Difference between revisions of "Build from Windows"
m (→Build the coreboot project)
m (→Test using simnow (optional, AMD projects only))
|Line 184:||Line 184:|
Next, the seabios payload executes:
Next, the seabios payload executes:
Latest revision as of 01:31, 2 April 2011
Coreboot firmware is most often built from the linux environment. Because many bios developers are more familiar with Windows than linux, it is useful to know how to build coreboot on a Windows system.
Setup the coreboot build environment (long method)
The gnu tools needed to build coreboot have already been ported to Windows. They must be downloaded, customized, and installed. Here are the steps:
- Download and install a native msys+mingw environment on your Windows computer.
- Build and install cross compile versions of binutils and gcc that run on Windows and target 32-bit x86 bare metal hardware.
Step 1 involves downloading and decompressing mingw and msys, both of which contain several components. See mingw.org for details. You may need to gather utilities and commands from various locations in order to end up with everything needed for building coreboot projects.
Step 2: Once msys+mingw is installed, download and build cross compiler versions of gcc and binutils that produce elf output for 32-bit x86. Use util/crossgcc/buildgcc for this purpose. Use msys.bat to start the msys+mingw environment, then execute these commands:
Administrator@M3A78 ~ $ mkdir /gcc450
Administrator@M3A78 ~ $ cd /gcc450/
Administrator@M3A78 /gcc450 $ /d/tmp/xgcc/coreboot/util/crossgcc/buildgcc Welcome to the coresystems cross toolchain builder v1.01 (May 18th, 2010)
Downloading tar balls ... * gmp-5.0.1.tar.bz2 (downloading)SYSTEM_WGETRC = c:/progra~1/wget/etc/wgetrc syswgetrc = D:\tmp\xgcc\msys/etc/wgetrc
* mpfr-2.4.2.tar.bz2 (downloading)SYSTEM_WGETRC = c:/progra~1/wget/etc/wgetrc syswgetrc = D:\tmp\xgcc\msys/etc/wgetrc
* mpc-0.8.2.tar.gz (downloading)SYSTEM_WGETRC = c:/progra~1/wget/etc/wgetrc syswgetrc = D:\tmp\xgcc\msys/etc/wgetrc
* libelf-0.8.13.tar.gz (downloading)SYSTEM_WGETRC = c:/progra~1/wget/etc/wgetrc syswgetrc = D:\tmp\xgcc\msys/etc/wgetrc
* gcc-core-4.5.0.tar.bz2 (downloading)SYSTEM_WGETRC = c:/progra~1/wget/etc/wgetrc syswgetrc = D:\tmp\xgcc\msys/etc/wgetrc
* binutils-2.20.1.tar.bz2 (downloading)SYSTEM_WGETRC = c:/progra~1/wget/etc/wgetrc syswgetrc = D:\tmp\xgcc\msys/etc/wgetrc
* gdb-7.1.tar.bz2 (downloading)SYSTEM_WGETRC = c:/progra~1/wget/etc/wgetrc syswgetrc = D:\tmp\xgcc\msys/etc/wgetrc
Downloaded tar balls ... ok Unpacking and patching ... * gmp-5.0.1.tar.bz2 * mpfr-2.4.2.tar.bz2 * mpc-0.8.2.tar.gz * libelf-0.8.13.tar.gz * gcc-core-4.5.0.tar.bz2 * binutils-2.20.1.tar.bz2 * gdb-7.1.tar.bz2 Unpacked and patched ... ok Building GMP 5.0.1 ... ok Building MPFR 2.4.2 ... ok Building MPC 0.8.2 ... ok Building libelf 0.8.13 ... ok Building binutils 2.20.1 ... ok Building GCC 4.5.0 ... ok Building GDB 7.1 ... ok Cleaning up... ok
You can now run your i386-elf cross toolchain from /gcc450/xgcc.
Setup the coreboot build environment (shortcut method)
Getting through steps 1 and 2 from scratch takes a bit of work. As a shortcut, a coreboot-ready msys+mingw is included in the sample project. Decompress the sample project into any directory on your Windows computer. Note: Avoid the use of spaces in the project path and directory name. In the top level of the sample project is directory msys. This is the complete coreboot-ready msys+mingw. The msys.bat file in this directory starts the msys+mingw build environment. Use the standard tool names (gcc, ld, as, ...) to generate output that targets the local Windows environment. To produce the i386-elf output used by coreboot, use the tools in the gcc452 directory. For example, gcc -c hello.c builds a Windows object, while /gcc452/xgcc/bin/i386-elf-gcc hello.c builds an i386-elf object.
In addition to the coreboot ready msys+mingw build environment, the sample project contains:
- coreboot directory. Replace this sample coreboot source code with the one you want to build.
- simnow directory. Sample helper files for testing the AMD Serengeti Cheetah (Fam10) project on the AMD simnow simulator.
- go.bat. This batch file sets up environment variables needed for cross compiling, and switches to the coreboot directory.
Build the coreboot project
Here are step-by-step instructions for building a coreboot based bios on a windows machine using the shortcut build environment setup method:
- 1. Decompress the sample project into any directory. Note: Avoid the use of spaces in the project path and directory name. Use 7-zip for decompression.
- 2. Replace the sample coreboot source code (rev 6474) with your own. The directory must be named coreboot.
- 3. Using Windows explorer, click on go.bat to start the build environment. It will look something like this:
Administrator@m3A78 /D/tmp/win-build-env-005/coreboot $ _
- 4. Now configure coreboot:
Administrator@m3A78 /D/tmp/win-build-env-005/coreboot $ make oldconfig
Answer the configuration questions. For this example, defaults were used for all questions except:
mainboard vendor : 3 AMD mainboard model : 9 Serengeti Cheetah (Fam10) rom chip size : 3 512 KB
- 5. At the $ prompt, type make. After a few seconds, the build should complete:
$ make (some output omitted) CC cpu/x86/pae/pgtbl.ramstage.o AR coreboot.a CC coreboot_ram.o CC coreboot_ram GIT SeaBIOS 1efb10b9ea30c45a8c9c6230234fefa10d2886ed Cloning into seabios... warning: templates not found D:\coreboot\msys/share/git-core/templates remote: Counting objects: 5951, done. remote: Compressing objects: 100% (1276/1276), done. remote: Total 5951 (delta 4720), reused 5879 (delta 4671) Receiving objects: 100% (5951/5951), 1.41 MiB | 288 KiB/s, done. Resolving deltas: 100% (4720/4720), done. Already on 'master' Switched to a new branch 'coreboot' CONFIG SeaBIOS 1efb10b9ea30c45a8c9c6230234fefa10d2886ed Build default config # # configuration written to d:/tmp/win-build-env-005/coreboot/payloads/external/SeaBIOS/seabios/.config # MAKE SeaBIOS 1efb10b9ea30c45a8c9c6230234fefa10d2886ed Build Kconfig config file d:/tmp/win-build-env-005/coreboot/payloads/external/SeaBIOS/seabios/.config:75:warning: override: reassigning to symbol COREBOOT d:/tmp/win-build-env-005/coreboot/payloads/external/SeaBIOS/seabios/.config:76:warning: override: reassigning to symbol DEBUG_SERIAL # # configuration written to d:/tmp/win-build-env-005/coreboot/payloads/external/SeaBIOS/seabios/.config # Compiling whole program out/ccode.16.s Compiling to assembler out/asm-offsets.s Generating offset file out/asm-offsets.h Compiling (16bit) out/code16.o Compiling whole program out/ccode32flat.o Compiling whole program out/code32seg.o Building ld scripts (version "pre-0.6.2-20110401_201116-m3a78") Fixed space: 0xe05b-0x10000 total: 8101 slack: 2 Percent slack: 0.0% 16bit size: 39408 32bit segmented size: 2416 32bit flat size: 14000 32bit flat init size: 39600 Linking out/rom16.o Stripping out/rom16.strip.o Linking out/rom32seg.o Stripping out/rom32seg.strip.o Linking out/rom.o Prepping out/bios.bin Total size: 96816 Fixed: 55832 Free: 34256 (used 73.9% of 128KiB rom) CBFS coreboot.rom PAYLOAD SeaBIOS (internal, compression: LZMA) CBFSPRINT coreboot.rom coreboot.rom: 512 kB, bootblocksize 2390, romsize 524288, offset 0x0 Alignment: 64 bytes Name Offset Type Size cmos_layout.bin 0x0 unknown 1776 fallback/romstage 0x740 stage 69698 fallback/coreboot_ram 0x117c0 stage 48127 fallback/payload 0x1d400 payload 48893 (empty) 0x29340 null 353058 Administrator@m3A78 /D/tmp/win-build-env-005/coreboot $ _
The final bios image is in file coreboot\build\coreboot.rom:
Directory of D:\tmp\win-build-env-005\coreboot\build 04/01/11 08:11 PM 524,288 coreboot.rom
Test using simnow (optional, AMD projects only)
The AMD simnow application is a software simulation of an AMD processor and reference board. Its accuracy is impressive, allowing it to boot an unmodified bios and operating system. To test the bios, download and install the public version of AMD's simnow. This example uses version simnow-win64-4.6.2pub.exe, a recent public version for Windows. Note that simnow requires a 64-bit operating system. Add an environment variable named simnow that points to the directory where simnow is installed:
From Windows explorer, launch coreboot\simnow\simnow.bat. This will open 3 windows:
Optionally, setup a boot cd-rom, floppy, or hard disk image:
Now, start the simulation by clicking the 'Run Simulation' button.
Putty will capture serial debug messages:
After a few seconds, video will appear:
Next, the seabios payload executes:
If the optional disk image was supplied, seabios will attempt to boot it:
Oops, some ACPI debugging is needed here...
Known problems with this demo
- The seabios PS/2 keyboard initialization is not reliable when run on the simnow target.
- Windows 7 bluescreen, above. This problem can be avoided by adding an I/O write to put the system into ACPI mode before giving control to Windows. Once this is done, another problem is encountered. Windows will stay at the animated startup logo for too long. Improperly reported interrupt routing is a possible cause.
Known problems with windows building
- Libncurses is not available, which prevents make menuconfig from building. Work-around: use make oldconfig instead.