Difference between revisions of "Board:gigabyte/m57sli"
Jump to navigation
Jump to search
m (→Status: Updates and fixes.) |
|||
Line 17: | Line 17: | ||
|CPU_status = OK | |CPU_status = OK | ||
| | |CPU_L1_status = Untested | ||
|CPU_L2_status = Untested | |||
|CPU_L3_status = N/A | |||
|CPU_multiple_status = N/A | |CPU_multiple_status = N/A | ||
|CPU_multicore_status = OK | |CPU_multicore_status = OK | ||
|CPU_virt_status = Untested | |||
|RAM_EDO_status = N/A | |RAM_EDO_status = N/A | ||
|RAM_SDRAM_status = N/A | |RAM_SDRAM_status = N/A | ||
|RAM_SODIMM_status = N/A | |RAM_SODIMM_status = N/A | ||
|RAM_DDR_status = N/A | |RAM_DDR_status = N/A | ||
|RAM_DDR2_status = OK | |RAM_DDR2_status = OK | ||
|RAM_DDR3_status = N/A | |RAM_DDR3_status = N/A | ||
|RAM_dualchannel_status = OK | |RAM_dualchannel_status = OK | ||
|RAM_dualchannel_comments = According to memtest86+ it works. | |RAM_dualchannel_comments = According to memtest86+ it works. | ||
|RAM_ecc_status = Untested | |||
|IDE_status = OK | |IDE_status = OK | ||
|IDE_25_status = N/A | |IDE_25_status = N/A | ||
|IDE_CF_status = OK | |IDE_CF_status = OK | ||
|IDE_CF_comments = Tested with an CF-IDE adapter without DMA support. Booting with LinuxBIOS is no problem. Booting with propritary BIOS didn't work. | |IDE_CF_comments = Tested with an CF-IDE adapter without DMA support. Booting with LinuxBIOS is no problem. Booting with propritary BIOS didn't work. | ||
|CDROM_DVD_status = OK | |CDROM_DVD_status = OK | ||
|SATA_status = OK | |SATA_status = OK | ||
|SATA_comments = A FILO patch is needed (see below) as LinuxBIOS is too fast and the disks have not spun up yet when LinuxBIOS is done. | |SATA_comments = A FILO patch is needed (see below) as LinuxBIOS is too fast and the disks have not spun up yet when LinuxBIOS is done. | ||
|USB_status = OK | |USB_status = OK | ||
|USB_comments = Tested: mounting USB storage devices and accessing files on them. USB MIDI-keyboard works, too (keyboard == the music instrument, in this case). | |USB_comments = Tested: mounting USB storage devices and accessing files on them. USB MIDI-keyboard works, too (keyboard == the music instrument, in this case). | ||
|Onboard_VGA_status = N/A | |Onboard_VGA_status = N/A | ||
|Onboard_ethernet_status = OK | |Onboard_ethernet_status = OK | ||
|Onboard_audio_status = OK | |Onboard_audio_status = OK | ||
|Onboard_audio_comments = Use '''modprobe snd-hda-intel''' (Alsa). | |Onboard_audio_comments = Use '''modprobe snd-hda-intel''' (Alsa). | ||
|Onboard_firewire_status = | |Onboard_modem_status = N/A | ||
|Onboard_firewire_status = Untested | |||
|Onboard_firewire_comments = PCI 01:0a.0 (FireWire) shows up in lspci as of r2921, but needs testing. | |Onboard_firewire_comments = PCI 01:0a.0 (FireWire) shows up in lspci as of r2921, but needs testing. | ||
|Smartcard_status = N/A | |||
|Onboard_CF_status = N/A | |Onboard_CF_status = N/A | ||
|Onboard_PCMCIA_status = N/A | |Onboard_PCMCIA_status = N/A | ||
|AMR_cards_status = N/A | |AMR_cards_status = N/A | ||
|ISA_cards_status = N/A | |||
|PCI_cards_status = WIP | |PCI_cards_status = WIP | ||
|PCI_cards_comments = | |PCI_cards_comments = As of r2921 PCI 01:07.0 appears fully functional; PCI 01:08.0 (closer to the board edge) shows up in lspci, but no interrupts yet. | ||
|AGP_cards_status = N/A | |||
| | |PCIE_x1_status = Unknown | ||
| | |PCIE_x2_status = N/A | ||
|PCIE_x4_status = N/A | |||
|PCIE_x8_status = N/A | |||
|PCIE_x16_status = OK | |||
|PCIE_x16_comments = Graphics card works (but not with the propritary nVidia driver right now). | |||
|PCIE_x32_status = N/A | |||
|HTX_status = N/A | |HTX_status = N/A | ||
|Floppy_status = No | |Floppy_status = No | ||
|Floppy_comments = Should work, but doesn't. | |Floppy_comments = Should work, but doesn't. | ||
|COM1_status = OK | |COM1_status = OK | ||
|COM1_comments = Serial console for LinuxBIOS and Linux is fully operational. | |COM1_comments = Serial console for LinuxBIOS and Linux is fully operational. | ||
|COM2_status = N/A | |COM2_status = N/A | ||
|PP_status = OK | |||
|PP_status = | |||
|PP_comments = Doing '''modprobe parport parport_pc''' works, but no further tests were done. | |PP_comments = Doing '''modprobe parport parport_pc''' works, but no further tests were done. | ||
|PS2_keyboard_status = OK | |PS2_keyboard_status = OK | ||
|PS2_keyboard_comments = Validated when booting with a PCIe VGA card under FILO and Linux; LinuxBIOS logs an error ("keyboard init failed") but this is not critical. | |PS2_keyboard_comments = Validated when booting with a PCIe VGA card under FILO and Linux; LinuxBIOS logs an error ("keyboard init failed") but this is not critical. | ||
|PS2_mouse_status = OK | |PS2_mouse_status = OK | ||
| | |Game_port_status = Untested | ||
|IR_status = Untested | |||
|Speaker_status = OK | |||
|Speaker_comments = Works with '''beep''' (use '''modprobe pcspkr'''). | |||
|DiskOnChip_status = N/A | |||
|Sensors_status = OK | |Sensors_status = OK | ||
|Sensors_comments = Sensors and fans work, see [http://linuxbios.org/pipermail/linuxbios/2007-April/020230.html instructions]. Some sensor readouts are off, and the pwm polarity seems to be inverted, but fan speed can be set. | |Sensors_comments = Sensors and fans work, see [http://linuxbios.org/pipermail/linuxbios/2007-April/020230.html instructions]. Some sensor readouts are off, and the pwm polarity seems to be inverted, but fan speed can be set. | ||
|Watchdog_status = Untested | |||
| | |CAN_bus_status = N/A | ||
| | |||
|CPUfreq_status = No | |CPUfreq_status = No | ||
|CPUfreq_comments = Won't work as long as there's no ACPI implementation for this board. | |CPUfreq_comments = Won't work as long as there's no ACPI implementation for this board. | ||
|Powersave_status = Untested | |||
|ACPI_status = No | |||
| | |||
| | |||
|Reboot_status = OK | |Reboot_status = OK | ||
|Poweroff_status = No | |Poweroff_status = No | ||
|LEDs_status = OK | |LEDs_status = OK | ||
|LEDs_comments = HD-LED works. Power-LED untested. | |LEDs_comments = HD-LED works. Power-LED untested. | ||
|HPET_status = Untested | |||
|RNG_status = Untested | |||
|WakeOnModem_status = Untested | |||
|WakeOnLAN_status = Untested | |||
|WakeOnKeyboard_status =Untested | |||
|WakeOnMouse_status = Untested | |||
|Flashrom_status = OK | |||
|Flashrom_comments = As of revision 2958, [[Flashrom]] now works under LinuxBIOS if you have a PLCC version of this board. Flashrom works fine under the proprietary BIOS. SPI flashing support is on its way, but not 100% there yet. | |||
}} | }} | ||