Difference between revisions of "Board:msi/ms7135"

From coreboot
Jump to navigation Jump to search
(basic status info)
 
m (Phcoder moved page MSI MS-7135 to Board:msi/ms7135)
 
(7 intermediate revisions by 2 users not shown)
Line 1: Line 1:
Coreboot on the K8N Neo3 F (MS-7135).
Coreboot on the K8N Neo3 (MS-7135).
 
There are two versions of this board.
The K8N Neo3 H has a solder-on PLCC flash and brown AGR slot.
The K8N Neo3 F has a yellow AGR slot and a socketed flash.
 
In addition to the stock 512KiB LPC flash (such as Windbond W39V040A), 1MiB LPC flashes (SST 49VF080A) are usable.
 
== Voltage Control ==
''This section is presented for reference, coreboot currently ignores this chip, leaving the hardware-default memory voltage at 2.55v and the CK804 at 1.50v.''
 
The MS-6 chip appears at address 0x2f (or 0x5e if you consider the
R/W bit part of the address) on the secondary SMBus.
 
a register index, and then reading or writing a data byte.
 
{| class="wikitable"
|+ '''MS-6 registers as used on MS-7135'''
!index!!function
|-
|0x00||RAM voltage adjust
|-
|0x02||Southbridge core voltage adjust, via MS-6+ companion
|}
 
{| class="wikitable"
|+ '''Index 0x00'''
!value!!volts
|-
|0x00||2.55v
|-
|0x01||2.50v
|-
|0x02||2.60v
|-
|0x03||2.65v
|-
|0x04||2.70v
|}
 
{| class="wikitable"
|+ '''Index 0x02'''
!value!!volts
|-
|0x10||1.50v
|-
|0x11||1.55v
|-
|0x12||1.60v
|}
 
A keen observer will note these are in this order in the OEM BIOS setup program.


== The Mainboard ==
== The Mainboard ==
Line 5: Line 57:
{{Status|
{{Status|
|CPU_status = OK
|CPU_status = OK
|CPU_comments = cpu0: AMD Athlon(tm) 64 Processor 3200+, 2210.29 MHz
|CPU_L1_status = OK
|CPU_L1_status = OK
|CPU_L1_comments = cpu0: I-cache 64 KB 64B/line 2-way, D-cache 64 KB 64B/line 2-way
|CPU_L2_status = OK
|CPU_L2_status = OK
|CPU_L2_comments = cpu0: L2 cache 512 KB 64B/line 16-way
|CPU_L3_status = N/A
|CPU_L3_status = N/A
|CPU_multiple_status = N/A
|CPU_multiple_status = N/A
Line 19: Line 74:
|RAM_DDR3_status = N/A
|RAM_DDR3_status = N/A
|RAM_dualchannel_status = N/A
|RAM_dualchannel_status = N/A
|RAM_ecc_status = Untested
|RAM_ecc_status = No
|RAM_ecc_comments = Using ECC RAM causes machine to fail to get very far out of CAR.


|IDE_status = OK
|IDE_status = OK
|IDE_CF_status = OK
|IDE_CF_status = OK
|IDE_25_status = N/A
|IDE_25_status = N/A
|CDROM_DVD_status = Untested
|CDROM_DVD_status = OK
|SATA_status = OK
|SATA_status = OK
|Onboard_SCSI_status = N/A
|USB_status = OK
|USB_status = OK
|Onboard_VGA_status = N/A
|Onboard_VGA_status = N/A
Line 41: Line 98:
|AGP_cards_comments = AGR slot, it's really legacy PCI. Interrupts untested.
|AGP_cards_comments = AGR slot, it's really legacy PCI. Interrupts untested.
|PCI_cards_status = OK
|PCI_cards_status = OK
|Mini_PCI_cards_status = N/A
|PCIX_cards_status = N/A
|PCIE_x1_status = OK
|PCIE_x1_status = OK
|PCIE_x2_status = N/A
|PCIE_x2_status = N/A
Line 51: Line 110:
|Floppy_status = Untested
|Floppy_status = Untested
|COM1_status = OK
|COM1_status = OK
|COM2_status = Untested
|COM2_status = OK
|PP_status = Untested
|PP_status = Untested
|PP_comments = lpt0 at isa0 port 0x378-0x37b irq 7
|PS2_keyboard_status = OK
|PS2_keyboard_status = OK
|PS2_mouse_status = Untested
|PS2_mouse_status = OK
|Game_port_status = N/A
|Game_port_status = N/A
|IR_status = Untested
|IR_status = N/A
|Speaker_status = Untested
|Speaker_status = OK
|DiskOnChip_status = N/A
|DiskOnChip_status = N/A


|Sensors_status = Untested
|Sensors_status = OK
|Watchdog_status = Untested
|SMBus_status = OK
|SMBus_comments = interrupts untested
|CAN_bus_status = N/A
|CAN_bus_status = N/A
|CPUfreq_status = No
|CPUfreq_status = No
|CPUfreq_comments = Probably won't work as long as there's no ACPI implementation for this board.
|CPUfreq_comments = reboots when FID is changed
|Powersave_status = N/A
|Powersave_status = N/A
|ACPI_status = No
|ACPI_status = No
|ACPI_comments = There's no ACPI implementation for this board.
|ACPI_comments = There's no ACPI implementation for this board.
|Reboot_status = Untested
|Reboot_status = OK
|Poweroff_status = Untested
|Poweroff_status = No
|Poweroff_comments = may need ACPI to work
|LEDs_status = N/A
|LEDs_status = N/A
|HPET_status = Untested
|HPET_status = Unknown
|RNG_status = N/A
|RNG_status = N/A
|WakeOnModem_status = Untested
|WakeOnLAN_status = Untested
|WakeOnKeyboard_status = Untested
|WakeOnMouse_status = Untested
|Flashrom_status = OK
|Flashrom_status = OK
|Flashrom_comments = Currently [[Flashrom]] works fine with coreboot, but it may ''not'' yet work with the proprietary BIOS.
}}
}}


{{Cc-by-2.5}}
{{Cc-by-2.5}}

Latest revision as of 23:22, 18 January 2014