[flashrom] [PATCH] Add support for RayeR SPIPGM hardware.

[Michael Karcher]

Am Mittwoch, den 21.07.2010, 12:09 +0200 schrieb Carl-Daniel Hailfinger:
> New version. Rename to rayer_spi. Add a manpage entry.
> 
> Add support for RayeR SPIPGM hardware as described in
> http://rayer.ic.cz/elektro/spipgm.htm
> 
> To use the RayeR driver, run
> flashrom -p rayer_spi -V
> 
> Known bugs/limitations:
> - Won't compile/work on non-x86 architectures.
> - Will always use direct port I/O access.
> 
> Log follows:
> 
> flashrom v0.9.2-r1039 on MS-DOS 7 (i686), built with libpci 3.1.5, GCC 
> 4.3.2, little endian
> Calibrating delay loop... OK.
> Initializing rayer_bitbang_spi programmer
> Using port 0x378 as I/O base for parallel port access.
> ...
> Probing for Macronix MX25L1605, 2048 KB: probe_spi_rdid_generic: id1 
> 0xc2, id2 0x2015
> ...
> Found chip "Macronix MX25L1605" (2048 KB, SPI) at physical address 
> 0xffe00000.
> ...
> No operations were specified.
> 
> Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006 at gmx.net>
> Acked-by: Martin Rehak <rayer at seznam.cz>
Looks good.

Acked-by: Michael Karcher <flashrom at mkarcher.dialup.fu-berlin.de>

Regards,
  Michael Karcher