<div dir="ltr">Hello/Privet Alex,<div><br></div><div>I'll try to help you, since I am not too much familiar with the eMMC drivers in Coreboot. I bet there are none, but there must be BCT support as you outlined it: <span style="font-size:12.8px"><i>"Enable PCI mode for SCC devices" (PcdSccEnablePciMode)"</i>.</span></div><div><span style="font-size:12.8px"><br></span></div><div><span style="font-size:12.8px">I never tried to set eMMC on BayTrail on Coreboot (in fact, I never tried BayTrail with Coreboot, but I did try others' companies Coreboot images on once upon a time BayleyBay Fab.3 E3826 (dual Core) CRB). But I did try all of (and more) what you are writing here with various INTEL and AMI BIOSes. It is off topic.</span></div><div><span style="font-size:12.8px"><br></span></div><div><span style="font-size:12.8px">Here is what I did try on some other customized platform, using E3845 B3 and D0 steppings, and AMI BIOS. This is how I did setup with South Bridge, SCC controller:</span></div><div><span style="font-size:12.8px"><br></span></div><div><span style="font-size:12.8px"><img src="cid:ii_156784f3a73ed4c5" alt="Inline image 1" width="473" height="181"><br></span></div><div><span style="font-size:12.8px"><br></span></div><div><span style="font-size:12.8px">Indeed, I was able to install Linux on eMMC (it was eMMC 5.0 compliant, 32GB size, paired with BYT-I as written above, which supports up to eMMC 4.51), namely Fedora 21 (if I recall correctly), and it worked seamlessly.</span></div><div><span style="font-size:12.8px"><br></span></div><div><span style="font-size:12.8px">I admit, I never tried WIN, but I do know that there are special INTEL drivers developed for embedded WIN (for WEC 7 and WEC 2013). I am not sure if such amenities exist for WES 7 (indirectly for WIN 7), you should check these yourself: <a href="http://www.intel.com/content/www/us/en/embedded/products/bay-trail/software-and-drivers.html">http://www.intel.com/content/www/us/en/embedded/products/bay-trail/software-and-drivers.html</a></span></div><div><span style="font-size:12.8px"><br></span></div><div><span style="font-size:12.8px">Maybe you can find some WIN eMMC driver support on this site. At least I hope. Hope dies last. ;-)</span></div><div><span style="font-size:12.8px"><br></span></div><div><span style="font-size:12.8px">Hope this helps/nadejus6 eto pomozet,</span></div><div><span style="font-size:12.8px">Zoran</span></div></div><div class="gmail_extra"><br><div class="gmail_quote">On Tue, Aug 9, 2016 at 11:10 AM, szr <span dir="ltr"><<a href="mailto:iszr@yandex.ru" target="_blank">iszr@yandex.ru</a>></span> wrote:<br><blockquote class="gmail_quote" style="margin:0 0 0 .8ex;border-left:1px #ccc solid;padding-left:1ex">Hello.<br>
<br>
I have the board with Intel Baytrail E3845 and eMMC card v4.41, use coreboot 4.4, seabios 1.9.1. In PCI mode eMMC work, I can install and boot Ubuntu. The problem in Windows 8/10, which see card as "removable" disk, and therefore, do not allow to install on it.<br>
<br>
Excuse me, I have the simple question. How switch the MMC controller to ACPI mode? If set "Enable PCI mode for SCC devices" (PcdSccEnablePciMode) = Disabled in BCT, a controller be lost in lspci, but system no detect a ACPI device (checked in Ubuntu).<br>
<br>
I would be grateful for any help.<br>
<br>
Thanks,<br>
Alex.<br>
<span class="HOEnZb"><font color="#888888"><br>
--<br>
coreboot mailing list: <a href="mailto:coreboot@coreboot.org">coreboot@coreboot.org</a><br>
<a href="https://www.coreboot.org/mailman/listinfo/coreboot" rel="noreferrer" target="_blank">https://www.coreboot.org/<wbr>mailman/listinfo/coreboot</a><br>
</font></span></blockquote></div><br></div>