coreboot-4.0-r5627M Fri Jun 11 00:40:22 EDT 2010 starting... SMBus controller enabled Found DIMM in slot 00 DIMM is 0x80MB After translation, dimm_size is 0x0d Found DIMM in slot 01 DIMM is 0x80MB After translation, dimm_size is 0x0d DRP calculated to 0xdd BUFF_SC calculated to 0x55c6 Loading stage image. Check CBFS header at fffeffe0 magic is 4f524243 Found CBFS header at fffeffe0 Check fallback/coreboot_ram Stage: loading fallback/coreboot_ram @ 0x100000 (147456 bytes), entry @ 0x100000 Stage: done loading. Jumping to image. coreboot-4.0-r5627M Fri Jun 11 00:40:22 EDT 2010 booting... Calibrating delay loop... end 88727718, start 2e2b573c 32-bit delta 1444 calibrate_tsc 32-bit result is 1444 clocks_per_usec: 1444 Enumerating buses... Show all devs...Before Device Enumeration. Root Device: enabled 1 APIC_CLUSTER: 0: enabled 1 APIC: 00: enabled 1 PCI_DOMAIN: 0000: enabled 1 PCI: 00:00.0: enabled 1 PCI: 00:01.0: enabled 1 PCI: 00:1e.0: enabled 1 PCI: 00:1f.0: enabled 1 PNP: 002e.0: enabled 1 PNP: 002e.3: enabled 1 PNP: 002e.4: enabled 1 PNP: 002e.5: enabled 0 PNP: 002e.7: enabled 1 PNP: 002e.9: enabled 0 PNP: 002e.a: enabled 1 PNP: 002e.b: enabled 0 PCI: 00:1f.1: enabled 1 PCI: 00:1f.2: enabled 1 PCI: 00:1f.3: enabled 1 PCI: 00:1f.4: enabled 1 PCI: 00:1f.5: enabled 1 PCI: 00:1f.6: enabled 0 Compare with tree... Root Device: enabled 1 APIC_CLUSTER: 0: enabled 1 APIC: 00: enabled 1 PCI_DOMAIN: 0000: enabled 1 PCI: 00:00.0: enabled 1 PCI: 00:01.0: enabled 1 PCI: 00:1e.0: enabled 1 PCI: 00:1f.0: enabled 1 PNP: 002e.0: enabled 1 PNP: 002e.3: enabled 1 PNP: 002e.4: enabled 1 PNP: 002e.5: enabled 0 PNP: 002e.7: enabled 1 PNP: 002e.9: enabled 0 PNP: 002e.a: enabled 1 PNP: 002e.b: enabled 0 PCI: 00:1f.1: enabled 1 PCI: 00:1f.2: enabled 1 PCI: 00:1f.3: enabled 1 PCI: 00:1f.4: enabled 1 PCI: 00:1f.5: enabled 1 PCI: 00:1f.6: enabled 0 scan_static_bus for Root Device APIC_CLUSTER: 0 enabled Finding PCI configuration type. PCI: Using configuration type 1 PCI_DOMAIN: 0000 enabled PCI_DOMAIN: 0000 scanning... PCI: pci_scan_bus for bus 00 PCI: 00:00.0 [8086/7124] ops PCI: 00:00.0 [8086/7124] enabled PCI: 00:01.0 [8086/7125] enabled PCI: 00:1e.0 [8086/244e] bus ops PCI: 00:1e.0 [8086/244e] enabled PCI: 00:1f.0 [8086/2440] bus ops PCI: 00:1f.0 [8086/2440] enabled PCI: 00:1f.1 [8086/244b] ops PCI: 00:1f.1 [8086/244b] enabled PCI: 00:1f.2 [8086/2442] ops PCI: 00:1f.2 [8086/2442] enabled PCI: 00:1f.3 [8086/2443] enabled PCI: 00:1f.4 [8086/2444] ops PCI: 00:1f.4 [8086/2444] enabled PCI: 00:1f.5 [8086/2445] ops PCI: 00:1f.5 [8086/2445] enabled do_pci_scan_bridge for PCI: 00:1e.0 malloc Enter, size 24, free_mem_ptr 00120000 malloc 00120000 PCI: pci_scan_bus for bus 01 malloc Enter, size 68, free_mem_ptr 00120018 malloc 00120018 PCI: 01:08.0 [8086/2449] ops PCI: 01:08.0 [8086/2449] enabled PCI: pci_scan_bus returning with max=001 do_pci_scan_bridge returns max 1 scan_static_bus for PCI: 00:1f.0 Found SMSC Super I/O (ID=0xff, rev=0xff) PNP: 002e.0 enabled PNP: 002e.3 enabled PNP: 002e.4 enabled PNP: 002e.5 disabled PNP: 002e.7 enabled PNP: 002e.9 disabled PNP: 002e.a enabled PNP: 002e.b disabled scan_static_bus for PCI: 00:1f.0 done PCI: pci_scan_bus returning with max=001 scan_static_bus for Root Device done done Setting up VGA for PCI: 00:01.0 Setting PCI_BRIDGE_CTL_VGA for bridge PCI_DOMAIN: 0000 Setting PCI_BRIDGE_CTL_VGA for bridge Root Device Allocating resources... Reading resources... Root Device read_resources bus 0 link: 0 APIC_CLUSTER: 0 read_resources bus 0 link: 0 APIC: 00 missing read_resources APIC_CLUSTER: 0 read_resources bus 0 link: 0 done malloc Enter, size 2560, free_mem_ptr 0012005c malloc 0012005c PCI_DOMAIN: 0000 read_resources bus 0 link: 0 PCI: 00:1e.0 read_resources bus 1 link: 0 PCI: 00:1e.0 read_resources bus 1 link: 0 done PCI: 00:1f.0 read_resources bus 0 link: 0 PNP: 002e.0 missing read_resources PNP: 002e.3 missing read_resources PNP: 002e.4 missing read_resources PNP: 002e.7 missing read_resources PNP: 002e.a missing read_resources PCI: 00:1f.0 read_resources bus 0 link: 0 done PCI_DOMAIN: 0000 read_resources bus 0 link: 0 done Root Device read_resources bus 0 link: 0 done Done reading resources. Show resources in subtree (Root Device)...After reading. Root Device child on link 0 APIC_CLUSTER: 0 APIC_CLUSTER: 0 child on link 0 APIC: 00 APIC: 00 PCI_DOMAIN: 0000 child on link 0 PCI: 00:00.0 PCI_DOMAIN: 0000 resource base 0 size 0 align 0 gran 0 limit ffff flags 40040100 index 10000000 PCI_DOMAIN: 0000 resource base 0 size 0 align 0 gran 0 limit ffffffff flags 40040200 index 10000100 PCI: 00:00.0 PCI: 00:01.0 PCI: 00:01.0 resource base 0 size 4000000 align 26 gran 26 limit ffffffff flags 1200 index 10 PCI: 00:01.0 resource base 0 size 80000 align 19 gran 19 limit ffffffff flags 200 index 14 PCI: 00:1e.0 child on link 0 PCI: 01:08.0 PCI: 00:1e.0 resource base 0 size 0 align 12 gran 12 limit ffff flags 80102 index 1c PCI: 00:1e.0 resource base 0 size 0 align 20 gran 20 limit ffffffff flags 81202 index 24 PCI: 00:1e.0 resource base 0 size 0 align 20 gran 20 limit ffffffff flags 80202 index 20 PCI: 01:08.0 PCI: 01:08.0 resource base 0 size 1000 align 12 gran 12 limit ffffffff flags 200 index 10 PCI: 01:08.0 resource base 0 size 40 align 6 gran 6 limit ffff flags 100 index 14 PCI: 00:1f.0 child on link 0 PNP: 002e.0 PCI: 00:1f.0 resource base 0 size 1000 align 0 gran 0 limit 0 flags c0040100 index 10000000 PCI: 00:1f.0 resource base ff800000 size 800000 align 0 gran 0 limit 0 flags c0040200 index 10000100 PCI: 00:1f.0 resource base fec00000 size 1000 align 0 gran 0 limit 0 flags c0000200 index 3 PNP: 002e.0 PNP: 002e.0 resource base 3f0 size 0 align 0 gran 0 limit 0 flags c0000100 index 60 PNP: 002e.0 resource base 6 size 0 align 0 gran 0 limit 0 flags c0000400 index 70 PNP: 002e.0 resource base 2 size 0 align 0 gran 0 limit 0 flags c0000800 index 74 PNP: 002e.3 PNP: 002e.3 resource base 378 size 0 align 0 gran 0 limit 0 flags c0000100 index 60 PNP: 002e.3 resource base 7 size 0 align 0 gran 0 limit 0 flags c0000400 index 70 PNP: 002e.3 resource base 4 size 0 align 0 gran 0 limit 0 flags c0000800 index 74 PNP: 002e.4 PNP: 002e.4 resource base 3f8 size 0 align 0 gran 0 limit 0 flags c0000100 index 60 PNP: 002e.4 resource base 4 size 0 align 0 gran 0 limit 0 flags c0000400 index 70 PNP: 002e.5 PNP: 002e.7 PNP: 002e.7 resource base 1 size 0 align 0 gran 0 limit 0 flags c0000400 index 70 PNP: 002e.7 resource base c size 0 align 0 gran 0 limit 0 flags c0000400 index 72 PNP: 002e.9 PNP: 002e.a PNP: 002e.a resource base 800 size 0 align 0 gran 0 limit 0 flags c0000100 index 60 PNP: 002e.b PCI: 00:1f.1 PCI: 00:1f.1 resource base 0 size 10 align 4 gran 4 limit ffff flags 100 index 20 PCI: 00:1f.2 PCI: 00:1f.2 resource base 0 size 20 align 5 gran 5 limit ffff flags 100 index 20 PCI: 00:1f.3 PCI: 00:1f.3 resource base 0 size 10 align 4 gran 4 limit ffff flags 100 index 20 PCI: 00:1f.4 PCI: 00:1f.4 resource base 0 size 20 align 5 gran 5 limit ffff flags 100 index 20 PCI: 00:1f.5 PCI: 00:1f.5 resource base 0 size 100 align 8 gran 8 limit ffff flags 100 index 10 PCI: 00:1f.5 resource base 0 size 40 align 6 gran 6 limit ffff flags 100 index 14 PCI: 00:1f.6 PCI_DOMAIN: 0000 compute_resources_io: base: 0 size: 0 align: 0 gran: 0 limit: ffff PCI: 00:1e.0 compute_resources_io: base: 0 size: 0 align: 12 gran: 12 limit: ffff PCI: 01:08.0 14 * [0x0 - 0x3f] io PCI: 00:1e.0 compute_resources_io: base: 40 size: 1000 align: 12 gran: 12 limit: ffff done PCI: 00:1e.0 1c * [0x0 - 0xfff] io PCI: 00:1f.5 10 * [0x1000 - 0x10ff] io PCI: 00:1f.5 14 * [0x1400 - 0x143f] io PCI: 00:1f.2 20 * [0x1440 - 0x145f] io PCI: 00:1f.4 20 * [0x1460 - 0x147f] io PCI: 00:1f.1 20 * [0x1480 - 0x148f] io PCI: 00:1f.3 20 * [0x1490 - 0x149f] io PCI_DOMAIN: 0000 compute_resources_io: base: 14a0 size: 14a0 align: 12 gran: 0 limit: ffff done PCI_DOMAIN: 0000 compute_resources_mem: base: 0 size: 0 align: 0 gran: 0 limit: ffffffff PCI: 00:1e.0 compute_resources_prefmem: base: 0 size: 0 align: 20 gran: 20 limit: ffffffff PCI: 00:1e.0 compute_resources_prefmem: base: 0 size: 0 align: 20 gran: 20 limit: ffffffff done PCI: 00:1e.0 compute_resources_mem: base: 0 size: 0 align: 20 gran: 20 limit: ffffffff PCI: 01:08.0 10 * [0x0 - 0xfff] mem PCI: 00:1e.0 compute_resources_mem: base: 1000 size: 100000 align: 20 gran: 20 limit: ffffffff done PCI: 00:01.0 10 * [0x0 - 0x3ffffff] prefmem PCI: 00:1e.0 20 * [0x4000000 - 0x40fffff] mem PCI: 00:01.0 14 * [0x4100000 - 0x417ffff] mem PCI_DOMAIN: 0000 compute_resources_mem: base: 4180000 size: 4180000 align: 26 gran: 0 limit: ffffffff done avoid_fixed_resources: PCI_DOMAIN: 0000 avoid_fixed_resources:@PCI_DOMAIN: 0000 10000000 limit 0000ffff avoid_fixed_resources:@PCI_DOMAIN: 0000 10000100 limit ffffffff constrain_resources: PCI_DOMAIN: 0000 constrain_resources: PCI: 00:00.0 constrain_resources: PCI: 00:01.0 constrain_resources: PCI: 00:1e.0 constrain_resources: PCI: 01:08.0 constrain_resources: PCI: 00:1f.0 constrain_resources: PNP: 002e.0 skipping PNP: 002e.0@60 fixed resource, size=0! skipping PNP: 002e.0@70 fixed resource, size=0! skipping PNP: 002e.0@74 fixed resource, size=0! constrain_resources: PNP: 002e.3 skipping PNP: 002e.3@60 fixed resource, size=0! skipping PNP: 002e.3@70 fixed resource, size=0! skipping PNP: 002e.3@74 fixed resource, size=0! constrain_resources: PNP: 002e.4 skipping PNP: 002e.4@60 fixed resource, size=0! skipping PNP: 002e.4@70 fixed resource, size=0! constrain_resources: PNP: 002e.7 skipping PNP: 002e.7@70 fixed resource, size=0! skipping PNP: 002e.7@72 fixed resource, size=0! constrain_resources: PNP: 002e.a skipping PNP: 002e.a@60 fixed resource, size=0! constrain_resources: PCI: 00:1f.1 constrain_resources: PCI: 00:1f.2 constrain_resources: PCI: 00:1f.3 constrain_resources: PCI: 00:1f.4 constrain_resources: PCI: 00:1f.5 avoid_fixed_resources2: PCI_DOMAIN: 0000@10000000 limit 0000ffff lim->base 00001000 lim->limit 0000ffff avoid_fixed_resources2: PCI_DOMAIN: 0000@10000100 limit ffffffff lim->base 00000000 lim->limit febfffff Setting resources... PCI_DOMAIN: 0000 allocate_resources_io: base:1000 size:14a0 align:12 gran:0 limit:ffff Assigned: PCI: 00:1e.0 1c * [0x1000 - 0x1fff] io Assigned: PCI: 00:1f.5 10 * [0x2000 - 0x20ff] io Assigned: PCI: 00:1f.5 14 * [0x2400 - 0x243f] io Assigned: PCI: 00:1f.2 20 * [0x2440 - 0x245f] io Assigned: PCI: 00:1f.4 20 * [0x2460 - 0x247f] io Assigned: PCI: 00:1f.1 20 * [0x2480 - 0x248f] io Assigned: PCI: 00:1f.3 20 * [0x2490 - 0x249f] io PCI_DOMAIN: 0000 allocate_resources_io: next_base: 24a0 size: 14a0 align: 12 gran: 0 done PCI: 00:1e.0 allocate_resources_io: base:1000 size:1000 align:12 gran:12 limit:ffff Assigned: PCI: 01:08.0 14 * [0x1000 - 0x103f] io PCI: 00:1e.0 allocate_resources_io: next_base: 1040 size: 1000 align: 12 gran: 12 done PCI_DOMAIN: 0000 allocate_resources_mem: base:f8000000 size:4180000 align:26 gran:0 limit:febfffff Assigned: PCI: 00:01.0 10 * [0xf8000000 - 0xfbffffff] prefmem Assigned: PCI: 00:1e.0 20 * [0xfc000000 - 0xfc0fffff] mem Assigned: PCI: 00:01.0 14 * [0xfc100000 - 0xfc17ffff] mem PCI_DOMAIN: 0000 allocate_resources_mem: next_base: fc180000 size: 4180000 align: 26 gran: 0 done PCI: 00:1e.0 allocate_resources_prefmem: base:febfffff size:0 align:20 gran:20 limit:febfffff PCI: 00:1e.0 allocate_resources_prefmem: next_base: febfffff size: 0 align: 20 gran: 20 done PCI: 00:1e.0 allocate_resources_mem: base:fc000000 size:100000 align:20 gran:20 limit:febfffff Assigned: PCI: 01:08.0 10 * [0xfc000000 - 0xfc000fff] mem PCI: 00:1e.0 allocate_resources_mem: next_base: fc001000 size: 100000 align: 20 gran: 20 done Root Device assign_resources, bus 0 link: 0 Setting RAM size to 256 MB Allocating 1MB RAM for VGA PCI_DOMAIN: 0000 assign_resources, bus 0 link: 0 PCI: 00:01.0 10 <- [0x00f8000000 - 0x00fbffffff] size 0x04000000 gran 0x1a prefmem PCI: 00:01.0 14 <- [0x00fc100000 - 0x00fc17ffff] size 0x00080000 gran 0x13 mem PCI: 00:1e.0 1c <- [0x0000001000 - 0x0000001fff] size 0x00001000 gran 0x0c bus 01 io PCI: 00:1e.0 24 <- [0x00febfffff - 0x00febffffe] size 0x00000000 gran 0x14 bus 01 prefmem PCI: 00:1e.0 20 <- [0x00fc000000 - 0x00fc0fffff] size 0x00100000 gran 0x14 bus 01 mem PCI: 00:1e.0 assign_resources, bus 1 link: 0 PCI: 01:08.0 10 <- [0x00fc000000 - 0x00fc000fff] size 0x00001000 gran 0x0c mem PCI: 01:08.0 14 <- [0x0000001000 - 0x000000103f] size 0x00000040 gran 0x06 io PCI: 00:1e.0 assign_resources, bus 1 link: 0 PCI: 00:1f.0 assign_resources, bus 0 link: 0 PNP: 002e.0 missing set_resources PNP: 002e.3 missing set_resources PNP: 002e.4 missing set_resources PNP: 002e.7 missing set_resources PNP: 002e.a missing set_resources PCI: 00:1f.0 assign_resources, bus 0 link: 0 PCI: 00:1f.1 20 <- [0x0000002480 - 0x000000248f] size 0x00000010 gran 0x04 io PCI: 00:1f.2 20 <- [0x0000002440 - 0x000000245f] size 0x00000020 gran 0x05 io PCI: 00:1f.3 20 <- [0x0000002490 - 0x000000249f] size 0x00000010 gran 0x04 io PCI: 00:1f.4 20 <- [0x0000002460 - 0x000000247f] size 0x00000020 gran 0x05 io PCI: 00:1f.5 10 <- [0x0000002000 - 0x00000020ff] size 0x00000100 gran 0x08 io PCI: 00:1f.5 14 <- [0x0000002400 - 0x000000243f] size 0x00000040 gran 0x06 io PCI_DOMAIN: 0000 assign_resources, bus 0 link: 0 Root Device assign_resources, bus 0 link: 0 Done setting resources. Show resources in subtree (Root Device)...After assigning values. Root Device child on link 0 APIC_CLUSTER: 0 APIC_CLUSTER: 0 child on link 0 APIC: 00 APIC: 00 PCI_DOMAIN: 0000 child on link 0 PCI: 00:00.0 PCI_DOMAIN: 0000 resource base 1000 size 14a0 align 12 gran 0 limit ffff flags 40040100 index 10000000 PCI_DOMAIN: 0000 resource base f8000000 size 4180000 align 26 gran 0 limit febfffff flags 40040200 index 10000100 PCI_DOMAIN: 0000 resource base 0 size a0000 align 0 gran 0 limit 0 flags e0004200 index a PCI_DOMAIN: 0000 resource base c0000 size fe40000 align 0 gran 0 limit 0 flags e0004200 index b PCI: 00:00.0 PCI: 00:01.0 PCI: 00:01.0 resource base f8000000 size 4000000 align 26 gran 26 limit febfffff flags 60001200 index 10 PCI: 00:01.0 resource base fc100000 size 80000 align 19 gran 19 limit febfffff flags 60000200 index 14 PCI: 00:1e.0 child on link 0 PCI: 01:08.0 PCI: 00:1e.0 resource base 1000 size 1000 align 12 gran 12 limit ffff flags 60080102 index 1c PCI: 00:1e.0 resource base febfffff size 0 align 20 gran 20 limit febfffff flags 60081202 index 24 PCI: 00:1e.0 resource base fc000000 size 100000 align 20 gran 20 limit febfffff flags 60080202 index 20 PCI: 01:08.0 PCI: 01:08.0 resource base fc000000 size 1000 align 12 gran 12 limit febfffff flags 60000200 index 10 PCI: 01:08.0 resource base 1000 size 40 align 6 gran 6 limit ffff flags 60000100 index 14 PCI: 00:1f.0 child on link 0 PNP: 002e.0 PCI: 00:1f.0 resource base 0 size 1000 align 0 gran 0 limit 0 flags c0040100 index 10000000 PCI: 00:1f.0 resource base ff800000 size 800000 align 0 gran 0 limit 0 flags c0040200 index 10000100 PCI: 00:1f.0 resource base fec00000 size 1000 align 0 gran 0 limit 0 flags c0000200 index 3 PNP: 002e.0 PNP: 002e.0 resource base 3f0 size 0 align 0 gran 0 limit 0 flags c0000100 index 60 PNP: 002e.0 resource base 6 size 0 align 0 gran 0 limit 0 flags c0000400 index 70 PNP: 002e.0 resource base 2 size 0 align 0 gran 0 limit 0 flags c0000800 index 74 PNP: 002e.3 PNP: 002e.3 resource base 378 size 0 align 0 gran 0 limit 0 flags c0000100 index 60 PNP: 002e.3 resource base 7 size 0 align 0 gran 0 limit 0 flags c0000400 index 70 PNP: 002e.3 resource base 4 size 0 align 0 gran 0 limit 0 flags c0000800 index 74 PNP: 002e.4 PNP: 002e.4 resource base 3f8 size 0 align 0 gran 0 limit 0 flags c0000100 index 60 PNP: 002e.4 resource base 4 size 0 align 0 gran 0 limit 0 flags c0000400 index 70 PNP: 002e.5 PNP: 002e.7 PNP: 002e.7 resource base 1 size 0 align 0 gran 0 limit 0 flags c0000400 index 70 PNP: 002e.7 resource base c size 0 align 0 gran 0 limit 0 flags c0000400 index 72 PNP: 002e.9 PNP: 002e.a PNP: 002e.a resource base 800 size 0 align 0 gran 0 limit 0 flags c0000100 index 60 PNP: 002e.b PCI: 00:1f.1 PCI: 00:1f.1 resource base 2480 size 10 align 4 gran 4 limit ffff flags 60000100 index 20 PCI: 00:1f.2 PCI: 00:1f.2 resource base 2440 size 20 align 5 gran 5 limit ffff flags 60000100 index 20 PCI: 00:1f.3 PCI: 00:1f.3 resource base 2490 size 10 align 4 gran 4 limit ffff flags 60000100 index 20 PCI: 00:1f.4 PCI: 00:1f.4 resource base 2460 size 20 align 5 gran 5 limit ffff flags 60000100 index 20 PCI: 00:1f.5 PCI: 00:1f.5 resource base 2000 size 100 align 8 gran 8 limit ffff flags 60000100 index 10 PCI: 00:1f.5 resource base 2400 size 40 align 6 gran 6 limit ffff flags 60000100 index 14 PCI: 00:1f.6 Done allocating resources. Enabling resources... PCI: 00:00.0 cmd <- 06 PCI: 00:01.0 subsystem <- 8086/00 PCI: 00:01.0 cmd <- 07 PCI: 00:1e.0 bridge ctrl <- 0003 PCI: 00:1e.0 cmd <- 07 PCI: 01:08.0 cmd <- 03 PCI: 00:1f.0 cmd <- 0f PNP: 002e.0 missing enable_resources PNP: 002e.3 missing enable_resources PNP: 002e.4 missing enable_resources PNP: 002e.7 missing enable_resources PNP: 002e.a missing enable_resources PCI: 00:1f.1 cmd <- 01 PCI: 00:1f.2 cmd <- 01 PCI: 00:1f.3 subsystem <- 8086/00 PCI: 00:1f.3 cmd <- 01 PCI: 00:1f.4 cmd <- 01 PCI: 00:1f.5 cmd <- 01 done. Initializing devices... Root Device init APIC_CLUSTER: 0 init malloc Enter, size 68, free_mem_ptr 00120a5c malloc 00120a5c Initializing CPU #0 CPU: vendor Intel device 68a CPU: family 06, model 08, stepping 0a Enabling cache Setting fixed MTRRs(0-88) Type: UC Setting fixed MTRRs(0-16) Type: WB Setting fixed MTRRs(24-88) Type: WB DONE fixed MTRRs call enable_fixed_mtrr() Setting variable MTRR 0, base: 0MB, range: 128MB, type WB ADDRESS_MASK_HIGH=0xf Setting variable MTRR 1, base: 128MB, range: 64MB, type WB ADDRESS_MASK_HIGH=0xf Setting variable MTRR 2, base: 192MB, range: 32MB, type WB ADDRESS_MASK_HIGH=0xf Setting variable MTRR 3, base: 224MB, range: 16MB, type WB ADDRESS_MASK_HIGH=0xf Setting variable MTRR 4, base: 240MB, range: 8MB, type WB ADDRESS_MASK_HIGH=0xf Setting variable MTRR 5, base: 248MB, range: 4MB, type WB ADDRESS_MASK_HIGH=0xf Running out of variable MTRRs! Zero-sized MTRR range @0KB DONE variable MTRRs Clear out the extra MTRR's call enable_var_mtrr() Leave x86_setup_var_mtrrs MTRR check Fixed MTRRs : Enabled Variable MTRRs: Enabled microcode_info: sig = 0x0000068a pf=0x00000010 rev = 0x00000000 Disabling local apic...done. CPU #0 initialized PCI: 00:00.0 init Northbridge init PCI: 00:01.0 init Check CBFS header at fffeffe0 magic is 4f524243 Found CBFS header at fffeffe0 Check fallback/coreboot_ram CBFS: follow chain: fff80000 + 38 + 9aa7 + align -> fff89b00 Check fallback/payload CBFS: follow chain: fff89b00 + 38 + cc9b + align -> fff96800 Check pci8086,7125.rom In cbfs, rom address for PCI: 00:01.0 = fff96838 PCI Expansion ROM, signature 0xaa55, INIT size 0x8000, data ptr 0x004c PCI ROM Image, Vendor 8086, Device 7125, PCI ROM Image, Class Code 030000, Code Type 00 copying VGA ROM Image from fff96838 to 0xc0000, 0x8000 bytes Real mode stub @00000600: 606 bytes Calling Option ROM... oprom: INT# 0x15 oprom: eax: 0000d042 ebx: 0000ff10 ecx: 00000000 edx: 0000ffff oprom: ebp: 00110fe4 esp: 00000fda edi: 00000000 esi: 00000000 oprom: ip: 791b cs: c000 flags: 00000003 Unknown INT15 function d042! int15 call returned error. ... Option ROM returned. PCI: 00:1e.0 init PCI: 00:1f.0 init IOAPIC Southbridge enabled 2186 Southbridge APIC ID = 2000000 Set power on if power fails RTC Init PCI: 00:1f.1 init IDE0: Primary IDE interface is enabled IDE1: Secondary IDE interface is enabled PCI: 00:1f.2 init USB: Setting up controller.. done. PCI: 00:1f.3 init Check CBFS header at fffeffe0 magic is 4f524243 Found CBFS header at fffeffe0 Check fallback/coreboot_ram CBFS: follow chain: fff80000 + 38 + 9aa7 + align -> fff89b00 Check fallback/payload CBFS: follow chain: fff89b00 + 38 + cc9b + align -> fff96800 Check pci8086,7125.rom CBFS: follow chain: fff96800 + 38 + 8000 + align -> fff9e840 Check CBFS: follow chain: fff9e840 + 28 + 51778 + align -> ffff0000 CBFS: Could not find file pci8086,2443.rom PCI: 00:1f.4 init USB: Setting up controller.. done. Devices initialized Show all devs...After init. Root Device: enabled 1 APIC_CLUSTER: 0: enabled 1 APIC: 00: enabled 1 PCI_DOMAIN: 0000: enabled 1 PCI: 00:00.0: enabled 1 PCI: 00:01.0: enabled 1 PCI: 00:1e.0: enabled 1 PCI: 00:1f.0: enabled 1 PNP: 002e.0: enabled 1 PNP: 002e.3: enabled 1 PNP: 002e.4: enabled 1 PNP: 002e.5: enabled 0 PNP: 002e.7: enabled 1 PNP: 002e.9: enabled 0 PNP: 002e.a: enabled 1 PNP: 002e.b: enabled 0 PCI: 00:1f.1: enabled 1 PCI: 00:1f.2: enabled 1 PCI: 00:1f.3: enabled 1 PCI: 00:1f.4: enabled 1 PCI: 00:1f.5: enabled 1 PCI: 00:1f.6: enabled 0 PCI: 01:08.0: enabled 1 CPU: 00: enabled 1 Initializing CBMEM area to 0xfef0000 (65536 bytes) Adding CBMEM entry as no. 1 Moving GDT to 0fef0200...ok High Tables Base is fef0000. Copying Interrupt Routing Table to 0x000f0000... done. Adding CBMEM entry as no. 2 Copying Interrupt Routing Table to 0x0fef0400... done. PIRQ table: 144 bytes. Multiboot Information structure has been written. Adding CBMEM entry as no. 3 Writing high table forward entry at 0x00000500 Wrote coreboot table at: 00000500 - 00000518 checksum dbef New low_table_end: 0x00000518 Now going to write high coreboot table at 0x0fef1400 rom_table_end = 0x0fef1400 Adjust low_table_end from 0x00000518 to 0x00001000 Adjust rom_table_end from 0x0fef1400 to 0x0ff00000 Adding high table area coreboot memory table: 0. 0000000000000000-0000000000000fff: CONFIGURATION TABLES 1. 0000000000001000-000000000009ffff: RAM 2. 00000000000c0000-000000000feeffff: RAM 3. 000000000fef0000-000000000fefffff: CONFIGURATION TABLES Wrote coreboot table at: 0fef1400 - 0fef1580 checksum d65c coreboot table: 384 bytes. 0. FREE SPACE 0fef3400 0000cc00 1. GDT 0fef0200 00000200 2. IRQ TABLE 0fef0400 00001000 3. COREBOOT 0fef1400 00002000 Check CBFS header at fffeffe0 magic is 4f524243 Found CBFS header at fffeffe0 Check fallback/coreboot_ram CBFS: follow chain: fff80000 + 38 + 9aa7 + align -> fff89b00 Check fallback/payload Got a payload Loading segment from rom address 0xfff89b38 parameter section (skipped) Loading segment from rom address 0xfff89b54 data (compression=1) malloc Enter, size 36, free_mem_ptr 00120aa0 malloc 00120aa0 New segment dstaddr 0x100000 memsize 0x16c3d0 srcaddr 0xfff89bd8 filesize 0xcbcd (cleaned up) New segment addr 0x100000 size 0x16c3d0 offset 0xfff89bd8 filesize 0xcbcd Loading segment from rom address 0xfff89b70 data (compression=1) malloc Enter, size 36, free_mem_ptr 00120ac4 malloc 00120ac4 New segment dstaddr 0x26c3d0 memsize 0x48 srcaddr 0xfff967a5 filesize 0x2e (cleaned up) New segment addr 0x26c3d0 size 0x48 offset 0xfff967a5 filesize 0x2e Loading segment from rom address 0xfff89b8c Entry Point 0x00100000 Loading Segment: addr: 0x0000000000100000 memsz: 0x000000000016c3d0 filesz: 0x000000000000cbcd lb: [0x0000000000100000, 0x0000000000124000) segment: [0x0000000000100000, 0x000000000010cbcd, 0x000000000026c3d0) bounce: [0x000000000fd5fc30, 0x000000000fd6c7fd, 0x000000000fecc000) Post relocation: addr: 0x000000000fd5fc30 memsz: 0x000000000016c3d0 filesz: 0x000000000000cbcd using LZMA [ 0x0fd5fc30, 0fd7c790, 0x0fecc000) <- fff89bd8 Clearing Segment: addr: 0x000000000fd7c790 memsz: 0x000000000014f870 dest 0fd5fc30, end 0fecc000, bouncebuffer fd5fc30 move suffix around: from fd83c30, to 124000, amount: 1483d0 Loading Segment: addr: 0x000000000026c3d0 memsz: 0x0000000000000048 filesz: 0x000000000000002e lb: [0x0000000000100000, 0x0000000000124000) Post relocation: addr: 0x000000000026c3d0 memsz: 0x0000000000000048 filesz: 0x000000000000002e using LZMA [ 0x0026c3d0, 0026c418, 0x0026c418) <- fff967a5 dest 0026c3d0, end 0026c418, bouncebuffer fd5fc30 Loaded segments Jumping to boot code at 100000 entry = 0x00100000 lb_start = 0x00100000 lb_size = 0x00024000 adjust = 0x0fdcc000 buffer = 0x0fd5fc30 elf_boot_notes = 0x00112b98 adjusted_boot_notes = 0x0fedeb98 FILO version 0.6.0 (joe@smitty2m) Sat May 29 16:37:42 EDT 2010 00:1f.4 2444:8086.4 UHCI controller 00:1f.2 2442:8086.2 UHCI controller lowspeed device device 0x0d3d:0x0006 is USB 1.10 NOTICE: This driver defaults to using the first interface. This might be the wrong choice and lead to limited functionality of the device. Please report such a case to coreboot@coreboot.org as you might be the first. (HID) Keyboard has not supported layout (country code 00) Keyboard layout 'us' ERROR: No such CMOS option (boot_devices) Press for default menu.lst (hdc1:/grub/grub.conf), or for prompt... 5  menu: hdc1:/grub/grub.conf ERROR: No such CMOS option (boot_default) hdc: LBA 40GB: WDC WD400BB-00JHC0 File not found.ERROR: No such CMOS option (boot_default) FILO 0.6.0 lqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqkx xx xx xx xx xx xx xx xx xx xx xx xmqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqj Use the ^ and v keys to select which entry is highlighted. Press enter to boot the selected OS, 'e' to edit the commands before booting, 'a' to modify the kernel arguments before booting, or 'c' for a command-line. Fedora (2.6.27.24-170.2.68.fc10.i686) x Fedora (2.6.27.5-117.fc10.i686) The highlighted entry will be booted automatically in 10 seconds. The highlighted entry will be booted automatically in 9 seconds. The highlighted entry will be booted automatically in 8 seconds. The highlighted entry will be booted automatically in 7 seconds. The highlighted entry will be booted automatically in 6 seconds. The highlighted entry will be booted automatically in 5 seconds. The highlighted entry will be booted automatically in 4 seconds. The highlighted entry will be booted automatically in 3 seconds. The highlighted entry will be booted automatically in 2 seconds. The highlighted entry will be booted automatically in 1 seconds. Booting 'Fedora (2.6.27.24-170.2.68.fc10.i686)' root (hd2,0)kernel /vmlinuz-2.6.27.24-170.2.68.fc10.i686 ro root=/dev/VolGroup00/LogVol00 rhgb quiet 3initrd /initrd-2.6.27.24-170.2.68.fc10.i686.img Booting 'Fedora (2.6.27.24-170.2.68.fc10.i686)' root (hd2,0) kernel /vmlinuz-2.6.27.24-170.2.68.fc10.i686 ro root=/dev/VolGroup00/LogVol00 r hgb quiet 3 initrd /initrd-2.6.27.24-170.2.68.fc10.i686.img Booting 'hdc1:/vmlinuz-2.6.27.24-170.2.68.fc10.i686 ro root=/dev/VolGroup00/Log Vol00 rhgb quiet 3 initrd=hdc1:/initrd-2.6.27.24-170.2.68.fc10.i686.img' Found Linux version 2.6.27.24-170.2.68.fc10.i686 (mockbuild@x86-4.fedora.phx.redhat.com) #1 SMP Wed May 20 23:10:16 EDT 2009 bzImage.Loading kernel... okLoading initrd... okJumping to entry point... coreboot-4.0-r5627M Fri Jun 11 00:40:22 EDT 2010 starting... SMBus controller enabled Found DIMM in slot 00 DIMM is 0x80MB After translation, dimm_size is 0x0d Found DIMM in slot 01 DIMM is 0x80MB After translation, dimm_size is 0x0d DRP calculated to 0xdd BUFF_SC calculated to 0x55c6 Loading stage image. Check CBFS header at fffeffe0 magic is 4f524243 Found CBFS header at fffeffe0 Check fallback/coreboot_ram Stage: loading fallback/coreboot_ram @ 0x100000 (147456 bytes), entry @ 0x100000 Stage: done loading. Jumping to image. coreboot-4.0-r5627M Fri Jun 11 00:40:22 EDT 2010 booting... Calibrating delay loop... end 88727718, start 2e2b573c 32-bit delta 1444 calibrate_tsc 32-bit result is 1444 clocks_per_usec: 1444 Enumerating buses... Show all devs...Before Device Enumeration. Root Device: enabled 1 APIC_CLUSTER: 0: enabled 1 APIC: 00: enabled 1 PCI_DOMAIN: 0000: enabled 1 PCI: 00:00.0: enabled 1 PCI: 00:01.0: enabled 1 PCI: 00:1e.0: enabled 1 PCI: 00:1f.0: enabled 1 PNP: 002e.0: enabled 1 PNP: 002e.3: enabled 1 PNP: 002e.4: enabled 1 PNP: 002e.5: enabled 0 PNP: 002e.7: enabled 1 PNP: 002e.9: enabled 0 PNP: 002e.a: enabled 1 PNP: 002e.b: enabled 0 PCI: 00:1f.1: enabled 1 PCI: 00:1f.2: enabled 1 PCI: 00:1f.3: enabled 1 PCI: 00:1f.4: enabled 1 PCI: 00:1f.5: enabled 1 PCI: 00:1f.6: enabled 0 Compare with tree... Root Device: enabled 1 APIC_CLUSTER: 0: enabled 1 APIC: 00: enabled 1 PCI_DOMAIN: 0000: enabled 1 PCI: 00:00.0: enabled 1 PCI: 00:01.0: enabled 1 PCI: 00:1e.0: enabled 1 PCI: 00:1f.0: enabled 1 PNP: 002e.0: enabled 1 PNP: 002e.3: enabled 1 PNP: 002e.4: enabled 1 PNP: 002e.5: enabled 0 PNP: 002e.7: enabled 1 PNP: 002e.9: enabled 0 PNP: 002e.a: enabled 1 PNP: 002e.b: enabled 0 PCI: 00:1f.1: enabled 1 PCI: 00:1f.2: enabled 1 PCI: 00:1f.3: enabled 1 PCI: 00:1f.4: enabled 1 PCI: 00:1f.5: enabled 1 PCI: 00:1f.6: enabled 0 scan_static_bus for Root Device APIC_CLUSTER: 0 enabled Finding PCI configuration type. PCI: Using configuration type 1 PCI_DOMAIN: 0000 enabled PCI_DOMAIN: 0000 scanning... PCI: pci_scan_bus for bus 00 PCI: 00:00.0 [8086/7124] ops PCI: 00:00.0 [8086/7124] enabled PCI: 00:01.0 [8086/7125] enabled PCI: 00:1e.0 [8086/244e] bus ops PCI: 00:1e.0 [8086/244e] enabled PCI: 00:1f.0 [8086/2440] bus ops PCI: 00:1f.0 [8086/2440] enabled PCI: 00:1f.1 [8086/244b] ops PCI: 00:1f.1 [8086/244b] enabled PCI: 00:1f.2 [8086/2442] ops PCI: 00:1f.2 [8086/2442] enabled PCI: 00:1f.3 [8086/2443] enabled PCI: 00:1f.4 [8086/2444] ops PCI: 00:1f.4 [8086/2444] enabled PCI: 00:1f.5 [8086/2445] ops PCI: 00:1f.5 [8086/2445] enabled do_pci_scan_bridge for PCI: 00:1e.0 malloc Enter, size 24, free_mem_ptr 00120000 malloc 00120000 PCI: pci_scan_bus for bus 01 malloc Enter, size 68, free_mem_ptr 00120018 malloc 00120018 PCI: 01:08.0 [8086/2449] ops PCI: 01:08.0 [8086/2449] enabled PCI: pci_scan_bus returning with max=001 do_pci_scan_bridge returns max 1 scan_static_bus for PCI: 00:1f.0 Found SMSC Super I/O (ID=0xff, rev=0xff) PNP: 002e.0 enabled PNP: 002e.3 enabled PNP: 002e.4 enabled PNP: 002e.5 disabled PNP: 002e.7 enabled PNP: 002e.9 disabled PNP: 002e.a enabled PNP: 002e.b disabled scan_static_bus for PCI: 00:1f.0 done PCI: pci_scan_bus returning with max=001 scan_static_bus for Root Device done done Setting up VGA for PCI: 00:01.0 Setting PCI_BRIDGE_CTL_VGA for bridge PCI_DOMAIN: 0000 Setting PCI_BRIDGE_CTL_VGA for bridge Root Device Allocating resources... Reading resources... Root Device read_resources bus 0 link: 0 APIC_CLUSTER: 0 read_resources bus 0 link: 0 APIC: 00 missing read_resources APIC_CLUSTER: 0 read_resources bus 0 link: 0 done malloc Enter, size 2560, free_mem_ptr 0012005c malloc 0012005c PCI_DOMAIN: 0000 read_resources bus 0 link: 0 PCI: 00:1e.0 read_resources bus 1 link: 0 PCI: 00:1e.0 read_resources bus 1 link: 0 done PCI: 00:1f.0 read_resources bus 0 link: 0 PNP: 002e.0 missing read_resources PNP: 002e.3 missing read_resources PNP: 002e.4 missing read_resources PNP: 002e.7 missing read_resources PNP: 002e.a missing read_resources PCI: 00:1f.0 read_resources bus 0 link: 0 done PCI_DOMAIN: 0000 read_resources bus 0 link: 0 done Root Device read_resources bus 0 link: 0 done Done reading resources. Show resources in subtree (Root Device)...After reading. Root Device child on link 0 APIC_CLUSTER: 0 APIC_CLUSTER: 0 child on link 0 APIC: 00 APIC: 00 PCI_DOMAIN: 0000 child on link 0 PCI: 00:00.0 PCI_DOMAIN: 0000 resource base 0 size 0 align 0 gran 0 limit ffff flags 40040100 index 10000000 PCI_DOMAIN: 0000 resource base 0 size 0 align 0 gran 0 limit ffffffff flags 40040200 index 10000100 PCI: 00:00.0 PCI: 00:01.0 PCI: 00:01.0 resource base 0 size 4000000 align 26 gran 26 limit ffffffff flags 1200 index 10 PCI: 00:01.0 resource base 0 size 80000 align 19 gran 19 limit ffffffff flags 200 index 14 PCI: 00:1e.0 child on link 0 PCI: 01:08.0 PCI: 00:1e.0 resource base 0 size 0 align 12 gran 12 limit ffff flags 80102 index 1c PCI: 00:1e.0 resource base 0 size 0 align 20 gran 20 limit ffffffff flags 81202 index 24 PCI: 00:1e.0 resource base 0 size 0 align 20 gran 20 limit ffffffff flags 80202 index 20 PCI: 01:08.0 PCI: 01:08.0 resource base 0 size 1000 align 12 gran 12 limit ffffffff flags 200 index 10 PCI: 01:08.0 resource base 0 size 40 align 6 gran 6 limit ffff flags 100 index 14 PCI: 00:1f.0 child on link 0 PNP: 002e.0 PCI: 00:1f.0 resource base 0 size 1000 align 0 gran 0 limit 0 flags c0040100 index 10000000 PCI: 00:1f.0 resource base ff800000 size 800000 align 0 gran 0 limit 0 flags c0040200 index 10000100 PCI: 00:1f.0 resource base fec00000 size 1000 align 0 gran 0 limit 0 flags c0000200 index 3 PNP: 002e.0 PNP: 002e.0 resource base 3f0 size 0 align 0 gran 0 limit 0 flags c0000100 index 60 PNP: 002e.0 resource base 6 size 0 align 0 gran 0 limit 0 flags c0000400 index 70 PNP: 002e.0 resource base 2 size 0 align 0 gran 0 limit 0 flags c0000800 index 74 PNP: 002e.3 PNP: 002e.3 resource base 378 size 0 align 0 gran 0 limit 0 flags c0000100 index 60 PNP: 002e.3 resource base 7 size 0 align 0 gran 0 limit 0 flags c0000400 index 70 PNP: 002e.3 resource base 4 size 0 align 0 gran 0 limit 0 flags c0000800 index 74 PNP: 002e.4 PNP: 002e.4 resource base 3f8 size 0 align 0 gran 0 limit 0 flags c0000100 index 60 PNP: 002e.4 resource base 4 size 0 align 0 gran 0 limit 0 flags c0000400 index 70 PNP: 002e.5 PNP: 002e.7 PNP: 002e.7 resource base 1 size 0 align 0 gran 0 limit 0 flags c0000400 index 70 PNP: 002e.7 resource base c size 0 align 0 gran 0 limit 0 flags c0000400 index 72 PNP: 002e.9 PNP: 002e.a PNP: 002e.a resource base 800 size 0 align 0 gran 0 limit 0 flags c0000100 index 60 PNP: 002e.b PCI: 00:1f.1 PCI: 00:1f.1 resource base 0 size 10 align 4 gran 4 limit ffff flags 100 index 20 PCI: 00:1f.2 PCI: 00:1f.2 resource base 0 size 20 align 5 gran 5 limit ffff flags 100 index 20 PCI: 00:1f.3 PCI: 00:1f.3 resource base 0 size 10 align 4 gran 4 limit ffff flags 100 index 20 PCI: 00:1f.4 PCI: 00:1f.4 resource base 0 size 20 align 5 gran 5 limit ffff flags 100 index 20 PCI: 00:1f.5 PCI: 00:1f.5 resource base 0 size 100 align 8 gran 8 limit ffff flags 100 index 10 PCI: 00:1f.5 resource base 0 size 40 align 6 gran 6 limit ffff flags 100 index 14 PCI: 00:1f.6 PCI_DOMAIN: 0000 compute_resources_io: base: 0 size: 0 align: 0 gran: 0 limit: ffff PCI: 00:1e.0 compute_resources_io: base: 0 size: 0 align: 12 gran: 12 limit: ffff PCI: 01:08.0 14 * [0x0 - 0x3f] io PCI: 00:1e.0 compute_resources_io: base: 40 size: 1000 align: 12 gran: 12 limit: ffff done PCI: 00:1e.0 1c * [0x0 - 0xfff] io PCI: 00:1f.5 10 * [0x1000 - 0x10ff] io PCI: 00:1f.5 14 * [0x1400 - 0x143f] io PCI: 00:1f.2 20 * [0x1440 - 0x145f] io PCI: 00:1f.4 20 * [0x1460 - 0x147f] io PCI: 00:1f.1 20 * [0x1480 - 0x148f] io PCI: 00:1f.3 20 * [0x1490 - 0x149f] io PCI_DOMAIN: 0000 compute_resources_io: base: 14a0 size: 14a0 align: 12 gran: 0 limit: ffff done PCI_DOMAIN: 0000 compute_resources_mem: base: 0 size: 0 align: 0 gran: 0 limit: ffffffff PCI: 00:1e.0 compute_resources_prefmem: base: 0 size: 0 align: 20 gran: 20 limit: ffffffff PCI: 00:1e.0 compute_resources_prefmem: base: 0 size: 0 align: 20 gran: 20 limit: ffffffff done PCI: 00:1e.0 compute_resources_mem: base: 0 size: 0 align: 20 gran: 20 limit: ffffffff PCI: 01:08.0 10 * [0x0 - 0xfff] mem PCI: 00:1e.0 compute_resources_mem: base: 1000 size: 100000 align: 20 gran: 20 limit: ffffffff done PCI: 00:01.0 10 * [0x0 - 0x3ffffff] prefmem PCI: 00:1e.0 20 * [0x4000000 - 0x40fffff] mem PCI: 00:01.0 14 * [0x4100000 - 0x417ffff] mem PCI_DOMAIN: 0000 compute_resources_mem: base: 4180000 size: 4180000 align: 26 gran: 0 limit: ffffffff done avoid_fixed_resources: PCI_DOMAIN: 0000 avoid_fixed_resources:@PCI_DOMAIN: 0000 10000000 limit 0000ffff avoid_fixed_resources:@PCI_DOMAIN: 0000 10000100 limit ffffffff constrain_resources: PCI_DOMAIN: 0000 constrain_resources: PCI: 00:00.0 constrain_resources: PCI: 00:01.0 constrain_resources: PCI: 00:1e.0 constrain_resources: PCI: 01:08.0 constrain_resources: PCI: 00:1f.0 constrain_resources: PNP: 002e.0 skipping PNP: 002e.0@60 fixed resource, size=0! skipping PNP: 002e.0@70 fixed resource, size=0! skipping PNP: 002e.0@74 fixed resource, size=0! constrain_resources: PNP: 002e.3 skipping PNP: 002e.3@60 fixed resource, size=0! skipping PNP: 002e.3@70 fixed resource, size=0! skipping PNP: 002e.3@74 fixed resource, size=0! constrain_resources: PNP: 002e.4 skipping PNP: 002e.4@60 fixed resource, size=0! skipping PNP: 002e.4@70 fixed resource, size=0! constrain_resources: PNP: 002e.7 skipping PNP: 002e.7@70 fixed resource, size=0! skipping PNP: 002e.7@72 fixed resource, size=0! constrain_resources: PNP: 002e.a skipping PNP: 002e.a@60 fixed resource, size=0! constrain_resources: PCI: 00:1f.1 constrain_resources: PCI: 00:1f.2 constrain_resources: PCI: 00:1f.3 constrain_resources: PCI: 00:1f.4 constrain_resources: PCI: 00:1f.5 avoid_fixed_resources2: PCI_DOMAIN: 0000@10000000 limit 0000ffff lim->base 00001000 lim->limit 0000ffff avoid_fixed_resources2: PCI_DOMAIN: 0000@10000100 limit ffffffff lim->base 00000000 lim->limit febfffff Setting resources... PCI_DOMAIN: 0000 allocate_resources_io: base:1000 size:14a0 align:12 gran:0 limit:ffff Assigned: PCI: 00:1e.0 1c * [0x1000 - 0x1fff] io Assigned: PCI: 00:1f.5 10 * [0x2000 - 0x20ff] io Assigned: PCI: 00:1f.5 14 * [0x2400 - 0x243f] io Assigned: PCI: 00:1f.2 20 * [0x2440 - 0x245f] io Assigned: PCI: 00:1f.4 20 * [0x2460 - 0x247f] io Assigned: PCI: 00:1f.1 20 * [0x2480 - 0x248f] io Assigned: PCI: 00:1f.3 20 * [0x2490 - 0x249f] io PCI_DOMAIN: 0000 allocate_resources_io: next_base: 24a0 size: 14a0 align: 12 gran: 0 done PCI: 00:1e.0 allocate_resources_io: base:1000 size:1000 align:12 gran:12 limit:ffff Assigned: PCI: 01:08.0 14 * [0x1000 - 0x103f] io PCI: 00:1e.0 allocate_resources_io: next_base: 1040 size: 1000 align: 12 gran: 12 done PCI_DOMAIN: 0000 allocate_resources_mem: base:f8000000 size:4180000 align:26 gran:0 limit:febfffff Assigned: PCI: 00:01.0 10 * [0xf8000000 - 0xfbffffff] prefmem Assigned: PCI: 00:1e.0 20 * [0xfc000000 - 0xfc0fffff] mem Assigned: PCI: 00:01.0 14 * [0xfc100000 - 0xfc17ffff] mem PCI_DOMAIN: 0000 allocate_resources_mem: next_base: fc180000 size: 4180000 align: 26 gran: 0 done PCI: 00:1e.0 allocate_resources_prefmem: base:febfffff size:0 align:20 gran:20 limit:febfffff PCI: 00:1e.0 allocate_resources_prefmem: next_base: febfffff size: 0 align: 20 gran: 20 done PCI: 00:1e.0 allocate_resources_mem: base:fc000000 size:100000 align:20 gran:20 limit:febfffff Assigned: PCI: 01:08.0 10 * [0xfc000000 - 0xfc000fff] mem PCI: 00:1e.0 allocate_resources_mem: next_base: fc001000 size: 100000 align: 20 gran: 20 done Root Device assign_resources, bus 0 link: 0 Setting RAM size to 256 MB Allocating 1MB RAM for VGA PCI_DOMAIN: 0000 assign_resources, bus 0 link: 0 PCI: 00:01.0 10 <- [0x00f8000000 - 0x00fbffffff] size 0x04000000 gran 0x1a prefmem PCI: 00:01.0 14 <- [0x00fc100000 - 0x00fc17ffff] size 0x00080000 gran 0x13 mem PCI: 00:1e.0 1c <- [0x0000001000 - 0x0000001fff] size 0x00001000 gran 0x0c bus 01 io PCI: 00:1e.0 24 <- [0x00febfffff - 0x00febffffe] size 0x00000000 gran 0x14 bus 01 prefmem PCI: 00:1e.0 20 <- [0x00fc000000 - 0x00fc0fffff] size 0x00100000 gran 0x14 bus 01 mem PCI: 00:1e.0 assign_resources, bus 1 link: 0 PCI: 01:08.0 10 <- [0x00fc000000 - 0x00fc000fff] size 0x00001000 gran 0x0c mem PCI: 01:08.0 14 <- [0x0000001000 - 0x000000103f] size 0x00000040 gran 0x06 io PCI: 00:1e.0 assign_resources, bus 1 link: 0 PCI: 00:1f.0 assign_resources, bus 0 link: 0 PNP: 002e.0 missing set_resources PNP: 002e.3 missing set_resources PNP: 002e.4 missing set_resources PNP: 002e.7 missing set_resources PNP: 002e.a missing set_resources PCI: 00:1f.0 assign_resources, bus 0 link: 0 PCI: 00:1f.1 20 <- [0x0000002480 - 0x000000248f] size 0x00000010 gran 0x04 io PCI: 00:1f.2 20 <- [0x0000002440 - 0x000000245f] size 0x00000020 gran 0x05 io PCI: 00:1f.3 20 <- [0x0000002490 - 0x000000249f] size 0x00000010 gran 0x04 io PCI: 00:1f.4 20 <- [0x0000002460 - 0x000000247f] size 0x00000020 gran 0x05 io PCI: 00:1f.5 10 <- [0x0000002000 - 0x00000020ff] size 0x00000100 gran 0x08 io PCI: 00:1f.5 14 <- [0x0000002400 - 0x000000243f] size 0x00000040 gran 0x06 io PCI_DOMAIN: 0000 assign_resources, bus 0 link: 0 Root Device assign_resources, bus 0 link: 0 Done setting resources. Show resources in subtree (Root Device)...After assigning values. Root Device child on link 0 APIC_CLUSTER: 0 APIC_CLUSTER: 0 child on link 0 APIC: 00 APIC: 00 PCI_DOMAIN: 0000 child on link 0 PCI: 00:00.0 PCI_DOMAIN: 0000 resource base 1000 size 14a0 align 12 gran 0 limit ffff flags 40040100 index 10000000 PCI_DOMAIN: 0000 resource base f8000000 size 4180000 align 26 gran 0 limit febfffff flags 40040200 index 10000100 PCI_DOMAIN: 0000 resource base 0 size a0000 align 0 gran 0 limit 0 flags e0004200 index a PCI_DOMAIN: 0000 resource base c0000 size fe40000 align 0 gran 0 limit 0 flags e0004200 index b PCI: 00:00.0 PCI: 00:01.0 PCI: 00:01.0 resource base f8000000 size 4000000 align 26 gran 26 limit febfffff flags 60001200 index 10 PCI: 00:01.0 resource base fc100000 size 80000 align 19 gran 19 limit febfffff flags 60000200 index 14 PCI: 00:1e.0 child on link 0 PCI: 01:08.0 PCI: 00:1e.0 resource base 1000 size 1000 align 12 gran 12 limit ffff flags 60080102 index 1c PCI: 00:1e.0 resource base febfffff size 0 align 20 gran 20 limit febfffff flags 60081202 index 24 PCI: 00:1e.0 resource base fc000000 size 100000 align 20 gran 20 limit febfffff flags 60080202 index 20 PCI: 01:08.0 PCI: 01:08.0 resource base fc000000 size 1000 align 12 gran 12 limit febfffff flags 60000200 index 10 PCI: 01:08.0 resource base 1000 size 40 align 6 gran 6 limit ffff flags 60000100 index 14 PCI: 00:1f.0 child on link 0 PNP: 002e.0 PCI: 00:1f.0 resource base 0 size 1000 align 0 gran 0 limit 0 flags c0040100 index 10000000 PCI: 00:1f.0 resource base ff800000 size 800000 align 0 gran 0 limit 0 flags c0040200 index 10000100 PCI: 00:1f.0 resource base fec00000 size 1000 align 0 gran 0 limit 0 flags c0000200 index 3 PNP: 002e.0 PNP: 002e.0 resource base 3f0 size 0 align 0 gran 0 limit 0 flags c0000100 index 60 PNP: 002e.0 resource base 6 size 0 align 0 gran 0 limit 0 flags c0000400 index 70 PNP: 002e.0 resource base 2 size 0 align 0 gran 0 limit 0 flags c0000800 index 74 PNP: 002e.3 PNP: 002e.3 resource base 378 size 0 align 0 gran 0 limit 0 flags c0000100 index 60 PNP: 002e.3 resource base 7 size 0 align 0 gran 0 limit 0 flags c0000400 index 70 PNP: 002e.3 resource base 4 size 0 align 0 gran 0 limit 0 flags c0000800 index 74 PNP: 002e.4 PNP: 002e.4 resource base 3f8 size 0 align 0 gran 0 limit 0 flags c0000100 index 60 PNP: 002e.4 resource base 4 size 0 align 0 gran 0 limit 0 flags c0000400 index 70 PNP: 002e.5 PNP: 002e.7 PNP: 002e.7 resource base 1 size 0 align 0 gran 0 limit 0 flags c0000400 index 70 PNP: 002e.7 resource base c size 0 align 0 gran 0 limit 0 flags c0000400 index 72 PNP: 002e.9 PNP: 002e.a PNP: 002e.a resource base 800 size 0 align 0 gran 0 limit 0 flags c0000100 index 60 PNP: 002e.b PCI: 00:1f.1 PCI: 00:1f.1 resource base 2480 size 10 align 4 gran 4 limit ffff flags 60000100 index 20 PCI: 00:1f.2 PCI: 00:1f.2 resource base 2440 size 20 align 5 gran 5 limit ffff flags 60000100 index 20 PCI: 00:1f.3 PCI: 00:1f.3 resource base 2490 size 10 align 4 gran 4 limit ffff flags 60000100 index 20 PCI: 00:1f.4 PCI: 00:1f.4 resource base 2460 size 20 align 5 gran 5 limit ffff flags 60000100 index 20 PCI: 00:1f.5 PCI: 00:1f.5 resource base 2000 size 100 align 8 gran 8 limit ffff flags 60000100 index 10 PCI: 00:1f.5 resource base 2400 size 40 align 6 gran 6 limit ffff flags 60000100 index 14 PCI: 00:1f.6 Done allocating resources. Enabling resources... PCI: 00:00.0 cmd <- 06 PCI: 00:01.0 subsystem <- 8086/00 PCI: 00:01.0 cmd <- 07 PCI: 00:1e.0 bridge ctrl <- 0003 PCI: 00:1e.0 cmd <- 07 PCI: 01:08.0 cmd <- 03 PCI: 00:1f.0 cmd <- 0f PNP: 002e.0 missing enable_resources PNP: 002e.3 missing enable_resources PNP: 002e.4 missing enable_resources PNP: 002e.7 missing enable_resources PNP: 002e.a missing enable_resources PCI: 00:1f.1 cmd <- 01 PCI: 00:1f.2 cmd <- 01 PCI: 00:1f.3 subsystem <- 8086/00 PCI: 00:1f.3 cmd <- 01 PCI: 00:1f.4 cmd <- 01 PCI: 00:1f.5 cmd <- 01 done. Initializing devices... Root Device init APIC_CLUSTER: 0 init malloc Enter, size 68, free_mem_ptr 00120a5c malloc 00120a5c Initializing CPU #0 CPU: vendor Intel device 68a CPU: family 06, model 08, stepping 0a Enabling cache Setting fixed MTRRs(0-88) Type: UC Setting fixed MTRRs(0-16) Type: WB Setting fixed MTRRs(24-88) Type: WB DONE fixed MTRRs call enable_fixed_mtrr() Setting variable MTRR 0, base: 0MB, range: 128MB, type WB ADDRESS_MASK_HIGH=0xf Setting variable MTRR 1, base: 128MB, range: 64MB, type WB ADDRESS_MASK_HIGH=0xf Setting variable MTRR 2, base: 192MB, range: 32MB, type WB ADDRESS_MASK_HIGH=0xf Setting variable MTRR 3, base: 224MB, range: 16MB, type WB ADDRESS_MASK_HIGH=0xf Setting variable MTRR 4, base: 240MB, range: 8MB, type WB ADDRESS_MASK_HIGH=0xf Setting variable MTRR 5, base: 248MB, range: 4MB, type WB ADDRESS_MASK_HIGH=0xf Running out of variable MTRRs! Zero-sized MTRR range @0KB DONE variable MTRRs Clear out the extra MTRR's call enable_var_mtrr() Leave x86_setup_var_mtrrs MTRR check Fixed MTRRs : Enabled Variable MTRRs: Enabled microcode_info: sig = 0x0000068a pf=0x00000010 rev = 0x00000000 Disabling local apic...done. CPU #0 initialized PCI: 00:00.0 init Northbridge init PCI: 00:01.0 init Check CBFS header at fffeffe0 magic is 4f524243 Found CBFS header at fffeffe0 Check fallback/coreboot_ram CBFS: follow chain: fff80000 + 38 + 9aa7 + align -> fff89b00 Check fallback/payload CBFS: follow chain: fff89b00 + 38 + cc9b + align -> fff96800 Check pci8086,7125.rom In cbfs, rom address for PCI: 00:01.0 = fff96838 PCI Expansion ROM, signature 0xaa55, INIT size 0x8000, data ptr 0x004c PCI ROM Image, Vendor 8086, Device 7125, PCI ROM Image, Class Code 030000, Code Type 00 copying VGA ROM Image from fff96838 to 0xc0000, 0x8000 bytes Real mode stub @00000600: 606 bytes Calling Option ROM... oprom: INT# 0x15 oprom: eax: 0000d042 ebx: 0000ff10 ecx: 00000000 edx: 0000ffff oprom: ebp: 00110fe4 esp: 00000fda edi: 00000000 esi: 00000000 oprom: ip: 791b cs: c000 flags: 00000003 Unknown INT15 function d042! int15 call returned error. ... Option ROM returned. PCI: 00:1e.0 init PCI: 00:1f.0 init IOAPIC Southbridge enabled 2186 Southbridge APIC ID = 2000000 Set power on if power fails RTC Init PCI: 00:1f.1 init IDE0: Primary IDE interface is enabled IDE1: Secondary IDE interface is enabled PCI: 00:1f.2 init USB: Setting up controller.. done. PCI: 00:1f.3 init Check CBFS header at fffeffe0 magic is 4f524243 Found CBFS header at fffeffe0 Check fallback/coreboot_ram CBFS: follow chain: fff80000 + 38 + 9aa7 + align -> fff89b00 Check fallback/payload CBFS: follow chain: fff89b00 + 38 + cc9b + align -> fff96800 Check pci8086,7125.rom CBFS: follow chain: fff96800 + 38 + 8000 + align -> fff9e840 Check CBFS: follow chain: fff9e840 + 28 + 51778 + align -> ffff0000 CBFS: Could not find file pci8086,2443.rom PCI: 00:1f.4 init USB: Setting up controller.. done. Devices initialized Show all devs...After init. Root Device: enabled 1 APIC_CLUSTER: 0: enabled 1 APIC: 00: enabled 1 PCI_DOMAIN: 0000: enabled 1 PCI: 00:00.0: enabled 1 PCI: 00:01.0: enabled 1 PCI: 00:1e.0: enabled 1 PCI: 00:1f.0: enabled 1 PNP: 002e.0: enabled 1 PNP: 002e.3: enabled 1 PNP: 002e.4: enabled 1 PNP: 002e.5: enabled 0 PNP: 002e.7: enabled 1 PNP: 002e.9: enabled 0 PNP: 002e.a: enabled 1 PNP: 002e.b: enabled 0 PCI: 00:1f.1: enabled 1 PCI: 00:1f.2: enabled 1 PCI: 00:1f.3: enabled 1 PCI: 00:1f.4: enabled 1 PCI: 00:1f.5: enabled 1 PCI: 00:1f.6: enabled 0 PCI: 01:08.0: enabled 1 CPU: 00: enabled 1 Initializing CBMEM area to 0xfef0000 (65536 bytes) Adding CBMEM entry as no. 1 Moving GDT to 0fef0200...ok High Tables Base is fef0000. Copying Interrupt Routing Table to 0x000f0000... done. Adding CBMEM entry as no. 2 Copying Interrupt Routing Table to 0x0fef0400... done. PIRQ table: 144 bytes. Multiboot Information structure has been written. Adding CBMEM entry as no. 3 Writing high table forward entry at 0x00000500 Wrote coreboot table at: 00000500 - 00000518 checksum dbef New low_table_end: 0x00000518 Now going to write high coreboot table at 0x0fef1400 rom_table_end = 0x0fef1400 Adjust low_table_end from 0x00000518 to 0x00001000 Adjust rom_table_end from 0x0fef1400 to 0x0ff00000 Adding high table area coreboot memory table: 0. 0000000000000000-0000000000000fff: CONFIGURATION TABLES 1. 0000000000001000-000000000009ffff: RAM 2. 00000000000c0000-000000000feeffff: RAM 3. 000000000fef0000-000000000fefffff: CONFIGURATION TABLES Wrote coreboot table at: 0fef1400 - 0fef1580 checksum d65c coreboot table: 384 bytes. 0. FREE SPACE 0fef3400 0000cc00 1. GDT 0fef0200 00000200 2. IRQ TABLE 0fef0400 00001000 3. COREBOOT 0fef1400 00002000 Check CBFS header at fffeffe0 magic is 4f524243 Found CBFS header at fffeffe0 Check fallback/coreboot_ram CBFS: follow chain: fff80000 + 38 + 9aa7 + align -> fff89b00 Check fallback/payload Got a payload Loading segment from rom address 0xfff89b38 parameter section (skipped) Loading segment from rom address 0xfff89b54 data (compression=1) malloc Enter, size 36, free_mem_ptr 00120aa0 malloc 00120aa0 New segment dstaddr 0x100000 memsize 0x16c3d0 srcaddr 0xfff89bd8 filesize 0xcbcd (cleaned up) New segment addr 0x100000 size 0x16c3d0 offset 0xfff89bd8 filesize 0xcbcd Loading segment from rom address 0xfff89b70 data (compression=1) malloc Enter, size 36, free_mem_ptr 00120ac4 malloc 00120ac4 New segment dstaddr 0x26c3d0 memsize 0x48 srcaddr 0xfff967a5 filesize 0x2e (cleaned up) New segment addr 0x26c3d0 size 0x48 offset 0xfff967a5 filesize 0x2e Loading segment from rom address 0xfff89b8c Entry Point 0x00100000 Loading Segment: addr: 0x0000000000100000 memsz: 0x000000000016c3d0 filesz: 0x000000000000cbcd lb: [0x0000000000100000, 0x0000000000124000) segment: [0x0000000000100000, 0x000000000010cbcd, 0x000000000026c3d0) bounce: [0x000000000fd5fc30, 0x000000000fd6c7fd, 0x000000000fecc000) Post relocation: addr: 0x000000000fd5fc30 memsz: 0x000000000016c3d0 filesz: 0x000000000000cbcd using LZMA [ 0x0fd5fc30, 0fd7c790, 0x0fecc000) <- fff89bd8 Clearing Segment: addr: 0x000000000fd7c790 memsz: 0x000000000014f870 dest 0fd5fc30, end 0fecc000, bouncebuffer fd5fc30 move suffix around: from fd83c30, to 124000, amount: 1483d0 Loading Segment: addr: 0x000000000026c3d0 memsz: 0x0000000000000048 filesz: 0x000000000000002e lb: [0x0000000000100000, 0x0000000000124000) Post relocation: addr: 0x000000000026c3d0 memsz: 0x0000000000000048 filesz: 0x000000000000002e using LZMA [ 0x0026c3d0, 0026c418, 0x0026c418) <- fff967a5 dest 0026c3d0, end 0026c418, bouncebuffer fd5fc30 Loaded segments Jumping to boot code at 100000 entry = 0x00100000 lb_start = 0x00100000 lb_size = 0x00024000 adjust = 0x0fdcc000 buffer = 0x0fd5fc30 elf_boot_notes = 0x00112b98 adjusted_boot_notes = 0x0fedeb98 FILO version 0.6.0 (joe@smitty2m) Sat May 29 16:37:42 EDT 2010 00:1f.4 2444:8086.4 UHCI controller 00:1f.2 2442:8086.2 UHCI controller fullspeed device device 0x05e3:0x0604 is USB 1.1 (Hub) lowspeed device device 0x046d:0xc01b is USB 2.0 (HID) NOTICE: USB mice are not supported. lowspeed device device 0x413c:0x2003 is USB 1.10 (HID) Keyboard has not supported layout (country code 00) Keyboard layout 'us' lowspeed device device 0x0d3d:0x0006 is USB 1.10 NOTICE: This driver defaults to using the first interface. This might be the wrong choice and lead to limited functionality of the device. Please report such a case to coreboot@coreboot.org as you might be the first. (HID) Keyboard has not supported layout (country code 00) Keyboard layout 'us' ERROR: No such CMOS option (boot_devices) Press for default menu.lst (hdc1:/grub/grub.conf), or for prompt... 5 4 3  menu: hdc1:/grub/grub.conf ERROR: No such CMOS option (boot_default) hdc: LBA 40GB: WDC WD400BB-00JHC0 File not found.ERROR: No such CMOS option (boot_default) FILO 0.6.0 lqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqkx xx xx xx xx xx xx xx xx xx xx xx xmqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqj Use the ^ and v keys to select which entry is highlighted. Press enter to boot the selected OS, 'e' to edit the commands before booting, 'a' to modify the kernel arguments before booting, or 'c' for a command-line. Fedora (2.6.27.24-170.2.68.fc10.i686) x Fedora (2.6.27.5-117.fc10.i686) The highlighted entry will be booted automatically in 10 seconds. The highlighted entry will be booted automatically in 9 seconds. The highlighted entry will be booted automatically in 8 seconds. The highlighted entry will be booted automatically in 7 seconds. The highlighted entry will be booted automatically in 6 seconds. The highlighted entry will be booted automatically in 5 seconds. The highlighted entry will be booted automatically in 4 seconds. The highlighted entry will be booted automatically in 3 seconds. FILO 0.6.0 lqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqkx xx xx xx xx xx xx xx xx xx xx xx xmqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqj Use the ^ and v keys to select which entry is highlighted. Press 'b' to boot, 'e' to edit the selected command in the boot sequence, 'c' for a command-line, 'o' to open a new line after ('O' for before) the selected line, 'd' to remove the selected line, or escape to go back to the main me root (hd2,0) x kernel /vmlinuz-2.6.27.24-170.2.68.fc10.i686 ro root=/dev/VolGroup00/> initrd /initrd-2.6.27.24-170.2.68.fc10.i686.img root (hd2,0) kernel /vmlinuz-2.6.27.24-170.2.68.fc10.i686 ro root=/dev/VolGroup00/> [ Minimal BASH-like line editing is supported. For the first word, TAB lists possible command completions. ESC at any time cancels. ENTER at any time accepts your changes.] initrd /initrd-2.6.27.24-170.2.68.fc10.i686.img kernel /vmlinuz-2.6.27.24-170.2.68.fc10.i686 ro root=/dev/VolGroup00/> root (hd2,0) Booting command-list root (hd2,0)kernel /vmlinuz-2.6.27.24-170.2.68.fc10.i686 ro root=/dev/VolGroup00/LogVol00 3 console=tty0 console=ttyS0,115200n8initrd /initrd-2.6.27.24-170.2.68.fc10.i686.img Booting command-list root (hd2,0) kernel /vmlinuz-2.6.27.24-170.2.68.fc10.i686 ro root=/dev/VolGroup00/LogVol00 3 console=tty0 console=ttyS0,115200n8 initrd /initrd-2.6.27.24-170.2.68.fc10.i686.img Booting 'hdc1:/vmlinuz-2.6.27.24-170.2.68.fc10.i686 ro root=/dev/VolGroup00/Log Vol00 3 console=tty0 console=ttyS0,115200n8 initrd=hdc1:/initrd-2.6.27.24-170.2 .68.fc10.i686.img' Found Linux version 2.6.27.24-170.2.68.fc10.i686 (mockbuild@x86-4.fedora.phx.redhat.com) #1 SMP Wed May 20 23:10:16 EDT 2009 bzImage.Loading kernel... okLoading initrd... okJumping to entry point...Initializing cgroup subsys cpuset Initializing cgroup subsys cpu Linux version 2.6.27.24-170.2.68.fc10.i686 (mockbuild@x86-4.fedora.phx.redhat.com) (gcc version 4.3.2 20081105 (Red Hat 4.3.2-7) (GCC) ) #1 SMP Wed May 20 23:10:16 EDT 2009 PAT WC disabled due to known CPU erratum. BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 0000000000001000 type 16 BIOS-e820: 0000000000001000 - 00000000000a0000 (usable) BIOS-e820: 00000000000c0000 - 000000000fef0000 (usable) BIOS-e820: 000000000fef0000 - 000000000ff00000 type 16 DMI not present or invalid. last_pfn = 0xfef0 max_arch_pfn = 0x100000 WARNING: BIOS bug: CPU MTRRs don't cover all of memory, losing 2MB of RAM. ------------[ cut here ]------------ WARNING: at arch/x86/kernel/cpu/mtrr/main.c:1557 mtrr_trim_uncached_memory+0x295/0x2b6() (Not tainted) Modules linked in: Pid: 0, comm: swapper Not tainted 2.6.27.24-170.2.68.fc10.i686 #1 [] warn_on_slowpath+0x65/0x8b [] ? _spin_unlock_irqrestore+0x1b/0x38 [] ? _spin_unlock_irqrestore+0x1b/0x38 [] ? _spin_unlock_irqrestore+0x22/0x38 [] ? release_console_sem+0x1bf/0x1c7 [] ? vprintk+0x2ce/0x2f3 [] ? printk+0xf/0x14 [] mtrr_trim_uncached_memory+0x295/0x2b6 [] setup_arch+0x48f/0x947 [] ? vprintk+0x2ce/0x2f3 [] ? __reserve_early+0xe4/0xf8 [] ? printk+0xf/0x14 [] start_kernel+0x73/0x2f0 [] __init_begin+0x80/0x88 ======================= ---[ end trace 4eaa2a86a8e2da22 ]--- update e820 for mtrr modified physical RAM map: modified: 0000000000000000 - 0000000000001000 type 16 modified: 0000000000001000 - 00000000000a0000 (usable) modified: 00000000000c0000 - 000000000fc00000 (usable) modified: 000000000fc00000 - 000000000fef0000 (reserved) modified: 000000000fef0000 - 000000000ff00000 type 16 last_pfn = 0xfc00 max_arch_pfn = 0x100000 Using x86 segment limits to approximate NX protection RAMDISK: 0fa01000 - 0fd825e9 Allocated new RAMDISK: 0097c000 - 00cfd5e9 Move RAMDISK from 000000000fa01000 - 000000000fd825e8 to 0097c000 - 00cfd5e8 ACPI Error (tbxfroot-0218): A valid RSDP was not found [20080609] 0MB HIGHMEM available. 252MB LOWMEM available. mapped low ram: 0 - 0fc00000 low ram: 00000000 - 0fc00000 bootmap 00002000 - 00003f80 (9 early reservations) ==> bootmem [0000000000 - 000fc00000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] #1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000] #2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000] #3 [0000400000 - 000097712c] TEXT DATA BSS ==> [0000400000 - 000097712c] #4 [0000978000 - 000097c000] INIT_PG_TABLE ==> [0000978000 - 000097c000] #5 [00000f6000 - 0000100000] BIOS reserved ==> [00000f6000 - 0000100000] #6 [0000007000 - 0000008000] PGTABLE ==> [0000007000 - 0000008000] #7 [000097c000 - 0000cfd5e9] NEW RAMDISK ==> [000097c000 - 0000cfd5e9] #8 [0000002000 - 0000004000] BOOTMAP ==> [0000002000 - 0000004000] Zone PFN ranges: DMA 0x00000001 -> 0x00001000 Normal 0x00001000 -> 0x0000fc00 HighMem 0x0000fc00 -> 0x0000fc00 Movable zone start PFN for each node early_node_map[2] active PFN ranges 0: 0x00000001 -> 0x000000a0 0: 0x000000c0 -> 0x0000fc00 Using APIC driver default SMP: Allowing 1 CPUs, 0 hotplug CPUs Local APIC disabled by BIOS -- you can enable it with "lapic" PM: Registered nosave memory: 00000000000a0000 - 00000000000c0000 Allocating PCI resources starting at 10000000 (gap: ff00000:f0100000) PERCPU: Allocating 41372 bytes of per cpu data Built 1 zonelists in Zone order, mobility grouping on. Total pages: 63975 Kernel command line: ro root=/dev/VolGroup00/LogVol00 3 console=tty0 console=ttyS0,115200n8 Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Initializing CPU#0 PID hash table entries: 1024 (order: 10, 4096 bytes) TSC: Using PIT calibration value Detected 996.767 MHz processor. Console: colour VGA+ 80x25 console [tty0] enabled console [ttyS0] enabled Dentry cache hash table entries: 32768 (order: 5, 131072 bytes) Inode-cache hash table entries: 16384 (order: 4, 65536 bytes) Memory: 246076k/258048k available (2748k kernel code, 11576k reserved, 1425k data, 416k init, 0k highmem) virtual kernel memory layout: fixmap : 0xffc57000 - 0xfffff000 (3744 kB) pkmap : 0xff400000 - 0xff800000 (4096 kB) vmalloc : 0xd0800000 - 0xff3fe000 ( 747 MB) lowmem : 0xc0000000 - 0xcfc00000 ( 252 MB) .init : 0xc0819000 - 0xc0881000 ( 416 kB) .data : 0xc06af12e - 0xc0813618 (1425 kB) .text : 0xc0400000 - 0xc06af12e (2748 kB) Checking if this processor honours the WP bit even in supervisor mode...Ok. SLUB: Genslabs=12, HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 Calibrating delay loop (skipped), value calculated using timer frequency.. 1993.53 BogoMIPS (lpj=996767) Security Framework initialized SELinux: Initializing. Mount-cache hash table entries: 512 Initializing cgroup subsys ns Initializing cgroup subsys cpuacct Initializing cgroup subsys devices CPU: L1 I cache: 16K, L1 D cache: 16K CPU: L2 cache: 256K CPU serial number disabled. Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. Checking 'hlt' instruction... OK. SMP alternatives: switching to UP code Freeing SMP alternatives: 14k freed weird, boot CPU (#0) not listedby the BIOS. SMP motherboard not detected. Local APIC not detected. Using dummy APIC emulation. SMP disabled Brought up 1 CPUs Total of 1 processors activated (1993.53 BogoMIPS). net_namespace: 840 bytes Booting paravirtualized kernel on bare hardware Time: 4:58:54 Date: 06/11/10 NET: Registered protocol family 16 PCI: Using configuration type 1 for base access ACPI: Interpreter disabled. Linux Plug and Play Support v0.97 (c) Adam Belay pnp: PnP ACPI: disabled SCSI subsystem initialized usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb PCI: Probing PCI hardware pci 0000:00:1f.0: quirk: region 0400-047f claimed by ICH4 ACPI/GPIO/TCO pci 0000:00:1f.0: quirk: region 0500-053f claimed by ICH4 GPIO pci 0000:01:08.0: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:01:08.0: PME# disabled pci 0000:00:1e.0: transparent bridge pci 0000:00:1f.0: PIIX/ICH IRQ router [8086/2440] pci 0000:00:01.0: found PCI INT A -> IRQ 5 pci 0000:00:1f.2: found PCI INT D -> IRQ 9 pci 0000:00:1f.3: found PCI INT B -> IRQ 6 pci 0000:00:1f.3: sharing IRQ 6 with 0000:00:1f.5 pci 0000:00:1f.4: found PCI INT C -> IRQ 11 pci 0000:01:08.0: found PCI INT A -> IRQ 10 NetLabel: Initializing NetLabel: domain hash size = 128 NetLabel: protocols = UNLABELED CIPSOv4 NetLabel: unlabeled traffic allowed by default tracer: 772 pages allocated for 65536 entries of 48 bytes actual entries 65620 ACPI Exception (utmutex-0263): AE_BAD_PARAMETER, Thread CF428000 could not acquire Mutex [1] [20080609] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:01 pci 0000:00:1e.0: IO window: 0x1000-0x1fff pci 0000:00:1e.0: MEM window: 0xfc000000-0xfc0fffff pci 0000:00:1e.0: PREFETCH window: disabled bus: 00 index 0 io port: [0, ffff] bus: 00 index 1 mmio: [0, ffffffffffffffff] bus: 01 index 0 io port: [1000, 1fff] bus: 01 index 1 mmio: [fc000000, fc0fffff] bus: 01 index 2 mmio: [0, 0] bus: 01 index 3 io port: [0, ffff] bus: 01 index 4 mmio: [0, ffffffffffffffff] NET: Registered protocol family 2 IP route cache hash table entries: 2048 (order: 1, 8192 bytes) TCP established hash table entries: 8192 (order: 4, 65536 bytes) TCP bind hash table entries: 8192 (order: 4, 65536 bytes) TCP: Hash tables configured (established 8192 bind 8192) TCP reno registered NET: Registered protocol family 1 checking if image is initramfs... it is Freeing initrd memory: 3589k freed platform rtc_cmos: registered platform RTC device (no PNP device found) apm: BIOS not found. audit: initializing netlink socket (disabled) type=2000 audit(1276232334.944:1): initialized HugeTLB registered 4 MB page size, pre-allocated 0 pages VFS: Disk quotas dquot_6.5.1 Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) msgmni has been set to 488 Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252) io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered io scheduler cfq registered (default) pci 0000:01:08.0: Firmware left e100 interrupts enabled; disabling pci_hotplug: PCI Hot Plug PCI Core version: 0.5 acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 isapnp: Scanning for PnP cards... isapnp: No Plug & Play device found Non-volatile memory driver v1.2 Linux agpgart interface v0.103 agpgart-intel 0000:00:00.0: Intel i810 Chipset agpgart-intel 0000:00:00.0: AGP aperture is 64M @ 0xf8000000 Serial: 8250/16550 driver4 ports, IRQ sharing enabled ˙serial8250: ttyS0 at I/O 0x3f8 (irq = 0) is a 16550A brd: module loaded loop: module loaded input: Macintosh mouse button emulation as /devices/virtual/input/input0 Driver 'sd' needs updating - please use bus_type methods Driver 'sr' needs updating - please use bus_type methods scsi0 : ata_piix scsi1 : ata_piix ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x2480 irq 14 ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x2488 irq 15 ata2.00: ATA-6: WDC WD400BB-00JHC0, 05.01C05, max UDMA/100 ata2.00: 78165360 sectors, multi 0: LBA ata2.00: limited to UDMA/33 due to 40-wire cable ata2.00: configured for UDMA/33 scsi 1:0:0:0: Direct-Access ATA WDC WD400BB-00JH 05.0 PQ: 0 ANSI: 5 sd 1:0:0:0: [sda] 78165360 512-byte hardware sectors (40021 MB) sd 1:0:0:0: [sda] Write Protect is off sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sd 1:0:0:0: [sda] 78165360 512-byte hardware sectors (40021 MB) sd 1:0:0:0: [sda] Write Protect is off sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sda: sda1 sda2 sd 1:0:0:0: [sda] Attached SCSI disk sd 1:0:0:0: Attached scsi generic sg0 type 0 USB Universal Host Controller Interface driver v3.0 uhci_hcd 0000:00:1f.2: found PCI INT D -> IRQ 9 uhci_hcd 0000:00:1f.2: UHCI Host Controller uhci_hcd 0000:00:1f.2: new USB bus registered, assigned bus number 1 uhci_hcd 0000:00:1f.2: irq 9, io base 0x00002440 usb usb1: configuration #1 chosen from 1 choice hub 1-0:1.0: USB hub found hub 1-0:1.0: 2 ports detected Clocksource tsc unstable (delta = 106982795 ns) usb usb1: New USB device found, idVendor=1d6b, idProduct=0001 usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb1: Product: UHCI Host Controller usb usb1: Manufacturer: Linux 2.6.27.24-170.2.68.fc10.i686 uhci_hcd usb usb1: SerialNumber: 0000:00:1f.2 uhci_hcd 0000:00:1f.4: found PCI INT C -> IRQ 11 uhci_hcd 0000:00:1f.4: UHCI Host Controller uhci_hcd 0000:00:1f.4: new USB bus registered, assigned bus number 2 uhci_hcd 0000:00:1f.4: irq 11, io base 0x00002460 usb usb2: configuration #1 chosen from 1 choice hub 2-0:1.0: USB hub found hub 2-0:1.0: 2 ports detected usb 1-1: new full speed USB device using uhci_hcd and address 2 usb usb2: New USB device found, idVendor=1d6b, idProduct=0001 usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb2: Product: UHCI Host Controller usb usb2: Manufacturer: Linux 2.6.27.24-170.2.68.fc10.i686 uhci_hcd usb usb2: SerialNumber: 0000:00:1f.4 PNP: No PS/2 controller found. Probing ports directly. mice: PS/2 mouse device common for all mice rtc_cmos rtc_cmos: rtc core: registered rtc_cmos as rtc0 rtc0: alarms up to one day device-mapper: uevent: version 1.0.3 device-mapper: ioctl: 4.14.0-ioctl (2008-04-23) initialised: dm-devel@redhat.com cpuidle: using governor ladder cpuidle: using governor menu usb 1-1: configuration #1 chosen from 1 choice hub 1-1:1.0: USB hub found hub 1-1:1.0: 4 ports detected usb 1-1: New USB device found, idVendor=05e3, idProduct=0604 usb 1-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0 usb 1-1: Product: USB Hub usb 1-1.1: new low speed USB device using uhci_hcd and address 3 usb 1-1.1: configuration #1 chosen from 1 choice usb 1-1.1: New USB device found, idVendor=046d, idProduct=c01b usb 1-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 usb 1-1.1: Product: USB-PS/2 Optical Mouse usb 1-1.1: Manufacturer: Logitech usb 1-1.2: new low speed USB device using uhci_hcd and address 4 usb 1-1.2: configuration #1 chosen from 1 choice usb 1-1.2: New USB device found, idVendor=413c, idProduct=2003 usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 usb 1-1.2: Product: Dell USB Keyboard usb 1-1.2: Manufacturer: Dell usb 1-1.4: new low speed USB device using uhci_hcd and address 5 usb 1-1.4: configuration #1 chosen from 1 choice usb 1-1.4: New USB device found, idVendor=0d3d, idProduct=0006 usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0 usb 1-1.4: Product: Generic KVM102UC usb 1-1.4: Manufacturer: Tangtop usbcore: registered new interface driver hiddev input: Logitech USB-PS/2 Optical Mouse as /devices/pci0000:00/0000:00:1f.2/usb1/1-1/1-1.1/1-1.1:1.0/input/input1 input,hidraw0: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:1f.2-1.1 input: Dell Dell USB Keyboard as /devices/pci0000:00/0000:00:1f.2/usb1/1-1/1-1.2/1-1.2:1.0/input/input2 input,hidraw1: USB HID v1.10 Keyboard [Dell Dell USB Keyboard] on usb-0000:00:1f.2-1.2 input: Tangtop Generic KVM102UC as /devices/pci0000:00/0000:00:1f.2/usb1/1-1/1-1.4/1-1.4:1.0/input/input3 input,hidraw2: USB HID v1.00 Keyboard [Tangtop Generic KVM102UC] on usb-0000:00:1f.2-1.4 input: Tangtop Generic KVM102UC as /devices/pci0000:00/0000:00:1f.2/usb1/1-1/1-1.4/1-1.4:1.1/input/input4 input,hidraw3: USB HID v1.00 Mouse [Tangtop Generic KVM102UC] on usb-0000:00:1f.2-1.4 usbcore: registered new interface driver usbhid usbhid: v2.6:USB HID core driver nf_conntrack version 0.5.0 (4096 buckets, 16384 max) CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Plase use nf_conntrack.acct=1 kernel paramater, acct=1 nf_conntrack module option or sysctl net.netfilter.nf_conntrack_acct=1 to enable it. ip_tables: (C) 2000-2006 Netfilter Core Team TCP cubic registered Initializing XFRM netlink socket NET: Registered protocol family 17 Using IPI No-Shortcut mode registered taskstats version 1 Magic number: 14:688:969 hidraw hidraw0: hash matches Freeing unused kernel memory: 416k freed Write protecting the kernel text: 2752k Write protecting the kernel read-only data: 1176k Mounting proc filesystem Mounting sysfs filesystem Creating /dev Creating initial device nodes Loading /lib/kbd/keymaps/i386/qwerty/us.map Setting up hotplug. Creating block device nodes. Creating character device nodes. Loading pata_acpi module Loading ata_generic module Making device-mapper control node Scanning logical volumes Reading all physical volumes. This may take a while... Found volume group "VolGroup00" using metadata type lvm2 Activating logical volumes 2 logical volume(s) in volume group "VolGroup00" now active Creating root device. Mounting root filesystem. EXT3-fs: INFO: recovery required on readonly filesystem. EXT3-fs: write access will be enabled during recovery. kjournald starting. Commit interval 5 seconds EXT3-fs: recovery complete. EXT3-fs: mounted filesystem with ordered data mode. Setting up other filesystems. type=1404 audit(1276232339.637:2): enforcing=1 old_enforcing=0 auid=4294967295 ses=4294967295 type=1403 audit(1276232340.872:3): policy loaded auid=4294967295 ses=4294967295 Switching to new root and running init. Welcome to Fedora Press 'I' to enter interactive startup. Starting udev: G[ OK ] Setting hostname localhost.localdomain: [ OK ] Setting up Logical Volume Management: 2 logical volume(s) in volume group "VolGroup00" now active [ OK ] Checking filesystems Checking all file systems. [/sbin/fsck.ext3 (1) -- /] fsck.ext3 -a /dev/VolGroup00/LogVol00 /dev/VolGroup00/LogVol00: clean, 67326/2354688 files, 609171/9412608 blocks [/sbin/fsck.ext3 (1) -- /boot] fsck.ext3 -a /dev/sda1 /boot: recovering journal /boot: clean, 40/50200 files, 27058/200780 blocks [ OK ] Remounting root filesystem in read-write mode: [ OK ] Mounting local filesystems: [ OK ] Enabling local filesystem quotas: [ OK ] Enabling /etc/fstab swaps: [ OK ] Entering non-interactive startup Applying Intel CPU microcode update: [ OK ] Starting auditd: [ OK ] Starting portreserve: [ OK ] Starting system logger: [ OK ] Starting irqbalance: [ OK ] Starting rpcbind: [ OK ] Starting NFS statd: [ OK ] Starting RPC idmapd: [ OK ] Starting system message bus: [ OK ] Starting HAL daemon: [ OK ] Starting PC/SC smart card daemon (pcscd): [ OK ] Setting network parameters... [ OK ] Starting NetworkManager daemon: [ OK ] Starting setroubleshootd: [ OK ] Starting Bluetooth services:[ OK ] Starting sshd: [ OK ] ntpdate: Synchronizing with time server: [FAILED] Starting ntpd: [ OK ] Starting sendmail: [ OK ] Starting sm-client: [ OK ] Starting crond: [ OK ][ OK ] Starting kerneloops:[ OK ] Starting atd: [ OK ][ OK ] Starting Avahi daemon... [ OK ] Starting cups: [ OK ] Fedora release 10 (Cambridge) Kernel 2.6.27.24-170.2.68.fc10.i686 on an i686 (/dev/ttyS0) localhost.localdomain login: