<div dir="ltr"><div><div><div><div>Hi, I was hoping someone could help me out or point me in the right direction with a tyan s2912-e board not booting with coreboot,<br></div>2x 2419 opterons<br></div>16GB ECC DDR2 RAM<br>
</div>Onbard SAS LSI 1064e<br></div>AMD Radeon 7850 2GB<br><div><div><div><div><br>the codes on the onboard POST display (from port 80) are changing so fast that I cannot make them out however it is seems by the pattern of codes outputted that it is in a loop, are there any particular settings in the menuconfig that are required? Or have I missed something obvious?<br>
<br></div><div>The system flashes with flashrom no problem<br></div><div>I have tried booting with 1 CPU and just 1 stick of RAM, removed the PCIe GFX card. I have also built coreboot with and without the onboard VGA bios but none of this makes any difference, any help would be greatly appreciated. <br>
</div></div></div></div></div>