Board:lenovo/w520: Difference between revisions

From coreboot
Jump to navigation Jump to search
(ThinkWiki link for specifictaions)
(Include T520 image as it looks similar to W520)
Line 23: Line 23:


== Flashing ==
== Flashing ==
On first glance the W520 shows similarities to the T520:
[[File:J100.jpg|400px]]
* As the plastic casing it conductive make sure to trim the leads when attaching a J100 header.
* As the plastic casing it conductive make sure to trim the leads when attaching a J100 header.
* When flashing with a Raspberry Pi no external power is needed. The 3V source from pin 17 is sufficient. The pins WP and HOLD can be left floating. Make sure to insert all pins as once, as otherwise the W25Q64 might fail to respond.
* When flashing with a Raspberry Pi no external power is needed. The 3V source from pin 17 is sufficient. The pins WP and HOLD can be left floating. Make sure to insert all pins as once, as otherwise the W25Q64 might fail to respond.

Revision as of 19:08, 20 December 2017

Disclaimer: the current version of this page is entirely reconstructed from mailinglist posts from November 2016 by Charlotte Plusplus

Specification

The W520 comes in 4 quad-core configurations, and 1 dual-core configuration. The quad-core configurations support RAM up to 32GB.

Compared to the superseding W530 model it notably features the conventional keyboard, an eSATA port, and full-size DisplayPort connector.

For more detailed specifications, please refer to the ThinkWiki

Proprietary components status

  • CPU Microcode (optional)
  • VGA Option ROM (optional): the native graphics initialization tested gave video artifacts in SeaBIOS. When using VGA Bios there were none.
  • ME(Management Engine) => you do not have to touch it (just leave it where it is). Also the stripped down T420 version can be re-used.
  • EC(Embedded Controller) => you do not have to touch it (just leave it where it is)

Coreboot patch

An archive containing the W520 board support was posted on the Coreboot mailinglist. The patchset is based on the T530, but romstage additions for ram init were required.

Known issues

Flashing

On first glance the W520 shows similarities to the T520:

  • As the plastic casing it conductive make sure to trim the leads when attaching a J100 header.
  • When flashing with a Raspberry Pi no external power is needed. The 3V source from pin 17 is sufficient. The pins WP and HOLD can be left floating. Make sure to insert all pins as once, as otherwise the W25Q64 might fail to respond.


Creative Commons License
Creative Commons Attribution icon
This work is licensed under the Creative Commons Attribution 4.0 License.