[flashrom] netbook hp 2133 mini :(

[Carl-Daniel Hailfinger]

Hi Paweł,

On 26.07.2010 23:49, Paweł Stawicki wrote:
> I tried flashrom on my netbook with this result
> No EEPROM/flash device found.
>
> :(
> netbook still works :)
>
> I'm attaching the result of:
> sudo ./flashrom -p internal:laptop=force_I_want_a_brick -V > flashrom.txt
>   

Thanks.


> flashrom v0.9.2-r1109 on Linux 2.6.32-21-generic (i686), built with libpci 3.0.0, GCC 4.4.3, little endian
> flashrom is free software, get the source code at http://www.flashrom.org
>
> Calibrating delay loop... OS timer resolution is 2 usecs, 374M loops per second, 10 myus = 11 us, 100 myus = 95 us, 1000 myus = 938 us, 10000 myus = 10079 us, 8 myus = 9 us, OK.
> Initializing internal programmer
> No coreboot table found.
> DMI string system-manufacturer: "Hewlett-Packard"
> DMI string system-product-name: "HP 2133"
> DMI string system-version: "F.06"
> DMI string baseboard-manufacturer: "Hewlett-Packard"
> DMI string baseboard-product-name: "3030"
> DMI string baseboard-version: "KBC Version 07.17"
> DMI string chassis-type: "Notebook"
> Laptop detected via DMI
> Found chipset "VIA VT8237S", enabling flash write... chipset PCI ID is 1106:3372, MMIO base at = 0xfed02000
> 0x6c: 0xffff     (CLOCK/DEBUG)
> Programming OPCODES... 
> program_opcodes: preop=5006 optype=463b opmenu=05d80302c79f0190
>   

The opmenu has opcodes 05 d8 03 02 c7 9f 01 90


> Setting BBAR is not implemented for VIA yet.
> done
> OK.
> This chipset supports the following protocols: LPC,FWH,SPI.
> Probing for Atmel AT25DF021, 256 KB: Opcode 9f not found.
> run OPCODE 0x9f failed
>   

And here flashrom complains about an opcode that should be present. Very
odd. We will need to investigate this.

Thanks for your report.

Regards,
Carl-Daniel

-- 
http://www.hailfinger.org/