Is probably IDE, verrrrryyy unlikely its in the BIOS Rom.<br><br>Mvh Anders<br><br>----- Reply message -----<br>Fra: "Oliver Schinagl" <oliver@schinagl.nl><br>Dato: tir., maj 25, 2010 14:01<br>Emne: [coreboot] Geode db800 vs Wyse S50<br>Til: <coreboot@coreboot.org><br><br>On 05/25/10 13:07, Joseph Smith wrote:<br>><br>><br>> On Tue, 25 May 2010 10:45:47 +0200, Oliver Schinagl <oliver@schinagl.nl><br>> wrote:<br>>   <br>>> On 05/25/10 00:16, Joseph Smith wrote:<br>>>     <br>>>> On 05/24/2010 04:36 PM, Nils wrote:<br>>>>       <br>>>>> Hi Oliver,<br>>>>><br>>>>> Oliver wrote:<br>>>>>         <br>>>>>> I just found <a href="http://www.coreboot.org/AMD_Geode_Porting_Guide">http://www.coreboot.org/AMD_Geode_Porting_Guide</a> over on<br>>>>>> the wiki and was wondering if that was maybe slightly outdated or not<br>>>>>> needed for a Wyse S10? The S10 uses similar hardware as the S50.<br>>>>>>           <br>>>>> The wiki page is a little outdated.<br>>>>>         <br>>>>>> Actually the only difference is that the S50 has 128kb onboard flash,<br>>>>>> so minor difference.<br>>>>>>           <br>>>>> Are you sure ?<br>>>>> Joseph reported that his S30 uses a cs5535 instead of the cs5536 on the<br>>>>> S50.<br>>>>>         <br>>>> Yes my S30 has a GX2 and cs5535.From what I have read both the S30 and<br>>>> S50 are upgradable to the S10. It is just a bios and software upgrade.<br>>>><br>>>> On another note I just got a V30L, sweet little VIA C& machine....<br>>>><br>>>> Hope that helps.<br>>>><br>>>>       <br>>> Hmm; I thought that the S10 was the most basic version :)<br>>><br>>><br>>> Processor:     AMD Geode GX 366MHz<br>>> Memory:     0 Flash/128MB RAM<br>>><br>>>     <br>> So S10 has 0 flash??? Does it just PXE boot?<br>><br>>   <br><br>Well it has a 2MB Bios chip, so I suppose the Wyse OS lives in the<br>biosflash area?<br><br>Other then that, it only supports RDP, ICA int he Wyse OS; booting it<br>does from the following 3 options, IDE, PXE, USB. I'll take a foto of<br>the bios, though it really isn't interesting at all.<br>>> As the S50 reads:<br>>> Processor:     AMD Geode GX 366MHz<br>>> Memory:     128MB Flash/256MB RAM<br>>><br>>> btw they use a gx in the spec instead of gx2; odd.<br>>><br>>>     <br>> Yes you will see that alot, the GX is actually the sucsesor to the GX1.<br>> Others will call it GX2 for clarification (me :-)).<br>>   <br>Ah! ok so there was GX1; and GX, but we call GX GX2 to make it sound as<br>a successor, as it is. I know linux uses GX2 in it's naming.<br>>> The S30 lists the same btw:<br>>><br>>> Processor:     AMD Geode GX 366MHz<br>>> Memory:     64MB Flash/128MB RAM<br>>><br>>>     <br>> S30 comes with different flash/ram combos.<br>> Mine has 32MB Flash/ 64MB RAM<br>>   <br>I wonder where the flash is located at, in the bios chip, or if it's an<br>IDE devices 'flash' thing.<br>>><br>>> So besides the tool outputs etc etc I posted earlier; I'll take loads of<br>>> pics. Do I need to pry off the CPUs heatsink for a pic of that? Since I<br>>> don't know how to best re-attach it; id' like to postpone that.<br>>><br>>>     <br>> Yes I think this is a great idea :-) No need to take the heatsink off, we<br>> already know what the CPU is. I propose a new wiki page "Wyse Thin Clients"<br>> That we can upload pics too, and information about each system. I have 3 or<br>> 4 different models so a central info point would be cool. I would be glad<br>> to take lots of pics too. <br>>   <br>Ok I'll do my best to make some nice pics of front/back of the pcb and<br>some of the chips.<br>>   <br>>> Also not having a GX VSA is kinda really off-putting; it basically means<br>>> I can't use coreboot on this thing yet? How did people do it on the S30<br>>> and more specifically the S50? The S50 does list as being supported, how?<br>>><br>>>     <br>> Don't worry about VSA too much, I am sure we can up with a solution when we<br>> get to that point.<br>><br>>   <br>Ok. Atm I have compiled everything and it seemed to build after some<br>tweaking fine; using the Wyse S50 mainboard.<br><br>-- <br>coreboot mailing list: coreboot@coreboot.org<br><a href="http://www.coreboot.org/mailman/listinfo/coreboot">http://www.coreboot.org/mailman/listinfo/coreboot</a><br><br><br>