 */
+		/* Allow the HT devices to be found */
+
+		enumerate_ht_chain();
+
+		sio_setup();
+
+		/* Setup the ck804 */
+		ck804_enable_rom();
+	}
+
 	if (bist == 0) {
 		bsp_apicid = init_cpus(cpu_init_detectedx);
 	}
Index: src/mainboard/tyan/s2882/romstage.c
===================================================================
--- src/mainboard/tyan/s2882/romstage.c	(revision 5256)
+++ src/mainboard/tyan/s2882/romstage.c	(working copy)
@@ -88,68 +88,11 @@
 
 #include "cpu/amd/model_fxx/init_cpus.c"
 
-
-#if CONFIG_USE_FALLBACK_IMAGE == 1
-
 #include "southbridge/amd/amd8111/amd8111_enable_rom.c"
 #include "northbridge/amd/amdk8/early_ht.c"
 
-void failover_process(unsigned long bist, unsigned long cpu_init_detectedx)
-{
-        unsigned last_boot_normal_x = last_boot_normal();
-
-        /* Is this a cpu only reset? or Is this a secondary cpu? */
-        if ((cpu_init_detectedx) || (!boot_cpu())) {
-                if (last_boot_normal_x) {
-                        goto normal_image;
-                } else {
-                        goto fallback_image;
-                }
-        }
-
-        /* Nothing special needs to be done to find bus 0 */
-        /* Allow the HT devices to be found */
-
-        enumerate_ht_chain();
-
-        amd8111_enable_rom();
-
-        /* Is this a deliberate reset by the bios */
-        if (bios_reset_detected() && last_boot_normal_x) {
-                goto normal_image;
-        }
-        /* This is the primary cpu how should I boot? */
-        else if (do_normal_boot()) {
-                goto normal_image;
-        }
-        else {
-                goto fallback_image;
-        }
- normal_image:
-        __asm__ volatile ("jmp __normal_image"
-                : /* outputs */
-                : "a" (bist) , "b" (cpu_init_detectedx) /* inputs */
-                );
-
- fallback_image:
-	;
-}
-#endif
-
-void real_main(unsigned long bist, unsigned long cpu_init_detectedx);
-
 void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx)
 {
-
-#if CONFIG_USE_FALLBACK_IMAGE == 1
-        failover_process(bist, cpu_init_detectedx);
-#endif
-        real_main(bist, cpu_init_detectedx);
-
-}
-
-void real_main(unsigned long bist, unsigned long cpu_init_detectedx)
-{
 	static const struct mem_controller cpu[] = {
 		{
 			.node_id = 0,
@@ -175,6 +118,15 @@
 
         int needs_reset;
 
+        if (!((cpu_init_detectedx) || (!boot_cpu()))) {
+		/* Nothing special needs to be done to find bus 0 */
+		/* Allow the HT devices to be found */
+
+		enumerate_ht_chain();
+
+		amd8111_enable_rom();
+        }
+
         if (bist == 0) {
 		init_cpus(cpu_init_detectedx);
         }
Index: src/mainboard/tyan/s2892/romstage.c
===================================================================
--- src/mainboard/tyan/s2892/romstage.c	(revision 5256)
+++ src/mainboard/tyan/s2892/romstage.c	(working copy)
@@ -82,8 +82,6 @@
 
 #include "cpu/amd/model_fxx/init_cpus.c"
 
-#if CONFIG_USE_FALLBACK_IMAGE == 1
-
 #include "southbridge/nvidia/ck804/ck804_enable_rom.c"
 #include "northbridge/amd/amdk8/early_ht.c"
 
@@ -101,66 +99,8 @@
 	pci_write_config32(PCI_DEV(0, CK804_DEVN_BASE+1 , 0), 0xa0, dword);
 }
 
-void failover_process(unsigned long bist, unsigned long cpu_init_detectedx)
-{
-	unsigned last_boot_normal_x = last_boot_normal();
-
-	/* Is this a cpu only reset? or Is this a secondary cpu? */
-	if ((cpu_init_detectedx) || (!boot_cpu())) {
-		if (last_boot_normal_x) {
-			goto normal_image;
-		} else {
-			goto fallback_image;
-		}
-	}
-
-	/* Nothing special needs to be done to find bus 0 */
-	/* Allow the HT devices to be found */
-
-	enumerate_ht_chain();
-
-	sio_setup();
-
-	/* Setup the ck804 */
-	ck804_enable_rom();
-
-	/* Is this a deliberate reset by the bios */
-//	post_code(0x22);
-	if (bios_reset_detected() && last_boot_normal_x) {
-		goto normal_image;
-	}
-	/* This is the primary cpu how should I boot? */
-	else if (do_normal_boot()) {
-		goto normal_image;
-	}
-	else {
-		goto fallback_image;
-	}
- normal_image:
-//	post_code(0x23);
-	__asm__ volatile ("jmp __normal_image"
-	: /* outputs */
-	: "a" (bist), "b"(cpu_init_detectedx) /* inputs */
-	);
-
- fallback_image:
-//	post_code(0x25);
-	;
-}
-#endif
-
-void real_main(unsigned long bist, unsigned long cpu_init_detectedx);
-
 void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx)
 {
-	#if CONFIG_USE_FALLBACK_IMAGE == 1
-	failover_process(bist, cpu_init_detectedx);
-	#endif
-	real_main(bist, cpu_init_detectedx);
-}
-
-void real_main(unsigned long bist, unsigned long cpu_init_detectedx)
-{
 	static const uint16_t spd_addr [] = {
 		(0xa<<3)|0, (0xa<<3)|2, 0, 0,
 		(0xa<<3)|1, (0xa<<3)|3, 0, 0,
@@ -176,6 +116,18 @@
 	struct mem_controller ctrl[8];
 	unsigned nodes;
 
+	if (!((cpu_init_detectedx) || (!boot_cpu()))) {
+		/* Nothing special needs to be done to find bus 0 */
+		/* Allow the HT devices to be found */
+
+		enumerate_ht_chain();
+
+		sio_setup();
+
+		/* Setup the ck804 */
+		ck804_enable_rom();
+	}
+
 	if (bist == 0) {
 		bsp_apicid = init_cpus(cpu_init_detectedx);
 	}
Index: src/mainboard/tyan/s4882/romstage.c
===================================================================
--- src/mainboard/tyan/s4882/romstage.c	(revision 5256)
+++ src/mainboard/tyan/s4882/romstage.c	(working copy)
@@ -119,67 +119,11 @@
 
 #include "cpu/amd/model_fxx/init_cpus.c"
 
-#if CONFIG_USE_FALLBACK_IMAGE == 1
-
 #include "southbridge/amd/amd8111/amd8111_enable_rom.c"
 #include "northbridge/amd/amdk8/early_ht.c"
 
-void failover_process(unsigned long bist, unsigned long cpu_init_detectedx)
-{
-        unsigned last_boot_normal_x = last_boot_normal();
-
-        /* Is this a cpu only reset? or Is this a secondary cpu? */
-        if ((cpu_init_detectedx) || (!boot_cpu())) {
-                if (last_boot_normal_x) {
-                        goto normal_image;
-                } else {
-                        goto fallback_image;
-                }
-        }
-
-        /* Nothing special needs to be done to find bus 0 */
-        /* Allow the HT devices to be found */
-
-        enumerate_ht_chain();
-
-        amd8111_enable_rom();
-
-        /* Is this a deliberate reset by the bios */
-        if (bios_reset_detected() && last_boot_normal_x) {
-                goto normal_image;
-        }
-        /* This is the primary cpu how should I boot? */
-        else if (do_normal_boot()) {
-                goto normal_image;
-        }
-        else {
-                goto fallback_image;
-        }
- normal_image:
-        __asm__ volatile ("jmp __normal_image"
-                : /* outputs */
-                : "a" (bist), "b" ( cpu_init_detectedx ) /* inputs */
-                );
-
- fallback_image:
-	;
-}
-#endif
-
-void real_main(unsigned long bist, unsigned long cpu_init_detectedx);
-
 void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx)
 {
-
-#if CONFIG_USE_FALLBACK_IMAGE == 1
-        failover_process(bist, cpu_init_detectedx);
-#endif
-        real_main(bist, cpu_init_detectedx);
-
-}
-
-void real_main(unsigned long bist, unsigned long cpu_init_detectedx)
-{
 	static const uint16_t spd_addr [] = {
                         RC0|DIMM0, RC0|DIMM2, 0, 0,
                         RC0|DIMM1, RC0|DIMM3, 0, 0,
@@ -201,6 +145,15 @@
         struct mem_controller ctrl[8];
         unsigned nodes;
 
+        if (!((cpu_init_detectedx) || (!boot_cpu()))) {
+		/* Nothing special needs to be done to find bus 0 */
+		/* Allow the HT devices to be found */
+
+		enumerate_ht_chain();
+
+		amd8111_enable_rom();
+        }
+
         if (bist == 0) {
                 bsp_apicid = init_cpus(cpu_init_detectedx);
         }
Index: src/mainboard/tyan/s2875/romstage.c
===================================================================
--- src/mainboard/tyan/s2875/romstage.c	(revision 5256)
+++ src/mainboard/tyan/s2875/romstage.c	(working copy)
@@ -84,69 +84,11 @@
 
 #include "cpu/amd/model_fxx/init_cpus.c"
 
-
-#if CONFIG_USE_FALLBACK_IMAGE == 1
-
 #include "southbridge/amd/amd8111/amd8111_enable_rom.c"
 #include "northbridge/amd/amdk8/early_ht.c"
 
-void failover_process(unsigned long bist, unsigned long cpu_init_detectedx)
-{
-
-        unsigned last_boot_normal_x = last_boot_normal();
-
-        /* Is this a cpu only reset? or Is this a secondary cpu? */
-        if ((cpu_init_detectedx) || (!boot_cpu())) {
-                if (last_boot_normal_x) {
-                        goto normal_image;
-                } else {
-                        goto fallback_image;
-                }
-        }
-
-        /* Nothing special needs to be done to find bus 0 */
-        /* Allow the HT devices to be found */
-
-        enumerate_ht_chain();
-
-        amd8111_enable_rom();
-
-        /* Is this a deliberate reset by the bios */
-        if (bios_reset_detected() && last_boot_normal_x) {
-                goto normal_image;
-        }
-        /* This is the primary cpu how should I boot? */
-        else if (do_normal_boot()) {
-                goto normal_image;
-        }
-        else {
-                goto fallback_image;
-        }
- normal_image:
-        __asm__ volatile ("jmp __normal_image"
-                : /* outputs */
-                : "a" (bist), "b" (cpu_init_detectedx)/* inputs */
-                );
-
- fallback_image:
-	;
-}
-#endif
-
-void real_main(unsigned long bist, unsigned long cpu_init_detectedx);
-
 void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx)
 {
-
-#if CONFIG_USE_FALLBACK_IMAGE == 1
-        failover_process(bist, cpu_init_detectedx);
-#endif
-        real_main(bist, cpu_init_detectedx);
-
-}
-
-void real_main(unsigned long bist, unsigned long cpu_init_detectedx)
-{
 	static const struct mem_controller cpu[] = {
 		{
 			.node_id = 0,
@@ -172,6 +114,15 @@
 
         int needs_reset;
 
+        if (!((cpu_init_detectedx) || (!boot_cpu()))) {
+		/* Nothing special needs to be done to find bus 0 */
+		/* Allow the HT devices to be found */
+
+		enumerate_ht_chain();
+
+		amd8111_enable_rom();
+        }
+
         if (bist == 0) {
 		init_cpus(cpu_init_detectedx);
         }
Index: src/mainboard/tyan/s2885/romstage.c
===================================================================
--- src/mainboard/tyan/s2885/romstage.c	(revision 5256)
+++ src/mainboard/tyan/s2885/romstage.c	(working copy)
@@ -98,72 +98,11 @@
 
 #include "cpu/amd/model_fxx/init_cpus.c"
 
-
-#if CONFIG_USE_FALLBACK_IMAGE == 1
-
 #include "southbridge/amd/amd8111/amd8111_enable_rom.c"
 #include "northbridge/amd/amdk8/early_ht.c"
 
-void failover_process(unsigned long bist, unsigned long cpu_init_detectedx)
-{
-        unsigned last_boot_normal_x = last_boot_normal();
-
-        /* Is this a cpu only reset? or Is this a secondary cpu? */
-        if ((cpu_init_detectedx) || (!boot_cpu())) {
-                if (last_boot_normal_x) {
-                        goto normal_image;
-                } else {
-                        goto fallback_image;
-                }
-        }
-
-        /* Nothing special needs to be done to find bus 0 */
-        /* Allow the HT devices to be found */
-
-        enumerate_ht_chain();
-
-        /* Setup the amd8111 */
-        amd8111_enable_rom();
-
-        /* Is this a deliberate reset by the bios */
-//        post_code(0x22);
-        if (bios_reset_detected() && last_boot_normal_x) {
-                goto normal_image;
-        }
-        /* This is the primary cpu how should I boot? */
-        else if (do_normal_boot()) {
-                goto normal_image;
-        }
-        else {
-                goto fallback_image;
-        }
- normal_image:
-//        post_code(0x23);
-        __asm__ volatile ("jmp __normal_image"
-                : /* outputs */
-                : "a" (bist), "b" (cpu_init_detectedx) /* inputs */
-                );
-
- fallback_image:
-//        post_code(0x25);
-	;
-}
-#endif
-
-void real_main(unsigned long bist, unsigned long cpu_init_detectedx);
-
 void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx)
 {
-
-#if CONFIG_USE_FALLBACK_IMAGE == 1
-        failover_process(bist, cpu_init_detectedx);
-#endif
-        real_main(bist, cpu_init_detectedx);
-
-}
-
-void real_main(unsigned long bist, unsigned long cpu_init_detectedx)
-{
 	static const uint16_t spd_addr [] = {
 			(0xa<<3)|0, (0xa<<3)|2, 0, 0,
 			(0xa<<3)|1, (0xa<<3)|3, 0, 0,
@@ -179,6 +118,16 @@
         struct mem_controller ctrl[8];
         unsigned nodes;
 
+        if (!((cpu_init_detectedx) || (!boot_cpu()))) {
+		/* Nothing special needs to be done to find bus 0 */
+		/* Allow the HT devices to be found */
+
+		enumerate_ht_chain();
+
+		/* Setup the amd8111 */
+		amd8111_enable_rom();
+        }
+
         if (bist == 0) {
                 bsp_apicid = init_cpus(cpu_init_detectedx);
         }
Index: src/mainboard/via/epia-m/failover.c
===================================================================
--- src/mainboard/via/epia-m/failover.c	(revision 5256)
+++ src/mainboard/via/epia-m/failover.c	(working copy)
@@ -9,27 +9,5 @@
 
 static unsigned long main(unsigned long bist)
 {
-#if 0
-	/* This is the primary cpu how should I boot? */
-	if (do_normal_boot()) {
-		goto normal_image;
-	}
-	else {
-		goto fallback_image;
-	}
- normal_image:
-	asm volatile ("jmp __normal_image" 
-		: /* outputs */ 
-		: "a" (bist) /* inputs */
-		: /* clobbers */
-		);
- cpu_reset:
-	asm volatile ("jmp __cpu_reset"
-		: /* outputs */ 
-		: "a"(bist) /* inputs */
-		: /* clobbers */
-		);
- fallback_image:
-#endif
 	return bist;
 }
Index: src/mainboard/via/epia-n/failover.c
===================================================================
--- src/mainboard/via/epia-n/failover.c	(revision 5256)
+++ src/mainboard/via/epia-n/failover.c	(working copy)
@@ -9,27 +9,5 @@
 
 static unsigned long main(unsigned long bist)
 {
-#if 0
-	/* This is the primary cpu how should I boot? */
-	if (do_normal_boot()) {
-		goto normal_image;
-	}
-	else {
-		goto fallback_image;
-	}
- normal_image:
-	asm volatile ("jmp __normal_image" 
-		: /* outputs */ 
-		: "a" (bist) /* inputs */
-		: /* clobbers */
-		);
- cpu_reset:
-	asm volatile ("jmp __cpu_reset"
-		: /* outputs */ 
-		: "a"(bist) /* inputs */
-		: /* clobbers */
-		);
- fallback_image:
-#endif
 	return bist;
 }
Index: src/mainboard/dell/s1850/failover.c
===================================================================
--- src/mainboard/dell/s1850/failover.c	(revision 5256)
+++ src/mainboard/dell/s1850/failover.c	(working copy)
@@ -15,35 +15,5 @@
 static unsigned long main(unsigned long bist)
 {
 	/* skip all this nonsense as we are not doing fallback yet */
-	goto fallback_image;
-	/* Did just the cpu reset? */
-	if (memory_initialized()) {
-	 	if (last_boot_normal()) {
-			goto normal_image;
-		} else {
-			goto cpu_reset;
-		}
-	}
-
-	/* This is the primary cpu how should I boot? */
-	else if (do_normal_boot()) {
-		goto normal_image;
-	}
-	else {
-		goto fallback_image;
-	}
- normal_image:
-	asm volatile ("jmp __normal_image" 
-		: /* outputs */ 
-		: "a" (bist) /* inputs */
-		: /* clobbers */
-		);
- cpu_reset:
-	asm volatile ("jmp __cpu_reset"
-		: /* outputs */ 
-		: "a"(bist) /* inputs */
-		: /* clobbers */
-		);
- fallback_image:
 	return bist;
 }
Index: src/mainboard/msi/ms9282/romstage.c
===================================================================
--- src/mainboard/msi/ms9282/romstage.c	(revision 5256)
+++ src/mainboard/msi/ms9282/romstage.c	(working copy)
@@ -133,8 +133,6 @@
 #include "cpu/amd/model_fxx/init_cpus.c"
 #include "cpu/amd/model_fxx/fidvid.c"
 
-#if CONFIG_USE_FALLBACK_IMAGE == 1
-
 #include "southbridge/nvidia/mcp55/mcp55_enable_rom.c"
 #include "northbridge/amd/amdk8/early_ht.c"
 
@@ -156,68 +154,12 @@
 
 
 }
-void failover_process(unsigned long bist, unsigned long cpu_init_detectedx)
-{
-        unsigned last_boot_normal_x = last_boot_normal();
 
-        /* Is this a cpu only reset? or Is this a secondary cpu? */
-        if ((cpu_init_detectedx) || (!boot_cpu())) {
-                if (last_boot_normal_x) {
-                        goto normal_image;
-                } else {
-                        goto fallback_image;
-                }
-        }
-
-        /* Nothing special needs to be done to find bus 0 */
-        /* Allow the HT devices to be found */
-
-        enumerate_ht_chain();
-
-        sio_setup();
-
-        /* Setup the mcp55 */
-        mcp55_enable_rom();
-
-        /* Is this a deliberate reset by the bios */
-        if (bios_reset_detected() && last_boot_normal_x) {
-                goto normal_image;
-        }
-        /* This is the primary cpu how should I boot? */
-        else if (do_normal_boot()) {
-                goto normal_image;
-        }
-        else {
-                goto fallback_image;
-        }
- normal_image:
-        __asm__ volatile ("jmp __normal_image"
-                : /* outputs */
-                : "a" (bist), "b"(cpu_init_detectedx) /* inputs */
-                );
-
- fallback_image:
-       ;
-}
-#endif
-
-void real_main(unsigned long bist, unsigned long cpu_init_detectedx);
-
-void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx)
-{
-
-#if CONFIG_USE_FALLBACK_IMAGE == 1
-        failover_process(bist, cpu_init_detectedx);
-#endif
-        real_main(bist, cpu_init_detectedx);
-
-}
-
 //CPU 1 mem is on SMBUS_HUB channel 2, and CPU 2 mem is on channel 1.
 #define RC0 (2<<8)
 #define RC1 (1<<8)
 
-void real_main(unsigned long bist, unsigned long cpu_init_detectedx)
+void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx)
 {
        static const uint16_t spd_addr [] = {
                        RC0|(0xa<<3)|0, RC0|(0xa<<3)|2, RC0|(0xa<<3)|4, RC0|(0xa<<3)|6,
@@ -233,6 +175,18 @@
        struct sys_info *sysinfo = (CONFIG_DCACHE_RAM_BASE + CONFIG_DCACHE_RAM_SIZE - CONFIG_DCACHE_RAM_GLOBAL_VAR_SIZE);
        char *p ;
 
+        if (!((cpu_init_detectedx) || (!boot_cpu()))) {
+		/* Nothing special needs to be done to find bus 0 */
+		/* Allow the HT devices to be found */
+
+		enumerate_ht_chain();
+
+		sio_setup();
+
+		/* Setup the mcp55 */
+		mcp55_enable_rom();
+        }
+
         if (bist == 0) {
                //init_cpus(cpu_init_detectedx);
                bsp_apicid = init_cpus(cpu_init_detectedx, sysinfo);
Index: src/mainboard/msi/ms9185/romstage.c
===================================================================
--- src/mainboard/msi/ms9185/romstage.c	(revision 5256)
+++ src/mainboard/msi/ms9185/romstage.c	(working copy)
@@ -153,73 +153,10 @@
 
 #include "cpu/amd/model_fxx/fidvid.c"
 
-#if CONFIG_USE_FALLBACK_IMAGE == 1
-
 #include "northbridge/amd/amdk8/early_ht.c"
 
-void failover_process(unsigned long bist, unsigned long cpu_init_detectedx)
-{
-
-        /* Is this a cpu only reset? Is this a secondary cpu? */
-        if ((cpu_init_detectedx) || (!boot_cpu())) {
-                if (last_boot_normal()) { // RTC already inited
-                        goto normal_image;
-                } else {
-                        goto fallback_image;
-                }
-        }
-        /* Nothing special needs to be done to find bus 0 */
-        /* Allow the HT devices to be found */
-
-        enumerate_ht_chain();
-
-        bcm5785_enable_rom();
-
-        bcm5785_enable_lpc();
-
-        //enable RTC
-        pc87417_enable_dev(RTC_DEV);
-
-        /* Is this a deliberate reset by the bios */
-//        post_code(0x22);
-        if (bios_reset_detected() && last_boot_normal()) {
-                goto normal_image;
-        }
-        /* This is the primary cpu how should I boot? */
-        else if (do_normal_boot()) {
-                goto normal_image;
-        }
-        else {
-                goto fallback_image;
-        }
- normal_image:
-//        post_code(0x23);
-        __asm__ volatile ("jmp __normal_image"
-                : /* outputs */
-                : "a" (bist), "b" (cpu_init_detectedx) /* inputs */
-                );
-
- fallback_image:
-//        post_code(0x25);
-        ;
-
-}
-#endif
-
-void real_main(unsigned long bist, unsigned long cpu_init_detectedx);
-
 void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx)
 {
-
-#if CONFIG_USE_FALLBACK_IMAGE == 1
-       failover_process(bist, cpu_init_detectedx);
-#endif
-       real_main(bist, cpu_init_detectedx);
-
-}
-
-void real_main(unsigned long bist, unsigned long cpu_init_detectedx)
-{
        static const uint16_t spd_addr[] = {
                        //first node
                         RC0|DIMM0, RC0|DIMM2, RC0|DIMM4, RC0|DIMM6,
@@ -237,6 +174,20 @@
         int needs_reset;
         unsigned bsp_apicid = 0;
 
+        if (!((cpu_init_detectedx) || (!boot_cpu()))) {
+		/* Nothing special needs to be done to find bus 0 */
+		/* Allow the HT devices to be found */
+
+		enumerate_ht_chain();
+
+		bcm5785_enable_rom();
+
+		bcm5785_enable_lpc();
+
+		//enable RTC
+		pc87417_enable_dev(RTC_DEV);
+        }
+
         if (bist == 0) {
                bsp_apicid = init_cpus(cpu_init_detectedx, sysinfo);
         }
Index: src/mainboard/arima/hdama/romstage.c
===================================================================
--- src/mainboard/arima/hdama/romstage.c	(revision 5256)
+++ src/mainboard/arima/hdama/romstage.c	(working copy)
@@ -95,66 +95,11 @@
 
 #include "cpu/amd/model_fxx/init_cpus.c"
 
-#if CONFIG_USE_FALLBACK_IMAGE == 1
-
 #include "southbridge/amd/amd8111/amd8111_enable_rom.c"
 #include "northbridge/amd/amdk8/early_ht.c"
 
-void failover_process(unsigned long bist, unsigned long cpu_init_detectedx)
-{
-	unsigned last_boot_normal_x = last_boot_normal();
-
-	/* Is this a cpu only reset? or Is this a secondary cpu? */
-	if ((cpu_init_detectedx) || (!boot_cpu())) {
-		if (last_boot_normal_x) {
-			goto normal_image;
-		} else {
-			goto fallback_image;
-		}
-	}
-
-	/* Nothing special needs to be done to find bus 0 */
-	/* Allow the HT devices to be found */
-
-	enumerate_ht_chain();
-
-	amd8111_enable_rom();
-
-	/* Is this a deliberate reset by the bios */
-	if (bios_reset_detected() && last_boot_normal_x) {
-		goto normal_image;
-	}
-	/* This is the primary cpu how should I boot? */
-	else if (do_normal_boot()) {
-		goto normal_image;
-	}
-	else {
-		goto fallback_image;
-	}
- normal_image:
-	__asm__ volatile ("jmp __normal_image"
-		: /* outputs */
-		: "a" (bist) , "b" (cpu_init_detectedx) /* inputs */
-		);
-
- fallback_image:
-	;
-}
-#endif
-
-void real_main(unsigned long bist, unsigned long cpu_init_detectedx);
-
 void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx)
 {
-
-#if CONFIG_USE_FALLBACK_IMAGE == 1
-	failover_process(bist, cpu_init_detectedx);
-#endif
-	real_main(bist, cpu_init_detectedx);
-}
-
-void real_main(unsigned long bist, unsigned long cpu_init_detectedx)
-{
 	static const uint16_t spd_addr [] = {
 		(0xa<<3)|0, (0xa<<3)|2, 0, 0,
 		(0xa<<3)|1, (0xa<<3)|3, 0, 0,
@@ -169,6 +114,15 @@
 	struct mem_controller ctrl[8];
 	unsigned nodes;
 
+	if (!((cpu_init_detectedx) || (!boot_cpu()))) {
+		/* Nothing special needs to be done to find bus 0 */
+		/* Allow the HT devices to be found */
+
+		enumerate_ht_chain();
+
+		amd8111_enable_rom();
+	}
+
 	if (bist == 0) {
 		bsp_apicid = init_cpus(cpu_init_detectedx);
 	}
Index: src/mainboard/sunw/ultra40/romstage.c
===================================================================
--- src/mainboard/sunw/ultra40/romstage.c	(revision 5256)
+++ src/mainboard/sunw/ultra40/romstage.c	(working copy)
@@ -112,8 +112,6 @@
 #include "cpu/amd/model_fxx/init_cpus.c"
 
 
-#if CONFIG_USE_FALLBACK_IMAGE == 1
-
 #include "southbridge/nvidia/ck804/ck804_enable_rom.c"
 #include "northbridge/amd/amdk8/early_ht.c"
 
@@ -146,65 +144,8 @@
 
 }
 
-void failover_process(unsigned long bist, unsigned long cpu_init_detectedx)
-{
-        unsigned last_boot_normal_x = last_boot_normal();
-
-        /* Is this a cpu only reset? or Is this a secondary cpu? */
-        if ((cpu_init_detectedx) || (!boot_cpu())) {
-                if (last_boot_normal_x) {
-                        goto normal_image;
-                } else {
-                        goto fallback_image;
-                }
-        }
-
-        /* Nothing special needs to be done to find bus 0 */
-        /* Allow the HT devices to be found */
-
-        enumerate_ht_chain();
-
-        sio_setup();
-
-        /* Setup the ck804 */
-        ck804_enable_rom();
-
-        /* Is this a deliberate reset by the bios */
-        if (bios_reset_detected() && last_boot_normal_x) {
-                goto normal_image;
-        }
-        /* This is the primary cpu how should I boot? */
-        else if (do_normal_boot()) {
-                goto normal_image;
-        }
-        else {
-                goto fallback_image;
-        }
- normal_image:
-        __asm__ volatile ("jmp __normal_image"
-                : /* outputs */
-                : "a" (bist), "b" (cpu_init_detectedx) /* inputs */
-                );
-
- fallback_image:
-	;
-}
-#endif
-
-void real_main(unsigned long bist, unsigned long cpu_init_detectedx);
-
 void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx)
 {
-
-#if CONFIG_USE_FALLBACK_IMAGE == 1
-        failover_process(bist, cpu_init_detectedx);
-#endif
-        real_main(bist, cpu_init_detectedx);
-
-}
-
-void real_main(unsigned long bist, unsigned long cpu_init_detectedx)
-{
 	static const uint16_t spd_addr [] = {
 			(0xa<<3)|0, (0xa<<3)|2, 0, 0,
 			(0xa<<3)|1, (0xa<<3)|3, 0, 0,
@@ -220,6 +161,18 @@
         struct mem_controller ctrl[8];
         unsigned nodes;
 
+        if (!((cpu_init_detectedx) || (!boot_cpu()))) {
+		/* Nothing special needs to be done to find bus 0 */
+		/* Allow the HT devices to be found */
+
+		enumerate_ht_chain();
+
+		sio_setup();
+
+		/* Setup the ck804 */
+		ck804_enable_rom();
+        }
+
         if (bist == 0) {
                 bsp_apicid = init_cpus(cpu_init_detectedx);
         }
Index: src/mainboard/newisys/khepri/romstage.c
===================================================================
--- src/mainboard/newisys/khepri/romstage.c	(revision 5256)
+++ src/mainboard/newisys/khepri/romstage.c	(working copy)
@@ -108,71 +108,11 @@
 #include "cpu/amd/model_fxx/init_cpus.c"
 
 
-#if CONFIG_USE_FALLBACK_IMAGE == 1
-
 #include "southbridge/amd/amd8111/amd8111_enable_rom.c"
 #include "northbridge/amd/amdk8/early_ht.c"
 
-void failover_process(unsigned long bist, unsigned long cpu_init_detectedx)
-{
-        unsigned last_boot_normal_x = last_boot_normal();
-
-        /* Is this a cpu only reset? or Is this a secondary cpu? */
-        if ((cpu_init_detectedx) || (!boot_cpu())) {
-                if (last_boot_normal_x) {
-                        goto normal_image;
-                } else {
-                        goto fallback_image;
-                }
-        }
-
-        /* Nothing special needs to be done to find bus 0 */
-        /* Allow the HT devices to be found */
-
-        enumerate_ht_chain();
-
-        /* Setup the amd8111 */
-        amd8111_enable_rom();
-
-        /* Is this a deliberate reset by the bios */
-//        post_code(0x22);
-        if (bios_reset_detected() && last_boot_normal_x) {
-                goto normal_image;
-        }
-        /* This is the primary cpu how should I boot? */
-        else if (do_normal_boot()) {
-                goto normal_image;
-        }
-        else {
-                goto fallback_image;
-        }
- normal_image:
-//        post_code(0x23);
-        __asm__ volatile ("jmp __normal_image"
-                : /* outputs */
-                : "a" (bist), "b" (cpu_init_detectedx) /* inputs */
-                );
-
- fallback_image:
-//        post_code(0x25);
-	;
-}
-#endif
-
-void real_main(unsigned long bist, unsigned long cpu_init_detectedx);
-
 void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx)
 {
-
-#if CONFIG_USE_FALLBACK_IMAGE == 1
-        failover_process(bist, cpu_init_detectedx);
-#endif
-        real_main(bist, cpu_init_detectedx);
-
-}
-
-void real_main(unsigned long bist, unsigned long cpu_init_detectedx)
-{
 	static const uint16_t spd_addr [] = {
 			(0xa<<3)|0, (0xa<<3)|2, 0, 0,
 			(0xa<<3)|1, (0xa<<3)|3, 0, 0,
@@ -188,6 +128,16 @@
         struct mem_controller ctrl[8];
         unsigned nodes;
 
+        if (!((cpu_init_detectedx) || (!boot_cpu()))) {
+		/* Nothing special needs to be done to find bus 0 */
+		/* Allow the HT devices to be found */
+
+		enumerate_ht_chain();
+
+		/* Setup the amd8111 */
+		amd8111_enable_rom();
+        }
+
         if (bist == 0) {
                 bsp_apicid = init_cpus(cpu_init_detectedx);
         }
Index: src/mainboard/technexion/tim8690/romstage.c
===================================================================
--- src/mainboard/technexion/tim8690/romstage.c	(revision 5256)
+++ src/mainboard/technexion/tim8690/romstage.c	(working copy)
@@ -100,60 +100,10 @@
 
 #include "cpu/amd/model_fxx/fidvid.c"
 
-#if CONFIG_USE_FALLBACK_IMAGE == 1
-
 #include "northbridge/amd/amdk8/early_ht.c"
 
-void failover_process(unsigned long bist, unsigned long cpu_init_detectedx)
-{
-	/* Is this a cpu only reset? Is this a secondary cpu? */
-	if ((cpu_init_detectedx) || (!boot_cpu())) {
-		if (last_boot_normal()) {	/* RTC already inited */
-			goto normal_image;
-		} else {
-			goto fallback_image;
-		}
-	}
-	/* Nothing special needs to be done to find bus 0 */
-	/* Allow the HT devices to be found */
-	enumerate_ht_chain();
-
-	/* sb600_lpc_port80(); */
-	sb600_pci_port80();
-
-	/* Is this a deliberate reset by the bios */
-	if (bios_reset_detected() && last_boot_normal()) {
-		goto normal_image;
-	}
-	/* This is the primary cpu how should I boot? */
-	else if (do_normal_boot()) {
-		goto normal_image;
-	} else {
-		goto fallback_image;
-	}
-normal_image:
-	post_code(0x23);
-	__asm__ volatile ("jmp __normal_image":	/* outputs */
-			  :"a" (bist), "b"(cpu_init_detectedx)	/* inputs */);
-
-fallback_image:
-	post_code(0x25);
-}
-#endif				/* CONFIG_USE_FALLBACK_IMAGE == 1 */
-
-void real_main(unsigned long bist, unsigned long cpu_init_detectedx);
-
 void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx)
 {
-
-#if CONFIG_USE_FALLBACK_IMAGE == 1
-	failover_process(bist, cpu_init_detectedx);
-#endif
-	real_main(bist, cpu_init_detectedx);
-}
-
-void real_main(unsigned long bist, unsigned long cpu_init_detectedx)
-{
 	static const u16 spd_addr[] = { DIMM0, 0, 0, 0, DIMM1, 0, 0, 0, };
 	int needs_reset = 0;
 	u32 bsp_apicid = 0;
@@ -162,6 +112,15 @@
 	struct sys_info *sysinfo = (struct sys_info *)(CONFIG_DCACHE_RAM_BASE + CONFIG_DCACHE_RAM_SIZE - CONFIG_DCACHE_RAM_GLOBAL_VAR_SIZE);
 
 
+	if (!((cpu_init_detectedx) || (!boot_cpu()))) {
+		/* Nothing special needs to be done to find bus 0 */
+		/* Allow the HT devices to be found */
+		enumerate_ht_chain();
+
+		/* sb600_lpc_port80(); */
+		sb600_pci_port80();
+	}
+
 	if (bist == 0) {
 		bsp_apicid = init_cpus(cpu_init_detectedx, sysinfo);
 	}
Index: src/mainboard/technexion/tim5690/romstage.c
===================================================================
--- src/mainboard/technexion/tim5690/romstage.c	(revision 5256)
+++ src/mainboard/technexion/tim5690/romstage.c	(working copy)
@@ -103,61 +103,10 @@
 #include "tn_post_code.c"
 #include "speaker.c"
 
-
-#if CONFIG_USE_FALLBACK_IMAGE == 1
-
 #include "northbridge/amd/amdk8/early_ht.c"
 
-void failover_process(unsigned long bist, unsigned long cpu_init_detectedx)
-{
-	/* Is this a cpu only reset? Is this a secondary cpu? */
-	if ((cpu_init_detectedx) || (!boot_cpu())) {
-		if (last_boot_normal()) {	/* RTC already inited */
-			goto normal_image;
-		} else {
-			goto fallback_image;
-		}
-	}
-	/* Nothing special needs to be done to find bus 0 */
-	/* Allow the HT devices to be found */
-	enumerate_ht_chain();
-
-	/* sb600_lpc_port80(); */
-	sb600_pci_port80();
-
-	/* Is this a deliberate reset by the bios */
-	if (bios_reset_detected() && last_boot_normal()) {
-		goto normal_image;
-	}
-	/* This is the primary cpu how should I boot? */
-	else if (do_normal_boot()) {
-		goto normal_image;
-	} else {
-		goto fallback_image;
-	}
-normal_image:
-	post_code(0x23);
-	__asm__ volatile ("jmp __normal_image":	/* outputs */
-			  :"a" (bist), "b"(cpu_init_detectedx)	/* inputs */);
-
-fallback_image:
-	post_code(0x25);
-}
-#endif				/* CONFIG_USE_FALLBACK_IMAGE == 1 */
-
-void real_main(unsigned long bist, unsigned long cpu_init_detectedx);
-
 void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx)
 {
-
-#if CONFIG_USE_FALLBACK_IMAGE == 1
-	failover_process(bist, cpu_init_detectedx);
-#endif
-	real_main(bist, cpu_init_detectedx);
-}
-
-void real_main(unsigned long bist, unsigned long cpu_init_detectedx)
-{
 	static const u16 spd_addr[] = { DIMM0, 0, 0, 0, DIMM1, 0, 0, 0, };
 	int needs_reset = 0;
 	u32 bsp_apicid = 0;
@@ -165,6 +114,15 @@
 	struct cpuid_result cpuid1;
 	struct sys_info *sysinfo = (struct sys_info *)(CONFIG_DCACHE_RAM_BASE + CONFIG_DCACHE_RAM_SIZE - CONFIG_DCACHE_RAM_GLOBAL_VAR_SIZE);
 
+	if (!((cpu_init_detectedx) || (!boot_cpu()))) {
+		/* Nothing special needs to be done to find bus 0 */
+		/* Allow the HT devices to be found */
+		enumerate_ht_chain();
+
+		/* sb600_lpc_port80(); */
+		sb600_pci_port80();
+	}
+
 	technexion_post_code_init();
 	technexion_post_code(LED_MESSAGE_START);
 
Index: src/mainboard/ibm/e326/romstage.c
===================================================================
--- src/mainboard/ibm/e326/romstage.c	(revision 5256)
+++ src/mainboard/ibm/e326/romstage.c	(working copy)
@@ -92,68 +92,11 @@
 
 #include "cpu/amd/model_fxx/init_cpus.c"
 
-
-#if CONFIG_USE_FALLBACK_IMAGE == 1
-
 #include "southbridge/amd/amd8111/amd8111_enable_rom.c"
 #include "northbridge/amd/amdk8/early_ht.c"
 
-void failover_process(unsigned long bist, unsigned long cpu_init_detectedx)
-{
-        unsigned last_boot_normal_x = last_boot_normal();
-
-        /* Is this a cpu only reset? or Is this a secondary cpu? */
-        if ((cpu_init_detectedx) || (!boot_cpu())) {
-                if (last_boot_normal_x) {
-                        goto normal_image;
-                } else {
-                        goto fallback_image;
-                }
-        }
-
-        /* Nothing special needs to be done to find bus 0 */
-        /* Allow the HT devices to be found */
-
-        enumerate_ht_chain();
-
-        amd8111_enable_rom();
-
-        /* Is this a deliberate reset by the bios */
-        if (bios_reset_detected() && last_boot_normal_x) {
-                goto normal_image;
-        }
-        /* This is the primary cpu how should I boot? */
-        else if (do_normal_boot()) {
-                goto normal_image;
-        }
-        else {
-                goto fallback_image;
-        }
- normal_image:
-        __asm__ volatile ("jmp __normal_image"
-                : /* outputs */
-                : "a" (bist) , "b" (cpu_init_detectedx) /* inputs */
-                );
-
- fallback_image:
-	;
-}
-#endif
-
-void real_main(unsigned long bist, unsigned long cpu_init_detectedx);
-
 void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx)
 {
-
-#if CONFIG_USE_FALLBACK_IMAGE == 1
-        failover_process(bist, cpu_init_detectedx);
-#endif
-        real_main(bist, cpu_init_detectedx);
-
-}
-
-void real_main(unsigned long bist, unsigned long cpu_init_detectedx)
-{
 	static const struct mem_controller cpu[] = {
 		{
 			.node_id = 0,
@@ -179,6 +122,15 @@
 
         int needs_reset;
 
+        if (!((cpu_init_detectedx) || (!boot_cpu()))) {
+		/* Nothing special needs to be done to find bus 0 */
+		/* Allow the HT devices to be found */
+
+		enumerate_ht_chain();
+
+		amd8111_enable_rom();
+        }
+
         if (bist == 0) {
 		init_cpus(cpu_init_detectedx);
         }
Index: src/mainboard/ibm/e325/romstage.c
===================================================================
--- src/mainboard/ibm/e325/romstage.c	(revision 5256)
+++ src/mainboard/ibm/e325/romstage.c	(working copy)
@@ -93,67 +93,11 @@
 #include "cpu/amd/model_fxx/init_cpus.c"
 
 
-#if CONFIG_USE_FALLBACK_IMAGE == 1
-
 #include "southbridge/amd/amd8111/amd8111_enable_rom.c"
 #include "northbridge/amd/amdk8/early_ht.c"
 
-void failover_process(unsigned long bist, unsigned long cpu_init_detectedx)
-{
-        unsigned last_boot_normal_x = last_boot_normal();
-
-        /* Is this a cpu only reset? or Is this a secondary cpu? */
-        if ((cpu_init_detectedx) || (!boot_cpu())) {
-                if (last_boot_normal_x) {
-                        goto normal_image;
-                } else {
-                        goto fallback_image;
-                }
-        }
-
-        /* Nothing special needs to be done to find bus 0 */
-        /* Allow the HT devices to be found */
-
-        enumerate_ht_chain();
-
-        amd8111_enable_rom();
-
-        /* Is this a deliberate reset by the bios */
-        if (bios_reset_detected() && last_boot_normal_x) {
-                goto normal_image;
-        }
-        /* This is the primary cpu how should I boot? */
-        else if (do_normal_boot()) {
-                goto normal_image;
-        }
-        else {
-                goto fallback_image;
-        }
- normal_image:
-        __asm__ volatile ("jmp __normal_image"
-                : /* outputs */
-                : "a" (bist) , "b" (cpu_init_detectedx) /* inputs */
-                );
-
- fallback_image:
-	;
-}
-#endif
-
-void real_main(unsigned long bist, unsigned long cpu_init_detectedx);
-
 void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx)
 {
-
-#if CONFIG_USE_FALLBACK_IMAGE == 1
-        failover_process(bist, cpu_init_detectedx);
-#endif
-        real_main(bist, cpu_init_detectedx);
-
-}
-
-void real_main(unsigned long bist, unsigned long cpu_init_detectedx)
-{
 	static const struct mem_controller cpu[] = {
 		{
 			.node_id = 0,
@@ -179,6 +123,15 @@
 
         int needs_reset;
 
+        if (!((cpu_init_detectedx) || (!boot_cpu()))) {
+		/* Nothing special needs to be done to find bus 0 */
+		/* Allow the HT devices to be found */
+
+		enumerate_ht_chain();
+
+		amd8111_enable_rom();
+        }
+
         if (bist == 0) {
 		init_cpus(cpu_init_detectedx);
         }
Index: src/mainboard/intel/xe7501devkit/failover.c
===================================================================
--- src/mainboard/intel/xe7501devkit/failover.c	(revision 5256)
+++ src/mainboard/intel/xe7501devkit/failover.c	(working copy)
@@ -13,36 +13,5 @@
 
 static unsigned long main(unsigned long bist)
 {
-	/* Is this a deliberate reset by the bios */
-	if (bios_reset_detected() && last_boot_normal()) {
-		goto normal_image;
-	}
-	/* This is the primary cpu how should I boot? */
-	else  {
-
-		check_cmos_failed();		
-
-		if (do_normal_boot()) {
-			goto normal_image;
-		}
-		else {
-			goto fallback_image;
-		}
-	}
- normal_image:
-	asm volatile ("jmp __normal_image" 
-		: /* outputs */ 
-		: "a" (bist) /* inputs */
-		: /* clobbers */
-		);
-#if 0
- cpu_reset:
-	asm volatile ("jmp __cpu_reset"
-		: /* outputs */ 
-		: "a"(bist) /* inputs */
-		: /* clobbers */
-		);
-#endif
- fallback_image:
 	return bist;
 }
Index: src/mainboard/intel/jarrell/failover.c
===================================================================
--- src/mainboard/intel/jarrell/failover.c	(revision 5256)
+++ src/mainboard/intel/jarrell/failover.c	(working copy)
@@ -14,34 +14,5 @@
 
 static unsigned long main(unsigned long bist)
 {
-	/* Did just the cpu reset? */
-	if (memory_initialized()) {
-	 	if (last_boot_normal()) {
-			goto normal_image;
-		} else {
-			goto cpu_reset;
-		}
-	}
-
-	/* This is the primary cpu how should I boot? */
-	else if (do_normal_boot()) {
-		goto normal_image;
-	}
-	else {
-		goto fallback_image;
-	}
- normal_image:
-	asm volatile ("jmp __normal_image" 
-		: /* outputs */ 
-		: "a" (bist) /* inputs */
-		: /* clobbers */
-		);
- cpu_reset:
-	asm volatile ("jmp __cpu_reset"
-		: /* outputs */ 
-		: "a"(bist) /* inputs */
-		: /* clobbers */
-		);
- fallback_image:
 	return bist;
 }
Index: src/mainboard/asus/a8v-e_se/romstage.c
===================================================================
--- src/mainboard/asus/a8v-e_se/romstage.c	(revision 5256)
+++ src/mainboard/asus/a8v-e_se/romstage.c	(working copy)
@@ -176,68 +176,8 @@
 	pnp_exit_ext_func_mode(GPIO_DEV);
 }
 
-#if CONFIG_USE_FALLBACK_IMAGE == 1
-
-void failover_process(unsigned long bist, unsigned long cpu_init_detectedx)
-{
-	/* unsigned last_boot_normal_x = last_boot_normal(); */
-	/* FIXME */
-	unsigned last_boot_normal_x = 1;
-
-	sio_init();
-	w83627ehg_enable_serial(SERIAL_DEV, CONFIG_TTYS0_BASE);
-	uart_init();
-	console_init();
-	enable_rom_decode();
-
-	print_info("now booting... fallback\r\n");
-
-	/* Is this a CPU only reset? Or is this a secondary CPU? */
-	if ((cpu_init_detectedx) || (!boot_cpu())) {
-		if (last_boot_normal_x)
-			goto normal_image;
-		else
-			goto fallback_image;
-	}
-
-	/* Nothing special needs to be done to find bus 0. */
-	/* Allow the HT devices to be found. */
-	enumerate_ht_chain();
-
-	/* Is this a deliberate reset by the BIOS? */
-	if (bios_reset_detected() && last_boot_normal_x) {
-		goto normal_image;
-	}
-	/* This is the primary CPU, how should I boot? */
-	else if (do_normal_boot()) {
-		goto normal_image;
-	} else {
-		goto fallback_image;
-	}
-
-normal_image:
-	/* print_info("JMP normal image\r\n"); */
-
-	__asm__ __volatile__("jmp __normal_image":
-			     :"a" (bist), "b" (cpu_init_detectedx));
-
-fallback_image:
-	;
-}
-#endif
-
-void real_main(unsigned long bist, unsigned long cpu_init_detectedx);
-
 void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx)
 {
-#if CONFIG_USE_FALLBACK_IMAGE == 1
-	failover_process(bist, cpu_init_detectedx);
-#endif
-	real_main(bist, cpu_init_detectedx);
-}
-
-void real_main(unsigned long bist, unsigned long cpu_init_detectedx)
-{
 	static const uint16_t spd_addr[] = {
 		(0xa << 3) | 0, (0xa << 3) | 2, 0, 0,
 		(0xa << 3) | 1, (0xa << 3) | 3, 0, 0,
@@ -258,6 +198,21 @@
 	console_init();
 	enable_rom_decode();
 
+	print_info("now booting... fallback\r\n");
+
+	/* Is this a CPU only reset? Or is this a secondary CPU? */
+	if (!((cpu_init_detectedx) || (!boot_cpu()))) {
+		/* Nothing special needs to be done to find bus 0. */
+		/* Allow the HT devices to be found. */
+		enumerate_ht_chain();
+	}
+
+	sio_init();
+	w83627ehg_enable_serial(SERIAL_DEV, CONFIG_TTYS0_BASE);
+	uart_init();
+	console_init();
+	enable_rom_decode();
+
 	print_info("now booting... real_main\r\n");
 
 	if (bist == 0)
Index: src/arch/i386/Makefile.inc
===================================================================
--- src/arch/i386/Makefile.inc	(revision 5256)
+++ src/arch/i386/Makefile.inc	(working copy)
@@ -87,7 +87,6 @@
 crt0s :=
 ldscripts :=
 ldscripts += $(src)/arch/i386/init/ldscript_fallback_cbfs.lb
-ldscripts += $(src)/arch/i386/lib/failover.lds
 ifeq ($(CONFIG_BIG_BOOTBLOCK),y)
 crt0s += $(src)/cpu/x86/16bit/entry16.inc
 ldscripts += $(src)/cpu/x86/16bit/entry16.lds
@@ -160,12 +159,6 @@
 ldscripts += $(src)/cpu/x86/car/cache_as_ram.lds
 endif
 
-ifeq ($(CONFIG_BIG_BOOTBLOCK),y)
-ifeq ($(CONFIG_ROMCC),y)
-crt0s += $(obj)/mainboard/$(MAINBOARDDIR)/failover.inc
-endif
-endif
-
 ifeq ($(CONFIG_LLSHELL),y)
 crt0s += $(src)/arch/i386/llshell/llshell.inc
 endif
@@ -196,10 +189,6 @@
 ifeq ($(CONFIG_ROMCC),y)
 ROMCCFLAGS ?= -mcpu=p2 -O2
 
-$(obj)/mainboard/$(MAINBOARDDIR)/failover.inc: $(obj)/romcc $(src)/arch/i386/lib/failover.c
-	printf "    ROMCC      failover.inc\n"
-	$(obj)/romcc $(ROMCCFLAGS) --label-prefix=failover $(INCLUDES) $(src)/arch/i386/lib/failover.c -o $@
-
 $(obj)/mainboard/$(MAINBOARDDIR)/romstage.inc: $(src)/mainboard/$(MAINBOARDDIR)/romstage.c $(obj)/romcc $(OPTION_TABLE_H) $(obj)/build.h
 	printf "    ROMCC      romstage.inc\n"
 	$(obj)/romcc $(ROMCCFLAGS) -include $(obj)/build.h $(INCLUDES) $< -o $@
Index: src/arch/i386/lib/failover.lds
===================================================================
--- src/arch/i386/lib/failover.lds	(revision 5256)
+++ src/arch/i386/lib/failover.lds	(working copy)
@@ -1 +0,0 @@
-	__normal_image = (CONFIG_ROMBASE & 0xfffffff0) - 8;
Index: src/arch/i386/lib/failover.c
===================================================================
--- src/arch/i386/lib/failover.c	(revision 5256)
+++ src/arch/i386/lib/failover.c	(working copy)
@@ -1,50 +0,0 @@
-/*
- * This file is part of the coreboot project.
- *
- * Copyright (C) 2007 Uwe Hermann <uwe@hermann-uwe.de>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301 USA
- */
-
-#define ASSEMBLY 1
-#define __PRE_RAM__
-
-#include <arch/io.h>
-#include "arch/romcc_io.h"
-#include "pc80/mc146818rtc_early.c"
-
-/**
- * Check whether the normal or the fallback image should be booted
- * (by reading the proper flag from CMOS), and boot it.
- *
- * @param bist The input BIST value.
- * @return The BIST value.
- */
-static unsigned long main(unsigned long bist)
-{
-	if (do_normal_boot())
-		goto normal_image;
-	else
-		goto fallback_image;
-
-normal_image:
-	__asm__ __volatile__("jmp __normal_image" : : "a" (bist) : );
-
-cpu_reset:
-	__asm__ __volatile__("jmp __cpu_reset" : : "a" (bist) : );
-
-fallback_image:
-	return bist;
-}
