<p>Hi,</p>
<p>The CF is the primary master and the IDE interface is the primare slave.</p>
<p>I've tried to enable the PATA MSR but lspci -vvv displays the IDE controller as [disabled] (base at 1f0h and 170h in memory space). Is there any register in the pci-to-isa bridge that I should reprogram?</p>
<p>Thanks,</p>
<p>Darmawan</p>
<p><blockquote type="cite">On 10 Dec 2010 16:17, "Darmawan Salihun" <<a href="mailto:darmawan.salihun@gmail.com">darmawan.salihun@gmail.com</a>> wrote:<br><br>Hello,<br>
<br>
Unfortunately, the board is a custom-build board.<br>
<br>
I'm currently waiting for information from the board vendor.<br>
Yes, I've tried using only the PATA interface (there's a PATA<br>
connector on the board).<br>
With the stock BIOS (AMI), devices on the PATA could be detected but<br>
couldn't be written into,<br>
MBR loading occasionally failed as well.<br>
<br>
I'm still on the process of porting coreboot to this particular board.<br>
<br>
As for the cs5536_pata.msr=1, haven't try that one. I'll test ASAP.<br>
<br>
Thanks for the hints.<br>
<font color="#888888"><br>
-Darmawan<br>
</font><p><font color="#500050"><br><br><br>On 12/10/10, Peter Stuge <<a href="mailto:peter@stuge.se">peter@stuge.se</a>> wrote:<br>> Darmawan Salihun wrote:<br>>> There's a CF interf...</font></p><p><font color="#500050">-- <br>
--------------------------------------------------------------------<br>-= Human knowledge belongs ...</font></p></blockquote></p>