the bios chip is built into the board, but would the bios bootblock not work? is there any way to check for a bootblock? this is a good computer and I do not want to kill it.<br><br><div class="gmail_quote">On Mon, May 10, 2010 at 12:31 PM, Anders Jenbo <span dir="ltr"><<a href="mailto:anders@jenbo.dk">anders@jenbo.dk</a>></span> wrote:<br>

<blockquote class="gmail_quote" style="margin:0 0 0 .8ex;border-left:1px #ccc solid;padding-left:1ex;">To improve the support a bit navigate to coreboot/util/getpir/ and run<br>
make, then run ./getpir (on the GX1), this will generate a irq_tables.c<br>
file. Copy it to your folder, and add the following to the first section<br>
of your Kconfig.<br>
<br>
        select HAVE_PIRQ_TABLE<br>
<br>
Once you have done this you should be ready to compile CoreBoot and<br>
flash it on to your board.<br>
If the flashing fails or the compiled ROM doesn't work for your board<br>
could be unable to boot, so it is strongly recommended that you find or<br>
buy a similar ROM chip so that you have a working backup in case<br>
something goes wrong.<br>
<font color="#888888"><br>
-Anders<br>
<br>
</font></blockquote></div><br><br clear="all"><br>-- <br>Cooper<br>