[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Linux version 2.6.32-26-generic (root@devel.trisquel.info) (gcc version 4.4.3 (Ubuntu 4.4.3-4ubuntu5) ) #48trisquel1 SMP Tue Nov 30 12:03:53 UTC 2010 (Ubuntu 2.6.32-26.48trisquel1-generic 2.6.32.24+drm33.11-libre1)
[    0.000000] KERNEL supported cpus:
[    0.000000]   Intel GenuineIntel
[    0.000000]   AMD AuthenticAMD
[    0.000000]   NSC Geode by NSC
[    0.000000]   Cyrix CyrixInstead
[    0.000000]   Centaur CentaurHauls
[    0.000000]   Transmeta GenuineTMx86
[    0.000000]   Transmeta TransmetaCPU
[    0.000000]   UMC UMC UMC UMC
[    0.000000] BIOS-provided physical RAM map:
[    0.000000]  BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[    0.000000]  BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[    0.000000]  BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
[    0.000000]  BIOS-e820: 0000000000100000 - 0000000037fef000 (usable)
[    0.000000]  BIOS-e820: 0000000037fef000 - 0000000040000000 (reserved)
[    0.000000]  BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
[    0.000000] DMI 2.4 present.
[    0.000000] last_pfn = 0x37fef max_arch_pfn = 0x100000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-FFFFF write-back
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 000000000000 mask FFFFC0000000 write-back
[    0.000000]   1 base 000038000000 mask FFFFF8000000 uncachable
[    0.000000]   2 disabled
[    0.000000]   3 disabled
[    0.000000]   4 disabled
[    0.000000]   5 disabled
[    0.000000]   6 disabled
[    0.000000]   7 disabled
[    0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[    0.000000] e820 update range: 0000000000002000 - 0000000000006000 (usable) ==> (reserved)
[    0.000000] Scanning 1 areas for low memory corruption
[    0.000000] modified physical RAM map:
[    0.000000]  modified: 0000000000000000 - 0000000000002000 (usable)
[    0.000000]  modified: 0000000000002000 - 0000000000006000 (reserved)
[    0.000000]  modified: 0000000000006000 - 000000000009fc00 (usable)
[    0.000000]  modified: 000000000009fc00 - 00000000000a0000 (reserved)
[    0.000000]  modified: 00000000000f0000 - 0000000000100000 (reserved)
[    0.000000]  modified: 0000000000100000 - 0000000037fef000 (usable)
[    0.000000]  modified: 0000000037fef000 - 0000000040000000 (reserved)
[    0.000000]  modified: 00000000e0000000 - 00000000f0000000 (reserved)
[    0.000000] initial memory mapped : 0 - 00c00000
[    0.000000] init_memory_mapping: 0000000000000000-00000000377fe000
[    0.000000] Using x86 segment limits to approximate NX protection
[    0.000000]  0000000000 - 0000400000 page 4k
[    0.000000]  0000400000 - 0037400000 page 2M
[    0.000000]  0037400000 - 00377fe000 page 4k
[    0.000000] kernel direct mapping tables up to 377fe000 @ 7000-c000
[    0.000000] RAMDISK: 291ba000 - 2a032e17
[    0.000000] ACPI: RSDP 000fdb80 00014 (v00 CORE  )
[    0.000000] ACPI: RSDT 37ff2424 0003C (v01 CORE   COREBOOT 00000000 CORE 00000000)
[    0.000000] ACPI: HPET 37ff24c8 00038 (v01 CORE   COREBOOT 00000000 CORE 00000000)
[    0.000000] ACPI: APIC 37ff2500 00054 (v01 CORE   COREBOOT 00000000 CORE 00000000)
[    0.000000] ACPI: SRAT 37ff2558 00090 (v01 CORE   COREBOOT 00000000 CORE 00000000)
[    0.000000] ACPI: SLIT 37ff25e8 0002D (v01 CORE   COREBOOT 00000000 CORE 00000000)
[    0.000000] ACPI: SSDT 37ff2620 00635 (v01 AMD-FA AMD-ACPI 06040000 INTL 20090521)
[    0.000000] ACPI: FACP 37ff5648 000F4 (v03 CORE   COREBOOT 00000000 CORE 00000000)
[    0.000000] ACPI: DSDT 37ff2c58 029A9 (v02 ECS    A740GM-M 00010001 INTL 20090521)
[    0.000000] ACPI: FACS 37ff5608 00040
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] 7MB HIGHMEM available.
[    0.000000] 887MB LOWMEM available.
[    0.000000]   mapped low ram: 0 - 377fe000
[    0.000000]   low ram: 0 - 377fe000
[    0.000000]   node 0 low ram: 00000000 - 377fe000
[    0.000000]   node 0 bootmap 00008000 - 0000ef00
[    0.000000] (9 early reservations) ==> bootmem [0000000000 - 00377fe000]
[    0.000000]   #0 [0000000000 - 0000001000]   BIOS data page ==> [0000000000 - 0000001000]
[    0.000000]   #1 [0000001000 - 0000002000]    EX TRAMPOLINE ==> [0000001000 - 0000002000]
[    0.000000]   #2 [0000006000 - 0000007000]       TRAMPOLINE ==> [0000006000 - 0000007000]
[    0.000000]   #3 [0000100000 - 00008c8ed8]    TEXT DATA BSS ==> [0000100000 - 00008c8ed8]
[    0.000000]   #4 [00291ba000 - 002a032e17]          RAMDISK ==> [00291ba000 - 002a032e17]
[    0.000000]   #5 [000009fc00 - 0000100000]    BIOS reserved ==> [000009fc00 - 0000100000]
[    0.000000]   #6 [00008c9000 - 00008cc049]              BRK ==> [00008c9000 - 00008cc049]
[    0.000000]   #7 [0000007000 - 0000008000]          PGTABLE ==> [0000007000 - 0000008000]
[    0.000000]   #8 [0000008000 - 000000f000]          BOOTMAP ==> [0000008000 - 000000f000]
[    0.000000] found SMP MP-table at [c00fdba0] fdba0
[    0.000000] Zone PFN ranges:
[    0.000000]   DMA      0x00000000 -> 0x00001000
[    0.000000]   Normal   0x00001000 -> 0x000377fe
[    0.000000]   HighMem  0x000377fe -> 0x00037fef
[    0.000000] Movable zone start PFN for each node
[    0.000000] early_node_map[3] active PFN ranges
[    0.000000]     0: 0x00000000 -> 0x00000002
[    0.000000]     0: 0x00000006 -> 0x0000009f
[    0.000000]     0: 0x00000100 -> 0x00037fef
[    0.000000] On node 0 totalpages: 229258
[    0.000000] free_area_init_node: node 0, pgdat c0786760, node_mem_map c1001000
[    0.000000]   DMA zone: 32 pages used for memmap
[    0.000000]   DMA zone: 0 pages reserved
[    0.000000]   DMA zone: 3963 pages, LIFO batch:0
[    0.000000]   Normal zone: 1744 pages used for memmap
[    0.000000]   Normal zone: 221486 pages, LIFO batch:31
[    0.000000]   HighMem zone: 16 pages used for memmap
[    0.000000]   HighMem zone: 2017 pages, LIFO batch:0
[    0.000000] Using APIC driver default
[    0.000000] ACPI: PM-Timer IO Port: 0x818
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[    0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[    0.000000] IOAPIC[0]: apic_id 2, version 33, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ2 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x102282a0 base: 0xfed00000
[    0.000000] SMP: Allowing 1 CPUs, 0 hotplug CPUs
[    0.000000] nr_irqs_gsi: 24
[    0.000000] PM: Registered nosave memory: 0000000000002000 - 0000000000006000
[    0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[    0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
[    0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
[    0.000000] Allocating PCI resources starting at 40000000 (gap: 40000000:a0000000)
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:1 nr_node_ids:1
[    0.000000] PERCPU: Embedded 14 pages/cpu @c1800000 s36056 r0 d21288 u4194304
[    0.000000] pcpu-alloc: s36056 r0 d21288 u4194304 alloc=1*4194304
[    0.000000] pcpu-alloc: [0] 0 
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 227466
[    0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.32-26-generic root=UUID=54d0a69b-60ef-4dc3-b33b-5d220cc541f5 ro console=ttyS0,115200
[    0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[    0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[    0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[    0.000000] Enabling fast FPU save and restore... done.
[    0.000000] Enabling unmasked SIMD FPU exception support... done.
[    0.000000] Initializing CPU#0
[    0.000000] allocated 4587180 bytes of page_cgroup
[    0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[    0.000000] Initializing HighMem for node 0 (000377fe:00037fef)
[    0.000000] Memory: 881244k/917436k available (4682k kernel code, 35356k reserved, 2041k data, 656k init, 8132k highmem)
[    0.000000] virtual kernel memory layout:
[    0.000000]     fixmap  : 0xfff1d000 - 0xfffff000   ( 904 kB)
[    0.000000]     pkmap   : 0xff800000 - 0xffc00000   (4096 kB)
[    0.000000]     vmalloc : 0xf7ffe000 - 0xff7fe000   ( 120 MB)
[    0.000000]     lowmem  : 0xc0000000 - 0xf77fe000   ( 887 MB)
[    0.000000]       .init : 0xc0791000 - 0xc0835000   ( 656 kB)
[    0.000000]       .data : 0xc0592847 - 0xc0790e68   (2041 kB)
[    0.000000]       .text : 0xc0100000 - 0xc0592847   (4682 kB)
[    0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[    0.000000] SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[    0.000000] Hierarchical RCU implementation.
[    0.000000] NR_IRQS:2304 nr_irqs:256
[    0.000000] spurious 8259A interrupt: IRQ7.
[    0.000000] Console: colour VGA+ 80x25
[    0.000000] console [ttyS0] enabled
[    0.000000] HPET config register value = 0xFFFFFFFF. Disabling HPET
[    0.000000] Fast TSC calibration using PIT
[    0.000000] Detected 2706.587 MHz processor.
[    0.012003] Calibrating delay loop (skipped), value calculated using timer frequency.. 5413.17 BogoMIPS (lpj=10826348)
[    0.020011] Security Framework initialized
[    0.024014] AppArmor: AppArmor initialized
[    0.028007] Mount-cache hash table entries: 512
[    0.032071] Initializing cgroup subsys ns
[    0.036004] Initializing cgroup subsys cpuacct
[    0.040004] Initializing cgroup subsys memory
[    0.044006] Initializing cgroup subsys devices
[    0.048003] Initializing cgroup subsys freezer
[    0.052003] Initializing cgroup subsys net_cls
[    0.056013] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[    0.060003] CPU: L2 Cache: 1024K (64 bytes/line)
[    0.064006] CPU: Hyper-Threading is disabled
[    0.068004] mce: CPU supports 6 MCE banks
[    0.072012] using C1E aware idle routine
[    0.076005] Performance Events: AMD PMU driver.
[    0.081495] ... version:                0
[    0.084003] ... bit width:              48
[    0.088003] ... generic registers:      4
[    0.092003] ... value mask:             0000ffffffffffff
[    0.096003] ... max period:             00007fffffffffff
[    0.100003] ... fixed-purpose events:   0
[    0.104003] ... event mask:             000000000000000f
[    0.108005] Checking 'hlt' instruction... OK.
[    0.128930] SMP alternatives: switching to UP code
[    0.138234] Freeing SMP alternatives: 19k freed
[    0.140014] ACPI: Core revision 20090903
[    0.150636] ftrace: converting mcount calls to 0f 1f 44 00 00
[    0.152009] ftrace: allocating 21794 entries in 43 pages
[    0.160083] Enabling APIC mode:  Flat.  Using 1 I/O APICs
[    0.164393] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.210222] CPU0: AMD Sempron(tm) 140 type unknown stepping 02
[    0.220001] Brought up 1 CPUs
[    0.220001] Total of 1 processors activated (5413.17 BogoMIPS).
[    0.220047] CPU0 attaching NULL sched-domain.
[    0.220137] devtmpfs: initialized
[    0.224251] regulator: core version 0.5
[    0.228036] Time: 23:44:03  Date: 01/15/11
[    0.232033] NET: Registered protocol family 16
[    0.236082] EISA bus registered
[    0.240008] ACPI: bus type pci registered
[    0.244415] PCI: PCI BIOS revision 2.10 entry at 0xffe77, last bus=6
[    0.248003] PCI: Using configuration type 1 for base access
[    0.252002] PCI: Using configuration type 1 for extended access
[    0.256534] bio: create slab <bio-0> at 0
[    0.260341] ACPI: EC: Look up EC in DSDT
[    0.264162] ACPI: Executed 2 blocks of module-level executable AML code
[    0.272834] ACPI: Interpreter enabled
[    0.276003] ACPI: (supports S0 S1 S2 S3 S4 S5)
[    0.280864] ACPI: BIOS offers _BFS
[    0.284002] ACPI: If "acpi.bfs=1" improves resume, please notify linux-acpi@vger.kernel.org
[    0.288002] ACPI: Using IOAPIC for interrupt routing
[    0.293625] ACPI: Power Resource [PFN0] (on)
[    0.296126] ACPI: No dock devices found.
[    0.300091] ACPI Error (psargs-0359): [TOM2] Namespace lookup failure, AE_NOT_FOUND
[    0.308003] ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0._CRS] (Node f7016e70), AE_NOT_FOUND
[    0.321433] ACPI: PCI Root Bridge [PCI0] (0000:00)
[    0.324055] pci 0000:00:00.0: reg 1c 64bit mmio: [0xe0000000-0xffffffff]
[    0.324224] pci 0000:00:04.0: PME# supported from D0 D3hot D3cold
[    0.328003] pci 0000:00:04.0: PME# disabled
[    0.332050] pci 0000:00:05.0: PME# supported from D0 D3hot D3cold
[    0.336003] pci 0000:00:05.0: PME# disabled
[    0.340045] pci 0000:00:06.0: PME# supported from D0 D3hot D3cold
[    0.344003] pci 0000:00:06.0: PME# disabled
[    0.348050] pci 0000:00:07.0: PME# supported from D0 D3hot D3cold
[    0.352003] pci 0000:00:07.0: PME# disabled
[    0.356060] pci 0000:00:11.0: reg 10 io port: [0x3020-0x3027]
[    0.356067] pci 0000:00:11.0: reg 14 io port: [0x3040-0x3043]
[    0.356074] pci 0000:00:11.0: reg 18 io port: [0x3028-0x302f]
[    0.356083] pci 0000:00:11.0: reg 1c io port: [0x3044-0x3047]
[    0.356093] pci 0000:00:11.0: reg 20 io port: [0x3000-0x300f]
[    0.356103] pci 0000:00:11.0: reg 24 32bit mmio: [0xd8309000-0xd83093ff]
[    0.356122] pci 0000:00:11.0: set SATA to AHCI mode
[    0.360043] pci 0000:00:12.0: reg 10 32bit mmio: [0xd8304000-0xd8304fff]
[    0.360116] pci 0000:00:12.1: reg 10 32bit mmio: [0xd8305000-0xd8305fff]
[    0.360213] pci 0000:00:12.2: reg 10 32bit mmio: [0xd8309400-0xd83094ff]
[    0.360284] pci 0000:00:12.2: supports D1 D2
[    0.360285] pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot
[    0.364005] pci 0000:00:12.2: PME# disabled
[    0.368043] pci 0000:00:13.0: reg 10 32bit mmio: [0xd8306000-0xd8306fff]
[    0.368114] pci 0000:00:13.1: reg 10 32bit mmio: [0xd8307000-0xd8307fff]
[    0.368208] pci 0000:00:13.2: reg 10 32bit mmio: [0xd8309500-0xd83095ff]
[    0.368280] pci 0000:00:13.2: supports D1 D2
[    0.368281] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot
[    0.372005] pci 0000:00:13.2: PME# disabled
[    0.376137] pci 0000:00:14.1: reg 10 io port: [0x3030-0x3037]
[    0.376143] pci 0000:00:14.1: reg 14 io port: [0x3048-0x304b]
[    0.376156] pci 0000:00:14.1: reg 18 io port: [0x3038-0x303f]
[    0.376167] pci 0000:00:14.1: reg 1c io port: [0x304c-0x304f]
[    0.376174] pci 0000:00:14.1: reg 20 io port: [0x3010-0x301f]
[    0.376239] pci 0000:00:14.2: reg 10 64bit mmio: [0xd8300000-0xd8303fff]
[    0.376295] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
[    0.380008] pci 0000:00:14.2: PME# disabled
[    0.384135] pci 0000:00:14.5: reg 10 32bit mmio: [0xd8308000-0xd8308fff]
[    0.384282] pci 0000:01:05.0: reg 10 64bit mmio pref: [0xc8000000-0xcfffffff]
[    0.384288] pci 0000:01:05.0: reg 18 64bit mmio: [0xd8100000-0xd810ffff]
[    0.384291] pci 0000:01:05.0: reg 20 io port: [0x1000-0x10ff]
[    0.384295] pci 0000:01:05.0: reg 24 32bit mmio: [0xd8000000-0xd80fffff]
[    0.384307] pci 0000:01:05.0: supports D1 D2
[    0.384342] pci 0000:01:05.2: reg 10 64bit mmio: [0xd8110000-0xd8113fff]
[    0.384389] pci 0000:00:01.0: bridge io port: [0x1000-0x1fff]
[    0.384395] pci 0000:00:01.0: bridge 32bit mmio: [0xd8000000-0xd81fffff]
[    0.384399] pci 0000:00:01.0: bridge 64bit mmio pref: [0xc8000000-0xcfffffff]
[    0.384495] pci 0000:03:00.0: reg 10 io port: [0x2000-0x20ff]
[    0.384521] pci 0000:03:00.0: reg 18 64bit mmio pref: [0xd0004000-0xd0004fff]
[    0.384532] pci 0000:03:00.0: reg 20 64bit mmio pref: [0xd0000000-0xd0003fff]
[    0.384539] pci 0000:03:00.0: reg 30 32bit mmio pref: [0xd8200000-0xd821ffff]
[    0.384574] pci 0000:03:00.0: supports D1 D2
[    0.384575] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.388004] pci 0000:03:00.0: PME# disabled
[    0.392074] pci 0000:00:05.0: bridge io port: [0x2000-0x2fff]
[    0.392077] pci 0000:00:05.0: bridge 32bit mmio: [0xd8200000-0xd82fffff]
[    0.392081] pci 0000:00:05.0: bridge 64bit mmio pref: [0xd0000000-0xd00fffff]
[    0.392266] pci 0000:00:14.4: transparent bridge
[    0.396025] pci_bus 0000:00: on NUMA node 0
[    0.396028] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[    0.396093] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGPB._PRT]
[    0.396119] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PBR4._PRT]
[    0.396151] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PBR5._PRT]
[    0.396183] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PBR6._PRT]
[    0.396215] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PBR7._PRT]
[    0.396252] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PIBR._PRT]
[    0.400550] ACPI: PCI Interrupt Link [INTA] (IRQs 3 4 5 7 10 11 12 15) *0, disabled.
[    0.408267] ACPI: PCI Interrupt Link [INTB] (IRQs 3 4 5 7 10 11 12 15) *0, disabled.
[    0.416263] ACPI: PCI Interrupt Link [INTC] (IRQs 3 4 5 7 10 11 12 15) *0, disabled.
[    0.424270] ACPI: PCI Interrupt Link [INTD] (IRQs 3 4 5 7 10 11 12 15) *0, disabled.
[    0.432265] ACPI: PCI Interrupt Link [INTE] (IRQs 3 4 5 7 10 11 12 15) *0, disabled.
[    0.440265] ACPI: PCI Interrupt Link [INTF] (IRQs 9) *0, disabled.
[    0.445829] ACPI: PCI Interrupt Link [INTG] (IRQs 3 4 5 7 10 11 12 15) *0, disabled.
[    0.455325] ACPI: PCI Interrupt Link [INTH] (IRQs 3 4 5 7 10 11 12 15) *0, disabled.
[    0.463396] vgaarb: device added: PCI:0000:01:05.0,decodes=io+mem,owns=io+mem,locks=none
[    0.464003] vgaarb: loaded
[    0.468076] SCSI subsystem initialized
[    0.472028] libata version 3.00 loaded.
[    0.472071] usbcore: registered new interface driver usbfs
[    0.476015] usbcore: registered new interface driver hub
[    0.480018] usbcore: registered new device driver usb
[    0.484073] ACPI: WMI: Mapper loaded
[    0.488003] PCI: Using ACPI for IRQ routing
[    0.492133] NetLabel: Initializing
[    0.496003] NetLabel:  domain hash size = 128
[    0.500002] NetLabel:  protocols = UNLABELED CIPSOv4
[    0.504010] NetLabel:  unlabeled traffic allowed by default
[    0.508033] Switching to clocksource tsc
[    0.513062] AppArmor: AppArmor Filesystem Enabled
[    0.517754] pnp: PnP ACPI init
[    0.520817] ACPI: bus type pnp registered
[    0.525112] ACPI Error (psargs-0359): [TOM2] Namespace lookup failure, AE_NOT_FOUND
[    0.532814] ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0._CRS] (Node f7016e70), AE_NOT_FOUND
[    0.543691] pnp: PnP ACPI: found 6 devices
[    0.547786] ACPI: ACPI bus type pnp unregistered
[    0.552399] PnPBIOS: Disabled by ACPI PNP
[    0.591059] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01
[    0.596980] pci 0000:00:01.0:   IO window: 0x1000-0x1fff
[    0.602289] pci 0000:00:01.0:   MEM window: 0xd8000000-0xd81fffff
[    0.608372] pci 0000:00:01.0:   PREFETCH window: 0x000000c8000000-0x000000cfffffff
[    0.615926] pci 0000:00:04.0: PCI bridge, secondary bus 0000:02
[    0.621831] pci 0000:00:04.0:   IO window: disabled
[    0.626699] pci 0000:00:04.0:   MEM window: disabled
[    0.631657] pci 0000:00:04.0:   PREFETCH window: disabled
[    0.637059] pci 0000:00:05.0: PCI bridge, secondary bus 0000:03
[    0.642963] pci 0000:00:05.0:   IO window: 0x2000-0x2fff
[    0.648267] pci 0000:00:05.0:   MEM window: 0xd8200000-0xd82fffff
[    0.654346] pci 0000:00:05.0:   PREFETCH window: 0x000000d0000000-0x000000d00fffff
[    0.661898] pci 0000:00:06.0: PCI bridge, secondary bus 0000:04
[    0.667804] pci 0000:00:06.0:   IO window: disabled
[    0.672672] pci 0000:00:06.0:   MEM window: disabled
[    0.677625] pci 0000:00:06.0:   PREFETCH window: disabled
[    0.683013] pci 0000:00:07.0: PCI bridge, secondary bus 0000:05
[    0.688918] pci 0000:00:07.0:   IO window: disabled
[    0.693788] pci 0000:00:07.0:   MEM window: disabled
[    0.698748] pci 0000:00:07.0:   PREFETCH window: disabled
[    0.704136] pci 0000:00:14.4: PCI bridge, secondary bus 0000:06
[    0.710040] pci 0000:00:14.4:   IO window: disabled
[    0.714912] pci 0000:00:14.4:   MEM window: disabled
[    0.719879] pci 0000:00:14.4:   PREFETCH window: disabled
[    0.725287] pci 0000:00:04.0: setting latency timer to 64
[    0.725292] pci 0000:00:05.0: setting latency timer to 64
[    0.725298] pci 0000:00:06.0: setting latency timer to 64
[    0.725303] pci 0000:00:07.0: setting latency timer to 64
[    0.725312] pci_bus 0000:00: resource 0 io:  [0x00-0xffff]
[    0.725314] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff]
[    0.725316] pci_bus 0000:01: resource 0 io:  [0x1000-0x1fff]
[    0.725318] pci_bus 0000:01: resource 1 mem: [0xd8000000-0xd81fffff]
[    0.725320] pci_bus 0000:01: resource 2 pref mem [0xc8000000-0xcfffffff]
[    0.725322] pci_bus 0000:03: resource 0 io:  [0x2000-0x2fff]
[    0.725324] pci_bus 0000:03: resource 1 mem: [0xd8200000-0xd82fffff]
[    0.725326] pci_bus 0000:03: resource 2 pref mem [0xd0000000-0xd00fffff]
[    0.725328] pci_bus 0000:06: resource 3 io:  [0x00-0xffff]
[    0.725330] pci_bus 0000:06: resource 4 mem: [0x000000-0xffffffff]
[    0.725357] NET: Registered protocol family 2
[    0.729767] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[    0.737137] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[    0.745114] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[    0.752002] TCP: Hash tables configured (established 131072 bind 65536)
[    0.758598] TCP reno registered
[    0.761805] NET: Registered protocol family 1
[    0.766249] pci 0000:01:05.0: Boot video device
[    0.766415] cpufreq-nforce2: No nForce2 chipset.
[    0.771080] Trying to unpack rootfs image as initramfs...
[    0.776491] Scanning for low memory corruption every 60 seconds
[    0.787848] audit: initializing netlink socket (disabled)
[    0.799997] type=2000 audit(1295135042.799:1): initialized
[    0.823891] highmem bounce pool size: 64 pages
[    0.832017] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[    0.848869] VFS: Disk quotas dquot_6.5.2
[    0.852836] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[    0.868491] fuse init (API version 7.13)
[    0.875901] msgmni has been set to 1706
[    0.887978] alg: No test for stdrng (krng)
[    0.895871] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[    0.903252] io scheduler noop registered
[    0.907173] io scheduler anticipatory registered
[    0.911781] io scheduler deadline registered
[    0.935997] io scheduler cfq registered (default)
[    0.944130]   alloc irq_desc for 24 on node -1
[    0.944132]   alloc kstat_irqs on node -1
[    0.944139] pcieport 0000:00:04.0: irq 24 for MSI/MSI-X
[    0.944145] pcieport 0000:00:04.0: setting latency timer to 64
[    0.944225]   alloc irq_desc for 25 on node -1
[    0.944227]   alloc kstat_irqs on node -1
[    0.944232] pcieport 0000:00:05.0: irq 25 for MSI/MSI-X
[    0.944236] pcieport 0000:00:05.0: setting latency timer to 64
[    0.944307]   alloc irq_desc for 26 on node -1
[    0.944308]   alloc kstat_irqs on node -1
[    0.944311] pcieport 0000:00:06.0: irq 26 for MSI/MSI-X
[    0.944316] pcieport 0000:00:06.0: setting latency timer to 64
[    0.944385]   alloc irq_desc for 27 on node -1
[    0.944386]   alloc kstat_irqs on node -1
[    0.944389] pcieport 0000:00:07.0: irq 27 for MSI/MSI-X
[    0.944393] pcieport 0000:00:07.0: setting latency timer to 64
[    0.944443] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    0.955856] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    0.968066] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[    0.983977] ACPI: Power Button [PWRB]
[    0.987686] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[    1.007929] ACPI: Power Button [PWRF]
[    1.011725] fan PNP0C0B:00: registered as cooling_device0
[    1.027975] ACPI: Fan [FAN0] (on)
[    1.031515] processor LNXCPU:00: registered as cooling_device1
[    1.068145] thermal LNXTHERM:01: registered as thermal_zone0
[    1.080049] ACPI: Thermal Zone [TZ00] (40 C)
[    1.088930] hpet_acpi_add: no address or irqs in _CRS
[    1.093992] isapnp: Scanning for PnP cards...
[    1.108061] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    1.167954] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[    1.180703] brd: module loaded
[    1.188190] loop: module loaded
[    1.191401] input: Macintosh mouse button emulation as /devices/virtual/input/input2
[    1.208113]   alloc irq_desc for 16 on node -1
[    1.208115]   alloc kstat_irqs on node -1
[    1.208122] pata_acpi 0000:00:14.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    1.224159] Fixed MDIO Bus: probed
[    1.227575] PPP generic driver version 2.4.2
[    1.240099] tun: Universal TUN/TAP device driver, 1.6
[    1.245147] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[    1.303970] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    1.320081]   alloc irq_desc for 17 on node -1
[    1.320084]   alloc kstat_irqs on node -1
[    1.320091] ehci_hcd 0000:00:12.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[    1.332080] ehci_hcd 0000:00:12.2: EHCI Host Controller
[    1.344176] ehci_hcd 0000:00:12.2: new USB bus registered, assigned bus number 1
[    1.355064] Freeing initrd memory: 14819k freed
[    1.366191] ehci_hcd 0000:00:12.2: applying AMD SB600/SB700 USB freeze workaround
[    1.373677] ehci_hcd 0000:00:12.2: debug port 1
[    1.421996] ehci_hcd 0000:00:12.2: irq 17, io mem 0xd8309400
[    1.471412] ehci_hcd 0000:00:12.2: USB 2.0 started, EHCI 1.00
[    1.477254] usb usb1: configuration #1 chosen from 1 choice
[    1.482832] hub 1-0:1.0: USB hub found
[    1.486590] hub 1-0:1.0: 6 ports detected
[    1.490662]   alloc irq_desc for 19 on node -1
[    1.490664]   alloc kstat_irqs on node -1
[    1.490670] ehci_hcd 0000:00:13.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[    1.497803] ehci_hcd 0000:00:13.2: EHCI Host Controller
[    1.503047] ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 2
[    1.554145] ehci_hcd 0000:00:13.2: applying AMD SB600/SB700 USB freeze workaround
[    1.561629] ehci_hcd 0000:00:13.2: debug port 1
[    1.566174] ehci_hcd 0000:00:13.2: irq 19, io mem 0xd8309500
[    1.615347] ehci_hcd 0000:00:13.2: USB 2.0 started, EHCI 1.00
[    1.621142] usb usb2: configuration #1 chosen from 1 choice
[    1.626726] hub 2-0:1.0: USB hub found
[    1.630476] hub 2-0:1.0: 6 ports detected
[    1.634529] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    1.640712] ohci_hcd 0000:00:12.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    1.647840] ohci_hcd 0000:00:12.0: OHCI Host Controller
[    1.653073] ohci_hcd 0000:00:12.0: new USB bus registered, assigned bus number 3
[    1.703967] ohci_hcd 0000:00:12.0: irq 16, io mem 0xd8304000
[    1.753399] isapnp: No Plug & Play device found
[    1.768042] usb usb3: configuration #1 chosen from 1 choice
[    1.773621] hub 3-0:1.0: USB hub found
[    1.777375] hub 3-0:1.0: 3 ports detected
[    1.781421] ohci_hcd 0000:00:12.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    1.788546] ohci_hcd 0000:00:12.1: OHCI Host Controller
[    1.793777] ohci_hcd 0000:00:12.1: new USB bus registered, assigned bus number 4
[    1.801177] ohci_hcd 0000:00:12.1: irq 16, io mem 0xd8305000
[    1.864045] usb usb4: configuration #1 chosen from 1 choice
[    1.869621] hub 4-0:1.0: USB hub found
[    1.873379] hub 4-0:1.0: 3 ports detected
[    1.877412]   alloc irq_desc for 18 on node -1
[    1.877413]   alloc kstat_irqs on node -1
[    1.877416] ohci_hcd 0000:00:13.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[    1.884558] ohci_hcd 0000:00:13.0: OHCI Host Controller
[    1.889819] ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 5
[    1.897214] ohci_hcd 0000:00:13.0: irq 18, io mem 0xd8306000
[    1.960033] usb usb5: configuration #1 chosen from 1 choice
[    1.965612] hub 5-0:1.0: USB hub found
[    1.969369] hub 5-0:1.0: 3 ports detected
[    1.973398] ohci_hcd 0000:00:13.1: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[    1.980536] ohci_hcd 0000:00:13.1: OHCI Host Controller
[    1.985768] ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 6
[    1.993154] ohci_hcd 0000:00:13.1: irq 18, io mem 0xd8307000
[    2.056034] usb usb6: configuration #1 chosen from 1 choice
[    2.061606] hub 6-0:1.0: USB hub found
[    2.065353] hub 6-0:1.0: 3 ports detected
[    2.069391] ohci_hcd 0000:00:14.5: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[    2.076533] ohci_hcd 0000:00:14.5: OHCI Host Controller
[    2.081768] ohci_hcd 0000:00:14.5: new USB bus registered, assigned bus number 7
[    2.089153] ohci_hcd 0000:00:14.5: irq 18, io mem 0xd8308000
[    2.152038] usb usb7: configuration #1 chosen from 1 choice
[    2.157615] hub 7-0:1.0: USB hub found
[    2.161372] hub 7-0:1.0: 2 ports detected
[    2.165411] uhci_hcd: USB Universal Host Controller Interface driver
[    2.171816] PNP: No PS/2 controller found. Probing ports directly.
[    2.178374] serio: i8042 KBD port at 0x60,0x64 irq 1
[    2.183335] serio: i8042 AUX port at 0x60,0x64 irq 12
[    2.188446] mice: PS/2 mouse device common for all mice
[    2.193742] rtc_cmos 00:01: RTC can wake from S4
[    2.198392] rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0
[    2.204519] rtc0: alarms up to one day, 114 bytes nvram
[    2.209811] device-mapper: uevent: version 1.0.3
[    2.214517] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com
[    2.222972] device-mapper: multipath: version 1.1.0 loaded
[    2.228459] device-mapper: multipath round-robin: version 1.0.0 loaded
[    2.235051] EISA: Probing bus 0 at eisa.0
[    2.239101] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
[    2.247699] Cannot allocate resource for EISA slot 1
[    2.252688] Cannot allocate resource for EISA slot 2
[    2.257645] Cannot allocate resource for EISA slot 3
[    2.262621] EISA: Detected 0 cards.
[    2.266146] cpuidle: using governor ladder
[    2.270235] cpuidle: using governor menu
[    2.274443] TCP cubic registered
[    2.277770] NET: Registered protocol family 10
[    2.282523] lo: Disabled Privacy Extensions
[    2.286909] NET: Registered protocol family 17
[    2.291366] powernow-k8: Found 1 AMD Sempron(tm) 140 type unknown processors (1 cpu cores) (version 2.20.00)
[    2.301229] powernow-k8:    0 : pstate 0 (2700 MHz)
[    2.306099] powernow-k8:    1 : pstate 1 (1900 MHz)
[    2.311084] Using IPI No-Shortcut mode
[    2.314874] PM: Resume from disk failed.
[    2.314884] registered taskstats version 1
[    2.319290]   Magic number: 11:221:757
[    2.323110] rtc_cmos 00:01: setting system clock to 2011-01-15 23:44:06 UTC (1295135046)
[    2.331181] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[    2.337173] EDD information not available.
[    2.341297] Freeing unused kernel memory: 656k freed
[    2.346550] Write protecting the kernel text: 4684k
[    2.351443] Write protecting the kernel read-only data: 1760k
[    2.367300] udev: starting version 151
[    2.473641] vga16fb: initializing
[    2.473645] vga16fb: mapped to 0xc00a0000
[    2.480764] Linux agpgart interface v0.103
[    2.493009] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[    2.498953] scsi0 : pata_atiixp
[    2.503947] scsi1 : pata_atiixp
[    2.507517] fb0: VGA16 VGA frame buffer device
[    2.517636] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x3010 irq 14
[    2.525134] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x3018 irq 15
[    2.532916] r8169 0000:03:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[    2.592952] r8169 0000:03:00.0: setting latency timer to 64
[    2.592989]   alloc irq_desc for 28 on node -1
[    2.592991]   alloc kstat_irqs on node -1
[    2.593002] r8169 0000:03:00.0: irq 28 for MSI/MSI-X
[    2.593469] eth0: RTL8168d/8111d at 0xf814c000, 44:87:fc:e4:0d:bb, XID 081000c0 IRQ 28
[    2.593471] r8169: eth0: Missing Free firmware
[    2.594863] ahci 0000:00:11.0: version 3.0
[    2.594872]   alloc irq_desc for 22 on node -1
[    2.594873]   alloc kstat_irqs on node -1
[    2.594884] ahci 0000:00:11.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[    2.595021] ahci 0000:00:11.0: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl SATA mode
[    2.595024] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part ccc 
[    2.595465] scsi2 : ahci
[    2.595538] scsi3 : ahci
[    2.595595] scsi4 : ahci
[    2.595650] scsi5 : ahci
[    2.595737] ata3: SATA max UDMA/133 abar m1024@0xd8309000 port 0xd8309100 irq 22
[    2.595741] ata4: SATA max UDMA/133 abar m1024@0xd8309000 port 0xd8309180 irq 22
[    2.595747] ata5: SATA max UDMA/133 abar m1024@0xd8309000 port 0xd8309200 irq 22
[    2.595753] ata6: SATA max UDMA/133 abar m1024@0xd8309000 port 0xd8309280 irq 22
[    2.731651] Console: switching to colour frame buffer device 80x30
[    2.937566] ata2.00: ATA-7: ST3200827A, 3.AAH, max UDMA/100
[    2.943540] ata2.00: 390721968 sectors, multi 0: LBA48 
[    2.949041] ata2.00: limited to UDMA/33 due to 40-wire cable
[    2.988026] ata6: SATA link down (SStatus 0 SControl 300)
[    2.993819] ata4: SATA link down (SStatus 0 SControl 300)
[    2.999584] ata5: SATA link down (SStatus 0 SControl 300)
[    3.005402] ata3: SATA link down (SStatus 0 SControl 300)
[    3.012297] ata2.00: configured for UDMA/33
[    3.016827] scsi 1:0:0:0: Direct-Access     ATA      ST3200827A       3.AA PQ: 0 ANSI: 5
[    3.025525] sd 1:0:0:0: [sda] 390721968 512-byte logical blocks: (200 GB/186 GiB)
[    3.033648] sd 1:0:0:0: Attached scsi generic sg0 type 0
[    3.039323] sd 1:0:0:0: [sda] Write Protect is off
[    3.044361] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    3.044447] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    3.054135]  sda: sda1 sda2 < sda5 sda6 >
[    3.094306] sd 1:0:0:0: [sda] Attached SCSI disk
[    3.460374] xor: automatically using best checksumming function: pIII_sse
[    3.488003]    pIII_sse  : 10863.000 MB/sec
[    3.492470] xor: using function: pIII_sse (10863.000 MB/sec)
[    3.500499] device-mapper: dm-raid45: initialized v0.2594b
[    3.624514] EXT4-fs (sda1): mounted filesystem with ordered data mode
[   14.361100] udev: starting version 151
[   14.455374] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[   14.460191] Adding 1244996k swap on /dev/sda5.  Priority:-1 extents:1 across:1244996k 
[   14.468554] ACPI: resource piix4_smbus [0xb00-0xb07] conflicts with ACPI region SMB0 [0xb00-0xb0b]
[   14.468557] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   14.513218] udev: renamed network interface eth0 to eth5
[   14.514125] lp: driver loaded but no devices found
[   14.794518] HDA Intel 0000:00:14.2: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[   15.020725] input: HDA ATI SB Line In at Ext Rear Jack as /devices/pci0000:00/0000:00:14.2/sound/card0/input4
[   15.020877] input: HDA ATI SB Mic at Ext Front Jack as /devices/pci0000:00/0000:00:14.2/sound/card0/input5
[   15.021006] input: HDA ATI SB Mic at Ext Rear Jack as /devices/pci0000:00/0000:00:14.2/sound/card0/input6
[   15.021131] input: HDA ATI SB Speaker at Ext Rear Jack as /devices/pci0000:00/0000:00:14.2/sound/card0/input7
[   15.021253] input: HDA ATI SB HP Out at Ext Front Jack as /devices/pci0000:00/0000:00:14.2/sound/card0/input8
[   15.022166] HDA Intel 0000:01:05.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[   15.626017] kjournald starting.  Commit interval 5 seconds
[   15.626362] EXT3 FS on sda6, internal journal
[   15.626366] EXT3-fs: mounted filesystem with ordered data mode.
[   15.787718] r8169: eth5: link down
[   15.788193] ADDRCONF(NETDEV_UP): eth5: link is not ready
[   16.127933] pci 0000:01:05.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[   16.168694] [drm] Initialized drm 1.1.0 20060810
[   16.217130] [drm] Initialized radeon 1.32.0 20080528 for 0000:01:05.0 on minor 0
[   16.858378] [drm] Setting GART location based on new memory map
[   16.858999] [drm] Loading RS690/RS740 Microcode
[   16.859001] radeon_cp.0: Missing Free firmware
[   16.865360] platform radeon_cp.0: firmware: requesting /*(DEBLOBBED)*/
[   16.878804] radeon_cp: Failed to load firmware "/*(DEBLOBBED)*/"
[   16.885117] [drm:radeon_do_init_cp] *ERROR* Failed to load firmware!
[   20.017075] hda-intel: IRQ timing workaround is activated for card #1. Suggest a bigger bdl_pos_adj.
[   20.317641] hda-intel: IRQ timing workaround is activated for card #0. Suggest a bigger bdl_pos_adj.
[   40.424014] usb 5-1: new low speed USB device using ohci_hcd and address 2
[   40.591454] usb 5-1: configuration #1 chosen from 1 choice
[   40.652918] usbcore: registered new interface driver hiddev
[   40.658074] input: USB Optical Mouse as /devices/pci0000:00/0000:00:13.0/usb5/5-1/5-1:1.0/input/input9
[   40.658206] generic-usb 0003:15CA:00C3.0001: input,hidraw0: USB HID v1.10 Mouse [USB Optical Mouse] on usb-0000:00:13.0-1/input0
[   40.658226] usbcore: registered new interface driver usbhid
[   40.658742] usbhid: v2.6:USB HID core driver
[   85.020012] usb 5-2: new full speed USB device using ohci_hcd and address 3
[   85.198439] usb 5-2: configuration #1 chosen from 1 choice
[   85.216076] Linux video capture interface: v2.00
[   85.247715] gspca: main v2.7.0 registered
[   85.252944] gspca: probing 0ac8:303b
[   87.088829] zc3xx: probe 2wr ov vga 0x0000
[   87.144698] zc3xx: probe sensor -> 0011
[   87.144701] zc3xx: Find Sensor HV7131R(c)
[   87.152765] gspca: probe ok
[   87.152784] usbcore: registered new interface driver zc3xx
[   87.152786] zc3xx: registered
[  157.696483] zc3xx: probe 2wr ov vga 0x0000
[  172.596318] usb 5-2: USB disconnect, address 3
[  172.597325] gspca: disconnect complete
[  274.791406] r8169: eth5: link up
[  274.791624] ADDRCONF(NETDEV_CHANGE): eth5: link becomes ready
[  284.980007] eth5: no IPv6 routers present
