<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 TRANSITIONAL//EN">
<HTML>
<HEAD>
<META HTTP-EQUIV="Content-Type" CONTENT="text/html; CHARSET=UTF-8">
<META NAME="GENERATOR" CONTENT="GtkHTML/3.28.3">
</HEAD>
<BODY>
Hi all,<BR>
<BR>
Signed-off: Marc Bertens <<A HREF="mailto:mbertens@xs4all.nl">mbertens@xs4all.nl</A>><BR>
Tested-by: Marc Bertens<<A HREF="mailto:mbertens@xs4all.nl">mbertens@xs4all.nl</A>> <BR>
<BR>
I made some new patches for the Nokia IP530, therefore my last patch submission can be discarded.<BR>
<BR>
1. 21143PD driver; I removed the not needed stuff from there and tested without and all worked fine.<BR>
<BR>
2. Patched the devicetree.cb; added some comments and commented out the setting of the GPIO lines, this was unnecessary. <BR>
<BR>
3. nokia/Kconfig; added a description in de help about which board revisions are supported.<BR>
<BR>
4. ip530/Kconfig; added the CPU model, removed the PIRQ_ROUTE and set the IRQ_SLOT_COUNT to 1, this last is needed by the<BR>
header files, because those structures are still used by the code, see pirq_table.c<BR>
<BR>
5. ip530/mainboard.c; Now the identification of the physical system is show in the boot up of the machine, like;<BR>
* System type, should be IP530, otherwise a warning is given. <BR>
* Board number <BR>
* Mfg. P/N<BR>
* Mfg. rev.<BR>
* Serial number<BR>
All these read from the SPI eeprom behind the SuperIO<BR>
<BR>
6. The sourcecode files for the superIO-SPI interface in the Nokia-IP530. <BR>
<BR>
Stefan: please drop that last patch submission of mine. <BR>
<BR>
Thats all folks....<BR>
<BR>
<BR>
Marc <BR>
<BR>
</BODY>
</HTML>