Anders,<br>Thanks you,<br>I can see how to flash as long as I can boot the machine, otherwise I am in trouble.  I wiould have no means to get to that chip and flash it back with the original BIOS........ :(<br><br>Is there a way to test if the LinuxBIOS would work, without locking myself out....... ????<br>
<br>Has anyone done this on this board?????<br><br>Thanks<br><br><br><br><div class="gmail_quote">On Mon, Jul 5, 2010 at 8:59 PM, Anders Jenbo <span dir="ltr"><<a href="mailto:anders@jenbo.dk">anders@jenbo.dk</a>></span> wrote:<br>
<blockquote class="gmail_quote" style="border-left: 1px solid rgb(204, 204, 204); margin: 0pt 0pt 0pt 0.8ex; padding-left: 1ex;">You can flash the original image in the same way as you are going to do<br>
with the coreboot image. flashrom -w imagename.rom<br>
<br>
But if you board fails to boot then you will need to have access to some<br>
thing else that can flash that chip, one option is another motherboard<br>
that uses the same type of chip, or a rom flasher for the type of chip<br>
you have. This requires that the chip is socketed, so that you can<br>
remove it from the board as you write back the old image.<br>
<br>
Another option is to use what is known as a tophat, it will allow you to<br>
install a second flash rom on top of the once that is soldered on to the<br>
board (this only works with plcc32 chips as fare as i know).<br>
<br>
-Anders<br>
<br>
man, 05 07 2010 kl. 20:53 -0500, skrev Daniel J. Celta:<br>
<div><div></div><div class="h5">> Ok I was able to determine the ROM chip of the server.....  Thank you<br>
> very much...<br>
><br>
> Now, I did save the original BIOS information using "flashrom -r<br>
> <filename>"<br>
><br>
> But, not sure I know how to rebuild back the BIOS from this file in<br>
> case needed.<br>
><br>
> Do you have any suggestions????<br>
><br>
> Thanks<br>
><br>
> On Mon, Jul 5, 2010 at 7:12 PM, <a href="mailto:anders@jenbo.dk">anders@jenbo.dk</a> <<a href="mailto:anders@jenbo.dk">anders@jenbo.dk</a>><br>
> wrote:<br>
>         Run flashrom with no parameters and it should tell you what<br>
>         Rom chip you have.<br>
><br>
>         Before you pull the trigger you should make sure that you have<br>
>         a way to recover the original BIOS (with out the use of the<br>
>         computer you are doing this to).<br>
><br>
>         Mvh Anders<br>
><br>
>         ----- Reply message -----<br>
>         Fra: "Daniel J. Celta" <<a href="mailto:dcelta@gmail.com">dcelta@gmail.com</a>><br>
>         Dato: man., jul. 5, 2010 23:02<br>
>         Emne: [coreboot] H8DME-2<br>
>         Til: <<a href="mailto:coreboot@coreboot.org">coreboot@coreboot.org</a>><br>
><br>
><br>
>         Has anyone updated this Supermicro server Board BIOS for the<br>
>         H8DME-2......<br>
><br>
>         I have installed FC10, (i was able to complete this<br>
>         installation by turning of the RAID configuration in the<br>
>         BIOS), and now I am having trouble when trying to upgrade the<br>
>         Operating system to FC13.<br>
><br>
><br>
>         I suspect, if I update the BIOS, I currently have the version<br>
>         of the BIOS that came pre-installed with the server, I may be<br>
>         able to upgrade to FC13.<br>
><br>
>         One thing I like to mention, when running "make menuconfig" I<br>
>         was not sure of the ROM Chip size, and used the largest<br>
>         available setting 4MB.<br>
><br>
>         - How can I check the proper setting for this parameter????<br>
><br>
><br>
><br>
>         So now, I have created the coreboot.rom, and think I am ready<br>
>         to run "flashrom".......<br>
><br>
>         - Is there anything else I need to check before I pull the<br>
>         trigger???<br>
><br>
>         - Has anyone had any problems I should be aware of????<br>
><br>
><br>
>         Thanks<br>
><br>
>         Daniel<br>
><br>
>         --<br>
>         coreboot mailing list: <a href="mailto:coreboot@coreboot.org">coreboot@coreboot.org</a><br>
>         <a href="http://www.coreboot.org/mailman/listinfo/coreboot" target="_blank">http://www.coreboot.org/mailman/listinfo/coreboot</a><br>
><br>
<br>
<br>
</div></div></blockquote></div><br>