move model_6ex car to a single file. No more .c files that only consist of a
single several pages long asm statement

Could use some renumbering of post codes, but that's good for another time.

Signed-off-by: Stefan Reinauer <stepan@coresystems.de>

Index: src/cpu/intel/model_6ex/cache_as_ram_disable.c
===================================================================
--- src/cpu/intel/model_6ex/cache_as_ram_disable.c	(revision 5410)
+++ src/cpu/intel/model_6ex/cache_as_ram_disable.c	(working copy)
@@ -1,89 +0,0 @@
-/*
- * This file is part of the coreboot project.
- * 
- * Copyright (C) 2007-2009 coresystems GmbH
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; version 2 of
- * the License.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
- * MA 02110-1301 USA
- */
-
-#include <arch/stages.h>
-
-/* called from assembler code */
-void stage1_main(unsigned long bist);
-
-/* from romstage.c */
-void real_main(unsigned long bist);
-
-void stage1_main(unsigned long bist)
-{
-	unsigned int cpu_reset = 0;
-
-	real_main(bist);
-
-	/* No servicable parts below this line .. */
-#ifdef CAR_DEBUG
-        /* Check value of esp to verify if we have enough rom for stack in Cache as RAM */
-	unsigned v_esp;
-	__asm__ volatile (
-        	"movl   %%esp, %0\n"
-		: "=a" (v_esp)
-	);
-	printk(BIOS_SPEW, "v_esp=%08x\n", v_esp);
-#endif
-
-        printk(BIOS_SPEW, "cpu_reset = %08x\n", cpu_reset);
-	printk(BIOS_SPEW, "No cache as ram now - ");
-
-	/* store cpu_reset to ebx */
-        __asm__ volatile (
-                "movl %0, %%ebx\n\t"
-                ::"a" (cpu_reset)
-        );
-
-#undef CLEAR_FIRST_1M_RAM 
-#include "cache_as_ram_post.c"
-
-	/* For now: use rambase + 1MB - 64K (counting downwards) as stack. This
-	 * makes sure that we stay completely within the 1M of memory we
-	 * preserve with the memcpy above.
-	 */
-
-#ifndef HIGH_MEMORY_SAVE
-#define HIGH_MEMORY_SAVE ( (1024 - 64) * 1024 )
-#endif
-
-	__asm__ volatile (
-		"movl %0, %%ebp\n"
-		"movl %0, %%esp\n"
-		:: "a" (CONFIG_RAMBASE + HIGH_MEMORY_SAVE)
-	);
-
-	{
-		unsigned new_cpu_reset;
-
-		/* get back cpu_reset from ebx */
-		__asm__ volatile (
-			"movl %%ebx, %0\n"
-			:"=a" (new_cpu_reset)
-		);
-
-		/* Copy and execute coreboot_ram */
-		copy_and_run(new_cpu_reset);
-	}
-
-	/* We will not return */
-	printk(BIOS_DEBUG, "sorry. parachute did not open.\n");
-}
Index: src/cpu/intel/model_6ex/cache_as_ram_post.c
===================================================================
--- src/cpu/intel/model_6ex/cache_as_ram_post.c	(revision 5410)
+++ src/cpu/intel/model_6ex/cache_as_ram_post.c	(working copy)
@@ -1,125 +0,0 @@
-/*
- * This file is part of the coreboot project.
- * 
- * Copyright (C) 2007-2008 coresystems GmbH
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; version 2 of
- * the License.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
- * MA 02110-1301 USA
- */
-
-        __asm__ volatile (
-
-	"movb	$0x30, %al\noutb %al, $0x80\n"
-
-	/* Disable Cache */
-	"movl	%cr0, %eax\n"
-	"orl    $(1 << 30), %eax\n"
-	"movl	%eax, %cr0\n"
-
-	"movb	$0x31, %al\noutb %al, $0x80\n"
-
-	/* Disable MTRR */
-	"movl	$MTRRdefType_MSR, %ecx\n"
-	"rdmsr\n"
-	"andl	$(~(1 << 11)), %eax\n"
-	"wrmsr\n"
-
-	"movb	$0x32, %al\noutb %al, $0x80\n"
-
-	"invd\n"
-#if 0
-	"xorl	%eax, %eax\n"
-	"xorl	%edx, %edx\n"
-	"movl	$MTRRphysBase_MSR(0), %ecx\n"
-	"wrmsr\n"
-	"movl	$MTRRphysMask_MSR(0), %ecx\n"
-	"wrmsr\n"
-	"movl	$MTRRphysBase_MSR(1), %ecx\n"
-	"wrmsr\n"
-	"movl	$MTRRphysMask_MSR(1), %ecx\n"
-	"wrmsr\n"
-#endif
-
-	"movb	$0x33, %al\noutb %al, $0x80\n"
-#ifdef CLEAR_FIRST_1M_RAM
-	"movb	$0x34, %al\noutb %al, $0x80\n"
-	/* Enable Write Combining and Speculative Reads for the first 1MB */
-	"movl	$MTRRphysBase_MSR(0), %ecx\n"
-	"movl	$(0x00000000 | MTRR_TYPE_WRCOMB), %eax\n"
-	"xorl	%edx, %edx\n"
-	"wrmsr\n"
-	"movl	$MTRRphysMask_MSR(0), %ecx\n"
-	"movl	$(~(1024*1024 -1) | (1 << 11)), %eax\n"
-	"movl	$0x0000000f, %edx\n"	// 36bit address space
-	"wrmsr\n"
-	"movb	$0x35, %al\noutb %al, $0x80\n"
-#endif
-
-	/* Enable Cache */
-	"movl	%cr0, %eax\n"
-	"andl    $~( (1 << 30) | (1 << 29) ), %eax\n"
-	"movl	%eax, %cr0\n"
-
-	"movb	$0x36, %al\noutb %al, $0x80\n"
-#ifdef CLEAR_FIRST_1M_RAM
-
-	/* Clear first 1MB of RAM */
-	"movl	$0x00000000, %edi\n"
-	"cld\n"
-	"xorl	%eax, %eax\n"
-	"movl	$((1024*1024) / 4), %ecx\n"
-	"rep stosl\n"
-	
-	"movb	$0x37, %al\noutb %al, $0x80\n"
-#endif
-
-	/* Disable Cache */
-	"movl	%cr0, %eax\n"
-	"orl    $(1 << 30), %eax\n"
-	"movl	%eax, %cr0\n"
-
-	"movb	$0x38, %al\noutb %al, $0x80\n"
-
-	/* Enable Write Back and Speculative Reads for the first 1MB */
-	"movl	$MTRRphysBase_MSR(0), %ecx\n"
-	"movl	$(0x00000000 | MTRR_TYPE_WRBACK), %eax\n"
-	"xorl	%edx, %edx\n"
-	"wrmsr\n"
-	"movl	$MTRRphysMask_MSR(0), %ecx\n"
-	"movl	$(~(1024*1024 -1) | (1 << 11)), %eax\n"
-	"movl	$0x0000000f, %edx\n"	// 36bit address space
-	"wrmsr\n"
-
-	"movb	$0x39, %al\noutb %al, $0x80\n"
-
-	/* And Enable Cache again after setting MTRRs */
-	"movl	%cr0, %eax\n"
-	"andl    $~( (1 << 30) | (1 << 29) ), %eax\n"
-	"movl	%eax, %cr0\n"
-
-	"movb	$0x3a, %al\noutb %al, $0x80\n"
-
-	/* Enable MTRR */
-	"movl	$MTRRdefType_MSR, %ecx\n"
-	"rdmsr\n"
-	"orl	$(1 << 11), %eax\n"
-	"wrmsr\n"
-
-	"movb	$0x3b, %al\noutb %al, $0x80\n"
-
-	/* Invalidate the cache again */
-	"invd\n"
-	"movb	$0x3c, %al\noutb %al, $0x80\n"
-        );
Index: src/cpu/intel/model_6ex/cache_as_ram.inc
===================================================================
--- src/cpu/intel/model_6ex/cache_as_ram.inc	(revision 5410)
+++ src/cpu/intel/model_6ex/cache_as_ram.inc	(working copy)
@@ -137,12 +137,89 @@
 
 	post_code(0x23)
 
-	call	stage1_main
+	/* Call romstage.c main function */
+	call	main
 
 	post_code(0x2f)
-error:
+
+	post_code(0x30)
+
+	/* Disable Cache */
+	movl	%cr0, %eax
+	orl    $(1 << 30), %eax
+	movl	%eax, %cr0
+
+	post_code(0x31)
+
+	/* Disable MTRR */
+	movl	$MTRRdefType_MSR, %ecx
+	rdmsr
+	andl	$(~(1 << 11)), %eax
+	wrmsr
+
+	post_code(0x31)
+
+	invd
+#if 0
+	xorl	%eax, %eax
+	xorl	%edx, %edx
+	movl	$MTRRphysBase_MSR(0), %ecx
+	wrmsr
+	movl	$MTRRphysMask_MSR(0), %ecx
+	wrmsr
+	movl	$MTRRphysBase_MSR(1), %ecx
+	wrmsr
+	movl	$MTRRphysMask_MSR(1), %ecx
+	wrmsr
+#endif
+
+	post_code(0x33)
+
+#ifdef CLEAR_FIRST_1M_RAM
+	post_code(0x34)
+	/* Enable Write Combining and Speculative Reads for the first 1MB */
+	movl	$MTRRphysBase_MSR(0), %ecx
+	movl	$(0x00000000 | MTRR_TYPE_WRCOMB), %eax
+	xorl	%edx, %edx
+	wrmsr
+	movl	$MTRRphysMask_MSR(0), %ecx
+	movl	$(~(1024*1024 -1) | (1 << 11)), %eax
+	movl	$0x0000000f, %edx	// 36bit address space
+	wrmsr
+	post_code(0x35)
+#endif
+
+	/* Enable Cache */
+	movl	%cr0, %eax
+	andl    $~( (1 << 30) | (1 << 29) ), %eax
+	movl	%eax, %cr0
+
+	/* clear boot_complete flag */
+	xorl	%ebp, %ebp
+__main:
+	post_code(0x11)
+	cld			/* clear direction flag */
+	
+	movl	%ebp, %esi
+
+	/* For now: use CONFIG_RAMBASE + 1MB - 64K (counting downwards) as stack. This
+	 * makes sure that we stay completely within the 1M-64K of memory that we
+	 * preserve for suspend/resume.
+	 */
+
+#ifndef HIGH_MEMORY_SAVE
+#warning Need a central place for HIGH_MEMORY_SAVE
+#define HIGH_MEMORY_SAVE ( (1024 - 64) * 1024 )
+#endif
+	movl $(CONFIG_RAMBASE + HIGH_MEMORY_SAVE), %esp
+	movl	%esp, %ebp
+	pushl %esi
+	call copy_and_run
+
+.Lhlt:	
+	post_code(0xee)
 	hlt
-	jmp	error
+	jmp	.Lhlt
 
 mtrr_table:
 	/* Fixed MTRRs */
Index: src/mainboard/kontron/986lcd-m/romstage.c
===================================================================
--- src/mainboard/kontron/986lcd-m/romstage.c	(revision 5410)
+++ src/mainboard/kontron/986lcd-m/romstage.c	(working copy)
@@ -359,9 +359,7 @@
 //
 #include "lib/cbmem.c"
 
-#include "cpu/intel/model_6ex/cache_as_ram_disable.c"
-
-void real_main(unsigned long bist)
+void main(unsigned long bist)
 {
 	u32 reg32;
 	int boot_mode = 0;
Index: src/mainboard/roda/rk886ex/romstage.c
===================================================================
--- src/mainboard/roda/rk886ex/romstage.c	(revision 5410)
+++ src/mainboard/roda/rk886ex/romstage.c	(working copy)
@@ -272,9 +272,8 @@
 // __PRE_RAM__ to determine whether we're in ram init stage (stage 1)
 //
 #include "lib/cbmem.c"
-#include "cpu/intel/model_6ex/cache_as_ram_disable.c"
 
-void real_main(unsigned long bist)
+void main(unsigned long bist)
 {
 	u32 reg32;
 	int boot_mode = 0;
