Difference between revisions of "Board:lenovo/t420s"
From coreboot
(→Status) |
|||
Line 1: | Line 1: | ||
== Status == | == Status == | ||
+ | |||
+ | [[Intel_Native_Raminit]] has it's own status page. | ||
Issues: | Issues: | ||
Line 10: | Line 12: | ||
* some power management states missing? | * some power management states missing? | ||
* windows not supported | * windows not supported | ||
− | |||
== Proprietary Components Status == | == Proprietary Components Status == |
Revision as of 10:55, 23 November 2016
Status
Intel_Native_Raminit has it's own status page.
Issues:
- yellow USB port isn't powered in power-off state.
- Discrete GPU not supported - wip
- for i7 / Discrete GPU model - DisplayPort only connected to Discrete GPU -> does not work
- TPM - missing acpi
- Boot time issues after reboot (keyboard rest timeout)
- ultrabay hot plug (event missing?)
- some power management states missing?
- windows not supported
Proprietary Components Status
- CPU Microcode
- FDT(Flash Descriptor Table) => Always needed
- ME(Management Engine) => you do not have to touch it(just leave it where it is)
- GbE(Gigabit Ethernet embedded mac) => you do not have to touch it(just leave it where it is)
Code
- The code has been merged into coreboot master:
$ git clone https://review.coreboot.org/coreboot.git
Flashing
The flash chip can be a 8MB SOIC8 (Macronix MX25L6436EM2I / MX25L6406EM2I / Winbond W25Q64CVS) or WSON8 (Numonyx M25PX64).
Vendor firmware locks the flash and so you need to flash externally (unless until someone figures out a way around it). Lenovo firmware uses "protected regions" to protect the bootblock.