<div dir="ltr"><div><div><div>Hello<br><br></div>Here is the current status of my W520:<br> - native video init gives a garbled image (picture available upon 
request lol). it may be due to the resolution of the screen being hardcoded 
somewhere, or more likely me using the wrong information since the W520 uses 1980x1080<br></div><div> - non native video works fine<br> - with native ram init, the memory tends to be unstable unless 
great care is used (basically blindly increasing SPD latencies and 
setting max_mem_clock_mhz=666)<br></div><div> - with native ram init, even with that sometimes the boots stop on:<br>"discover timC write:<br>CPB<br>t123: 1048, 6000, 7620"<br> - with non native ram init, there is no video<br> - various dmaerr unless iommu is disabled<br> - the USB3 controller is not showing in lscpi, even if I am quite sure it is on the right PCIE (likely due to the RCBA32 I am using)<br></div><div> - the modem codec is not detected by snd-hda-intel even if the probe is forced<br></div><div> - some other unknown things may not work.<br></div><div><br></div>At the moment, I am trying to advance with native video first as it is a low hanging fruit: I'm quite sure the gfx.did or LVDS settings in my devicetree must be wrong.<br><br>How can I guess the right ones after booting with the videorom?<br><br></div><div>Thanks<br></div><div>Charlotte<br></div></div>