Difference between revisions of "Board:gigabyte/m57sli"

From coreboot
Jump to navigation Jump to search
Line 17: Line 17:


|CPU_status = OK
|CPU_status = OK
|CPU_L1_status = Untested
|CPU_L1_status = OK
|CPU_L2_status = Untested
|CPU_L2_status = OK
|CPU_L3_status = N/A
|CPU_L3_status = N/A
|CPU_multiple_status = N/A
|CPU_multiple_status = N/A
Line 53: Line 53:
|Onboard_CF_status = N/A
|Onboard_CF_status = N/A
|Onboard_PCMCIA_status = N/A
|Onboard_PCMCIA_status = N/A
|Onboard_SCSI_status = N/A


|AMR_cards_status = N/A
|AMR_cards_status = N/A
|ISA_cards_status = N/A
|ISA_cards_status = N/A
|PCI_cards_status = WIP
|PCI_cards_status = WIP
|PCI_cards_comments = As of r2921 PCI 01:07.0 appears fully functional; PCI 01:08.0 (closer to the board edge) shows up in lspci, but no interrupts yet.
|PCI_cards_comments = As of r2921 PCI 01:07.0 appears fully functional; PCI 01:08.0 (closer to the board edge) shows up in lspci, but no interrupts yet. Should also be fixed with the patch on PCIE-x16.
|AGP_cards_status = N/A
|AGP_cards_status = N/A
|PCIE_x1_status = Unknown
|PCIE_x1_status = WIP
|PCIE_x1_comment = Right now it's untested, but it shouldn't be a problem to get it working fine. See PCIE-x16 comments/patch.
|PCIE_x2_status = N/A
|PCIE_x2_status = N/A
|PCIE_x4_status = N/A
|PCIE_x4_status = N/A
|PCIE_x8_status = N/A
|PCIE_x8_status = N/A
|PCIE_x16_status = OK
|PCIE_x16_status = WIP
|PCIE_x16_comments = Graphics card works (but not with the propritary nVidia driver right now). Works on rev v2. Patch: http://www.coreboot.org/pipermail/coreboot/2009-March/046084.html
|PCIE_x16_comments = Works on hardware rev v2, right now not tested on v1 and therefore not commited. Patch: http://www.coreboot.org/pipermail/coreboot/2009-March/046084.html
|PCIE_x32_status = N/A
|PCIE_x32_status = N/A
|HTX_status = N/A
|HTX_status = N/A


|Floppy_status = No
|Floppy_status = No
|Floppy_comments = Should work, but doesn't.
|Floppy_comments = Should work, but doesn't. Untested for a long time, maybe it will work with new revisions.
|COM1_status = OK
|COM1_status = OK
|COM1_comments = Serial console for coreboot and Linux is fully operational.
|COM1_comments = Serial console for coreboot and Linux is fully operational.
Line 78: Line 80:
|PS2_keyboard_comments = Validated when booting with a PCIe VGA card under FILO and Linux; coreboot logs an error ("keyboard init failed") but this is not critical.
|PS2_keyboard_comments = Validated when booting with a PCIe VGA card under FILO and Linux; coreboot logs an error ("keyboard init failed") but this is not critical.
|PS2_mouse_status = OK
|PS2_mouse_status = OK
|Game_port_status = Untested
|Game_port_status = N/A
|IR_status = Untested
|IR_status = N/A
|Speaker_status = OK
|Speaker_status = OK
|Speaker_comments = Works with '''beep''' (use '''modprobe pcspkr''').
|Speaker_comments = Works with '''beep''' (use '''modprobe pcspkr''').
Line 87: Line 89:
|Sensors_comments = Sensors and fans work, see [http://coreboot.org/pipermail/coreboot/2007-April/020307.html instructions]. Some sensor readouts are off, and the pwm polarity seems to be inverted, but fan speed can be set.
|Sensors_comments = Sensors and fans work, see [http://coreboot.org/pipermail/coreboot/2007-April/020307.html instructions]. Some sensor readouts are off, and the pwm polarity seems to be inverted, but fan speed can be set.
|Watchdog_status = Untested
|Watchdog_status = Untested
|Watchdog_comments = is there a hardware watchdog available?
|CAN_bus_status = N/A
|CAN_bus_status = N/A
|CPUfreq_status = No
|CPUfreq_status = WIP
|CPUfreq_comments = Won't work as long as there's no ACPI implementation for this board.
|CPUfreq_comments = see TODO.
|Powersave_status = Untested
|Powersave_status = Untested
|ACPI_status = No
|ACPI_status = WIP
|ACPI_comments = WIP: see TODO.
|Reboot_status = OK
|Reboot_status = OK
|Poweroff_status = No
|Poweroff_status = WIP
|Poweroff_comments = see TODO. (ACPI related.)
|LEDs_status = OK
|LEDs_status = OK
|LEDs_comments = HD-LED works. Power-LED untested.
|LEDs_comments = HD-LED works. Power-LED untested.
|HPET_status = Untested
|HPET_status = WIP
|HPET_comments = should work when ACPI support is finished.
|RNG_status = Untested
|RNG_status = Untested
|RNG_comments = is a RNG available? I don't believe.
|WakeOnModem_status = Untested
|WakeOnModem_status = Untested
|WakeOnLAN_status = Untested
|WakeOnLAN_status = Untested

Revision as of 10:31, 1 April 2009