Ok I see now what you were referring to.<br><br>All,<br>The details about the board below:<br><br>Vendor: Supermicro<br>MainBoard: H8DME-2<br>NorthVBridge: AMD K8<br>SouthBridge: NVIDIA MCP55<br>Super I/O: Winbond™ W83627EHG<br>
CPU: AMD Opteron<br><br>Thanks<br><br><br><table style="font-size: smaller;" border="0" height="19" width="597"><tbody><tr bgcolor="#eeeeee"><td>Supermicro
</td><td> <a href="http://www.supermicro.com/Aplus/motherboard/Opteron2000/MCP55/H8DME-2.cfm" class="external text" title="http://www.supermicro.com/Aplus/motherboard/Opteron2000/MCP55/H8DME-2.cfm">H8DME-2</a>
</td><td> AMD K8
</td><td> NVIDIA MCP55
</td><td> Winbond™ W83627EHG
</td><td> AMD Opteron™
</td><td> Socket F
</td></tr></tbody></table><br><br><div class="gmail_quote">On Mon, Jul 5, 2010 at 9:06 PM, Gregg Levine <span dir="ltr"><<a href="mailto:gregg.drwho8@gmail.com">gregg.drwho8@gmail.com</a>></span> wrote:<br><blockquote class="gmail_quote" style="border-left: 1px solid rgb(204, 204, 204); margin: 0pt 0pt 0pt 0.8ex; padding-left: 1ex;">
<div><div></div><div class="h5">On Mon, Jul 5, 2010 at 9:58 PM, Daniel J. Celta <<a href="mailto:dcelta@gmail.com">dcelta@gmail.com</a>> wrote:<br>
> Greg,<br>
> Could you point me to the right "Wiki" page, so I can provide what you are<br>
> referring to.<br>
> I am thinking machine and motherboard specs, but I want to make sure I am<br>
> looking at the same page you are.<br>
> Thanks<br>
><br>
> On Mon, Jul 5, 2010 at 5:51 PM, Gregg Levine <<a href="mailto:gregg.drwho8@gmail.com">gregg.drwho8@gmail.com</a>> wrote:<br>
>><br>
>> On Mon, Jul 5, 2010 at 5:02 PM, Daniel J. Celta <<a href="mailto:dcelta@gmail.com">dcelta@gmail.com</a>> wrote:<br>
>> > Has anyone updated this Supermicro server Board BIOS for the<br>
>> > H8DME-2......<br>
>> ><br>
>> > I have installed FC10, (i was able to complete this installation by<br>
>> > turning<br>
>> > of the RAID configuration in the BIOS), and now I am having trouble when<br>
>> > trying to upgrade the Operating system to FC13.<br>
>> ><br>
>> ><br>
>> > I suspect, if I update the BIOS, I currently have the version of the<br>
>> > BIOS<br>
>> > that came pre-installed with the server, I may be able to upgrade to<br>
>> > FC13.<br>
>> ><br>
>> > One thing I like to mention, when running "make menuconfig" I was not<br>
>> > sure<br>
>> > of the ROM Chip size, and used the largest available setting 4MB.<br>
>> ><br>
>> > - How can I check the proper setting for this parameter????<br>
>> ><br>
>> ><br>
>> ><br>
>> > So now, I have created the coreboot.rom, and think I am ready to run<br>
>> > "flashrom".......<br>
>> ><br>
>> > - Is there anything else I need to check before I pull the trigger???<br>
>> ><br>
>> > - Has anyone had any problems I should be aware of????<br>
>> ><br>
>> ><br>
>> > Thanks<br>
>> ><br>
>> > Daniel<br>
>> ><br>
>> > --<br>
>> > coreboot mailing list: <a href="mailto:coreboot@coreboot.org">coreboot@coreboot.org</a><br>
>> > <a href="http://www.coreboot.org/mailman/listinfo/coreboot" target="_blank">http://www.coreboot.org/mailman/listinfo/coreboot</a><br>
>> ><br>
>><br>
>> Hello!<br>
>> I confess I'm not familiar with that board. Why don't you post the<br>
>> exact same things that the Wiki asks for? That way the rest of us,<br>
>> even those of us who do know it, can advise you? I do however believe<br>
>> you're on the right path.<br>
>><br>
>><br>
>> -----<br>
>> Gregg C Levine <a href="mailto:gregg.drwho8@gmail.com">gregg.drwho8@gmail.com</a><br>
>> "This signature fought the Time Wars, time and again."<br>
><br>
><br>
<br>
</div></div>Hello!<br>
I found it listed here:<br>
<a href="http://www.coreboot.org/Supported_Motherboards" target="_blank">http://www.coreboot.org/Supported_Motherboards</a><br>
<br>
It's on the entries marked as servers, and of course via the vendor's<br>
entered name. Third one down from there.<br>
<div><div></div><div class="h5">-----<br>
Gregg C Levine <a href="mailto:gregg.drwho8@gmail.com">gregg.drwho8@gmail.com</a><br>
"This signature fought the Time Wars, time and again."<br>
</div></div></blockquote></div><br>