[SerialICE] Serial output on Winbond W83627HG

[Joseph Smith]

On Tue, 29 Mar 2011 08:56:19 -0400, Corey Osgood <corey.osgood at gmail.com>
wrote:
> On Tue, Mar 29, 2011 at 8:08 AM, Joseph Smith <joe at settoplinux.org>
wrote:
>>
>>
>> On Tue, 29 Mar 2011 05:17:50 -0600, Myles Watson <mylesgw at gmail.com>
> wrote:
>>> On Tue, Mar 29, 2011 at 2:34 AM, Joseph Smith <joe at settoplinux.org>
>> wrote:
>>>>
>>>>
>>>> On Mon, 28 Mar 2011 22:51:23 -0600, Myles Watson <mylesgw at gmail.com>
>>> wrote:
>>>>>> Any other suggestions?
>>>>>
>>>>> Have you tried different host frequencies until you don't see
garbage?
>>>>>  If you know the default value, you could try it first.
>>>>>
>>>>
>>>> Sorry for the ignorance but what do you mean by host frequencies?
>>> Baudrate?
>>> Yes.  That's all I meant.
>>>
>> Hmm, the baudrate that works fine with vendor bios is 115200 and that is
>> what I have serialice set to, but I could play with other rates.
>>
>> Could the clock generator between the southbridge and superio be doing
>> something funny to scramble the signal?
> 
> Can you send a superiotool dump with the serial ports enabled and
> working? The registers say they're disabled in the one you sent.
> 
Wow your right. That is really weird. This board is a little different
anyways with one Winbond W83627HG SuperIO and 4 serial ports....

-- 
Thanks,
Joseph Smith
Set-Top-Linux
www.settoplinux.org