Board:lenovo/t420s

From coreboot
Revision as of 16:12, 8 January 2015 by Pl4nkton (talk | contribs) (Created page with "== Status == Issues: * yellow USB port isn't powered in power-off state. * Discrete GPU not supported * for i7 / Discrete GPU model - DisplayPort only connected to Discrete G...")
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search

The wiki is being retired!

Documentation is now handled by the same processes we use for code: Add something to the Documentation/ directory in the coreboot repo, and it will be rendered to https://doc.coreboot.org/. Contributions welcome!

Status

Issues:

  • yellow USB port isn't powered in power-off state.
  • Discrete GPU not supported
  • for i7 / Discrete GPU model - DisplayPort only connected to Discrete GPU -> does not work
  • TPM - missing acpi
  • Boot time issues after reboot (keyboard rest timeout)
  • no dmar (IOMMU)
  • ultrabay hot plug (event missing?)
  • some power management states missing
  • windows not supported


Proprietary Components Status

  • CPU Microcode
  • FDT(Flash Descriptor Table) => Always needed
  • ME(Management Engine) => you do not have to touch it(just leave it where it is)
  • GbE(Gigabit Ethernet embedded mac) => you do not have to touch it(just leave it where it is)

Code

  • The code has been merged into coreboot master:
 $ git clone https://review.coreboot.org/coreboot.git


Flashing

The flash chip can be a 8MB SOIC8 (Macronix MX25L6436EM2I / MX25L6406EM2I / Winbond W25Q64CVS) or WSON8 (Numonyx M25PX64).


Vendor firmware locks the flash and so you need to flash externally (unless until someone figures out a way around it). Lenovo firmware uses "protected regions" to protect the bootblock.