Difference between revisions of "ACPI"

From coreboot
Jump to: navigation, search
(CPU Power Management)
m (CPU Power Management)
Line 105: Line 105:
 
The actual content for family 0fh revF and later can be generated by complex algorithm implemented in the
 
The actual content for family 0fh revF and later can be generated by complex algorithm implemented in the
 
acpi files of DBM690T. Up to revE, all P state info must be hardcoded in tables.
 
acpi files of DBM690T. Up to revE, all P state info must be hardcoded in tables.
 +
 +
Proposed change: The generic post revE algorithm must be moved to the amd-acpi.c as well we can put this info to
 +
SSDT table instead, which can be generated runtime. The AML bytecode generator as well as a P state table generator
 +
were submitted to mailing list.
 +
 +
For now, you must include your Pstate info yourself using the generator and including that file in DSDT code.
  
 
=== Other tables ===
 
=== Other tables ===

Revision as of 19:59, 11 January 2009

ACPI setup HOWTO

Please have a look to files in the src/mainboard/asus/a8v-e_se. Check also the [ http://acpi.info ] which contains the specification.

Setup hardware

Setup the PMIO base address to some known address, and setup the desired ACPI IRQ (usually IRQ9). Sometimes it is called SCI interrupt.

Fill FADT

Now you will need to create an ACPI table which describes the I/O port location for kernel ACPI implementation. This is the FACP table. You will need to create the fadt.c file and fill in the IO port values plus IRQ:

fadt->sci_int = 9;
fadt->pm1a_evt_blk = VT8237R_ACPI_IO_BASE;
fadt->pm1b_evt_blk = 0x0;
fadt->pm1a_cnt_blk = VT8237R_ACPI_IO_BASE + 0x4;
fadt->pm1b_cnt_blk = 0x0;
fadt->pm2_cnt_blk = 0x0;
fadt->pm_tmr_blk = VT8237R_ACPI_IO_BASE + 0x8;
fadt->gpe0_blk = VT8237R_ACPI_IO_BASE + 0x20;
fadt->gpe1_blk = 0x0;

In this example the ACPI IRQ is 9, and the PM1A event block start at VT8237R_ACPI_IO_BASE. You may obtain some values from cat /proc/ioport if running with proprietary BIOS. Not all blocks are necessary usually only PM1A PMTMR and GPE0 are used. Please note that this table has the IO port information stored twice using different formats. Please consult the ACPI specification for details, mostly could be used what are the defaults in the fadt.c

Fill DSDT

The DSDT table contains a bytecode that is executed by driver in the kernel. This table stores also ACPI routing information in _PRT methods. You may add those _PRT methods later.

Generic part of DSDT

Very generic DSDT table would look like in similar way how it is ASUS A8V-E/ASUS M2V-MX SE (dsdt.asl).

        Scope (\_PR)
        {
                Processor (\_PR.CPU0, 0x00, 0x000000, 0x00) {}
                Processor (\_PR.CPU1, 0x01, 0x000000, 0x00) {}
        }

This is here for compatibility. More interesting is:


        /* For now only define 2 power states:
         *  - S0 which is fully on
         *  - S5 which is soft off
         * any others would involve declaring the wake up methods
         */
        Name (\_S0, Package () {0x00, 0x00, 0x00, 0x00 })
        Name (\_S5, Package () {0x02, 0x02, 0x00, 0x00 })

This defines the SLP_TYP fields in PM1A register. In my case I need to store 010 to perform soft off. And 000 to wakeup. Modify it to fit your chipset needs.

Interrupt routing in DSDT

The _PRT methods define the routing, similar to PIR and MP Table.

     Package (0x04) { 0x000BFFFF, 0x00, 0x00, 0x10 }, //slot 0xB
     Package (0x04) { 0x000BFFFF, 0x01, 0x00, 0x11 },
     Package (0x04) { 0x000BFFFF, 0x02, 0x00, 0x12 },
     Package (0x04) { 0x000BFFFF, 0x03, 0x00, 0x13 },

This defines the slot 0xB (all functions FFFF) routing as follows :

INTA -> IRQ16
INTB -> IRQ17
INTC -> IRQ18
INTD -> IRQ19

Note: you cannot indicate the special functions like:

Package (0x04) { 0x000F0001, 0x00, 0x00, 0x14 }, //0xf NAtive IDE IRQ 20

It means 0:0f.1 INTA is routed to IRQ20. Linux likes it. Windows not (code 12). ACPI standard requires that function is always 0xffff.

Please note that the 0x10, 0x11 are called GSI (global system interrupt). All your interrupts routed through first APIC will start with 0x00, second APIC will perhaps start at IRQ24 etc etc... This example has no support for legacy PIC routing. For PIC routing you would need to alter rest of the fields in the _PRT package and also crete PIRQA-PIRQD special devices.

Rest of the file contains just some legacy devices to make certain OS instatallers happy. Don't forget to install iasl compiler and also adjust the coreboot buildsystem to build binary DSDT for you.

CPU Power Management

The CPU power management is hardware specific. It is described in APCI specs and also in AMD BIOS and Kernel Developer guide. The rest of this section describes the AMD specific part. AMD needs ACPI objects which describes the similar info as the legacy PowerNow table. Check the BKDG for details.

The content of the tables must be generated runtime, which is a bit problem, because the DSDT table must be patched runtime during the POST. The only board which is doing is this is the AMD/Pistachio/DBM690T.

The actual content for family 0fh revF and later can be generated by complex algorithm implemented in the acpi files of DBM690T. Up to revE, all P state info must be hardcoded in tables.

Proposed change: The generic post revE algorithm must be moved to the amd-acpi.c as well we can put this info to SSDT table instead, which can be generated runtime. The AML bytecode generator as well as a P state table generator were submitted to mailing list.

For now, you must include your Pstate info yourself using the generator and including that file in DSDT code.

Other tables

Rest of the ACPI tables is located at acpi_tables.c. I will describe briefly all methods:

acpi_fill_mcfg

If your platform supports MMCONFIG (memory mapped PCI configuration registers) just modify the function with correct base address.

acpi_fill_madt

This describes the ACPI IRQ information, as well as IRQ override. The gsi_base used in the code is base for second APIC. Provide APIC bases and IDs. Usually there are two IRQ overrides. IRQ0 override means that IRQ0 is not connected to pin 0 on APIC but to another, most likely pin 2. Second IRQ override is for ACPI IRQ. This overrides the 'level' of the interrupt to 'active low'. The rest of the table is filled with NMI entries for the processor.

write_acpi_tables

This is the main function which constructs the tables. Functions described above are callbacks from the "construct" functions called here. You may ommit the HPET and MCFG tables.

FACS table

This table must be aligned to 64B boundary (Windows check this).

More to Read

Some good FAQ: http://www.acpi.info/acpi_faq.htm