<div dir="ltr">Hello Cheng,<div><br></div><div>Again, I'll repeat my questions:</div><div>[1] Are you talking about BIOS, where you are enabling in LPSS ACPI (disabling automatically PCI) mode?</div><div>[2] I need better explanation of your use case... Are you using BYT MR4, then MR5, or instead MR4 BIOS, or...?</div><div>[3] For WIN8.1 you need to have the following:</div><div><div>      For BIOS to work (and get rid off these yellow triangles with question marks):</div><div>      [A] ACPI mode in BIOS: South Cluster Configuration -> LPSS & SCC Configuration -> LPSS LPSS & SCC</div><div>           Devices Mode -> Select "ACPI Mode";<br></div><div>      [B] The GPIO controller driver is/should be prerequisite for HS-UART driver. There is a document named:</div><div>            Intel_Processor_Win8_IO_Drivers_Gold_MR1. You should ask for it from INTEL support. If installed</div><div>            correctly, you should see HS-UART Controller device under System Devices in Device Manager. Also</div><div>            new unknown devices should appear: ACPI\BCM2E1A and ACPI\BCM4752. These devices are for</div><div>            HS-UART Sub Device Driver;</div><div>      [C] You should compile the UART Sub Device Driver (by 1.2.1 of Intel Atom E3800 Win8.1 HS-UART Sub</div><div>            Device Driver Sample Code Guide_1.0), and install after building them. After that you should see Ports in</div><div>            Device Manager.</div></div><div><br></div><div>Zoran</div></div><div class="gmail_extra"><br><div class="gmail_quote">On Fri, May 13, 2016 at 5:43 AM, cheng yichen <span dir="ltr"><<a href="mailto:blessyichen@gmail.com" target="_blank">blessyichen@gmail.com</a>></span> wrote:<br><blockquote class="gmail_quote" style="margin:0 0 0 .8ex;border-left:1px #ccc solid;padding-left:1ex"><div dir="ltr"><div style="font-size:14px"><br></div><div style="font-size:14px">HI all</div><div style="font-size:14px"><br></div><div style="font-size:14px">I try to enable Lpss device(i2c hs-uart) with ACPI mdoe.</div><div style="font-size:14px">i2c and hs-uart will show yellow mark in device manager with win8.1. </div><div style="font-size:14px">but I can't find the same issue in intel coreboot(versrion MR5).</div><div style="font-size:14px">Do you have any idea for the issue? Thank you </div></div>
<br>--<br>
coreboot mailing list: <a href="mailto:coreboot@coreboot.org">coreboot@coreboot.org</a><br>
<a href="https://www.coreboot.org/mailman/listinfo/coreboot" rel="noreferrer" target="_blank">https://www.coreboot.org/mailman/listinfo/coreboot</a><br></blockquote></div><br></div>