Coreboot Options: Difference between revisions

From coreboot
Jump to navigation Jump to search
m (Bugfix.)
m (Ah, I like easy fixes :-))
Line 3: Line 3:
Last update: 2006/10/18 17:45:44.
Last update: 2006/10/18 17:45:44.


{| border="1"
{| border="0"
|- bgcolor="#6699dd"
|- bgcolor="#6699dd"
! align="left" | Option
! align="left" | Option

Revision as of 19:38, 19 October 2006

This is an automatically generated list of LinuxBIOS compile-time options.

Last update: 2006/10/18 17:45:44.

Option Comment Default Export Format

ARCH

"Default architecture is i386, options are alpha and ppc"

"i386"

always

HAVE_MOVNTI

"This cpu supports the MOVNTI directive"

0

always

CROSS_COMPILE

"Cross compiler prefix"

""

always

CC

"Target C Compiler"

"$(CROSS_COMPILE)gcc"

always

HOSTCC

"Host C Compiler"

"gcc"

always

CPU_OPT

"Additional per-cpu CFLAGS"

none

used

OBJCOPY

"Objcopy command"

"$(CROSS_COMPILE)objcopy --gap-fill 0xff"

always

LINUXBIOS_VERSION

"LinuxBIOS version"

"2.0.0"

always

"\"%s\""

LINUXBIOS_EXTRA_VERSION

"\"%s\""

LINUXBIOS_BUILD

"Build date"

"$(shell date)"

always

"\"%s\""

LINUXBIOS_COMPILE_TIME

"Build time"

"$(shell date +%T)"

always

"\"%s\""

LINUXBIOS_COMPILE_BY

"Who build this image"

"$(shell whoami)"

always

"\"%s\""

LINUXBIOS_COMPILE_HOST

"Build host"

"$(shell hostname)"

always

"\"%s\""

LINUXBIOS_COMPILE_DOMAIN

"Build domain name"

"$(shell dnsdomainname)"

always

"\"%s\""

LINUXBIOS_COMPILER

"Build compiler"

"$(shell $(CC) $(CFLAGS) -v 2>&1 | tail -n 1)"

always

"\"%s\""

LINUXBIOS_LINKER

"Build linker"

"$(shell $(CC) -Wl,--version 2>&1 | grep version | tail -n 1)"

always

"\"%s\""

LINUXBIOS_ASSEMBLER

"Build assembler"

"$(shell touch dummy.s ; $(CC) -c -Wa,-v dummy.s 2>&1; rm -f dummy.s dummy.o )"

always

"\"%s\""

CONFIG_CHIP_CONFIGURE

"Use new chip_configure method for configuring (non-pci) devices"

0

used

CONFIG_USE_INIT

"Use stage 1 initialization code"

0

always

HAVE_FALLBACK_BOOT

"Set if fallback booting required"

0

always

"%d"

HAVE_FAILOVER_BOOT

"Set if failover booting required"

0

always

"%d"

USE_FALLBACK_IMAGE

"Set to build a fallback image"

0

used

"%d"

USE_FAILOVER_IMAGE

FALLBACK_SIZE

"Default fallback image size"

65536

used

"0x%x"

FAILOVER_SIZE

ROM_SIZE

"Size of your ROM"

none

used

"0x%x"

ROM_IMAGE_SIZE

"Default image size"

65535

always

"0x%x"

ROM_SECTION_SIZE

"Default rom section size"

{FALLBACK_SIZE}

used

"0x%x"

ROM_SECTION_OFFSET

"Default rom section offset"

{ROM_SIZE - FALLBACK_SIZE}

used

"0x%x"

PAYLOAD_SIZE

"Default payload size"

{ROM_SECTION_SIZE - ROM_IMAGE_SIZE}

always

"0x%x"

_ROMBASE

"Base address of LinuxBIOS in ROM"

{PAYLOAD_SIZE}

always

"0x%x"

_ROMSTART

"Start address of LinuxBIOS in ROM"

none

used

"0x%x"

_RESET

"Hardware reset vector address"

{_ROMBASE}

always

"0x%x"

_EXCEPTION_VECTORS

"Address of exception vector table"

{_ROMBASE+0x100}

always

"0x%x"

STACK_SIZE

"Default stack size"

0x2000

always

"0x%x"

HEAP_SIZE

"Default heap size"

0x2000

always

"0x%x"

_RAMBASE

"Base address of LinuxBIOS in RAM"

none

always

"0x%x"

_RAMSTART

"Start address of LinuxBIOS in RAM"

none

used

"0x%x"

USE_DCACHE_RAM

"Use data cache as temporary RAM if possible"

0

always

DCACHE_RAM_BASE

"Base address of data cache when using it for temporary RAM"

0xc0000

always

"0x%x"

DCACHE_RAM_SIZE

"Size of data cache when using it for temporary RAM"

0x1000

always

"0x%x"

DCACHE_RAM_GLOBAL_VAR_SIZE

"Size of region that for global variable of cache as ram stage"

0

always

"0x%x"

CONFIG_AP_CODE_IN_CAR

MEM_TRAIN_SEQ

WAIT_BEFORE_CPUS_INIT

XIP_ROM_BASE

"Start address of area to cache during LinuxBIOS execution directly from ROM"

0

used

"0x%x"

XIP_ROM_SIZE

"Size of area to cache during LinuxBIOS execution directly from ROM"

0

used

"0x%x"

CONFIG_COMPRESS

"Set for compressed image"

1

always

CONFIG_UNCOMPRESSED

"Set for uncompressed image"

{!CONFIG_COMPRESS}

always

"%d"

CONFIG_LB_MEM_TOPK

"Kilobytes of memory to initialized before executing code from RAM"

2048

always

"%d"

HAVE_OPTION_TABLE

"Export CMOS option table"

0

always

USE_OPTION_TABLE

"Use option table"

{HAVE_OPTION_TABLE && !USE_FALLBACK_IMAGE}

always

"%d"

LB_CKS_RANGE_START

"First CMOS byte to use for LinuxBIOS options"

49

always

"%d"

LB_CKS_RANGE_END

"Last CMOS byte to use for LinuxBIOS options"

125

always

"%d"

LB_CKS_LOC

"Pair of bytes to use for CMOS checksum"

126

always

"%d"

CRT0

"Main initialization target"

"$(TOP)/src/arch/$(ARCH)/init/crt0.S.lb"

always

DEBUG

"Enable debugging code"

1

always

CONFIG_CONSOLE_VGA

"Log messages to VGA"

0

always

CONFIG_CONSOLE_VGA_MULTI

CONFIG_CONSOLE_VGA_ONBOARD_AT_FIRST

CONFIG_CONSOLE_BTEXT

CONFIG_CONSOLE_LOGBUF

"Log messages to buffer"

0

always

CONFIG_CONSOLE_SROM

"Log messages to SROM console"

0

always

CONFIG_CONSOLE_SERIAL8250

"Log messages to 8250 uart based serial console"

0

always

DEFAULT_CONSOLE_LOGLEVEL

"Console will log at this level unless changed"

7

always

MAXIMUM_CONSOLE_LOGLEVEL

8

always

CONFIG_SERIAL_POST

"Enable SERIAL POST codes"

0

always

NO_POST

"Disable POST codes"

none

used

TTYS0_BASE

"Base address for 8250 uart for the serial console"

0x3f8

always

"0x%x"

TTYS0_BAUD

"Default baud rate for serial console"

115200

always

TTYS0_DIV

"Allow UART divisor to be set explicitly"

none

used

"%d"

TTYS0_LCS

"Default flow control settings for the 8250 serial console uart"

0x3

always

"0x%x"

CONFIG_USE_PRINTK_IN_CAR

"use printk instead of print in CAR stage code"

0

always

MAINBOARD

"Mainboard name"

"Mainboard_not_set"

always

MAINBOARD_PART_NUMBER

"Part number of mainboard"

"Part_number_not_set"

always

"\"%s\""

MAINBOARD_VENDOR

"Vendor of mainboard"

"Vendor_not_set"

always

"\"%s\""

MAINBOARD_PCI_SUBSYSTEM_VENDOR_ID

"PCI Vendor ID of mainboard manufacturer"

0

always

MAINBOARD_PCI_SUBSYSTEM_DEVICE_ID

"PCI susbsystem device id assigned my mainboard manufacturer"

0

always

"0x%x"

MAINBOARD_POWER_ON_AFTER_POWER_FAIL

"Default power on after power fail setting"

none

used

CONFIG_SYS_CLK_FREQ

"System clock frequency in MHz"

none

used

CONFIG_MAX_PCI_BUSES

"Maximum number of PCI buses to search for devices"

255

always

CONFIG_SMP

"Define if we support SMP"

0

always

CONFIG_MAX_CPUS

CONFIG_MAX_PHYSICAL_CPUS

CONFIG_LOGICAL_CPUS

"Should multiple cpus per die be enabled?"

0

always

HAVE_MP_TABLE

"Define to build an MP table"

none

used

SERIAL_CPU_INIT

APIC_ID_OFFSET

"We need to share this value between cache_as_ram_auto.c and northbridge.c"

0

always

ENABLE_APIC_EXT_ID

"Enable APIC ext id mode 8 bit"

0

always

LIFT_BSP_APIC_ID

"decide if we lift bsp apic id while ap apic id"

0

always

CONFIG_IDE_STREAM

"Boot from IDE device"

0

always

CONFIG_ROM_STREAM

"Boot image is located in ROM"

0

always

CONFIG_ROM_STREAM_START

"ROM stream start location"

{0xffffffff - ROM_SIZE + ROM_SECTION_OFFSET + 1}

always

"0x%x"

CONFIG_COMPRESSED_ROM_STREAM

"compressed boot image is located in ROM and is assumed to be NRV2B (deprecated)"

0

always

CONFIG_COMPRESSED_ROM_STREAM_NRV2B

"NRV2B compressed boot image is located in ROM"

0

always

CONFIG_COMPRESSED_ROM_STREAM_LZMA

"LZMA compressed boot image is located in ROM"

0

always

CONFIG_PRECOMPRESSED_ROM_STREAM

"boot image is already compressed"

0

always

CONFIG_SERIAL_STREAM

"Download boot image from serial port"

0

always

CONFIG_FS_STREAM

"Boot from a filesystem"

0

always

CONFIG_FS_EXT2

"Enable ext2 filesystem support"

0

always

CONFIG_FS_ISO9660

"Enable ISO9660 filesystem support"

0

always

CONFIG_FS_FAT

"Enable FAT filesystem support"

0

always

AUTOBOOT_DELAY

"Delay (in seconds) before autobooting"

2

always

AUTOBOOT_CMDLINE

"Default command line when autobooting"

"hdc1:/vmlinuz root=/dev/hdc3 console=tty0 console=ttyS0,115200"

always

"\"%s\""

USE_WATCHDOG_ON_BOOT

"Use the watchdog on booting"

0

always

CONFIG_HYPERTRANSPORT_PLUGIN_SUPPORT

"Enable support for plugin Hypertransport busses"

1

always

CONFIG_AGP_PLUGIN_SUPPORT

"Enable support for plugin AGP busses"

1

always

CONFIG_CARDBUS_PLUGIN_SUPPORT

"Enable support cardbus plugin cards"

1

always

CONFIG_PCIX_PLUGIN_SUPPORT

"Enable support for plugin PCI-X busses"

1

always

CONFIG_PCIEXP_PLUGIN_SUPPORT

"Enable support for plugin PCI-E busses"

1

always

HAVE_PIRQ_TABLE

"Define if we have a PIRQ table"

none

used

IRQ_SLOT_COUNT

"Number of IRQ slots"

none

used

CONFIG_PCIBIOS_IRQ

"PCIBIOS IRQ support"

none

used

CONFIG_IOAPIC

"IOAPIC support"

none

used

CONFIG_IDE

"Define to include IDE support"

0

always

IDE_BOOT_DRIVE

"Disk number of boot drive"

0

always

IDE_SWAB

"Swap bytes when reading from IDE device"

none

used

IDE_OFFSET

"Sector at which to start searching for boot image"

0

always

PCI_IO_CFG_EXT

"allow 4K register space via io CFG port"

0

always

PCIC0_CFGADDR

"Address of PCI Configuration Address Register"

none

used

"0x%x"

PCIC0_CFGDATA

"Address of PCI Configuration Data Register"

none

used

"0x%x"

ISA_IO_BASE

"Base address of PCI/ISA I/O address range"

none

used

"0x%x"

ISA_MEM_BASE

"Base address of PCI/ISA memory address range"

none

used

"0x%x"

PNP_CFGADDR

"PNP Configuration Address Register offset"

none

used

"0x%x"

PNP_CFGDATA

"PNP Configuration Data Register offset"

none

used

"0x%x"

_IO_BASE

"Base address of memory mapped I/O operations"

none

used

"0x%x"

EMBEDDED_RAM_SIZE

"Embedded boards generally have fixed RAM size"

none

used

CONFIG_CHIP_NAME

"Compile in the chip name"

0

always

CONFIG_GDB_STUB

"Compile in gdb stub support?"

0

used

HAVE_INIT_TIMER

"Have a init_timer function"

0

always

HAVE_HARD_RESET

"Have hard reset"

none

used

MEMORY_HOLE

"Set to deal with memory hole"

none

used

MAX_REBOOT_CNT

"Set maximum reboots"

3

always

CONFIG_TSC_X86RDTSC_CALIBRATE_WITH_TIMER2

"Use timer2 to callibrate the x86 time stamp counter"

0

used

INTEL_PPRO_MTRR

""

none

used

CONFIG_UDELAY_TSC

"Implement udelay with the x86 time stamp counter"

0

used

CONFIG_UDELAY_IO

"Implement udelay with x86 io registers"

0

used

FAKE_SPDROM

"Use this to fake spd rom values"

0

always

HAVE_ACPI_TABLES

"Define to build ACPI tables"

0

always

ACPI_SSDTX_NUM

"extra ssdt num for PCI Device"

0

always

AGP_APERTURE_SIZE

"AGP graphics virtual memory aperture size"

none

used

"0x%x"

HT_CHAIN_UNITID_BASE

"this will be first hypertransport device's unitid base, if sb ht chain only has one ht device, it could be 0"

1

always

HT_CHAIN_END_UNITID_BASE

SB_HT_CHAIN_UNITID_OFFSET_ONLY

SB_HT_CHAIN_ON_BUS0

PCI_BUS_SEGN_BITS

MMCONF_SUPPORT

"enable mmconfig for pci conf"

0

always

HW_MEM_HOLE_SIZEK

HW_MEM_HOLE_SIZE_AUTO_INC

K8_HT_FREQ_1G_SUPPORT

"Optern E0 later could support 1G HT, but still depends MB design"

0

always

K8_REV_F_SUPPORT

CBB

"Opteron cpu bus num base"

0

always

CDB

"Opteron cpu device num base"

0x18

always

DIMM_SUPPORT

"0x%x"

CPU_SOCKET_TYPE

"cpu socket type, 0x10 mean Socket F, 0x11 mean socket M2, 0x20, Soxket G, and 0x21 mean socket M3"

0x10

always

CPU_ADDR_BITS

"CPU hardware address lines num, for AMD K8 could be 40, and GH could be 48"

36

always

CONFIG_PCI_ROM_RUN

"Init PCI device option rom"

0

always

CONFIG_PCI_64BIT_PREF_MEM

CONFIG_VIDEO_MB

CONFIG_SANDPOINT_ALTIMUS

"Configure Sandpoint with Altimus PMC"

0

never

CONFIG_SANDPOINT_TALUS

"Configure Sandpoint with Talus PMC"

0

never

CONFIG_SANDPOINT_UNITY

"Configure Sandpoint with Unity PMC"

0

never

CONFIG_SANDPOINT_VALIS

"Configure Sandpoint with Valis PMC"

0

never

CONFIG_SANDPOINT_GYRUS

"Configure Sandpoint with Gyrus PMC"

0

never

CONFIG_BRIQ_750FX

"Configure briQ with PowerPC 750FX"

0

never

CONFIG_BRIQ_7400

"Configure briQ with PowerPC G4"

0

never