Quoting ron minnich <rminnich@gmail.com>:<br />
<br />
> On Mon, Aug 2, 2010 at 2:53 PM,  <austinro@msu.edu> wrote:<br />
><br />
>> I'm not sure what other info might be useful, but I'll provide it or try<br />
>> whatever is asked.  A few other possible clues: the factory bios only<br />
>> recognized half of my installed ram, but coreboot recognized all of it.<br />
>> With coreinfo or memtest as payloads, it did not restart, and it displayed<br />
>> the proper vga output.<br />
><br />
> can you remove the RAM that the BIOS did not find? In this way you<br />
> remove any potential hardware problems.<br />
<br />
This board only has one DIMM slot, and the board is only supposed to support up to 1G.  I have 1G installed, and it gets reported as 512M.  The only other nearly compatible RAM I have to try is a 2G stick; coreboot sees 2G, then has the same problem; the stock BIOS sees 1G, then Linux crashes later.<br />
<br />
So no, I can't practically remove that RAM that wasn't found.  <br />
<br />
(This board is kind of lousy overall --when I bought it some of the reviews said it was fussy about RAM, but this particular brand/model# worked, so that's the one I bought, but as I said I could only use half, plus it's really fussy about booting from USB.)<br />
<br />
Rob<br />
<br />