[flashrom] Biostar MCP61

[Carl-Daniel Hailfinger]

Hi Vitaliy,

thanks for your report.
Could you download latest flashrom from svn, apply the patch from
http://patchwork.coreboot.org/patch/1580/ (click on the "patch" link on
that page to download it), and then run
flashrom -V
and send the output to flashrom at flashrom.org ? Thanks.

Could you also please tell us the model name of your mainboard?

On 04.07.2010 07:22, Vitaliy Buchynskyy wrote:
> flashrom v0.9.2-r1001 on Linux 2.6.33.5-124.fc13.x86_64 (x86_64)
> [...]
> DMI string system-manufacturer: "BIOSTAR Group"
> DMI string system-product-name: "NF61D-A2"
> DMI string system-version: "1.0"
> Found ITE Super I/O, id 8716
> Found chipset "NVIDIA MCP61", enabling flash write... This chipset is not
> really supported yet. Guesswork...
> ISA/LPC bridge reg 0x8a contents: 0x00, bit 6 is 0, bit 5 is 0
> Guessed flash bus type is LPC
> Found SMBus device 10de:03eb at 00:01:1
> SPI BAR is at 0xfec80000, after clearing low bits BAR is at 0xfec80000
> Strange. MCP SPI BAR is valid, but chipset apparently doesn't have SPI
> enabled.
> This chipset supports the following protocols: LPC.
> No IT87* serial flash segment enabled.
> [...]
> Probing for AMIC A49LF040A, 512 KB: probe_jedec_common: id1 0x37, id2 0x9d
> Found chip "AMIC A49LF040A" (512 KB, LPC) at physical address 0xfff80000.
>   

Regards,
Carl-Daniel

-- 
http://www.hailfinger.org/