<div dir="ltr">Hi Again,<div><br></div><div>I tried to find out the details for following error</div><div><br></div><div>ata1: SATA link down (SStatus 4 SControl 300)<br></div><div><br></div><div>As per status register description</div><div><br></div><div>SStatus 4 : Phy in offline mode as a result of the interface being disabled or running in a
BIST loopback mode
<br></div><div><br></div><div>Is there any chance that coreboot/grub/Linux is putting SATA in to BIST loopback mode?</div><div><br></div><div>I am trying to understand who is responsible for SATA Linux status 4 and possible candidates are</div><div>a) coreboot</div><div>b) grub</div><div>c) Linux</div><div><br></div><div>Looking forward to your expert advice</div><div><br></div><div><br></div><div>Thanks</div></div><div class="gmail_extra"><br><div class="gmail_quote">On Fri, Mar 3, 2017 at 9:29 PM, Gailu Singh <span dir="ltr"><<a href="mailto:gailu96@gmail.com" target="_blank">gailu96@gmail.com</a>></span> wrote:<br><blockquote class="gmail_quote" style="margin:0 0 0 .8ex;border-left:1px #ccc solid;padding-left:1ex"><div dir="ltr">Hi Experts,<div><br></div><div>I am trying to boot Linux 4.1 with coreboot and grub but SATA drive fails with error "ata1: SATA link down (SStatus 4 SControl 300)". It is interesting that GRUB2 can use the SATA drive without issue and able to load kernel from SATA disk.</div><div><br></div><div>If I use same SATA Drive with Coreboot+UEFI payload then Linux driver just works fine and I am able to boot linux.</div><div><br></div><div>Any Idea What might be going wrong with Linux Driver. Does it expect something from BIOS/Coreboot that is not fulfilled</div><div><br></div><div>Linux boot logs:</div><div>---------------------</div><div><div>Initializing cgroup subsys cpuset</div><div>Initializing cgroup subsys cpu</div><div>Initializing cgroup subsys cpuacct</div><div>Linux version 4.1.21-WR8.0.0.11_standard (vgahlaut@ubuntu) (gcc version 5.2.0 (Wind River Linux 5.2.0-8.0-intel-apollolake-i-<wbr>64) ) #1 SMP PREEMPT Mon Feb 6 18:38:46 PST 2017</div><div>Command line: BOOT_IMAGE=(ahci0,msdos1)/<wbr>boot/bzImage root=/dev/sda1 rootdelay=10 console=ttyS2,115200</div><div>KERNEL supported cpus:</div><div> Intel GenuineIntel</div><div> AMD AuthenticAMD</div><div> Centaur CentaurHauls</div><div>e820: BIOS-provided physical RAM map:</div><div>BIOS-e820: [mem 0x0000000000000000-<wbr>0x0000000000000fff] type 16</div><div>BIOS-e820: [mem 0x0000000000001000-<wbr>0x000000000009ffff] usable</div><div>BIOS-e820: [mem 0x00000000000a0000-<wbr>0x00000000000fffff] reserved</div><div>BIOS-e820: [mem 0x0000000000100000-<wbr>0x000000000fffffff] usable</div><div>BIOS-e820: [mem 0x0000000010000000-<wbr>0x0000000012150fff] reserved</div><div>BIOS-e820: [mem 0x0000000012151000-<wbr>0x000000007a64ffff] usable</div><div>BIOS-e820: [mem 0x000000007a650000-<wbr>0x000000007affffff] type 16</div><div>BIOS-e820: [mem 0x000000007b000000-<wbr>0x000000007fffffff] reserved</div><div>BIOS-e820: [mem 0x00000000d0000000-<wbr>0x00000000ffffffff] reserved</div><div>BIOS-e820: [mem 0x0000000100000000-<wbr>0x000000017fffffff] usable</div><div>NX (Execute Disable) protection: active</div><div>SMBIOS 2.7 present.</div><div>e820: last_pfn = 0x180000 max_arch_pfn = 0x400000000</div><div>PAT configuration [0-7]: WB WC UC- UC WB WC UC- UC </div><div>e820: last_pfn = 0x7a650 max_arch_pfn = 0x400000000</div><div>Scanning 1 areas for low memory corruption</div><div>Using GB pages for direct mapping</div><div>init_memory_mapping: [mem 0x00000000-0x000fffff]</div><div>init_memory_mapping: [mem 0x17fe00000-0x17fffffff]</div><div>init_memory_mapping: [mem 0x160000000-0x17fdfffff]</div><div>init_memory_mapping: [mem 0x00100000-0x0fffffff]</div><div>init_memory_mapping: [mem 0x12151000-0x7a64ffff]</div><div>init_memory_mapping: [mem 0x100000000-0x15fffffff]</div><div>ACPI: Early table checksum verification disabled</div><div>ACPI: RSDP 0x00000000000F0000 000024 (v02 CORE )</div><div>ACPI: XSDT 0x000000007A6690E0 00005C (v01 CORE COREBOOT 00000000 CORE 00000000)</div><div>ACPI: FACP 0x000000007A66BA60 00010C (v05 CORE COREBOOT 00000000 CORE 00000001)</div><div>ACPI BIOS Warning (bug): 32/64X length mismatch in FADT/Pm1aEventBlock: 32/16 (20150410/tbfadt-623)</div><div>ACPI BIOS Warning (bug): Invalid length for FADT/Pm1aEventBlock: 16, using default 32 (20150410/tbfadt-704)</div><div>ACPI: DSDT 0x000000007A669280 0027D8 (v05 COREv4 COREBOOT 20110725 INTL 20160831)</div><div>ACPI: FACS 0x000000007A669240 000040</div><div>ACPI: FACS 0x000000007A669240 000040</div><div>ACPI: SSDT 0x000000007A66BB70 000774 (v02 CORE COREBOOT 0000002A CORE 0000002A)</div><div>ACPI: MCFG 0x000000007A66C2F0 00003C (v01 CORE COREBOOT 00000000 CORE 00000000)</div><div>ACPI: TCPA 0x000000007A66C330 000032 (v02 CORE COREBOOT 00000000 CORE 00000000)</div><div>ACPI: TPM2 0x000000007A66C370 000034 (v04 CORE COREBOOT 00000000 CORE 00000000)</div><div>ACPI: APIC 0x000000007A66C3B0 00006C (v01 CORE COREBOOT 00000000 CORE 00000000)</div><div>ACPI: HPET 0x000000007A66C420 000038 (v01 CORE COREBOOT 00000000 CORE 00000000)</div><div>Zone ranges:</div><div> DMA [mem 0x0000000000001000-<wbr>0x0000000000ffffff]</div><div> DMA32 [mem 0x0000000001000000-<wbr>0x00000000ffffffff]</div><div> Normal [mem 0x0000000100000000-<wbr>0x000000017fffffff]</div><div>Movable zone start for each node</div><div>Early memory node ranges</div><div> node 0: [mem 0x0000000000001000-<wbr>0x000000000009ffff]</div><div> node 0: [mem 0x0000000000100000-<wbr>0x000000000fffffff]</div><div> node 0: [mem 0x0000000012151000-<wbr>0x000000007a64ffff]</div><div> node 0: [mem 0x0000000100000000-<wbr>0x000000017fffffff]</div><div>Initmem setup node 0 [mem 0x0000000000001000-<wbr>0x000000017fffffff]</div><div>ACPI: PM-Timer IO Port: 0x408</div><div>IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-119</div><div>ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)</div><div>ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)</div><div>Using ACPI (MADT) for SMP configuration information</div><div>ACPI: HPET id: 0x8086a701 base: 0xfed00000</div><div>smpboot: Allowing 4 CPUs, 0 hotplug CPUs</div><div>PM: Registered nosave memory: [mem 0x00000000-0x00000fff]</div><div>PM: Registered nosave memory: [mem 0x000a0000-0x000fffff]</div><div>PM: Registered nosave memory: [mem 0x10000000-0x12150fff]</div><div>PM: Registered nosave memory: [mem 0x7a650000-0x7affffff]</div><div>PM: Registered nosave memory: [mem 0x7b000000-0x7fffffff]</div><div>PM: Registered nosave memory: [mem 0x80000000-0xcfffffff]</div><div>PM: Registered nosave memory: [mem 0xd0000000-0xffffffff]</div><div>e820: [mem 0x80000000-0xcfffffff] available for PCI devices</div><div>clocksource refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns</div><div>setup_percpu: NR_CPUS:4 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1</div><div>PERCPU: Embedded 32 pages/cpu @ffff88017fc00000 s93912 r8192 d28968 u524288</div><div>Built 1 zonelists in Zone order, mobility grouping on. Total pages: 1001076</div><div>Kernel command line: BOOT_IMAGE=(ahci0,msdos1)/<wbr>boot/bzImage root=/dev/sda1 rootdelay=10 console=ttyS2,115200</div><div>PID hash table entries: 4096 (order: 3, 32768 bytes)</div><div>Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)</div><div>Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)</div><div>xsave: enabled xstate_bv 0x1b, cntxt size 0x440 using standard form</div><div>Memory: 3909396K/4067960K available (10570K kernel code, 1220K rwdata, 4084K rodata, 1380K init, 1068K bss, 158564K reserved, 0K cma-reserved)</div><div>SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1</div><div>Preemptible hierarchical RCU implementation.</div><div><span class="m_8028762376858305838gmail-Apple-tab-span" style="white-space:pre-wrap"> </span>Additional per-CPU info printed with stalls.</div><div>NR_IRQS:4352 nr_irqs:1024 16</div><div>Console: colour dummy device 80x25</div><div>console [ttyS2] enabled</div><div>clocksource hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 99544814920 ns</div><div>tsc: PIT calibration matches HPET. 1 loops</div><div>tsc: Detected 1593.639 MHz processor</div><div>Calibrating delay loop (skipped), value calculated using timer frequency.. 3187.27 BogoMIPS (lpj=1593639)</div><div>pid_max: default: 32768 minimum: 301</div><div>ACPI: Core revision 20150410</div><div>ACPI: 2 ACPI AML tables successfully acquired and loaded</div><div>Security Framework initialized</div><div>Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)</div><div>Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes)</div><div>Initializing cgroup subsys blkio</div><div>Initializing cgroup subsys memory</div><div>Initializing cgroup subsys devices</div><div>Initializing cgroup subsys freezer</div><div>Initializing cgroup subsys net_cls</div><div>Initializing cgroup subsys debug</div><div>CPU: Physical Processor ID: 0</div><div>CPU: Processor Core ID: 0</div><div>mce: CPU supports 7 MCE banks</div><div>CPU0: Thermal monitoring enabled (TM1)</div><div>Last level iTLB entries: 4KB 48, 2MB 0, 4MB 0</div><div>Last level dTLB entries: 4KB 0, 2MB 0, 4MB 0, 1GB 0</div><div>Freeing SMP alternatives memory: 36K (ffffffff8228c000 - ffffffff82295000)</div><div>ftrace: allocating 36317 entries in 142 pages</div><div>x2apic: IRQ remapping doesn't support X2APIC mode</div><div>..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1</div><div>smpboot: CPU0: Intel(R) Atom(TM) Processor E3950 @ 1.60GHz (family: 0x6, model: 0x5c, stepping: 0x9)</div><div>Performance Events: PEBS fmt3+, 32-deep LBR, Goldmont events, full-width counters, Intel PMU driver.</div><div>... version: 4</div><div>... bit width: 48</div><div>... generic registers: 4</div><div>... value mask: 0000ffffffffffff</div><div>... max period: 0000ffffffffffff</div><div>... fixed-purpose events: 3</div><div>... event mask: 000000070000000f</div><div>x86: Booting SMP configuration:</div><div>.... node #0, CPUs: #1 #2 #3</div><div>x86: Booted up 1 node, 4 CPUs</div><div>smpboot: Total of 4 processors activated (12749.11 BogoMIPS)</div><div>devtmpfs: initialized</div><div>clocksource jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns</div><div>xor: measuring software checksum speed</div><div> prefetch64-sse: 10212.000 MB/sec</div><div> generic_sse: 8832.000 MB/sec</div><div>xor: using function: prefetch64-sse (10212.000 MB/sec)</div><div>pinctrl core: initialized pinctrl subsystem</div><div>NET: Registered protocol family 16</div><div>cpuidle: using governor ladder</div><div>cpuidle: using governor menu</div><div><br></div><div>failed to register the SPI slaves...</div><div>ACPI: bus type PCI registered</div><div>PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)</div><div>PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820</div><div>PCI: Using configuration type 1 for base access</div><div>raid6: sse2x1 gen() 4566 MB/s</div><div>raid6: sse2x1 xor() 2697 MB/s</div><div>raid6: sse2x2 gen() 4988 MB/s</div><div>raid6: sse2x2 xor() 3156 MB/s</div><div>raid6: sse2x4 gen() 5699 MB/s</div><div>raid6: sse2x4 xor() 2541 MB/s</div><div>raid6: using algorithm sse2x4 gen() 5699 MB/s</div><div>raid6: .... xor() 2541 MB/s, rmw enabled</div><div>raid6: using ssse3x2 recovery algorithm</div><div>ACPI: Added _OSI(Module Device)</div><div>ACPI: Added _OSI(Processor Device)</div><div>ACPI: Added _OSI(3.0 _SCP Extensions)</div><div>ACPI: Added _OSI(Processor Aggregator Device)</div><div>ACPI: Executed 1 blocks of module-level executable AML code</div><div>ACPI: Interpreter enabled</div><div>ACPI: (supports S0 S3 S4 S5)</div><div>ACPI: Using IOAPIC for interrupt routing</div><div>PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug</div><div>ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])</div><div>acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]</div><div>acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]</div><div>PCI host bridge to bus 0000:00</div><div>pci_bus 0000:00: root bus resource [bus 00-ff]</div><div>pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]</div><div>pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]</div><div>pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]</div><div>pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000c3fff window]</div><div>pci_bus 0000:00: root bus resource [mem 0x000c4000-0x000c7fff window]</div><div>pci_bus 0000:00: root bus resource [mem 0x000c8000-0x000cbfff window]</div><div>pci_bus 0000:00: root bus resource [mem 0x000cc000-0x000cffff window]</div><div>pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff window]</div><div>pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff window]</div><div>pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff window]</div><div>pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff window]</div><div>pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff window]</div><div>pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff window]</div><div>pci_bus 0000:00: root bus resource [mem 0x000e8000-0x000ebfff window]</div><div>pci_bus 0000:00: root bus resource [mem 0x000ec000-0x000effff window]</div><div>pci_bus 0000:00: root bus resource [mem 0x000f0000-0x000fffff window]</div><div>pci_bus 0000:00: root bus resource [mem 0x7c000000-0x7fffffff window]</div><div>pci_bus 0000:00: root bus resource [mem 0x80000000-0xcfffffff window]</div><div>pci_bus 0000:00: root bus resource [mem 0xfed40000-0xfed44fff window]</div><div>pci 0000:00:13.0: PCI bridge to [bus 01]</div><div>pci 0000:00:13.2: PCI bridge to [bus 02]</div><div>pci 0000:00:13.3: PCI bridge to [bus 03]</div><div>pci 0000:00:14.0: PCI bridge to [bus 04]</div><div>pci 0000:00:14.1: PCI bridge to [bus 05]</div><div>pci 0000:02:00.0: Max Payload Size 128, but upstream 0000:00:13.2 set to 256; if necessary, use "pci=pcie_bus_safe" and report a bug</div><div>ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 11 12 14 *15), disabled.</div><div>ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 10 11 12 14 *15), disabled.</div><div>ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 11 12 14 *15), disabled.</div><div>ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 10 11 12 14 *15), disabled.</div><div>ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 11 12 14 *15), disabled.</div><div>ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 *15), disabled.</div><div>ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 11 12 14 *15), disabled.</div><div>ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 11 12 14 *15), disabled.</div><div>vgaarb: setting as boot device: PCI:0000:00:02.0</div><div>vgaarb: device added: PCI:0000:00:02.0,decodes=io+<wbr>mem,owns=io+mem,locks=none</div><div>vgaarb: loaded</div><div>vgaarb: bridge control possible 0000:00:02.0</div><div>SCSI subsystem initialized</div><div>ACPI: bus type USB registered</div><div>usbcore: registered new interface driver usbfs</div><div>usbcore: registered new interface driver hub</div><div>usbcore: registered new device driver usb</div><div>pps_core: LinuxPPS API ver. 1 registered</div><div>pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <<a href="mailto:giometti@linux.it" target="_blank">giometti@linux.it</a>></div><div>PTP clock support registered</div><div>EDAC MC: Ver: 3.0.0</div><div>Advanced Linux Sound Architecture Driver Initialized.</div><div>PCI: Using ACPI for IRQ routing</div><div>Bluetooth: Core ver 2.20</div><div>NET: Registered protocol family 31</div><div>Bluetooth: HCI device and connection manager initialized</div><div>Bluetooth: HCI socket layer initialized</div><div>Bluetooth: L2CAP socket layer initialized</div><div>Bluetooth: SCO socket layer initialized</div><div>hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0</div><div>hpet0: 8 comparators, 64-bit 19.200000 MHz counter</div><div>Switched to clocksource hpet</div><div>pnp: PnP ACPI init</div><div>system 00:00: [mem 0xd0000000-0xdfffffff] could not be reserved</div><div>system 00:00: [mem 0xe0000000-0xefffffff] has been reserved</div><div>system 00:00: [mem 0xfee00000-0xfeefffff] has been reserved</div><div>system 00:01: [io 0x0400-0x04fe] could not be reserved</div><div>pnp: PnP ACPI: found 3 devices</div><div>clocksource acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns</div><div>pci 0000:00:13.0: BAR 8: assigned [mem 0x80000000-0x801fffff]</div><div>pci 0000:00:13.0: BAR 9: assigned [mem 0x80200000-0x803fffff 64bit pref]</div><div>pci 0000:00:13.2: BAR 9: assigned [mem 0x80400000-0x805fffff 64bit pref]</div><div>pci 0000:00:14.0: BAR 8: assigned [mem 0x80600000-0x807fffff]</div><div>pci 0000:00:14.0: BAR 9: assigned [mem 0x80800000-0x809fffff 64bit pref]</div><div>pci 0000:00:14.1: BAR 8: assigned [mem 0x80a00000-0x80bfffff]</div><div>pci 0000:00:14.1: BAR 9: assigned [mem 0x80c00000-0x80dfffff 64bit pref]</div><div>pci 0000:00:13.0: BAR 7: assigned [io 0x3000-0x3fff]</div><div>pci 0000:00:14.0: BAR 7: assigned [io 0x4000-0x4fff]</div><div>pci 0000:00:14.1: BAR 7: assigned [io 0x5000-0x5fff]</div><div>pci 0000:00:13.0: PCI bridge to [bus 01]</div><div>pci 0000:00:13.0: bridge window [io 0x3000-0x3fff]</div><div>pci 0000:00:13.0: bridge window [mem 0x80000000-0x801fffff]</div><div>pci 0000:00:13.0: bridge window [mem 0x80200000-0x803fffff 64bit pref]</div><div>pci 0000:00:13.2: PCI bridge to [bus 02]</div><div>pci 0000:00:13.2: bridge window [io 0x1000-0x1fff]</div><div>pci 0000:00:13.2: bridge window [mem 0xc1300000-0xc13fffff]</div><div>pci 0000:00:13.2: bridge window [mem 0x80400000-0x805fffff 64bit pref]</div><div>pci 0000:00:13.3: PCI bridge to [bus 03]</div><div>pci 0000:00:14.0: PCI bridge to [bus 04]</div><div>pci 0000:00:14.0: bridge window [io 0x4000-0x4fff]</div><div>pci 0000:00:14.0: bridge window [mem 0x80600000-0x807fffff]</div><div>pci 0000:00:14.0: bridge window [mem 0x80800000-0x809fffff 64bit pref]</div><div>pci 0000:00:14.1: PCI bridge to [bus 05]</div><div>pci 0000:00:14.1: bridge window [io 0x5000-0x5fff]</div><div>pci 0000:00:14.1: bridge window [mem 0x80a00000-0x80bfffff]</div><div>pci 0000:00:14.1: bridge window [mem 0x80c00000-0x80dfffff 64bit pref]</div><div>NET: Registered protocol family 2</div><div>TCP established hash table entries: 32768 (order: 6, 262144 bytes)</div><div>TCP bind hash table entries: 32768 (order: 7, 524288 bytes)</div><div>TCP: Hash tables configured (established 32768 bind 32768)</div><div>UDP hash table entries: 2048 (order: 4, 65536 bytes)</div><div>UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)</div><div>NET: Registered protocol family 1</div><div>RPC: Registered named UNIX socket transport module.</div><div>RPC: Registered udp transport module.</div><div>RPC: Registered tcp transport module.</div><div>RPC: Registered tcp NFSv4.1 backchannel transport module.</div><div>PCI-DMA: Using software bounce buffering for IO (SWIOTLB)</div><div>software IO TLB [mem 0x76650000-0x7a650000] (64MB) mapped at [ffff880076650000-<wbr>ffff88007a64ffff]</div><div>microcode: CPU0 sig=0x506c9, pf=0x1, revision=0x1c</div><div>microcode: CPU1 sig=0x506c9, pf=0x1, revision=0x1c</div><div>microcode: CPU2 sig=0x506c9, pf=0x1, revision=0x1c</div><div>microcode: CPU3 sig=0x506c9, pf=0x1, revision=0x1c</div><div>microcode: Microcode Update Driver: v2.00 <<a href="mailto:tigran@aivazian.fsnet.co.uk" target="_blank">tigran@aivazian.fsnet.co.uk</a>>, Peter Oruba</div><div>Scanning for low memory corruption every 60 seconds</div><div>Apollo Lake Sideband Interface loading</div><div>i2c adapter not found</div><div>i2c adapter not found</div><div>futex hash table entries: 1024 (order: 4, 65536 bytes)</div><div>HugeTLB registered 1 GB page size, pre-allocated 0 pages</div><div>HugeTLB registered 2 MB page size, pre-allocated 0 pages</div><div>NFS: Registering the id_resolver key type</div><div>Key type id_resolver registered</div><div>Key type id_legacy registered</div><div>aufs 4.1-20150629</div><div>Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)</div><div>io scheduler noop registered</div><div>io scheduler deadline registered</div><div>io scheduler cfq registered (default)</div><div>pcieport 0000:00:13.0: enabling device (0104 -> 0107)</div><div>pcieport 0000:00:14.0: enabling device (0104 -> 0107)</div><div>pcieport 0000:00:14.1: enabling device (0104 -> 0107)</div><div>pcieport 0000:00:13.0: Signaling PME through PCIe PME interrupt</div><div>pcieport 0000:00:13.2: Signaling PME through PCIe PME interrupt</div><div>pci 0000:02:00.0: Signaling PME through PCIe PME interrupt</div><div>pcieport 0000:00:13.3: Signaling PME through PCIe PME interrupt</div><div>pcieport 0000:00:14.0: Signaling PME through PCIe PME interrupt</div><div>pcieport 0000:00:14.1: Signaling PME through PCIe PME interrupt</div><div>pci_hotplug: PCI Hot Plug PCI Core version: 0.5</div><div>efifb: probing for efifb</div><div>efifb: framebuffer at 0xb0000000, mapped to 0xffffc90000800000, using 8128k, total 8128k</div><div>efifb: mode is 1920x1080x32, linelength=7680, pages=1</div><div>efifb: scrolling: redraw</div><div>efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0</div><div>Console: switching to colour frame buffer device 240x67</div><div>fb0: EFI VGA frame buffer device</div><div>input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:<wbr>00/PNP0C0C:00/input/input0</div><div>ACPI: Power Button [PWRB]</div><div>input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:<wbr>00/input/input1</div><div>ACPI: Power Button [PWRF]</div><div>Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled</div><div>Linux agpgart interface v0.103</div><div>[drm] Initialized drm 1.1.0 20060810</div><div>[drm] Memory usable by graphics device = 4096M</div><div>fb: switching to inteldrmfb from EFI VGA</div><div>Console: switching to colour dummy device 80x25</div><div>[drm] Replacing VGA console driver</div><div>[drm] RC6 disabled by BIOS</div><div>[drm] Supports vblank timestamp caching Rev 2 (21.10.2013).</div><div>[drm] Driver supports precise vblank timestamp query.</div><div>i915 0000:00:02.0: Direct firmware load for i915/bxt_dmc_ver1.bin failed with error -2</div><div>i915 0000:00:02.0: Failed to load DMC firmware [<a href="https://01.org/linuxgraphics/intel-linux-graphics-firmwares" target="_blank">https://01.org/linuxgraphics/<wbr>intel-linux-graphics-firmwares</a><wbr>], disabling runtime power management.</div><div>vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=<wbr>io+mem,decodes=io+mem:owns=io+<wbr>mem</div><div>[drm] failed to retrieve link info, disabling eDP</div><div>i915 0000:00:02.0: Direct firmware load for i915/bxt_guc_ver8.bin failed with error -2</div><div>[drm:intel_guc_ucode_init] *ERROR* Failed to fetch GuC firmware from i915/bxt_guc_ver8.bin (error -2)</div><div>tsc: Refined TSC clocksource calibration: 1593.615 MHz</div><div>clocksource tsc: mask: 0xffffffffffffffff max_cycles: 0x16f89566daa, max_idle_ns: 440795280110 ns</div><div>[drm] RC6 disabled, disabling runtime PM support</div><div>IOTG i915 forklift 2016-03-25</div><div>IOTG i915 build 2016y-05m-16d-15h-25m-52s -0700 (45c9a12)</div><div>[drm] Initialized i915 1.6.0 20160314 for 0000:00:02.0 on minor 0</div><div>brd: module loaded</div><div>loop: module loaded</div><div>sbi_apl starting, bus 0, device d.0</div><div>apl_gpio apl_gpio.1: Failed to attach ACPI GPIO chip</div><div>apl_gpio apl_gpio.2: Failed to attach ACPI GPIO chip</div><div>apl_gpio apl_gpio.3: Failed to attach ACPI GPIO chip</div><div>idma64 idma64.0: Found Intel integrated DMA 64-bit</div><div>idma64 idma64.1: Found Intel integrated DMA 64-bit</div><div>idma64 idma64.2: Found Intel integrated DMA 64-bit</div><div>idma64 idma64.3: Found Intel integrated DMA 64-bit</div><div>idma64 idma64.4: Found Intel integrated DMA 64-bit</div><div>idma64 idma64.5: Found Intel integrated DMA 64-bit</div><div>idma64 idma64.6: Found Intel integrated DMA 64-bit</div><div>idma64 idma64.7: Found Intel integrated DMA 64-bit</div><div>idma64 idma64.8: Found Intel integrated DMA 64-bit</div><div>dw-apb-uart.8: ttyS0 at MMIO 0xc1435000 (irq = 4, base_baud = 115200) is a 16550A</div><div>idma64 idma64.9: Found Intel integrated DMA 64-bit</div><div>dw-apb-uart.9: ttyS1 at MMIO 0xc1437000 (irq = 5, base_baud = 115200) is a 16550A</div><div>console [ttyS2] disabled</div><div>dw-apb-uart.10: ttyS2 at MMIO 0xc1439000 (irq = 6, base_baud = 114825) is a 16550A</div><div>Switched to clocksource tsc</div><div>[drm] RC6 off</div><div>[drm:host2guc_action] *ERROR* GuC: host2guc action 0x6 failed. ret=-110 status=0x00000006 response=0x00000000</div><div>console [ttyS2] enabled</div><div>fbcon: inteldrmfb (fb0) is primary device</div><div>dw-apb-uart.11: ttyS3 at MMIO 0xc143b000 (irq = 7, base_baud = 115200) is a 16550A</div><div>Console: switching to colour frame buffer device 240x67</div><div>idma64 idma64.12: Found Intel integrated DMA 64-bit</div><div>pxa2xx-spi pxa2xx-spi.12: cs2 >= max 2</div><div>pxa2xx-spi pxa2xx-spi.12: can't create new device for spidev</div><div>idma64 idma64.13: Found Intel integrated DMA 64-bit</div><div>pxa2xx-spi pxa2xx-spi.13: cs2 >= max 2</div><div>pxa2xx-spi pxa2xx-spi.13: can't create new device for spidev</div><div>idma64 idma64.14: Found Intel integrated DMA 64-bit</div><div>ahci 0000:00:12.0: AHCI 0001.0301 32 slots 1 ports 6 Gbps 0x1 impl SATA mode</div><div>ahci 0000:00:12.0: flags: 64bit ncq sntf pm clo only pmp pio slum part deso sadm sds apst </div><div>scsi host0: ahci</div><div>ata1: SATA max UDMA/133 abar m2048@0xc1449000 port 0xc1449100 irq 372</div><div>igb: Intel(R) Gigabit Ethernet Network Driver - version 5.2.15-k</div><div>igb: Copyright (c) 2007-2014 Intel Corporation.</div><div>pps pps0: new PPS source ptp0</div><div>igb 0000:02:00.0: added PHC on eth0</div><div>igb 0000:02:00.0: Intel(R) Gigabit Ethernet Network Connection</div><div>igb 0000:02:00.0: eth0: (PCIe:2.5Gb/s:Width x1) 98:4f:ee:13:bb:76</div><div>igb 0000:02:00.0: eth0: PBA No: FFFFFF-0FF</div><div>igb 0000:02:00.0: Using MSI-X interrupts. 4 rx queue(s), 4 tx queue(s)</div><div>Failed to set pin attr for GSI13</div><div>dwc3-pci 0000:00:15.1: PCI INT B: failed to register GSI</div><div>dwc3-pci: probe of 0000:00:15.1 failed with error -1</div><div>xhci_hcd 0000:00:15.0: xHCI Host Controller</div><div>xhci_hcd 0000:00:15.0: new USB bus registered, assigned bus number 1</div><div>xhci_hcd 0000:00:15.0: hcc params 0x200077c1 hci version 0x100 quirks 0x00009810</div><div>hub 1-0:1.0: USB hub found</div><div>hub 1-0:1.0: 8 ports detected</div><div>xhci_hcd 0000:00:15.0: xHCI Host Controller</div><div>xhci_hcd 0000:00:15.0: new USB bus registered, assigned bus number 2</div><div>hub 2-0:1.0: USB hub found</div><div>hub 2-0:1.0: 7 ports detected</div><div>usbcore: registered new interface driver usb-storage</div><div>i8042: PNP: No PS/2 controller found. Probing ports directly.</div><div>i915 0000:00:02.0: fb0: inteldrmfb frame buffer device</div><div>ata1: SATA link down (SStatus 4 SControl 300)</div><div>i8042: No controller found</div><div>mousedev: PS/2 mouse device common for all mice</div><div>rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0</div><div>rtc_cmos 00:02: alarms up to one month, 242 bytes nvram, hpet irqs</div><div>i2c /dev entries driver</div><div>i801_smbus 0000:00:1f.1: can't derive routing for PCI INT A</div><div>i801_smbus 0000:00:1f.1: PCI INT A: no GSI</div><div>genirq: Flags mismatch irq 0. 00000080 (i801_smbus) vs. 00015a00 (timer)</div><div>i801_smbus 0000:00:1f.1: Failed to allocate irq 0: -16</div><div>i801_smbus 0000:00:1f.1: SMBus using polling</div><div>md: linear personality registered for level -1</div><div>md: raid0 personality registered for level 0</div><div>md: raid1 personality registered for level 1</div><div>md: raid10 personality registered for level 10</div><div>md: multipath personality registered for level -4</div><div>md: faulty personality registered for level -5</div><div>device-mapper: ioctl: 4.31.0-ioctl (2015-3-12) initialised: <a href="mailto:dm-devel@redhat.com" target="_blank">dm-devel@redhat.com</a></div><div>EDAC pnd2: ECC disabled on channel 0</div><div>EDAC pnd2: Failed to register device with error -22.</div><div>Intel P-state driver initializing.</div><div>sdhci: Secure Digital Host Controller Interface driver</div><div>sdhci: Copyright(c) Pierre Ossman</div><div>sdhci-pci 0000:00:1b.0: SDHCI controller found [8086:5aca] (rev b)</div><div>sdhci-pci 0000:00:1b.0: failed to setup card detect gpio</div><div>sdhci-pci 0000:00:1b.0: No vmmc regulator found</div><div>sdhci-pci 0000:00:1b.0: No vqmmc regulator found</div><div>mmc0: SDHCI controller on PCI [0000:00:1b.0] using ADMA 64-bit</div><div>sdhci-pci 0000:00:1c.0: SDHCI controller found [8086:5acc] (rev b)</div><div>sdhci-pci 0000:00:1c.0: No vmmc regulator found</div><div>sdhci-pci 0000:00:1c.0: No vqmmc regulator found</div><div>usb 1-2: new low-speed USB device number 2 using xhci_hcd</div><div>mmc1: SDHCI controller on PCI [0000:00:1c.0] using ADMA 64-bit</div><div>sdhci-pci 0000:00:1e.0: SDHCI controller found [8086:5ad0] (rev b)</div><div>sdhci-pci 0000:00:1e.0: No vmmc regulator found</div><div>sdhci-pci 0000:00:1e.0: No vqmmc regulator found</div><div>mmc2: SDHCI controller on PCI [0000:00:1e.0] using ADMA 64-bit</div><div>usbcore: registered new interface driver usbhid</div><div>usbhid: USB HID core driver</div><div>mmc1: MAN_BKOPS_EN bit is not set</div><div>mmc1: new HS400 MMC card at address 0001</div><div>mmcblk0: mmc1:0001 CGND3R 58.2 GiB </div><div>mmcblk0boot0: mmc1:0001 CGND3R partition 1 4.00 MiB</div><div>mmcblk0boot1: mmc1:0001 CGND3R partition 2 4.00 MiB</div><div>mmcblk0rpmb: mmc1:0001 CGND3R partition 3 4.00 MiB</div><div>usb 1-2: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes</div><div>usb 1-2: ep 0x82 - rounding interval to 64 microframes, ep desc says 80 microframes</div><div>input: SIGMACHIP USB Keyboard as /devices/pci0000:00/0000:00:<wbr>15.0/usb1/1-2/1-2:1.0/0003:<wbr>1C4F:0016.0001/input/input2</div><div>hid-generic 0003:1C4F:0016.0001: input: USB HID v1.10 Keyboard [SIGMACHIP USB Keyboard] on usb-0000:00:15.0-2/input0</div><div>input: SIGMACHIP USB Keyboard as /devices/pci0000:00/0000:00:<wbr>15.0/usb1/1-2/1-2:1.1/0003:<wbr>1C4F:0016.0002/input/input3</div><div>hid-generic 0003:1C4F:0016.0002: input: USB HID v1.10 Device [SIGMACHIP USB Keyboard] on usb-0000:00:15.0-2/input1</div><div>oprofile: using NMI interrupt.</div><div>u32 classifier</div><div> Actions configured</div><div>NET: Registered protocol family 10</div><div>sit: IPv6 over IPv4 tunneling driver</div><div>NET: Registered protocol family 17</div><div>l2tp_core: L2TP core driver, V2.0</div><div>l2tp_netlink: L2TP netlink interface</div><div>Key type dns_resolver registered</div><div>Btrfs loaded</div><div>console [netcon0] enabled</div><div>netconsole: network logging started</div><div>rtc_cmos 00:02: setting system clock to 2017-02-25 20:39:16 UTC (1488055156)</div><div>snd_hda_codec_realtek hdaudioC0D0: ALC662 rev3: SKU not ready 0x00000100</div><div>snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC662 rev3: line_outs=3 (0x14/0x16/0x15/0x0/0x0) type:line</div><div>snd_hda_codec_realtek hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)</div><div>snd_hda_codec_realtek hdaudioC0D0: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)</div><div>snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0</div><div>snd_hda_codec_realtek hdaudioC0D0: dig-out=0x1e/0x0</div><div>snd_hda_codec_realtek hdaudioC0D0: inputs:</div><div>snd_hda_codec_realtek hdaudioC0D0: Rear Mic=0x18</div><div>snd_hda_codec_realtek hdaudioC0D0: Front Mic=0x19</div><div>snd_hda_codec_realtek hdaudioC0D0: Line=0x1a</div><div>snd_hda_codec_realtek hdaudioC0D0: CD=0x1c</div><div>snd_hda_codec_hdmi hdaudioC0D2: No i915 binding for Intel HDMI/DP codec</div><div>input: HDA Intel Rear Mic as /devices/pci0000:00/0000:00:<wbr>0e.0/sound/card0/input4</div><div>input: HDA Intel Front Mic as /devices/pci0000:00/0000:00:<wbr>0e.0/sound/card0/input5</div><div>input: HDA Intel Line as /devices/pci0000:00/0000:00:<wbr>0e.0/sound/card0/input6</div><div>input: HDA Intel Line Out Front as /devices/pci0000:00/0000:00:<wbr>0e.0/sound/card0/input7</div><div>input: HDA Intel Line Out Surround as /devices/pci0000:00/0000:00:<wbr>0e.0/sound/card0/input8</div><div>input: HDA Intel Line Out CLFE as /devices/pci0000:00/0000:00:<wbr>0e.0/sound/card0/input9</div><div>input: HDA Intel Front Headphone as /devices/pci0000:00/0000:00:<wbr>0e.0/sound/card0/input10</div><div>input: HDA Intel HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:<wbr>0e.0/sound/card0/input11</div><div>ish-hid {33AECD58-B679-4E54-9BD9-<wbr>A04D34F0C226}: [hid-ish]: enum_devices_done OK, num_hid_devices=4</div><div>ALSA device list:</div><div> #0: HDA Intel at 0xc1418000 irq 379</div><div>ttyS2 - failed to request DMA</div><div>Waiting 10 sec before mounting root device...</div><div>md: Waiting for all devices to be available before autodetect</div><div>md: If you don't use raid, use raid=noautodetect</div><div>md: Autodetecting RAID arrays.</div><div>md: Scanned 0 and added 0 devices.</div><div>md: autorun ...</div><div>md: ... autorun DONE.</div><div>VFS: Cannot open root device "sda1" or unknown-block(0,0): error -6</div><div>Please append a correct "root=" boot option; here are the available partitions:</div><div>0100 4096 ram0 (driver?)</div><div>0101 4096 ram1 (driver?)</div><div>0102 4096 ram2 (driver?)</div><div>0103 4096 ram3 (driver?)</div><div>0104 4096 ram4 (driver?)</div><div>0105 4096 ram5 (driver?)</div><div>0106 4096 ram6 (driver?)</div><div>0107 4096 ram7 (driver?)</div><div>0108 4096 ram8 (driver?)</div><div>0109 4096 ram9 (driver?)</div><div>010a 4096 ram10 (driver?)</div><div>010b 4096 ram11 (driver?)</div><div>010c 4096 ram12 (driver?)</div><div>010d 4096 ram13 (driver?)</div><div>010e 4096 ram14 (driver?)</div><div>010f 4096 ram15 (driver?)</div><div>b300 61071360 mmcblk0 driver: mmcblk</div><div>b318 4096 mmcblk0rpmb (driver?)</div><div>b310 4096 mmcblk0boot1 (driver?)</div><div>b308 4096 mmcblk0boot0 (driver?)</div><div>VFS: Unable to mount root fs on unknown-block(0,0)</div><div>User configuration error - no valid root filesystem found</div><div>Kernel panic - not syncing: Invalid configuration from end user prevents continuing</div><div>CPU: 1 PID: 1 Comm: swapper/0 Not tainted 4.1.21-WR8.0.0.11_standard #1</div><div>Hardware name: Intel Leafhill/Leafhill, BIOS APOLLOLAKE_CB_MR1_001 03/02/2017</div><div> 0000000000000000 ffff88017b12fd28 ffffffff81a4568e ffffffff81eb7630</div><div> 0000000000008001 ffff88017b12fda8 ffffffff81a438fa ffff88017b12fd48</div><div> ffffffff00000008 ffff88017b12fdb8 ffff88017b12fd58 62306b6c62636d6d</div><div>Call Trace:</div><div> [<ffffffff81a4568e>] dump_stack+0x4f/0x65</div><div> [<ffffffff81a438fa>] panic+0xbb/0x1d1</div><div> [<ffffffff8214b544>] mount_block_root+0x21e/0x235</div><div> [<ffffffff8214b76b>] mount_root+0xf1/0xfc</div><div> [<ffffffff811a69a6>] ? SyS_unlink+0x16/0x20</div><div> [<ffffffff8214b8e3>] prepare_namespace+0x16d/0x1a6</div><div> [<ffffffff8214b16f>] kernel_init_freeable+0x200/<wbr>0x215</div><div> [<ffffffff81a414e0>] ? rest_init+0x90/0x90</div><div> [<ffffffff81a414ee>] kernel_init+0xe/0xf0</div><div> [<ffffffff81a4dea2>] ret_from_fork+0x42/0x70</div><div> [<ffffffff81a414e0>] ? rest_init+0x90/0x90</div><div>Kernel Offset: disabled</div><div>---[ end Kernel panic - not syncing: Invalid configuration from end user prevents continuing</div></div><div><br></div></div>
</blockquote></div><br></div>