Board:via/epia

From coreboot
Jump to navigation Jump to search

The wiki is being retired!

Documentation is now handled by the same processes we use for code: Add something to the Documentation/ directory in the coreboot repo, and it will be rendered to https://doc.coreboot.org/. Contributions welcome!

Current problems

  • Mixing of memory widths appears to cause memory errors. The 256MB and 64MB DIMM from the table below show memory errors when installed together. Single-row memory might also be a problem, as the 128M single-row module gives errors. Double-row memory might also be a problem, as the 256M gives errors.
  • shutting down system does not turn off power.
  • Hangs at ram detection. Patch available 2007-06-04

Previous problems

  • MA map type is set incorrectly for some types of DIMM. Fixed as of r2653.

MA Map Types

The values for MA map type refer to bits 15-13, 7-5, and 3-1 of offset 0x59-0x58 of the VT8601A host bridge. See the VT8601/PLE133 data sheet for details. All values other than 0xx and 100 are documented as "reserved (do not program)"


Values determined by testing various modules with the factory BIOS.
DIMM size Row Density (SPD 31) Width (SPD 13) Rows(SPD 5) MA map type
512MB 256MB 8 2 0xe (111)
256MB 128MB 16 2 0xc (110)
128MB 128MB 16 1 0xc (110)
128MB 64MB 8 2 0x8 (100)
64MB 64MB 8 1 0x8 (100)
Public domain I, the copyright holder of this work, hereby release it into the public domain. This applies worldwide.

In case this is not legally possible:
I grant anyone the right to use this work for any purpose, without any conditions, unless such conditions are required by law.