Board:nokia/ip530: Difference between revisions

From coreboot
Jump to navigation Jump to search
m (Phcoder moved page Nokia IP530 to Board:nokia/ip530)
 
(197 intermediate revisions by 3 users not shown)
Line 1: Line 1:
This page lists the coreboot status of the '''Nokia IP530''' mainboard. It's maintained by [[User:MBertens|Marc Bertens]].
This page lists the coreboot status of the '''Nokia IP530''' mainboard. It's maintained by [[User:MBertens|Marc Bertens]].


[[File:Nokia-Front-View.jpg|500px]]
[[File:Nokia-Front-View.jpg|550px||right|front view]]  


<!-- <br clear="all" /> -->
<!-- <br clear="all" /> -->


== Status ==
The Nokia IP530 is originally a Firewall that runs on the proprietary IPSO operating system of Nokia, it was based in the [[FreeBSD]] operating system. The original is only capable of starting a FreeBSD FS. There is as far as I known no CD support in the orginal BIOS.
 
The System has no VGA, all console activity must be done through a serial console.
 
At the front the following can be found;[[File:31052010399.jpg|550px||right|board view]]
 
* Power LED
* Alert LED
* Fault LED
* Primary IDE activity LED
* Secondary IDE activity LED
* Two drive bays (primary IDE and secondary IDE)
* 2 Serial interfaces COM1 and COM2
* 4 Ethernet RJ45 sockets
* 2 PCMCIA slots
* Reset button
* 3 Compact PCI slots (industial PCI)
 
At the back the following can be found;
* Power supply
** EURO Power connector
** Power switch
** LED 'PWR OK'
** LED 'FAULT'
** LED 'OVR TEMP'
** two FANs for power supply cooling
* Dual FAN unit
** two FANs for mainboard cooling
 
 
== Development status ==
 
The current development status is; Coreboot (Revision 6292) runs with seaBIOS (commit 89a1efd95c4f3ee349fa36c31526ae880820ce19). Linux 2.6.32 runs on the system, and most devices are supported. But there are still things to findout. Currently one IP530 runs as a server with Ubuntu 10.10.
 
The current coreboot works for board revision A of Nokia. Currently underway is the new release with autodetect support for board revision B and higher. Currently known the Nokia revisions go up to F. And revision F in known to work with coreboot implementation of revision B.
 
== Hardware status ==


{{Status|
{{Status|


|CPU_status = OK
|CPU_status = OK
|CPU_comments = PIII SL5DV (1000 / 256 / 133 / 1.75V)
|CPU_L1_status = OK
|CPU_L1_status = OK
|CPU_L1_comments = CPU: L1 I cache: 16K, L1 D cache: 16K
|CPU_L1_comments = CPU: L1 I cache: 16K, L1 D cache: 16K
|CPU_L2_status = WIP
|CPU_L2_status = OK
|CPU_L2_comments = L2 cache is not being enabled at the moment. We're working on fixing it.
|CPU_L2_comments = L2 cache is standard for the P3-68X models
|CPU_L3_status = N/A
|CPU_L3_status = N/A
|CPU_multiple_status = N/A
|CPU_multiple_status = N/A
Line 21: Line 58:
|RAM_EDO_status = N/A
|RAM_EDO_status = N/A
|RAM_SDRAM_status = OK
|RAM_SDRAM_status = OK
|RAM_SDRAM_comments = upto 4 single sided 128Mb or 4 dual sided 256Mb
|RAM_SODIMM_status = N/A
|RAM_SODIMM_status = N/A
|RAM_DDR_status = N/A
|RAM_DDR_status = N/A
Line 30: Line 68:


|IDE_status = OK
|IDE_status = OK
|IDE_comments = Primary and secondary controllers, the primary controller has a Compact Flash slot attached on board, as primary drive.
|IDE_25_status = N/A
|IDE_25_status = N/A
|SATA_status = N/A
|SATA_status = N/A
|USB_status = N/A
|USB_status = OK
|USB_comments =  
|USB_comments = The USB is not routed to any connector, u can be picked up from the board it self, there is an instruction below on this wiki-page how to do this
|Onboard_VGA_status = N/A
|Onboard_VGA_status = N/A
|Onboard_ethernet_status = OK
|Onboard_ethernet_status = OK
|Onboard_ethernet_comments = Four intel 21143PD controllers.
|Onboard_audio_status = N/A
|Onboard_audio_status = N/A
|Onboard_modem_status = N/A
|Onboard_modem_status = N/A
Line 41: Line 81:
|Smartcard_status = N/A
|Smartcard_status = N/A
|Onboard_CF_status = OK
|Onboard_CF_status = OK
|Onboard_CF_comments = Is wrired are primary drive on primary IDE controller.
|Onboard_PCMCIA_status = OK
|Onboard_PCMCIA_status = OK
|Onboard_PCMCIA_comments = Texas Instruments PCI1225 PCMCIA/Cardbus controller
|Onboard_SCSI_status = N/A
|Onboard_SCSI_status = N/A


Line 49: Line 91:
|PCIX_cards_status = N/A
|PCIX_cards_status = N/A
|PCI_cards_status = OK
|PCI_cards_status = OK
|PCI_cards_comments = Tested: With 4 Ethernet adapter card of Nokia
|PCI_cards_comments = Tested: With 4 Ethernet adapter card of Nokia (Compact-PCI slots)
|AGP_cards_status = N/A
|AGP_cards_status = N/A
|PCIE_cards_status = N/A
|PCIE_cards_status = N/A
Line 64: Line 106:
|COM2_status = OK
|COM2_status = OK
|PP_status = N/A
|PP_status = N/A
|PS2_keyboard_status = N/A
|PS2_keyboard_status = OK
|PS2_keyboard_comments = Internal 4 pin connector J-KBD
|PS2_mouse_status = N/A
|PS2_mouse_status = N/A
|Game_port_status = N/A
|Game_port_status = N/A
Line 71: Line 114:
|DiskOnChip_status = N/A
|DiskOnChip_status = N/A


|Sensors_status = No
|Sensors_status = WIP
|Watchdog_status = N/A
|Watchdog_status = N/A
|CAN_bus_status = N/A
|CAN_bus_status = N/A
Line 78: Line 121:
|ACPI_status = No
|ACPI_status = No
|ACPI_comments = There's no ACPI implementation for this board, but it's on our TODO list.
|ACPI_comments = There's no ACPI implementation for this board, but it's on our TODO list.
|SMBus_status = N/A
|SMBus_status = WIP
|Reboot_status = N/A
|Reboot_status = N/A
|Poweroff_status = N/A
|Poweroff_status = N/A
|LEDs_status = No
|LEDs_status = OK
|LEDs_comments = Special-purpose LEDs available on the board, but it's on our TODO list.
|LEDs_comments = Special-purpose LEDs available on the board, '''Alert''' and '''Fault''' are controlled by the superio
|HPET_status = N/A
|HPET_status = N/A
|RNG_status = N/A
|RNG_status = N/A
Line 90: Line 133:
|WakeOnMouse_status = N/A
|WakeOnMouse_status = N/A
|Flashrom_status = OK
|Flashrom_status = OK
 
|Flashrom_comments = Supported flashrom revision 1010 or higher.
}}
}}


== System Setup ==
== System Setup ==


{|
On board of the IP530 can be found the following:
* Pentium III.
* I440BX northbridge.
* 82371 southbridge.
* intel 21150 PCI to PCI bridge.
* 28F400, 512 Kbyte flashrom.
* SMSC FDC37B787 superio with 1024 bits SPI eeprom attached.
* LM78 power controller.
* 4 intel 21143PD ethernet controllers with KS8716 PHY interface, with each a 1024 bits SPI eeprom attached.
* Texas instruments PCI1225 PCMCIA/Cardbus controller with TPS22061 slot controller.
* 4 SD-RAM sockets.
 
Below the description is given for the following;
* For the connectors on the mainboard of the Nokia IP530, due missing documentation of the manufacturer.
* To create a flash option board on the J-DEBUG connector.
* To create a USB port.
* HOWTO read the status of the jumpers.
* HOWTO enable/disable the LEDs.
* The layout of the SPI eeprom behind the SuperIO.
 
----
==== J-DEBUG ====
 
The JDEBUG connector can be used for attaching an external ROM (flash chip) to the board for BIOS development.
 
{|border="1"
|+ JDEBUG connector
|+ JDEBUG connector
! PIN NO !! NAME !! Description
! Pin# !! Name !! Description || Pin# || Name || Description
|------------------------------
| 1|| unknown||?||2||VCC +5 Volt||n/a
|------------------------------
| 3|| A16 ||Address line A16 || 4||A18||Address line A18
|------------------------------
|------------------------------
|1
| 5|| A15 ||Address line A15 || 6||A17||Address line A17
|unknown
|?
|------------------------------
|------------------------------
|2
| 7|| A12 ||Address line A12 || 8||A14||Address line A14
|VCC +5 Volt
|------------------------------
|n/a
| 9||  A7 ||Address line A7  || 10||A13||Address line A13
|------------------------------
|11||  A6 ||Address line A6  || 12|| A8||Address line A8
|------------------------------
|13||  A5 ||Address line A5  || 14|| A9||Address line A9
|------------------------------
|15||  A4 ||Address line A4  || 16|| A11 ||Address line A11
|------------------------------
|17||  A3 ||Address line A3  || 18|| OE# ||Chip Enable Line OE#
|------------------------------
|19||  A2 ||Address line A2  || 20|| A10 ||Address line A10
|------------------------------
|21||  A1 ||Address line A1  || 22|| JP800.1 || BIOSCS#
|------------------------------
|23||  A0 ||Address line A0  || 24|| D7  ||Data line D7
|------------------------------
|25||  D0 ||Data line A0    || 26|| D6  ||Data line D6
|------------------------------
|27||  D1 ||Data line D1    || 28|| D5  ||Data line D5
|------------------------------
|29||  D2 ||Data line D2    || 30|| D4  ||Data line D4
|------------------------------
|31|| IOW#||Control line IOW#|| 32|| D3  ||Data line D3
|------------------------------
|33|| GND ||Ground          || 34|| IOR#||Control line IOR#
|}
 
For recovery there can be placed an flashrom board on the J-DEBUG connector. Belowe here the schematic in PDF can be used. 
 
[[media:Rom-option-board-schema.pdf|Schematic ROM option board]]


As wel the PCB layout in PDF, for this print it on a transparant paper in the highest quality (so it will be very black). From this a PCB can be made.
[[media:Rom-option-board.pdf|Printed Circuit Board (PCB) layout]]
The 34 pin connector shoud be female 90 degres, so that the board is upright when attached to the IP530. you can select a 32 DIL socket, 32 PLCC socket, but not both flashroms inserted only one at the time.
The overview can be used to place the components and solder them in. The red lines in the overview are wires that need to be soldered in.
[[media:Rom-option-board-overview.pdf|Components overview PCB]]
When ready flash the rom in a programmer and inserted it into a socket. Attach the board to the main board of the IP530 (notice the PIN 1 of both boards, when you put it wrong the flashrom on the option board will be blown-up. 
----
==== Jumper JP800 - BIOSCS select ====
This jumper selected the on-board flash or the J-DEBUG connector where the BIOSCS# line is routed.
{|border="1"
|+ J800 Jumper
! Pin# !! Name !! Description
|-
|1||JDEBUG.P22||This is connected to PIN 22 of the JDEBUG connection on the board
|-
|2||BIOSCS#||Connected to the ROMCS# line of the Northbridge
|-
|3||CS#||This is connected to CS# of the on-board flash chip.
|}
The WP# line of the on-board flashchip is controlled by Pin39 of the SMSC FDC37B787 Super I/O chip.
On the production boards the J800 is not present and the R814 (0 Ohm) is placed, remove this resistor and solder in the 3 pin-jumper for JP800. And place the jumper on position 2-3 to select the on-board flash chip.
----
==== Jumper JP900 ====
This is a input signal on the Super I/O chip.
{|border="1"
|+ J900 Jumper
! Pin# !! Name !! Description
|-
|1||GND||Ground of the system
|-
|2||GPIO16||Pin 4 of the SMSC FDC37B787 Super I/O chip.
|}
Pin 2 is pulled-up by resistor up VCC.
  #define REG_GP1x 0xF6
  #define JP900         0x20
 
  sio_enter_config( 0x3F0 );
  val = (sio_read( 0x3F0, REG_GP6x ) & JP901); 
  sio_leave_config( 0x3F0 );
----
==== Jumper JP901 ====
This is a input signal on the Super I/O chip.
{|border="1"
|+ J901 Jumper
! Pin# !! Name !! Description
|-
|1||GND||Ground of the system
|-
|2||GPIO67||Pin 90 of the SMSC FDC37B787 Super I/O chip.
|}
|}


Pin 2 is pulled-up by resistor up VCC.


{|
  #define REG_GP6x 0xYY
|+ J800 Jumper
  #define JP901         0x80
! PIN NO !! NAME !! Description
 
  sio_enter_config( 0x3F0 );
  val = (sio_read( 0x3F0, REG_GP6x ) & JP901); 
  sio_leave_config( 0x3F0 );
 
 
----
 
==== Jumper JKBD ====
 
{|border="1"
|+ JKBD Connector
! Pin# !! Name !! Description
|-
|1||VCC||VCC +5 volt
|-
|2||DATA||The DAT line of the PS2 keyboard (pin 70 SMSC FDC37B787)
|-
|3||CLOCK||The CLK line of the PS2 keyboard (pin 71 SMSC FDC37B787)
|-
|4||GND||Ground of the system
|}
 
----
 
==== Front LEDs ====
{|border="1"
|+ LEDs in front
! LED !! Control line !! Description
|-
|Fault||FDC37B787-GP13||active low
|-
|Alert||FDC37B787-GP17||active low
|}
 
  #define REG_GP1x 0xF6
  #define LED_FAULT 0x08
  #define LED_ALERT 0x80
 
  sio_enter_config( 0x3F0 );
  val = sio_read( 0x3F0, REG_GP1x );
 
  // To enable the ALERT led
  val &= ~LED_ALERT;
 
  // To disable the ALERT led
  val |= LED_ALERT;
 
  // To enable the FAULT led
  val &= ~LED_FAULT;
 
  // To disable the FAULT led
  val |= LED_FAULT;
 
  sio_write( 0x3F0, REG_GP1x, val );
  sio_leave_config( 0x3F0 );
 
By using the sio_xxx() functions from flashrom, makes easy work dis-/en-abling the LEDs in the front.
 
----
==== EEPROM behide the SuperIO ====
{|border="1"
|+ EEPROM information
! address range !! length !! Content !! Description
|-
|0x00-0x05||6 bytes||IP530\x00||Product name
|-
|0x06-0x13||14 bytes||0x55||Filler
|-
|0x14-0x17||4 bytes||0x05,0x00,0x00,0x00||Unknown
|-
|0x18-0x1B||4 bytes||0x04,0x00,0x00,0x00||Unknown
|-
|0x1C-0x1F||4 bytes||0x03,0x00,0x00,0x00||Unknown
|-
|0x20-0x23||4 bytes||0x10,0x00,0x00,0x00||Unknown
|-
|0x24-0x29||6 bytes||-||Board number, sticker close to the PIII cpu
|-
|0x2A-0x37||14 bytes||-||Mfg. P/n (on the bottom side of the unit), filled out with spaces
|-
|0x38-0x3D||6 bytes||0x55||Filler
|-
|0x3E-0x3F||2 bytes||0xYY,0x00||Mfg. rev. (on the bottom side of the unit), 0xYY = is the revision letter, where A = 0x41, B = 0x42
|-
|0x40-0x51||18 bytes||0x55||Filler
|-
|-
|1
|0x52-0x5D||12 bytes||-||Serial number (on the bottom side of the unit)
|BIOSCS#
|Connected to the ROMCS# line of the Northbridge
|-
|-
|2
|0x5E-0x7D||32 bytes||0x55||Filler
|JDEBUG.P22
|This is connected to PIN 22 of the JDEBUG connection on the board
|-
|-
|3
|0x7E-0x7F||2 bytes||0xFF,0xFF||Unknown, probably the checksum value, but not used therefore filled 0xFFFF
|CS#
|This is connected to CS# of the on-board flash chip.
|}
|}
On coreboot startup the eeprom is read, to determine if its a IP530, otherwise it get signaled. And the revision of the hardware. When its reads an unknown (at that time) herdware revision, revision B will be assumed.
<font color="red"><br>
Be aware when accessing the data the addresses above are byte address, they need to be converted in word addresses.
<br></font>
----
=== USB Connections ===
This requires two wires to be soldered on the backside of the mainboard, pictures will be added later
[[File:Nokia-mainboard-backside-sb62371-usb.png|300px|||Ckick on the image to see a larger view]]
Put the mainboard upside down, and the power connector facing you. Find the footprint of the 82371 southbridge.
Locate the two pads; i directly above (about 1.5 mm) the F1 pin of the SB, and 1 to left (about 15mm) of the A5 pin of the SB.
Solder two wires to the two pads, be aware that the USB lines are polarity sensitive !!!
                  _____
  USBPxP >---+---|_____|---+---------> USBPx+ to connector pin 3
            |    27R    |
            |            ---      * VCC 5 volt
          ----- 27pF    | | 15K  |
          -----          | |      |
            |            | |      +-> to connector pin 1
            |            ---
            |            |
  * GND  >---+-------------+---------> to connector pin 4
            |    27R    |
            |            ---
          ----- 27pF    | | 15K
          -----          | |
            |            | |
            |            ---
            |    _____    |
  USBPxN >---+---|_____|---+---------> USBPx- to connector pin 2
                  27R
  * pickup from somewhere on the board the power lines VCC 5 volt and GND (for instance on the JKBD connector pin 1 for VCC and pin 4 for GND)
With this you have succesful added the USB port on the Nokia-IP530. Below are the schematic and board layout in .PDF format for the USB interface.
[[media:Usb-option-board-host-socket-a-sch.pdf|Schematic USB interface board]]
[[media:Usb-option-board-host-socket-a-pcb.pdf|Printed Circuit Board (PCB) layout]]
[[media:Usb-option-board-host-socket-a-sil.pdf|Components overview PCB]]
----
== Installing/booting the Nokia-IP530 ==
The IP530 came with 8, 16 and 32Mb CF cards. There is available for download a 32Mb image that will start with the vendor bios.
This image which can be placed on the standard CF card of the IP530.
  #[sudo] dd of=/dev/<cf-card-device> if=./linux-nokia-ip530-coreboot.img
[[media:Linux-nokia-ip530-coreboot.tar.gz|Download 32Mb CF card image (7.9Mb)]]
This is not a distrubution, but a lean and mean installation with a stable kernel. This image is intended to be used for upgrading, testing and developing coreboot on a x86 system.
Place the CF card in the slot of the IP530, connect a serial cross cable. get a terminal program (like putty) set
the speed to 115200 Bps None, 8, 1 and boot up the IP530.
You must get a prompt.
When installing Linux on/for a Nokia-IP530, there are two ways; 1 use a donor PC or installation of a distro that uses the serial console for its installation. The kernel boot customation, must be something like this "apci=off console=ttyS0,115200n8" apci=off is nessary due that the Nokia-IP530 coreboot bios does'nt support APCI yet. Make sure that the ttyS0 is enabled in inittab, or some other place depending on the distro.
----
== Other OSes ==
It should be posible to run any OS that is able to run without the following devices:
* Videocard
* Keyboard
* Mouse
* Floppy
* Paralell port
OSes tested: Linux 2.6.32 and freeBSD 8.1 (unknown if all devices work as they work under Linux)
But NO windows :-)
----
== TODO ==
* Correctly setup the LM87 power management controller.
** Right FAN-RPM at the backplane goes to PIN 6 of the LM87
** Left FAN-RPM at the backplane goes to PIN 5 of the LM87
* Support for board revisions other than A and B .
----
== Flashing ==
Depending on the board revision, the board revision can be found on the bottom side of the IP530 or the inside of the machine, its on little stickers on the right-side of the board.
There are currently to revisions (A/B) available doe the IP530.
  coreboot-nokia-ip530-board-rev-a.rom
 
  coreboot-nokia-ip530-board-rev-b.rom
Both rom images are on the [[media:Linux-nokia-ip530-coreboot.tar.gz|Download 32Mb CF card image (7.9Mb)]]
For flashing the images read the documentation of flashrom. You need atleast Revision 1010 of flashrom.
----
== Feedback ==
Havefun with your Nokia-IP530, any remarks about this please email me on pe2mbs@yahoo.co.uk
You can mail me too if you have a board revision that is not supported yet, you must be able to load the rom image
"coreboot-nokia-ip530-board-rev-b.rom", but be prepared that maybe not all hardware is working.
----




{{GPL}}
{{GPL}}

Latest revision as of 23:22, 18 January 2014

This page lists the coreboot status of the Nokia IP530 mainboard. It's maintained by Marc Bertens.

front view
front view


The Nokia IP530 is originally a Firewall that runs on the proprietary IPSO operating system of Nokia, it was based in the FreeBSD operating system. The original is only capable of starting a FreeBSD FS. There is as far as I known no CD support in the orginal BIOS.

The System has no VGA, all console activity must be done through a serial console.

At the front the following can be found;

board view
board view
  • Power LED
  • Alert LED
  • Fault LED
  • Primary IDE activity LED
  • Secondary IDE activity LED
  • Two drive bays (primary IDE and secondary IDE)
  • 2 Serial interfaces COM1 and COM2
  • 4 Ethernet RJ45 sockets
  • 2 PCMCIA slots
  • Reset button
  • 3 Compact PCI slots (industial PCI)

At the back the following can be found;

  • Power supply
    • EURO Power connector
    • Power switch
    • LED 'PWR OK'
    • LED 'FAULT'
    • LED 'OVR TEMP'
    • two FANs for power supply cooling
  • Dual FAN unit
    • two FANs for mainboard cooling


Development status

The current development status is; Coreboot (Revision 6292) runs with seaBIOS (commit 89a1efd95c4f3ee349fa36c31526ae880820ce19). Linux 2.6.32 runs on the system, and most devices are supported. But there are still things to findout. Currently one IP530 runs as a server with Ubuntu 10.10.

The current coreboot works for board revision A of Nokia. Currently underway is the new release with autodetect support for board revision B and higher. Currently known the Nokia revisions go up to F. And revision F in known to work with coreboot implementation of revision B.

Hardware status

Device/functionality Status Comments
CPU
CPU works OK=lime | TODO=red | No=red | WIP=orange | Untested=yellow | N/A=lightgray | yellow }}" | OK PIII SL5DV (1000 / 256 / 133 / 1.75V)
L1 cache enabled OK=lime | TODO=red | No=red | WIP=orange | Untested=yellow | N/A=lightgray | yellow }}" | OK CPU: L1 I cache: 16K, L1 D cache: 16K
L2 cache enabled OK=lime | TODO=red | No=red | WIP=orange | Untested=yellow | N/A=lightgray | yellow }}" | OK L2 cache is standard for the P3-68X models
L3 cache enabled OK=lime | TODO=red | No=red | WIP=orange | Untested=yellow | N/A=lightgray | yellow }}" | N/A
Multiple CPU support OK=lime | TODO=red | No=red | WIP=orange | Untested=yellow | N/A=lightgray | yellow }}" | N/A
Multi-core support OK=lime | TODO=red | No=red | WIP=orange | Untested=yellow | N/A=lightgray | yellow }}" | N/A
Hardware virtualization OK=lime | TODO=red | No=red | WIP=orange | Untested=yellow | N/A=lightgray | yellow }}" | N/A
RAM
EDO OK=lime | TODO=red | No=red | WIP=orange | Untested=yellow | N/A=lightgray | yellow }}" | N/A
SDRAM OK=lime | TODO=red | No=red | WIP=orange | Untested=yellow | N/A=lightgray | yellow }}" | OK upto 4 single sided 128Mb or 4 dual sided 256Mb
SO-DIMM OK=lime | TODO=red | No=red | WIP=orange | Untested=yellow | N/A=lightgray | yellow }}" | N/A
DDR OK=lime | TODO=red | No=red | WIP=orange | Untested=yellow | N/A=lightgray | yellow }}" | N/A
DDR2 OK=lime | TODO=red | No=red | WIP=orange | Untested=yellow | N/A=lightgray | yellow }}" | N/A
DDR3 OK=lime | TODO=red | No=red | WIP=orange | Untested=yellow | N/A=lightgray | yellow }}" | N/A
Dual channel support OK=lime | TODO=red | No=red | WIP=orange | Untested=yellow | N/A=lightgray | yellow }}" | N/A
ECC support OK=lime | TODO=red | No=red | WIP=orange | Untested=yellow | N/A=lightgray | yellow }}" | WIP Not yet supported by the coreboot 440BX code, but it's on our TODO list.
On-board Hardware
On-board IDE 3.5" OK=lime | TODO=red | No=red | WIP=orange | Untested=yellow | N/A=lightgray | yellow }}" | OK Primary and secondary controllers, the primary controller has a Compact Flash slot attached on board, as primary drive.
On-board IDE 2.5" OK=lime | TODO=red | No=red | WIP=orange | Untested=yellow | N/A=lightgray | yellow }}" | N/A
On-board SATA OK=lime | TODO=red | No=red | WIP=orange | Untested=yellow | N/A=lightgray | yellow }}" | N/A
On-board SCSI OK=lime | TODO=red | No=red | WIP=orange | Untested=yellow | N/A=lightgray | yellow }}" | N/A
On-board USB OK=lime | TODO=red | No=red | WIP=orange | Untested=yellow | N/A=lightgray | yellow }}" | OK The USB is not routed to any connector, u can be picked up from the board it self, there is an instruction below on this wiki-page how to do this
On-board VGA OK=lime | TODO=red | No=red | WIP=orange | Untested=yellow | N/A=lightgray | yellow }}" | N/A
On-board Ethernet OK=lime | TODO=red | No=red | WIP=orange | Untested=yellow | N/A=lightgray | yellow }}" | OK Four intel 21143PD controllers.
On-board Audio OK=lime | TODO=red | No=red | WIP=orange | Untested=yellow | N/A=lightgray | yellow }}" | N/A
On-board Modem OK=lime | TODO=red | No=red | WIP=orange | Untested=yellow | N/A=lightgray | yellow }}" | N/A
On-board FireWire OK=lime | TODO=red | No=red | WIP=orange | Untested=yellow | N/A=lightgray | yellow }}" | N/A
On-board Smartcard reader OK=lime | TODO=red | No=red | WIP=orange | Untested=yellow | N/A=lightgray | yellow }}" | N/A
On-board CompactFlash OK=lime | TODO=red | No=red | WIP=orange | Untested=yellow | N/A=lightgray | yellow }}" | OK Is wrired are primary drive on primary IDE controller.
On-board PCMCIA OK=lime | TODO=red | No=red | WIP=orange | Untested=yellow | N/A=lightgray | yellow }}" | OK Texas Instruments PCI1225 PCMCIA/Cardbus controller
On-board Wifi OK=lime | TODO=red | No=red | WIP=orange | Untested=yellow | N/A=lightgray | yellow }}" | N/A
On-board Bluetooth OK=lime | TODO=red | No=red | WIP=orange | Untested=yellow | N/A=lightgray | yellow }}" | N/A
On-board SD card reader OK=lime | TODO=red | No=red | WIP=orange | Untested=yellow | N/A=lightgray | yellow }}" | N/A
Add-on slots/cards
ISA add-on cards OK=lime | TODO=red | No=red | WIP=orange | Untested=yellow | N/A=lightgray | yellow }}" | N/A
Audio/Modem-Riser (AMR/CNR) cards OK=lime | TODO=red | No=red | WIP=orange | Untested=yellow | N/A=lightgray | yellow }}" | N/A
PCI add-on cards OK=lime | TODO=red | No=red | WIP=orange | Untested=yellow | N/A=lightgray | yellow }}" | OK Tested: With 4 Ethernet adapter card of Nokia (Compact-PCI slots)
Mini-PCI add-on cards OK=lime | TODO=red | No=red | WIP=orange | Untested=yellow | N/A=lightgray | yellow }}" | N/A
Mini-PCI-Express add-on cards OK=lime | TODO=red | No=red | WIP=orange | Untested=yellow | N/A=lightgray | yellow }}" | Unknown
PCI-X add-on cards OK=lime | TODO=red | No=red | WIP=orange | Untested=yellow | N/A=lightgray | yellow }}" | N/A
AGP graphics cards OK=lime | TODO=red | No=red | WIP=orange | Untested=yellow | N/A=lightgray | yellow }}" | N/A
PCI Express x1 add-on cards OK=lime | TODO=red | No=red | WIP=orange | Untested=yellow | N/A=lightgray | yellow }}" | N/A
PCI Express x2 add-on cards OK=lime | TODO=red | No=red | WIP=orange | Untested=yellow | N/A=lightgray | yellow }}" | N/A
PCI Express x4 add-on cards OK=lime | TODO=red | No=red | WIP=orange | Untested=yellow | N/A=lightgray | yellow }}" | N/A
PCI Express x8 add-on cards OK=lime | TODO=red | No=red | WIP=orange | Untested=yellow | N/A=lightgray | yellow }}" | N/A
PCI Express x16 add-on cards OK=lime | TODO=red | No=red | WIP=orange | Untested=yellow | N/A=lightgray | yellow }}" | N/A
PCI Express x32 add-on cards OK=lime | TODO=red | No=red | WIP=orange | Untested=yellow | N/A=lightgray | yellow }}" | N/A
HTX add-on cards OK=lime | TODO=red | No=red | WIP=orange | Untested=yellow | N/A=lightgray | yellow }}" | N/A
Legacy / Super I/O
Floppy OK=lime | TODO=red | No=red | WIP=orange | Untested=yellow | N/A=lightgray | yellow }}" | N/A
Serial port 1 (COM1) OK=lime | TODO=red | No=red | WIP=orange | Untested=yellow | N/A=lightgray | yellow }}" | OK
Serial port 2 (COM2) OK=lime | TODO=red | No=red | WIP=orange | Untested=yellow | N/A=lightgray | yellow }}" | OK
Parallel port OK=lime | TODO=red | No=red | WIP=orange | Untested=yellow | N/A=lightgray | yellow }}" | N/A
PS/2 keyboard OK=lime | TODO=red | No=red | WIP=orange | Untested=yellow | N/A=lightgray | yellow }}" | OK Internal 4 pin connector J-KBD
PS/2 mouse OK=lime | TODO=red | No=red | WIP=orange | Untested=yellow | N/A=lightgray | yellow }}" | N/A
Game port OK=lime | TODO=red | No=red | WIP=orange | Untested=yellow | N/A=lightgray | yellow }}" | N/A
Infrared OK=lime | TODO=red | No=red | WIP=orange | Untested=yellow | N/A=lightgray | yellow }}" | N/A
PC speaker OK=lime | TODO=red | No=red | WIP=orange | Untested=yellow | N/A=lightgray | yellow }}" | N/A
DiskOnChip OK=lime | TODO=red | No=red | WIP=orange | Untested=yellow | N/A=lightgray | yellow }}" | N/A
Input
Trackpoint OK=lime | TODO=red | No=red | WIP=orange | Untested=yellow | N/A=lightgray | yellow }}" | N/A
Touchpad OK=lime | TODO=red | No=red | WIP=orange | Untested=yellow | N/A=lightgray | yellow }}" | N/A
Fn Hotkeys OK=lime | TODO=red | No=red | WIP=orange | Untested=yellow | N/A=lightgray | yellow }}" | N/A
Fingerprint Reader OK=lime | TODO=red | No=red | WIP=orange | Untested=yellow | N/A=lightgray | yellow }}" | N/A
Laptop
Docking VGA OK=lime | TODO=red | No=red | WIP=orange | Untested=yellow | N/A=lightgray | yellow }}" | N/A
Docking LAN OK=lime | TODO=red | No=red | WIP=orange | Untested=yellow | N/A=lightgray | yellow }}" | N/A
Docking USB OK=lime | TODO=red | No=red | WIP=orange | Untested=yellow | N/A=lightgray | yellow }}" | N/A
Docking Audio OK=lime | TODO=red | No=red | WIP=orange | Untested=yellow | N/A=lightgray | yellow }}" | N/A
Docking Displayport OK=lime | TODO=red | No=red | WIP=orange | Untested=yellow | N/A=lightgray | yellow }}" | N/A
Thinklight OK=lime | TODO=red | No=red | WIP=orange | Untested=yellow | N/A=lightgray | yellow }}" | N/A
Webcam OK=lime | TODO=red | No=red | WIP=orange | Untested=yellow | N/A=lightgray | yellow }}" | N/A
Miscellaneous
Sensors / fan control OK=lime | TODO=red | No=red | WIP=orange | Untested=yellow | N/A=lightgray | yellow }}" | WIP
Hardware watchdog OK=lime | TODO=red | No=red | WIP=orange | Untested=yellow | N/A=lightgray | yellow }}" | N/A
SMBus OK=lime | TODO=red | No=red | WIP=orange | Untested=yellow | N/A=lightgray | yellow }}" | WIP
CAN bus OK=lime | TODO=red | No=red | WIP=orange | Untested=yellow | N/A=lightgray | yellow }}" | N/A
CPU frequency scaling OK=lime | TODO=red | No=red | WIP=orange | Untested=yellow | N/A=lightgray | yellow }}" | N/A
Other powersaving features OK=lime | TODO=red | No=red | WIP=orange | Untested=yellow | N/A=lightgray | yellow }}" | N/A
ACPI OK=lime | TODO=red | No=red | WIP=orange | Untested=yellow | N/A=lightgray | yellow }}" | No There's no ACPI implementation for this board, but it's on our TODO list.
Reboot OK=lime | TODO=red | No=red | WIP=orange | Untested=yellow | N/A=lightgray | yellow }}" | N/A
Poweroff OK=lime | TODO=red | No=red | WIP=orange | Untested=yellow | N/A=lightgray | yellow }}" | N/A
Suspend OK=lime | TODO=red | No=red | WIP=orange | Untested=yellow | N/A=lightgray | yellow }}" | Unknown
Nonstandard LEDs OK=lime | TODO=red | No=red | WIP=orange | Untested=yellow | N/A=lightgray | yellow }}" | OK Special-purpose LEDs available on the board, Alert and Fault are controlled by the superio
High precision event timers (HPET) OK=lime | TODO=red | No=red | WIP=orange | Untested=yellow | N/A=lightgray | yellow }}" | N/A
Random number generator (RNG) OK=lime | TODO=red | No=red | WIP=orange | Untested=yellow | N/A=lightgray | yellow }}" | N/A
Wake on modem ring OK=lime | TODO=red | No=red | WIP=orange | Untested=yellow | N/A=lightgray | yellow }}" | N/A
Wake on LAN OK=lime | TODO=red | No=red | WIP=orange | Untested=yellow | N/A=lightgray | yellow }}" | N/A
Wake on keyboard OK=lime | TODO=red | No=red | WIP=orange | Untested=yellow | N/A=lightgray | yellow }}" | N/A
Wake on mouse OK=lime | TODO=red | No=red | WIP=orange | Untested=yellow | N/A=lightgray | yellow }}" | N/A
TPM OK=lime | TODO=red | No=red | WIP=orange | Untested=yellow | N/A=lightgray | yellow }}" | Unknown
Flashrom OK=lime | TODO=red | No=red | WIP=orange | Untested=yellow | N/A=lightgray | yellow }}" | OK Supported flashrom revision 1010 or higher.

System Setup

On board of the IP530 can be found the following:

  • Pentium III.
  • I440BX northbridge.
  • 82371 southbridge.
  • intel 21150 PCI to PCI bridge.
  • 28F400, 512 Kbyte flashrom.
  • SMSC FDC37B787 superio with 1024 bits SPI eeprom attached.
  • LM78 power controller.
  • 4 intel 21143PD ethernet controllers with KS8716 PHY interface, with each a 1024 bits SPI eeprom attached.
  • Texas instruments PCI1225 PCMCIA/Cardbus controller with TPS22061 slot controller.
  • 4 SD-RAM sockets.

Below the description is given for the following;

  • For the connectors on the mainboard of the Nokia IP530, due missing documentation of the manufacturer.
  • To create a flash option board on the J-DEBUG connector.
  • To create a USB port.
  • HOWTO read the status of the jumpers.
  • HOWTO enable/disable the LEDs.
  • The layout of the SPI eeprom behind the SuperIO.

J-DEBUG

The JDEBUG connector can be used for attaching an external ROM (flash chip) to the board for BIOS development.

JDEBUG connector
Pin# Name Description Pin# Name Description
1 unknown ? 2 VCC +5 Volt n/a
3 A16 Address line A16 4 A18 Address line A18
5 A15 Address line A15 6 A17 Address line A17
7 A12 Address line A12 8 A14 Address line A14
9 A7 Address line A7 10 A13 Address line A13
11 A6 Address line A6 12 A8 Address line A8
13 A5 Address line A5 14 A9 Address line A9
15 A4 Address line A4 16 A11 Address line A11
17 A3 Address line A3 18 OE# Chip Enable Line OE#
19 A2 Address line A2 20 A10 Address line A10
21 A1 Address line A1 22 JP800.1 BIOSCS#
23 A0 Address line A0 24 D7 Data line D7
25 D0 Data line A0 26 D6 Data line D6
27 D1 Data line D1 28 D5 Data line D5
29 D2 Data line D2 30 D4 Data line D4
31 IOW# Control line IOW# 32 D3 Data line D3
33 GND Ground 34 IOR# Control line IOR#

For recovery there can be placed an flashrom board on the J-DEBUG connector. Belowe here the schematic in PDF can be used.

Schematic ROM option board

As wel the PCB layout in PDF, for this print it on a transparant paper in the highest quality (so it will be very black). From this a PCB can be made.

Printed Circuit Board (PCB) layout

The 34 pin connector shoud be female 90 degres, so that the board is upright when attached to the IP530. you can select a 32 DIL socket, 32 PLCC socket, but not both flashroms inserted only one at the time.

The overview can be used to place the components and solder them in. The red lines in the overview are wires that need to be soldered in.

Components overview PCB

When ready flash the rom in a programmer and inserted it into a socket. Attach the board to the main board of the IP530 (notice the PIN 1 of both boards, when you put it wrong the flashrom on the option board will be blown-up.


Jumper JP800 - BIOSCS select

This jumper selected the on-board flash or the J-DEBUG connector where the BIOSCS# line is routed.

J800 Jumper
Pin# Name Description
1 JDEBUG.P22 This is connected to PIN 22 of the JDEBUG connection on the board
2 BIOSCS# Connected to the ROMCS# line of the Northbridge
3 CS# This is connected to CS# of the on-board flash chip.

The WP# line of the on-board flashchip is controlled by Pin39 of the SMSC FDC37B787 Super I/O chip.

On the production boards the J800 is not present and the R814 (0 Ohm) is placed, remove this resistor and solder in the 3 pin-jumper for JP800. And place the jumper on position 2-3 to select the on-board flash chip.


Jumper JP900

This is a input signal on the Super I/O chip.

J900 Jumper
Pin# Name Description
1 GND Ground of the system
2 GPIO16 Pin 4 of the SMSC FDC37B787 Super I/O chip.

Pin 2 is pulled-up by resistor up VCC.

 #define REG_GP1x		0xF6
 #define JP900		        0x20
 
 sio_enter_config( 0x3F0 );
 val = (sio_read( 0x3F0, REG_GP6x ) & JP901);  
 sio_leave_config( 0x3F0 );



Jumper JP901

This is a input signal on the Super I/O chip.

J901 Jumper
Pin# Name Description
1 GND Ground of the system
2 GPIO67 Pin 90 of the SMSC FDC37B787 Super I/O chip.

Pin 2 is pulled-up by resistor up VCC.

 #define REG_GP6x		0xYY
 #define JP901		        0x80
 
 sio_enter_config( 0x3F0 );
 val = (sio_read( 0x3F0, REG_GP6x ) & JP901);  
 sio_leave_config( 0x3F0 );



Jumper JKBD

JKBD Connector
Pin# Name Description
1 VCC VCC +5 volt
2 DATA The DAT line of the PS2 keyboard (pin 70 SMSC FDC37B787)
3 CLOCK The CLK line of the PS2 keyboard (pin 71 SMSC FDC37B787)
4 GND Ground of the system

Front LEDs

LEDs in front
LED Control line Description
Fault FDC37B787-GP13 active low
Alert FDC37B787-GP17 active low
 #define REG_GP1x		0xF6
 #define LED_FAULT		0x08
 #define LED_ALERT		0x80
 
 sio_enter_config( 0x3F0 );
 val = sio_read( 0x3F0, REG_GP1x );
 
 // To enable the ALERT led
 val &= ~LED_ALERT;
 
 // To disable the ALERT led
 val |= LED_ALERT;
 
 // To enable the FAULT led
 val &= ~LED_FAULT;
 
 // To disable the FAULT led
 val |= LED_FAULT;
 
 sio_write( 0x3F0, REG_GP1x, val );
 sio_leave_config( 0x3F0 );

By using the sio_xxx() functions from flashrom, makes easy work dis-/en-abling the LEDs in the front.


EEPROM behide the SuperIO

EEPROM information
address range length Content Description
0x00-0x05 6 bytes IP530\x00 Product name
0x06-0x13 14 bytes 0x55 Filler
0x14-0x17 4 bytes 0x05,0x00,0x00,0x00 Unknown
0x18-0x1B 4 bytes 0x04,0x00,0x00,0x00 Unknown
0x1C-0x1F 4 bytes 0x03,0x00,0x00,0x00 Unknown
0x20-0x23 4 bytes 0x10,0x00,0x00,0x00 Unknown
0x24-0x29 6 bytes - Board number, sticker close to the PIII cpu
0x2A-0x37 14 bytes - Mfg. P/n (on the bottom side of the unit), filled out with spaces
0x38-0x3D 6 bytes 0x55 Filler
0x3E-0x3F 2 bytes 0xYY,0x00 Mfg. rev. (on the bottom side of the unit), 0xYY = is the revision letter, where A = 0x41, B = 0x42
0x40-0x51 18 bytes 0x55 Filler
0x52-0x5D 12 bytes - Serial number (on the bottom side of the unit)
0x5E-0x7D 32 bytes 0x55 Filler
0x7E-0x7F 2 bytes 0xFF,0xFF Unknown, probably the checksum value, but not used therefore filled 0xFFFF

On coreboot startup the eeprom is read, to determine if its a IP530, otherwise it get signaled. And the revision of the hardware. When its reads an unknown (at that time) herdware revision, revision B will be assumed.


Be aware when accessing the data the addresses above are byte address, they need to be converted in word addresses.


USB Connections

This requires two wires to be soldered on the backside of the mainboard, pictures will be added later

Ckick on the image to see a larger view

Put the mainboard upside down, and the power connector facing you. Find the footprint of the 82371 southbridge. Locate the two pads; i directly above (about 1.5 mm) the F1 pin of the SB, and 1 to left (about 15mm) of the A5 pin of the SB.

Solder two wires to the two pads, be aware that the USB lines are polarity sensitive !!!

                 _____
 USBPxP >---+---|_____|---+---------> USBPx+ to connector pin 3
            |     27R     |
            |            ---      * VCC 5 volt
          ----- 27pF     | | 15K  |
          -----          | |      |
            |            | |      +-> to connector pin 1
            |            --- 
            |             | 
 * GND  >---+-------------+---------> to connector pin 4
            |     27R     |
            |            ---
          ----- 27pF     | | 15K
          -----          | |
            |            | |
            |            ---
            |    _____    |
 USBPxN >---+---|_____|---+---------> USBPx- to connector pin 2
                  27R
 * pickup from somewhere on the board the power lines VCC 5 volt and GND (for instance on the JKBD connector pin 1 for VCC and pin 4 for GND)

With this you have succesful added the USB port on the Nokia-IP530. Below are the schematic and board layout in .PDF format for the USB interface.

Schematic USB interface board

Printed Circuit Board (PCB) layout

Components overview PCB



Installing/booting the Nokia-IP530

The IP530 came with 8, 16 and 32Mb CF cards. There is available for download a 32Mb image that will start with the vendor bios. This image which can be placed on the standard CF card of the IP530.

 #[sudo] dd of=/dev/<cf-card-device> if=./linux-nokia-ip530-coreboot.img

Download 32Mb CF card image (7.9Mb)

This is not a distrubution, but a lean and mean installation with a stable kernel. This image is intended to be used for upgrading, testing and developing coreboot on a x86 system.

Place the CF card in the slot of the IP530, connect a serial cross cable. get a terminal program (like putty) set the speed to 115200 Bps None, 8, 1 and boot up the IP530.

You must get a prompt.

When installing Linux on/for a Nokia-IP530, there are two ways; 1 use a donor PC or installation of a distro that uses the serial console for its installation. The kernel boot customation, must be something like this "apci=off console=ttyS0,115200n8" apci=off is nessary due that the Nokia-IP530 coreboot bios does'nt support APCI yet. Make sure that the ttyS0 is enabled in inittab, or some other place depending on the distro.


Other OSes

It should be posible to run any OS that is able to run without the following devices:

  • Videocard
  • Keyboard
  • Mouse
  • Floppy
  • Paralell port

OSes tested: Linux 2.6.32 and freeBSD 8.1 (unknown if all devices work as they work under Linux)

But NO windows :-)


TODO

  • Correctly setup the LM87 power management controller.
    • Right FAN-RPM at the backplane goes to PIN 6 of the LM87
    • Left FAN-RPM at the backplane goes to PIN 5 of the LM87
  • Support for board revisions other than A and B .

Flashing

Depending on the board revision, the board revision can be found on the bottom side of the IP530 or the inside of the machine, its on little stickers on the right-side of the board. There are currently to revisions (A/B) available doe the IP530.

 coreboot-nokia-ip530-board-rev-a.rom
 
 coreboot-nokia-ip530-board-rev-b.rom

Both rom images are on the Download 32Mb CF card image (7.9Mb)

For flashing the images read the documentation of flashrom. You need atleast Revision 1010 of flashrom.


Feedback

Havefun with your Nokia-IP530, any remarks about this please email me on pe2mbs@yahoo.co.uk

You can mail me too if you have a board revision that is not supported yet, you must be able to load the rom image "coreboot-nokia-ip530-board-rev-b.rom", but be prepared that maybe not all hardware is working.



GNU head This work is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation; either version 2 of the License, or any later version. This work is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details.