Depends on the "Introduce get_vt8237_lpc() function" and "Use get_vt8237_lpc() in vt8237_sb_enable_fid_vid()" patches. This adds VT8237A specific VLINK/LPC init in vt8237r_early_smbus.c I ran some tests and apparently both the | /* So the chip knows we are on AMD. */ | pci_write_config8(devctl, 0x7c, 0x7f); and | /* | * Allow SLP# signal to assert LDTSTOP_L. | * Will work for C3 and for FID/VID change. | */ | outb(0x1, VT8237R_ACPI_IO_BASE + 0x11); in vt8237r_early_smbus.c are needed on VT8237A, otherwise I get a (non-fatal) fid/vid change error on boot. While vt8237a_vlink_init() in vt8237_ctrl.c is a modified vt8237r_vlink_init(), vt8237a_init() in vt8237r_lpc.c is a modified vt8237s_init(). Signed-off-by: Tobias Diedrich --- Index: src/southbridge/via/vt8237r/vt8237r_early_smbus.c =================================================================== --- src/southbridge/via/vt8237r/vt8237r_early_smbus.c.orig 2010-11-06 22:30:40.000000000 +0100 +++ src/southbridge/via/vt8237r/vt8237r_early_smbus.c 2010-11-06 22:30:41.000000000 +0100 @@ -257,19 +257,30 @@ return; devid = pci_read_config16(dev, PCI_DEVICE_ID); - if (devid == PCI_DEVICE_ID_VIA_VT8237S_LPC) { - devctl = pci_locate_device(PCI_ID(PCI_VENDOR_ID_VIA, - PCI_DEVICE_ID_VIA_VT8237_VLINK), 0); - if (devctl == PCI_DEV_INVALID) - return; + /* generic setup */ + + /* Set ACPI base address to I/O VT8237R_ACPI_IO_BASE. */ + pci_write_config16(dev, 0x88, VT8237R_ACPI_IO_BASE | 0x1); + + /* Enable ACPI accessm RTC signal gated with PSON. */ + pci_write_config8(dev, 0x81, 0x84); + + /* chipset-specific parts */ - /* Set ACPI base address to I/O VT8237R_ACPI_IO_BASE. */ - pci_write_config16(dev, 0x88, VT8237R_ACPI_IO_BASE | 0x1); + /* VLINK: FIXME: can we drop the devid check and just look for the VLINK device? */ + if (devid == PCI_DEVICE_ID_VIA_VT8237S_LPC || + devid == PCI_DEVICE_ID_VIA_VT8237A_LPC) { + devctl = pci_locate_device(PCI_ID(PCI_VENDOR_ID_VIA, + PCI_DEVICE_ID_VIA_VT8237_VLINK), 0); - /* Enable ACPI accessm RTC signal gated with PSON. */ - pci_write_config8(dev, 0x81, 0x84); + if (devctl != PCI_DEV_INVALID) { + /* So the chip knows we are on AMD. */ + pci_write_config8(devctl, 0x7c, 0x7f); + } + } + if (devid == PCI_DEVICE_ID_VIA_VT8237S_LPC) { /* * Allow SLP# signal to assert LDTSTOP_L. * Will work for C3 and for FID/VID change. @@ -280,17 +291,10 @@ /* Reduce further the STPCLK/LDTSTP signal to 5us. */ pci_write_config8(dev, 0xec, 0x4); - /* So the chip knows we are on AMD. */ - pci_write_config8(devctl, 0x7c, 0x7f); - return; } - /* Set ACPI base address to I/O VT8237R_ACPI_IO_BASE. */ - pci_write_config16(dev, 0x88, VT8237R_ACPI_IO_BASE | 0x1); - - /* Enable ACPI accessm RTC signal gated with PSON. */ - pci_write_config8(dev, 0x81, 0x84); + /* VT8237R and VT8237A */ /* * Allow SLP# signal to assert LDTSTOP_L.