Difference between revisions of "Board:gigabyte/m57sli"

From coreboot
Jump to navigation Jump to search
Line 133: Line 133:
If you have an SOIC revision, you can add a second SOIC chip in the unpopulated position, and use a switch to toggle between both chips.  
If you have an SOIC revision, you can add a second SOIC chip in the unpopulated position, and use a switch to toggle between both chips.  


The most recent instructions by Peter Stuge can be found here [http://www.coreboot.org/pipermail/coreboot/2008-June/035915.html]. This is the recommended modification. Peter's company also sells pre-modified boards if you don't want to do the soldering, contact peter at stuge dot se for more information.
The most recent instructions by Peter Stuge can be found here [http://stuge.se/m57sli/]. This is the recommended modification. Peter's company also sells pre-modified boards if you don't want to do the soldering, contact peter at stuge dot se for more information.


Older instructions can be found here [http://coreboot.org/pipermail/coreboot/2007-September/024474.html here], and here are [http://stuge.se/lb/m57sli/ some photos]. These instructions have been [http://www.coreboot.org/pipermail/coreboot/2007-October/025906.html confirmed to work].
Older instructions can be found here [http://coreboot.org/pipermail/coreboot/2007-September/024474.html here], and here are [http://stuge.se/lb/m57sli/ some photos]. These instructions have been [http://www.coreboot.org/pipermail/coreboot/2007-October/025906.html confirmed to work].

Revision as of 19:49, 1 August 2008